! Started logfile: /g0/scr/pima/npcsc_uvs/J1218+7934_S_uvs.log on Sun Oct  6 14:28:45 2013
obs /g0/scr/pima/npcsc_uvs/J1218+7934_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J1218+7934_S_uva.fits
! AN table 1: 46 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.619048 visibilities/baseline/integration-bin.
! Found source: J1218+7934
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 2392 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J1218+7934_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.007247Jy  sigma=0.845178
! Fit after  self-cal, rms=0.934257Jy  sigma=0.736429
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.498 mas, bmaj=13.56 mas, bpa=11.2 degrees
! Estimated noise=41.1503 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0692615 Jy
! Component: 100  -  total flux cleaned = 0.0841996 Jy
! Total flux subtracted in 100 components = 0.0841996 Jy
! Clean residual min=-0.008591 max=0.008462 Jy/beam
! Clean residual mean=0.000017 rms=0.003209 Jy/beam
! Combined flux in latest and established models = 0.0841996 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.0841996 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081727Jy  sigma=0.075689
! Fit after  self-cal, rms=0.080177Jy  sigma=0.074749
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.751 mas, bmaj=15.69 mas, bpa=18.25 degrees
! Estimated noise=19.4806 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00459142 Jy
! Component: 100  -  total flux cleaned = 0.006044 Jy
! Component: 150  -  total flux cleaned = 0.00920453 Jy
! Component: 200  -  total flux cleaned = 0.0124075 Jy
! Total flux subtracted in 200 components = 0.0124075 Jy
! Clean residual min=-0.004702 max=0.004714 Jy/beam
! Clean residual mean=0.000013 rms=0.001977 Jy/beam
! Combined flux in latest and established models = 0.096607 Jy
! Performing phase self-cal
! Adding 99 model components to the UV plane model.
! The established model now contains 117 components and 0.096607 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079560Jy  sigma=0.066534
! Fit after  self-cal, rms=0.078895Jy  sigma=0.066206
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.78     FD        0.93     KP        0.86     LA        1.06     
!   NL        0.89     OV        0.97     PT        0.93     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.88     KP        0.95     LA        0.99     
!   NL        0.89     OV        0.91     PT        0.83     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.15     FD        0.92     KP        0.86     LA        0.78     
!   NL        0.88     OV        0.91     PT        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.95     KP        0.91     LA        0.66     
!   NL        0.91     OV        0.86     PT        0.88     
! 
! 
! Fit before self-cal, rms=0.078895Jy  sigma=0.066206
! Fit after  self-cal, rms=0.069699Jy  sigma=0.059860
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.84 mas, bmaj=15.92 mas, bpa=17.67 degrees
! Estimated noise=15.581 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0130293 Jy
! Component: 100  -  total flux cleaned = -0.0115498 Jy
! Component: 150  -  total flux cleaned = -0.0108053 Jy
! Component: 200  -  total flux cleaned = -0.010174 Jy
! Total flux subtracted in 200 components = -0.010174 Jy
! Clean residual min=-0.001380 max=0.001395 Jy/beam
! Clean residual mean=0.000006 rms=0.000543 Jy/beam
! Combined flux in latest and established models = 0.086433 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 161 components and 0.0864331 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062871Jy  sigma=0.061701
! Fit after  self-cal, rms=0.062569Jy  sigma=0.061408
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062569Jy  sigma=0.061408
! Fit after  self-cal, rms=0.057756Jy  sigma=0.059196
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.715 mas, bmaj=15.79 mas, bpa=17.47 degrees
! Estimated noise=13.0415 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0106903 Jy
! Component: 100  -  total flux cleaned = -0.012457 Jy
! Component: 150  -  total flux cleaned = -0.0127563 Jy
! Component: 200  -  total flux cleaned = -0.0127619 Jy
! Total flux subtracted in 200 components = -0.0127619 Jy
! Clean residual min=-0.000964 max=0.000962 Jy/beam
! Clean residual mean=0.000002 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.0736712 Jy
selfcal
! Performing phase self-cal
! Adding 66 model components to the UV plane model.
! The established model now contains 222 components and 0.0736712 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052264Jy  sigma=0.061129
! Fit after  self-cal, rms=0.052160Jy  sigma=0.061068
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000927903 Jy
! Component: 100  -  total flux cleaned = 0.00130694 Jy
! Component: 150  -  total flux cleaned = 0.00158162 Jy
! Component: 200  -  total flux cleaned = 0.00183421 Jy
! Total flux subtracted in 200 components = 0.00183421 Jy
! Clean residual min=-0.000816 max=0.000815 Jy/beam
! Clean residual mean=0.000002 rms=0.000322 Jy/beam
! Combined flux in latest and established models = 0.0755054 Jy
! Performing phase self-cal
! Adding 76 model components to the UV plane model.
! The established model now contains 287 components and 0.0755054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051912Jy  sigma=0.061036
! Fit after  self-cal, rms=0.051859Jy  sigma=0.061004
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051859Jy  sigma=0.061004
! Fit after  self-cal, rms=0.047589Jy  sigma=0.058700
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.588 mas, bmaj=15.71 mas, bpa=17.55 degrees
! Estimated noise=10.8265 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00863715 Jy
! Component: 100  -  total flux cleaned = -0.0102407 Jy
! Component: 150  -  total flux cleaned = -0.0109321 Jy
! Component: 200  -  total flux cleaned = -0.0111728 Jy
! Total flux subtracted in 200 components = -0.0111728 Jy
! Clean residual min=-0.000604 max=0.000602 Jy/beam
! Clean residual mean=-0.000001 rms=0.000236 Jy/beam
! Combined flux in latest and established models = 0.0643327 Jy
selfcal
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 340 components and 0.0643327 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.043176Jy  sigma=0.060695
! Fit after  self-cal, rms=0.043110Jy  sigma=0.060645
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000219707 Jy
! Component: 100  -  total flux cleaned = -0.000187225 Jy
! Component: 150  -  total flux cleaned = -0.000223493 Jy
! Component: 200  -  total flux cleaned = -3.08322e-05 Jy
! Total flux subtracted in 200 components = -3.08322e-05 Jy
! Clean residual min=-0.000525 max=0.000516 Jy/beam
! Clean residual mean=-0.000000 rms=0.000204 Jy/beam
! Combined flux in latest and established models = 0.0643018 Jy
! Performing phase self-cal
! Adding 67 model components to the UV plane model.
! The established model now contains 392 components and 0.0643018 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.042957Jy  sigma=0.060688
! Fit after  self-cal, rms=0.042945Jy  sigma=0.060660
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.042945Jy  sigma=0.060660
! Fit after  self-cal, rms=0.039500Jy  sigma=0.058373
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.7 mas, bmaj=17.66 mas, bpa=23.44 degrees
! Estimated noise=9.08383 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00712197 Jy
! Component: 100  -  total flux cleaned = -0.00786253 Jy
! Component: 150  -  total flux cleaned = -0.00787585 Jy
! Component: 200  -  total flux cleaned = -0.00784565 Jy
! Total flux subtracted in 200 components = -0.00784565 Jy
! Clean residual min=-0.000503 max=0.000499 Jy/beam
! Clean residual mean=-0.000003 rms=0.000206 Jy/beam
! Combined flux in latest and established models = 0.0564562 Jy
selfcal
! Performing phase self-cal
! Adding 72 model components to the UV plane model.
! The established model now contains 457 components and 0.0564562 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.035943Jy  sigma=0.060387
! Fit after  self-cal, rms=0.035881Jy  sigma=0.060328
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000441831 Jy
! Component: 100  -  total flux cleaned = -0.000783614 Jy
! Component: 150  -  total flux cleaned = -0.000974818 Jy
! Component: 200  -  total flux cleaned = -0.0011309 Jy
! Total flux subtracted in 200 components = -0.0011309 Jy
! Clean residual min=-0.000364 max=0.000365 Jy/beam
! Clean residual mean=-0.000002 rms=0.000142 Jy/beam
! Combined flux in latest and established models = 0.0553253 Jy
! Performing phase self-cal
! Adding 65 model components to the UV plane model.
! The established model now contains 512 components and 0.0553253 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.035749Jy  sigma=0.060440
! Fit after  self-cal, rms=0.035734Jy  sigma=0.060274
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=9.464 mas, bmaj=15.64 mas, bpa=17.71 degrees
! Estimated noise=8.96536 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.464 x 15.64 at 17.71 degrees (North through East)
! Clean map  min=-0.0050469  max=0.037225 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.307 mas, bmaj=13.59 mas, bpa=10.61 degrees
! Estimated noise=18.3366 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0306305 Jy
! Component: 100  -  total flux cleaned = 0.0388756 Jy
! Component: 150  -  total flux cleaned = 0.0406665 Jy
! Component: 200  -  total flux cleaned = 0.0428992 Jy
! Total flux subtracted in 200 components = 0.0428992 Jy
! Clean residual min=-0.003664 max=0.003666 Jy/beam
! Clean residual mean=0.000009 rms=0.001452 Jy/beam
! Combined flux in latest and established models = 0.0428992 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 72 model components to the UV plane model.
! The established model now contains 72 components and 0.0428992 Jy
! Inverting map and beam 
! Estimated beam: bmin=9.464 mas, bmaj=15.64 mas, bpa=17.71 degrees
! Estimated noise=8.96536 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00259489 Jy
! Component: 100  -  total flux cleaned = 0.00308767 Jy
! Component: 150  -  total flux cleaned = 0.00219179 Jy
! Component: 200  -  total flux cleaned = 0.00218166 Jy
! Total flux subtracted in 200 components = 0.00218166 Jy
! Clean residual min=-0.002244 max=0.002219 Jy/beam
! Clean residual mean=0.000005 rms=0.000932 Jy/beam
! Combined flux in latest and established models = 0.0450808 Jy
! Adding 92 model components to the UV plane model.
! The established model now contains 158 components and 0.0450808 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.7 mas, bmaj=17.66 mas, bpa=23.44 degrees
! Estimated noise=9.08383 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00142923 Jy
! Component: 100  -  total flux cleaned = 0.0021401 Jy
! Component: 150  -  total flux cleaned = 0.00283692 Jy
! Component: 200  -  total flux cleaned = 0.00337615 Jy
! Total flux subtracted in 200 components = 0.00337615 Jy
! Clean residual min=-0.001210 max=0.001207 Jy/beam
! Clean residual mean=0.000003 rms=0.000503 Jy/beam
! Combined flux in latest and established models = 0.048457 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000207573 Jy
! Component: 100  -  total flux cleaned = 0.000404992 Jy
! Component: 150  -  total flux cleaned = 0.000285833 Jy
! Component: 200  -  total flux cleaned = 0.000286356 Jy
! Total flux subtracted in 200 components = 0.000286356 Jy
! Clean residual min=-0.000957 max=0.000952 Jy/beam
! Clean residual mean=0.000001 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.0487433 Jy
! Adding 133 model components to the UV plane model.
! The established model now contains 288 components and 0.0487433 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=9.464 mas, bmaj=15.64 mas, bpa=17.71 degrees
! Estimated noise=8.96536 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.45615e-05 Jy
! Component: 100  -  total flux cleaned = 0.000129306 Jy
! Component: 150  -  total flux cleaned = 0.000432001 Jy
! Component: 200  -  total flux cleaned = 0.000643983 Jy
! Total flux subtracted in 200 components = 0.000643983 Jy
! Clean residual min=-0.000575 max=0.000575 Jy/beam
! Clean residual mean=0.000001 rms=0.000231 Jy/beam
! Combined flux in latest and established models = 0.0493873 Jy
selfcal
! Performing phase self-cal
! Adding 76 model components to the UV plane model.
! The established model now contains 363 components and 0.0493873 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.035728Jy  sigma=0.060807
! Fit after  self-cal, rms=0.035763Jy  sigma=0.060735
wmodel /g0/scr/pima/npcsc_uvs/J1218+7934_S_map.mod
! Writing 363 model components to file: /g0/scr/pima/npcsc_uvs/J1218+7934_S_map.mod
wobs /g0/scr/pima/npcsc_uvs/J1218+7934_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J1218+7934_S_uvs.fits
wwins /g0/scr/pima/npcsc_uvs/J1218+7934_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/g0/scr/pima/npcsc_uvs/J1218+7934_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.464 x 15.64 at 17.71 degrees (North through East)
! Clean map  min=-0.0043811  max=0.030827 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J1218+7934_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0308269 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000225986 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.19924 2.19924 4.39848 8.79697 17.5939 35.1879 70.3757
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0006 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.03 
quit
! Quitting program
! Log file /g0/scr/pima/npcsc_uvs/J1218+7934_S_uvs.log closed on Sun Oct  6 14:28:48 2013