! Started logfile: /g0/scr/pima/npcsc_uvs/J1057+8858_S_uvs.log on Sun Oct  6 14:28:13 2013
obs /g0/scr/pima/npcsc_uvs/J1057+8858_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J1057+8858_S_uva.fits
! AN table 1: 46 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.761905 visibilities/baseline/integration-bin.
! Found source: J1057+8858
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 2944 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J1057+8858_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.010951Jy  sigma=0.917918
! Fit after  self-cal, rms=0.925566Jy  sigma=0.780004
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.556 mas, bmaj=16.12 mas, bpa=-5.054 degrees
! Estimated noise=28.8129 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0813422 Jy
! Component: 100  -  total flux cleaned = 0.101027 Jy
! Total flux subtracted in 100 components = 0.101027 Jy
! Clean residual min=-0.011787 max=0.011988 Jy/beam
! Clean residual mean=0.000074 rms=0.004159 Jy/beam
! Combined flux in latest and established models = 0.101027 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.101027 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090313Jy  sigma=0.091085
! Fit after  self-cal, rms=0.087713Jy  sigma=0.089506
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.388 mas, bmaj=17.1 mas, bpa=-4.611 degrees
! Estimated noise=16.2781 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0222578 Jy
! Component: 100  -  total flux cleaned = 0.0305077 Jy
! Component: 150  -  total flux cleaned = 0.0347945 Jy
! Component: 200  -  total flux cleaned = 0.0381931 Jy
! Total flux subtracted in 200 components = 0.0381931 Jy
! Clean residual min=-0.004696 max=0.004698 Jy/beam
! Clean residual mean=0.000060 rms=0.001896 Jy/beam
! Combined flux in latest and established models = 0.13922 Jy
! Performing phase self-cal
! Adding 110 model components to the UV plane model.
! The established model now contains 137 components and 0.13922 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086931Jy  sigma=0.079325
! Fit after  self-cal, rms=0.086500Jy  sigma=0.078945
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.86     KP        0.86     LA        1.20     
!   NL        0.84     OV        1.09     PT        0.87     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.81     FD        0.82     KP        0.94     LA        0.97     
!   NL        0.85     OV        0.99     PT        0.90     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.01     KP        0.90     LA        0.85     
!   NL        1.03     OV        0.96     PT        0.92     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        1.05     KP        0.86     LA        0.68     
!   NL        0.81     OV        0.83     PT        0.87     
! 
! 
! Fit before self-cal, rms=0.086500Jy  sigma=0.078945
! Fit after  self-cal, rms=0.077867Jy  sigma=0.071856
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.388 mas, bmaj=17.19 mas, bpa=-5.54 degrees
! Estimated noise=13.2821 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0138909 Jy
! Component: 100  -  total flux cleaned = -0.0132795 Jy
! Component: 150  -  total flux cleaned = -0.013035 Jy
! Component: 200  -  total flux cleaned = -0.0128402 Jy
! Total flux subtracted in 200 components = -0.0128402 Jy
! Clean residual min=-0.001534 max=0.001533 Jy/beam
! Clean residual mean=-0.000005 rms=0.000572 Jy/beam
! Combined flux in latest and established models = 0.12638 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 177 components and 0.12638 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070856Jy  sigma=0.073820
! Fit after  self-cal, rms=0.070863Jy  sigma=0.073693
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070863Jy  sigma=0.073693
! Fit after  self-cal, rms=0.065591Jy  sigma=0.071394
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.223 mas, bmaj=17.06 mas, bpa=-5.739 degrees
! Estimated noise=11.2645 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0114688 Jy
! Component: 100  -  total flux cleaned = -0.0139159 Jy
! Component: 150  -  total flux cleaned = -0.0141602 Jy
! Component: 200  -  total flux cleaned = -0.0137106 Jy
! Total flux subtracted in 200 components = -0.0137106 Jy
! Clean residual min=-0.001014 max=0.001015 Jy/beam
! Clean residual mean=-0.000001 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 0.112669 Jy
selfcal
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 231 components and 0.112669 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059953Jy  sigma=0.073554
! Fit after  self-cal, rms=0.059914Jy  sigma=0.073520
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000480066 Jy
! Component: 100  -  total flux cleaned = 0.000717157 Jy
! Component: 150  -  total flux cleaned = 0.000876796 Jy
! Component: 200  -  total flux cleaned = 0.000876765 Jy
! Total flux subtracted in 200 components = 0.000876765 Jy
! Clean residual min=-0.000808 max=0.000801 Jy/beam
! Clean residual mean=-0.000000 rms=0.000320 Jy/beam
! Combined flux in latest and established models = 0.113546 Jy
! Performing phase self-cal
! Adding 66 model components to the UV plane model.
! The established model now contains 293 components and 0.113546 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059691Jy  sigma=0.073534
! Fit after  self-cal, rms=0.059675Jy  sigma=0.073518
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059675Jy  sigma=0.073518
! Fit after  self-cal, rms=0.055082Jy  sigma=0.071064
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.056 mas, bmaj=16.92 mas, bpa=-5.761 degrees
! Estimated noise=9.51933 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00916792 Jy
! Component: 100  -  total flux cleaned = -0.010817 Jy
! Component: 150  -  total flux cleaned = -0.0108755 Jy
! Component: 200  -  total flux cleaned = -0.0106977 Jy
! Total flux subtracted in 200 components = -0.0106977 Jy
! Clean residual min=-0.000708 max=0.000710 Jy/beam
! Clean residual mean=-0.000000 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.102848 Jy
selfcal
! Performing phase self-cal
! Adding 66 model components to the UV plane model.
! The established model now contains 351 components and 0.102848 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050621Jy  sigma=0.073277
! Fit after  self-cal, rms=0.050458Jy  sigma=0.073148
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000154322 Jy
! Component: 100  -  total flux cleaned = 7.74055e-05 Jy
! Component: 150  -  total flux cleaned = 0.000397509 Jy
! Component: 200  -  total flux cleaned = 0.00073416 Jy
! Total flux subtracted in 200 components = 0.00073416 Jy
! Clean residual min=-0.000550 max=0.000547 Jy/beam
! Clean residual mean=-0.000000 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.103583 Jy
! Performing phase self-cal
! Adding 74 model components to the UV plane model.
! The established model now contains 411 components and 0.103582 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050305Jy  sigma=0.073222
! Fit after  self-cal, rms=0.050303Jy  sigma=0.073215
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050303Jy  sigma=0.073215
! Fit after  self-cal, rms=0.046567Jy  sigma=0.070734
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.259 mas, bmaj=17.88 mas, bpa=-3.993 degrees
! Estimated noise=8.25301 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00795944 Jy
! Component: 100  -  total flux cleaned = -0.00937776 Jy
! Component: 150  -  total flux cleaned = -0.00941777 Jy
! Component: 200  -  total flux cleaned = -0.009612 Jy
! Total flux subtracted in 200 components = -0.009612 Jy
! Clean residual min=-0.000569 max=0.000572 Jy/beam
! Clean residual mean=-0.000000 rms=0.000217 Jy/beam
! Combined flux in latest and established models = 0.0939705 Jy
selfcal
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 463 components and 0.0939705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.042800Jy  sigma=0.073018
! Fit after  self-cal, rms=0.042776Jy  sigma=0.072983
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000283555 Jy
! Component: 100  -  total flux cleaned = -0.000343952 Jy
! Component: 150  -  total flux cleaned = -0.000317843 Jy
! Component: 200  -  total flux cleaned = -0.000144586 Jy
! Total flux subtracted in 200 components = -0.000144586 Jy
! Clean residual min=-0.000398 max=0.000401 Jy/beam
! Clean residual mean=0.000000 rms=0.000154 Jy/beam
! Combined flux in latest and established models = 0.0938259 Jy
! Performing phase self-cal
! Adding 75 model components to the UV plane model.
! The established model now contains 532 components and 0.0938259 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.042655Jy  sigma=0.073072
! Fit after  self-cal, rms=0.042660Jy  sigma=0.073067
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=7.899 mas, bmaj=16.79 mas, bpa=-5.777 degrees
! Estimated noise=8.02971 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.899 x 16.79 at -5.777 degrees (North through East)
! Clean map  min=-0.0041544  max=0.049307 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.037 mas, bmaj=15.89 mas, bpa=-5.48 degrees
! Estimated noise=14.2683 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0415354 Jy
! Component: 100  -  total flux cleaned = 0.0577631 Jy
! Component: 150  -  total flux cleaned = 0.0656217 Jy
! Component: 200  -  total flux cleaned = 0.0679872 Jy
! Total flux subtracted in 200 components = 0.0679872 Jy
! Clean residual min=-0.004214 max=0.004258 Jy/beam
! Clean residual mean=0.000026 rms=0.001685 Jy/beam
! Combined flux in latest and established models = 0.0679872 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 77 model components to the UV plane model.
! The established model now contains 77 components and 0.0679872 Jy
! Inverting map and beam 
! Estimated beam: bmin=7.899 mas, bmaj=16.79 mas, bpa=-5.777 degrees
! Estimated noise=8.02971 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00427168 Jy
! Component: 100  -  total flux cleaned = 0.00485447 Jy
! Component: 150  -  total flux cleaned = 0.00530783 Jy
! Component: 200  -  total flux cleaned = 0.00646337 Jy
! Total flux subtracted in 200 components = 0.00646337 Jy
! Clean residual min=-0.001935 max=0.001944 Jy/beam
! Clean residual mean=0.000025 rms=0.000829 Jy/beam
! Combined flux in latest and established models = 0.0744506 Jy
! Adding 86 model components to the UV plane model.
! The established model now contains 163 components and 0.0744506 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.259 mas, bmaj=17.88 mas, bpa=-3.993 degrees
! Estimated noise=8.25301 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000518221 Jy
! Component: 100  -  total flux cleaned = 0.000920593 Jy
! Component: 150  -  total flux cleaned = 0.0015064 Jy
! Component: 200  -  total flux cleaned = 0.0018881 Jy
! Total flux subtracted in 200 components = 0.0018881 Jy
! Clean residual min=-0.001143 max=0.001161 Jy/beam
! Clean residual mean=0.000019 rms=0.000490 Jy/beam
! Combined flux in latest and established models = 0.0763387 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000467761 Jy
! Component: 100  -  total flux cleaned = 0.000937016 Jy
! Component: 150  -  total flux cleaned = 0.00141604 Jy
! Component: 200  -  total flux cleaned = 0.00166109 Jy
! Total flux subtracted in 200 components = 0.00166109 Jy
! Clean residual min=-0.000795 max=0.000789 Jy/beam
! Clean residual mean=0.000015 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 0.0779998 Jy
! Adding 142 model components to the UV plane model.
! The established model now contains 296 components and 0.0779997 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=7.899 mas, bmaj=16.79 mas, bpa=-5.777 degrees
! Estimated noise=8.02971 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000518517 Jy
! Component: 100  -  total flux cleaned = -0.00047979 Jy
! Component: 150  -  total flux cleaned = -0.000668296 Jy
! Component: 200  -  total flux cleaned = -0.000738693 Jy
! Total flux subtracted in 200 components = -0.000738693 Jy
! Clean residual min=-0.000567 max=0.000565 Jy/beam
! Clean residual mean=0.000007 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.077261 Jy
selfcal
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 361 components and 0.077261 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.042719Jy  sigma=0.073560
! Fit after  self-cal, rms=0.042726Jy  sigma=0.073498
wmodel /g0/scr/pima/npcsc_uvs/J1057+8858_S_map.mod
! Writing 361 model components to file: /g0/scr/pima/npcsc_uvs/J1057+8858_S_map.mod
wobs /g0/scr/pima/npcsc_uvs/J1057+8858_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J1057+8858_S_uvs.fits
wwins /g0/scr/pima/npcsc_uvs/J1057+8858_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/g0/scr/pima/npcsc_uvs/J1057+8858_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.899 x 16.79 at -5.777 degrees (North through East)
! Clean map  min=-0.0021865  max=0.04566 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J1057+8858_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0456601 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000202992 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.33372 1.33372 2.66743 5.33486 10.6697 21.3395 42.6789 85.3578
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0006 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.045 
quit
! Quitting program
! Log file /g0/scr/pima/npcsc_uvs/J1057+8858_S_uvs.log closed on Sun Oct  6 14:28:16 2013