! Started logfile: /g0/scr/pima/npcsc_uvs/J1021+7655_S_uvs.log on Sun Oct 6 14:28:08 2013 obs /g0/scr/pima/npcsc_uvs/J1021+7655_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J1021+7655_S_uva.fits ! AN table 1: 46 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.694444 visibilities/baseline/integration-bin. ! Found source: J1021+7655 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 4600 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J1021+7655_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.008137Jy sigma=0.819973 ! Fit after self-cal, rms=0.948962Jy sigma=0.730727 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.23 mas, bmaj=11.57 mas, bpa=9.808 degrees ! Estimated noise=25.2044 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0603141 Jy ! Component: 100 - total flux cleaned = 0.07365 Jy ! Total flux subtracted in 100 components = 0.07365 Jy ! Clean residual min=-0.010830 max=0.010115 Jy/beam ! Clean residual mean=-0.000005 rms=0.002495 Jy/beam ! Combined flux in latest and established models = 0.07365 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.07365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082041Jy sigma=0.070724 ! Fit after self-cal, rms=0.080370Jy sigma=0.069403 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.362 mas, bmaj=11.9 mas, bpa=10.41 degrees ! Estimated noise=14.5419 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00766702 Jy ! Component: 100 - total flux cleaned = 0.0118715 Jy ! Component: 150 - total flux cleaned = 0.0143779 Jy ! Component: 200 - total flux cleaned = 0.015904 Jy ! Total flux subtracted in 200 components = 0.015904 Jy ! Clean residual min=-0.008731 max=0.009023 Jy/beam ! Clean residual mean=-0.000020 rms=0.002410 Jy/beam ! Combined flux in latest and established models = 0.089554 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 36 components and 0.0895539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081972Jy sigma=0.067160 ! Fit after self-cal, rms=0.081757Jy sigma=0.066969 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.87 KP 0.86 LA 0.85 ! MK 0.82 NL 0.94 OV 1.03 PT 1.03 ! SC 0.74 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.91 KP 0.78 LA 0.78 ! MK 0.77 NL 0.88 OV 0.89 PT 1.00 ! SC 0.71 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.87 KP 0.77 LA 0.70 ! MK 0.90 NL 1.01 OV 0.97 PT 1.00 ! SC 0.69 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.89 KP 0.74 LA 0.57 ! MK 0.93 NL 1.01 OV 0.80 PT 0.94 ! SC 0.75 ! ! ! Fit before self-cal, rms=0.081757Jy sigma=0.066969 ! Fit after self-cal, rms=0.071305Jy sigma=0.062937 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.366 mas, bmaj=12.07 mas, bpa=9.918 degrees ! Estimated noise=11.4214 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0131832 Jy ! Component: 100 - total flux cleaned = -0.0164263 Jy ! Component: 150 - total flux cleaned = -0.0180739 Jy ! Component: 200 - total flux cleaned = -0.0191423 Jy ! Total flux subtracted in 200 components = -0.0191423 Jy ! Clean residual min=-0.004521 max=0.005767 Jy/beam ! Clean residual mean=-0.000012 rms=0.001551 Jy/beam ! Combined flux in latest and established models = 0.0704116 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 52 components and 0.0704116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064598Jy sigma=0.065191 ! Fit after self-cal, rms=0.064785Jy sigma=0.065081 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064785Jy sigma=0.065081 ! Fit after self-cal, rms=0.057274Jy sigma=0.062722 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.356 mas, bmaj=12.12 mas, bpa=9.83 degrees ! Estimated noise=9.12472 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0104877 Jy ! Component: 100 - total flux cleaned = -0.0129098 Jy ! Component: 150 - total flux cleaned = -0.014078 Jy ! Component: 200 - total flux cleaned = -0.0148331 Jy ! Total flux subtracted in 200 components = -0.0148331 Jy ! Clean residual min=-0.003631 max=0.004593 Jy/beam ! Clean residual mean=-0.000009 rms=0.001225 Jy/beam ! Combined flux in latest and established models = 0.0555785 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 73 components and 0.0555785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051951Jy sigma=0.065018 ! Fit after self-cal, rms=0.051981Jy sigma=0.065009 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000304 Jy ! Component: 100 - total flux cleaned = -0.000529854 Jy ! Component: 150 - total flux cleaned = -0.000701321 Jy ! Component: 200 - total flux cleaned = -0.000845987 Jy ! Total flux subtracted in 200 components = -0.000845987 Jy ! Clean residual min=-0.003757 max=0.004627 Jy/beam ! Clean residual mean=-0.000009 rms=0.001226 Jy/beam ! Combined flux in latest and established models = 0.0547326 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 84 components and 0.0547326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051902Jy sigma=0.065084 ! Fit after self-cal, rms=0.051904Jy sigma=0.065078 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051904Jy sigma=0.065078 ! Fit after self-cal, rms=0.045526Jy sigma=0.062640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.341 mas, bmaj=12.16 mas, bpa=9.779 degrees ! Estimated noise=7.23872 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00831594 Jy ! Component: 100 - total flux cleaned = -0.0102517 Jy ! Component: 150 - total flux cleaned = -0.0110999 Jy ! Component: 200 - total flux cleaned = -0.0115917 Jy ! Total flux subtracted in 200 components = -0.0115917 Jy ! Clean residual min=-0.002958 max=0.003587 Jy/beam ! Clean residual mean=-0.000007 rms=0.000962 Jy/beam ! Combined flux in latest and established models = 0.0431409 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 97 components and 0.0431409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.041284Jy sigma=0.064979 ! Fit after self-cal, rms=0.041293Jy sigma=0.064964 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000208474 Jy ! Component: 100 - total flux cleaned = -0.000348101 Jy ! Component: 150 - total flux cleaned = -0.000452537 Jy ! Component: 200 - total flux cleaned = -0.000541211 Jy ! Total flux subtracted in 200 components = -0.000541211 Jy ! Clean residual min=-0.003015 max=0.003636 Jy/beam ! Clean residual mean=-0.000007 rms=0.000964 Jy/beam ! Combined flux in latest and established models = 0.0425996 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 103 components and 0.0425996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.041249Jy sigma=0.065025 ! Fit after self-cal, rms=0.041248Jy sigma=0.065020 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.041248Jy sigma=0.065020 ! Fit after self-cal, rms=0.036127Jy sigma=0.062565 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.337 mas, bmaj=12.67 mas, bpa=15.16 degrees ! Estimated noise=6.34593 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00673816 Jy ! Component: 100 - total flux cleaned = -0.00823523 Jy ! Component: 150 - total flux cleaned = -0.00878341 Jy ! Component: 200 - total flux cleaned = -0.00905652 Jy ! Total flux subtracted in 200 components = -0.00905652 Jy ! Clean residual min=-0.003177 max=0.003598 Jy/beam ! Clean residual mean=-0.000008 rms=0.001090 Jy/beam ! Combined flux in latest and established models = 0.0335431 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 122 components and 0.0335431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.032733Jy sigma=0.065002 ! Fit after self-cal, rms=0.032725Jy sigma=0.064986 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000104221 Jy ! Component: 100 - total flux cleaned = -0.000117584 Jy ! Component: 150 - total flux cleaned = -0.000130099 Jy ! Component: 200 - total flux cleaned = -0.000141801 Jy ! Total flux subtracted in 200 components = -0.000141801 Jy ! Clean residual min=-0.003206 max=0.003603 Jy/beam ! Clean residual mean=-0.000008 rms=0.001089 Jy/beam ! Combined flux in latest and established models = 0.0334013 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 136 components and 0.0334013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.032712Jy sigma=0.065016 ! Fit after self-cal, rms=0.032710Jy sigma=0.065014 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.326 mas, bmaj=12.2 mas, bpa=9.758 degrees ! Estimated noise=5.73528 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.326 x 12.2 at 9.758 degrees (North through East) ! Clean map min=-0.0023934 max=0.031647 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.186 mas, bmaj=11.77 mas, bpa=9.399 degrees ! Estimated noise=10.1335 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0240412 Jy ! Component: 100 - total flux cleaned = 0.0282426 Jy ! Component: 150 - total flux cleaned = 0.0303721 Jy ! Component: 200 - total flux cleaned = 0.0320487 Jy ! Total flux subtracted in 200 components = 0.0320487 Jy ! Clean residual min=-0.003400 max=0.003674 Jy/beam ! Clean residual mean=-0.000001 rms=0.000912 Jy/beam ! Combined flux in latest and established models = 0.0320487 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0320487 Jy ! Inverting map and beam ! Estimated beam: bmin=4.326 mas, bmaj=12.2 mas, bpa=9.758 degrees ! Estimated noise=5.73528 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110984 Jy ! Component: 100 - total flux cleaned = 0.00125647 Jy ! Component: 150 - total flux cleaned = 0.00128254 Jy ! Component: 200 - total flux cleaned = 0.00126226 Jy ! Total flux subtracted in 200 components = 0.00126226 Jy ! Clean residual min=-0.002604 max=0.003005 Jy/beam ! Clean residual mean=-0.000006 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.0333109 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 48 components and 0.0333109 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.337 mas, bmaj=12.67 mas, bpa=15.16 degrees ! Estimated noise=6.34593 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000299631 Jy ! Component: 100 - total flux cleaned = 0.000285931 Jy ! Component: 150 - total flux cleaned = 0.000274698 Jy ! Component: 200 - total flux cleaned = 0.000274822 Jy ! Total flux subtracted in 200 components = 0.000274822 Jy ! Clean residual min=-0.003274 max=0.003814 Jy/beam ! Clean residual mean=-0.000008 rms=0.001105 Jy/beam ! Combined flux in latest and established models = 0.0335857 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.01562e-05 Jy ! Component: 100 - total flux cleaned = -1.87931e-05 Jy ! Component: 150 - total flux cleaned = -1.88116e-05 Jy ! Component: 200 - total flux cleaned = -2.71345e-05 Jy ! Total flux subtracted in 200 components = -2.71345e-05 Jy ! Clean residual min=-0.003248 max=0.003781 Jy/beam ! Clean residual mean=-0.000008 rms=0.001101 Jy/beam ! Combined flux in latest and established models = 0.0335586 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 62 components and 0.0335586 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.326 mas, bmaj=12.2 mas, bpa=9.758 degrees ! Estimated noise=5.73528 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000201995 Jy ! Component: 100 - total flux cleaned = -0.000245987 Jy ! Component: 150 - total flux cleaned = -0.000284799 Jy ! Component: 200 - total flux cleaned = -0.00031978 Jy ! Total flux subtracted in 200 components = -0.00031978 Jy ! Clean residual min=-0.002495 max=0.002964 Jy/beam ! Clean residual mean=-0.000006 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.0332388 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 72 components and 0.0332388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.032688Jy sigma=0.065181 ! Fit after self-cal, rms=0.032688Jy sigma=0.065160 wmodel /g0/scr/pima/npcsc_uvs/J1021+7655_S_map.mod ! Writing 72 model components to file: /g0/scr/pima/npcsc_uvs/J1021+7655_S_map.mod wobs /g0/scr/pima/npcsc_uvs/J1021+7655_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J1021+7655_S_uvs.fits wwins /g0/scr/pima/npcsc_uvs/J1021+7655_S_map.win ! wwins: Wrote 1 windows to /g0/scr/pima/npcsc_uvs/J1021+7655_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129893 Jy ! Component: 100 - total flux cleaned = 0.00203493 Jy ! Component: 150 - total flux cleaned = 0.00256653 Jy ! Component: 200 - total flux cleaned = 0.0029142 Jy ! Component: 250 - total flux cleaned = 0.00323514 Jy ! Component: 300 - total flux cleaned = 0.00350367 Jy ! Component: 350 - total flux cleaned = 0.003781 Jy ! Component: 400 - total flux cleaned = 0.00396249 Jy ! Component: 450 - total flux cleaned = 0.00408567 Jy ! Component: 500 - total flux cleaned = 0.00422517 Jy ! Component: 550 - total flux cleaned = 0.00431295 Jy ! Component: 600 - total flux cleaned = 0.00441761 Jy ! Component: 650 - total flux cleaned = 0.00451783 Jy ! Component: 700 - total flux cleaned = 0.00463434 Jy ! Component: 750 - total flux cleaned = 0.00476537 Jy ! Component: 800 - total flux cleaned = 0.00490892 Jy ! Component: 850 - total flux cleaned = 0.00499624 Jy ! Component: 900 - total flux cleaned = 0.00506343 Jy ! Component: 950 - total flux cleaned = 0.00512832 Jy ! Component: 1000 - total flux cleaned = 0.00514365 Jy ! Component: 1050 - total flux cleaned = 0.00520454 Jy ! Component: 1100 - total flux cleaned = 0.0052937 Jy ! Component: 1150 - total flux cleaned = 0.00536584 Jy ! Component: 1200 - total flux cleaned = 0.00539358 Jy ! Component: 1250 - total flux cleaned = 0.00539345 Jy ! Component: 1300 - total flux cleaned = 0.00542044 Jy ! Component: 1350 - total flux cleaned = 0.00544681 Jy ! Component: 1400 - total flux cleaned = 0.00554922 Jy ! Component: 1450 - total flux cleaned = 0.00553671 Jy ! Component: 1500 - total flux cleaned = 0.00557371 Jy ! Component: 1550 - total flux cleaned = 0.00559753 Jy ! Component: 1600 - total flux cleaned = 0.00560955 Jy ! Component: 1650 - total flux cleaned = 0.00567834 Jy ! Component: 1700 - total flux cleaned = 0.0056668 Jy ! Component: 1750 - total flux cleaned = 0.00567798 Jy ! Component: 1800 - total flux cleaned = 0.00573202 Jy ! Component: 1850 - total flux cleaned = 0.00577447 Jy ! Component: 1900 - total flux cleaned = 0.00579539 Jy ! Component: 1950 - total flux cleaned = 0.00587721 Jy ! Component: 2000 - total flux cleaned = 0.00592746 Jy ! Component: 2050 - total flux cleaned = 0.00594724 Jy ! Component: 2100 - total flux cleaned = 0.00600554 Jy ! Component: 2150 - total flux cleaned = 0.00601512 Jy ! Component: 2200 - total flux cleaned = 0.00604337 Jy ! Component: 2250 - total flux cleaned = 0.00606195 Jy ! Component: 2300 - total flux cleaned = 0.00605275 Jy ! Component: 2350 - total flux cleaned = 0.00606202 Jy ! Component: 2400 - total flux cleaned = 0.00605325 Jy ! Component: 2450 - total flux cleaned = 0.00607086 Jy ! Component: 2500 - total flux cleaned = 0.0060707 Jy ! Component: 2550 - total flux cleaned = 0.0060448 Jy ! Component: 2600 - total flux cleaned = 0.00601936 Jy ! Component: 2650 - total flux cleaned = 0.0059943 Jy ! Component: 2700 - total flux cleaned = 0.00597791 Jy ! Component: 2750 - total flux cleaned = 0.00593714 Jy ! Component: 2800 - total flux cleaned = 0.00592903 Jy ! Component: 2850 - total flux cleaned = 0.00592097 Jy ! Component: 2900 - total flux cleaned = 0.00588933 Jy ! Component: 2950 - total flux cleaned = 0.00587366 Jy ! Component: 3000 - total flux cleaned = 0.00586594 Jy ! Component: 3050 - total flux cleaned = 0.00584293 Jy ! Component: 3100 - total flux cleaned = 0.00586568 Jy ! Component: 3150 - total flux cleaned = 0.00584304 Jy ! Component: 3200 - total flux cleaned = 0.00582802 Jy ! Component: 3250 - total flux cleaned = 0.00581316 Jy ! Component: 3300 - total flux cleaned = 0.00581311 Jy ! Component: 3350 - total flux cleaned = 0.00577665 Jy ! Component: 3400 - total flux cleaned = 0.00576954 Jy ! Component: 3450 - total flux cleaned = 0.00574088 Jy ! Component: 3500 - total flux cleaned = 0.00572659 Jy ! Component: 3550 - total flux cleaned = 0.00569832 Jy ! Component: 3600 - total flux cleaned = 0.00567023 Jy ! Component: 3650 - total flux cleaned = 0.00563536 Jy ! Component: 3700 - total flux cleaned = 0.00560763 Jy ! Component: 3750 - total flux cleaned = 0.00556616 Jy ! Component: 3800 - total flux cleaned = 0.00553865 Jy ! Component: 3850 - total flux cleaned = 0.00551129 Jy ! Component: 3900 - total flux cleaned = 0.00546369 Jy ! Component: 3950 - total flux cleaned = 0.00539606 Jy ! Component: 4000 - total flux cleaned = 0.00534893 Jy ! Component: 4050 - total flux cleaned = 0.00530203 Jy ! Total flux subtracted in 4096 components = 0.0052687 Jy ! Clean residual min=-0.000444 max=0.000381 Jy/beam ! Clean residual mean=-0.000002 rms=0.000123 Jy/beam ! Combined flux in latest and established models = 0.0385075 Jy keep ! Adding 385 model components to the UV plane model. ! The established model now contains 457 components and 0.0385075 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsc_uvs/J1021+7655_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.326 x 12.2 at 9.758 degrees (North through East) ! Clean map min=-0.0021379 max=0.031358 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J1021+7655_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0313581 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000119102 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.13944 1.13944 2.27888 4.55776 9.11551 18.231 36.4621 72.9241 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.031 quit ! Quitting program ! Log file /g0/scr/pima/npcsc_uvs/J1021+7655_S_uvs.log closed on Sun Oct 6 14:28:12 2013