! Started logfile: /g0/scr/pima/npcsc_uvs/J1016+7617_X_uvs.log on Sun Oct 6 14:24:10 2013 obs /g0/scr/pima/npcsc_uvs/J1016+7617_X_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J1016+7617_X_uva.fits ! AN table 1: 45 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.571429 visibilities/baseline/integration-bin. ! Found source: J1016+7617 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 2880 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J1016+7617_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.004269Jy sigma=0.773737 ! Fit after self-cal, rms=0.952000Jy sigma=0.701743 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.473 mas, bmaj=3.564 mas, bpa=53.39 degrees ! Estimated noise=41.5327 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0572054 Jy ! Component: 100 - total flux cleaned = 0.0699236 Jy ! Total flux subtracted in 100 components = 0.0699236 Jy ! Clean residual min=-0.009208 max=0.010231 Jy/beam ! Clean residual mean=0.000019 rms=0.002755 Jy/beam ! Combined flux in latest and established models = 0.0699235 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0699235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071756Jy sigma=0.057237 ! Fit after self-cal, rms=0.069570Jy sigma=0.055785 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.869 mas, bmaj=3.883 mas, bpa=48.99 degrees ! Estimated noise=19.8166 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245639 Jy ! Component: 100 - total flux cleaned = 0.00253511 Jy ! Component: 150 - total flux cleaned = 0.00288024 Jy ! Component: 200 - total flux cleaned = 0.00314142 Jy ! Total flux subtracted in 200 components = 0.00314142 Jy ! Clean residual min=-0.003880 max=0.004924 Jy/beam ! Clean residual mean=0.000018 rms=0.001348 Jy/beam ! Combined flux in latest and established models = 0.073065 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 14 components and 0.073065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070815Jy sigma=0.054406 ! Fit after self-cal, rms=0.070799Jy sigma=0.054386 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.95 HN 1.00* KP 0.99 ! LA 0.88 NL 0.96 OV 0.78 PT 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.89 HN 1.00* KP 0.83 ! LA 0.94 NL 0.86 OV 0.91 PT 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.82 HN 1.00* KP 0.77 ! LA 0.77 NL 0.95 OV 0.94 PT 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 0.85 HN 1.00* KP 0.81 ! LA 0.84 NL 1.05 OV 0.95 PT 0.95 ! ! ! Fit before self-cal, rms=0.070799Jy sigma=0.054386 ! Fit after self-cal, rms=0.062098Jy sigma=0.051426 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.832 mas, bmaj=3.903 mas, bpa=50.46 degrees ! Estimated noise=15.582 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0118592 Jy ! Component: 100 - total flux cleaned = -0.0144625 Jy ! Component: 150 - total flux cleaned = -0.0143681 Jy ! Component: 200 - total flux cleaned = -0.0142939 Jy ! Total flux subtracted in 200 components = -0.0142939 Jy ! Clean residual min=-0.002595 max=0.003048 Jy/beam ! Clean residual mean=0.000006 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 0.0587711 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 30 components and 0.0587711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055718Jy sigma=0.053450 ! Fit after self-cal, rms=0.055789Jy sigma=0.053384 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055789Jy sigma=0.053384 ! Fit after self-cal, rms=0.049813Jy sigma=0.051317 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.834 mas, bmaj=3.913 mas, bpa=50.15 degrees ! Estimated noise=12.4711 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00946596 Jy ! Component: 100 - total flux cleaned = -0.0115412 Jy ! Component: 150 - total flux cleaned = -0.0117082 Jy ! Component: 200 - total flux cleaned = -0.0117249 Jy ! Total flux subtracted in 200 components = -0.0117249 Jy ! Clean residual min=-0.002191 max=0.002279 Jy/beam ! Clean residual mean=0.000005 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.0470462 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 37 components and 0.0470462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.044726Jy sigma=0.053350 ! Fit after self-cal, rms=0.044723Jy sigma=0.053347 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.60987e-05 Jy ! Component: 100 - total flux cleaned = 9.82561e-06 Jy ! Component: 150 - total flux cleaned = -4.60255e-06 Jy ! Component: 200 - total flux cleaned = -1.72462e-05 Jy ! Total flux subtracted in 200 components = -1.72462e-05 Jy ! Clean residual min=-0.002170 max=0.002220 Jy/beam ! Clean residual mean=0.000005 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.047029 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.047029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.044686Jy sigma=0.053370 ! Fit after self-cal, rms=0.044678Jy sigma=0.053367 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.044678Jy sigma=0.053367 ! Fit after self-cal, rms=0.039878Jy sigma=0.051277 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.836 mas, bmaj=3.932 mas, bpa=49.82 degrees ! Estimated noise=10.0417 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00729979 Jy ! Component: 100 - total flux cleaned = -0.00890053 Jy ! Component: 150 - total flux cleaned = -0.00926297 Jy ! Component: 200 - total flux cleaned = -0.00930138 Jy ! Total flux subtracted in 200 components = -0.00930138 Jy ! Clean residual min=-0.001716 max=0.001792 Jy/beam ! Clean residual mean=0.000003 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.0377276 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 43 components and 0.0377276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.035990Jy sigma=0.053312 ! Fit after self-cal, rms=0.035981Jy sigma=0.053307 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.01237e-05 Jy ! Component: 100 - total flux cleaned = 4.79657e-05 Jy ! Component: 150 - total flux cleaned = 1.20866e-06 Jy ! Component: 200 - total flux cleaned = 1.54055e-06 Jy ! Total flux subtracted in 200 components = 1.54055e-06 Jy ! Clean residual min=-0.001724 max=0.001750 Jy/beam ! Clean residual mean=0.000004 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.0377291 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 46 components and 0.0377291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.035949Jy sigma=0.053336 ! Fit after self-cal, rms=0.035949Jy sigma=0.053335 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.035949Jy sigma=0.053335 ! Fit after self-cal, rms=0.032069Jy sigma=0.051233 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.207 mas, bmaj=4.252 mas, bpa=42.12 degrees ! Estimated noise=8.19026 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00584677 Jy ! Component: 100 - total flux cleaned = -0.00712916 Jy ! Component: 150 - total flux cleaned = -0.00740198 Jy ! Component: 200 - total flux cleaned = -0.00746963 Jy ! Total flux subtracted in 200 components = -0.00746963 Jy ! Clean residual min=-0.001385 max=0.001487 Jy/beam ! Clean residual mean=0.000003 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.0302595 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 56 components and 0.0302595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.028948Jy sigma=0.053258 ! Fit after self-cal, rms=0.028944Jy sigma=0.053245 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.40584e-05 Jy ! Component: 100 - total flux cleaned = -3.88562e-05 Jy ! Component: 150 - total flux cleaned = -5.07283e-05 Jy ! Component: 200 - total flux cleaned = -5.61198e-05 Jy ! Total flux subtracted in 200 components = -5.61198e-05 Jy ! Clean residual min=-0.001439 max=0.001481 Jy/beam ! Clean residual mean=0.000003 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.0302034 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 64 components and 0.0302034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.028913Jy sigma=0.053282 ! Fit after self-cal, rms=0.028912Jy sigma=0.053277 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.837 mas, bmaj=3.957 mas, bpa=49.46 degrees ! Estimated noise=8.07752 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.837 x 3.957 at 49.46 degrees (North through East) ! Clean map min=-0.0014372 max=0.030603 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.441 mas, bmaj=3.657 mas, bpa=53.45 degrees ! Estimated noise=16.9933 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0240882 Jy ! Component: 100 - total flux cleaned = 0.028288 Jy ! Component: 150 - total flux cleaned = 0.0290669 Jy ! Component: 200 - total flux cleaned = 0.0294501 Jy ! Total flux subtracted in 200 components = 0.0294501 Jy ! Clean residual min=-0.003297 max=0.003833 Jy/beam ! Clean residual mean=0.000004 rms=0.001034 Jy/beam ! Combined flux in latest and established models = 0.0294501 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0294501 Jy ! Inverting map and beam ! Estimated beam: bmin=2.837 mas, bmaj=3.957 mas, bpa=49.46 degrees ! Estimated noise=8.07752 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-20, -8.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170001 Jy ! Component: 100 - total flux cleaned = 0.00191558 Jy ! Component: 150 - total flux cleaned = 0.00220258 Jy ! Component: 200 - total flux cleaned = 0.00230498 Jy ! Total flux subtracted in 200 components = 0.00230498 Jy ! Clean residual min=-0.001128 max=0.001165 Jy/beam ! Clean residual mean=0.000000 rms=0.000315 Jy/beam ! Combined flux in latest and established models = 0.0317551 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 47 components and 0.0317551 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.207 mas, bmaj=4.252 mas, bpa=42.12 degrees ! Estimated noise=8.19026 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.73917e-05 Jy ! Component: 100 - total flux cleaned = -4.10315e-05 Jy ! Component: 150 - total flux cleaned = -5.64127e-05 Jy ! Component: 200 - total flux cleaned = -5.63346e-05 Jy ! Total flux subtracted in 200 components = -5.63346e-05 Jy ! Clean residual min=-0.001017 max=0.000976 Jy/beam ! Clean residual mean=-0.000000 rms=0.000280 Jy/beam ! Combined flux in latest and established models = 0.0316987 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.27845e-05 Jy ! Component: 100 - total flux cleaned = -2.42756e-05 Jy ! Component: 150 - total flux cleaned = -2.39544e-05 Jy ! Component: 200 - total flux cleaned = -2.38517e-05 Jy ! Total flux subtracted in 200 components = -2.38517e-05 Jy ! Clean residual min=-0.000970 max=0.000952 Jy/beam ! Clean residual mean=-0.000000 rms=0.000258 Jy/beam ! Combined flux in latest and established models = 0.0316749 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 91 components and 0.0316749 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.837 mas, bmaj=3.957 mas, bpa=49.46 degrees ! Estimated noise=8.07752 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.38572e-05 Jy ! Component: 100 - total flux cleaned = 6.36747e-05 Jy ! Component: 150 - total flux cleaned = 6.36839e-05 Jy ! Component: 200 - total flux cleaned = 4.97806e-05 Jy ! Total flux subtracted in 200 components = 4.97806e-05 Jy ! Clean residual min=-0.000923 max=0.000963 Jy/beam ! Clean residual mean=-0.000000 rms=0.000244 Jy/beam ! Combined flux in latest and established models = 0.0317247 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 123 components and 0.0317246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.028817Jy sigma=0.053138 ! Fit after self-cal, rms=0.028816Jy sigma=0.053085 wmodel /g0/scr/pima/npcsc_uvs/J1016+7617_X_map.mod ! Writing 123 model components to file: /g0/scr/pima/npcsc_uvs/J1016+7617_X_map.mod wobs /g0/scr/pima/npcsc_uvs/J1016+7617_X_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J1016+7617_X_uvs.fits wwins /g0/scr/pima/npcsc_uvs/J1016+7617_X_map.win ! wwins: Wrote 2 windows to /g0/scr/pima/npcsc_uvs/J1016+7617_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000198823 Jy ! Component: 100 - total flux cleaned = -0.000264176 Jy ! Component: 150 - total flux cleaned = -0.000292143 Jy ! Component: 200 - total flux cleaned = -0.000304203 Jy ! Component: 250 - total flux cleaned = -0.000255818 Jy ! Component: 300 - total flux cleaned = -0.000244075 Jy ! Component: 350 - total flux cleaned = -0.000244519 Jy ! Component: 400 - total flux cleaned = -0.00027491 Jy ! Component: 450 - total flux cleaned = -0.000294429 Jy ! Component: 500 - total flux cleaned = -0.000332692 Jy ! Component: 550 - total flux cleaned = -0.000360612 Jy ! Component: 600 - total flux cleaned = -0.000405557 Jy ! Component: 650 - total flux cleaned = -0.000414325 Jy ! Component: 700 - total flux cleaned = -0.000457259 Jy ! Component: 750 - total flux cleaned = -0.000457202 Jy ! Component: 800 - total flux cleaned = -0.000490011 Jy ! Component: 850 - total flux cleaned = -0.000489905 Jy ! Component: 900 - total flux cleaned = -0.000521541 Jy ! Component: 950 - total flux cleaned = -0.000537027 Jy ! Component: 1000 - total flux cleaned = -0.000574979 Jy ! Component: 1050 - total flux cleaned = -0.000597359 Jy ! Component: 1100 - total flux cleaned = -0.000604674 Jy ! Component: 1150 - total flux cleaned = -0.000626496 Jy ! Component: 1200 - total flux cleaned = -0.00064082 Jy ! Component: 1250 - total flux cleaned = -0.000654958 Jy ! Component: 1300 - total flux cleaned = -0.000675794 Jy ! Component: 1350 - total flux cleaned = -0.000675669 Jy ! Component: 1400 - total flux cleaned = -0.000682512 Jy ! Component: 1450 - total flux cleaned = -0.000689299 Jy ! Component: 1500 - total flux cleaned = -0.00070262 Jy ! Component: 1550 - total flux cleaned = -0.000722334 Jy ! Component: 1600 - total flux cleaned = -0.000728868 Jy ! Component: 1650 - total flux cleaned = -0.000748191 Jy ! Component: 1700 - total flux cleaned = -0.000767316 Jy ! Component: 1750 - total flux cleaned = -0.000792616 Jy ! Component: 1800 - total flux cleaned = -0.000817678 Jy ! Component: 1850 - total flux cleaned = -0.000867547 Jy ! Component: 1900 - total flux cleaned = -0.000910843 Jy ! Component: 1950 - total flux cleaned = -0.000947781 Jy ! Component: 2000 - total flux cleaned = -0.000990649 Jy ! Component: 2050 - total flux cleaned = -0.0010272 Jy ! Component: 2100 - total flux cleaned = -0.00105148 Jy ! Component: 2150 - total flux cleaned = -0.00109992 Jy ! Component: 2200 - total flux cleaned = -0.001112 Jy ! Component: 2250 - total flux cleaned = -0.00114813 Jy ! Component: 2300 - total flux cleaned = -0.00119621 Jy ! Component: 2350 - total flux cleaned = -0.00123219 Jy ! Component: 2400 - total flux cleaned = -0.00127409 Jy ! Component: 2450 - total flux cleaned = -0.00131598 Jy ! Component: 2500 - total flux cleaned = -0.00135782 Jy ! Component: 2550 - total flux cleaned = -0.0014056 Jy ! Component: 2600 - total flux cleaned = -0.00144738 Jy ! Component: 2650 - total flux cleaned = -0.00149503 Jy ! Component: 2700 - total flux cleaned = -0.00154863 Jy ! Component: 2750 - total flux cleaned = -0.00159622 Jy ! Component: 2800 - total flux cleaned = -0.00163789 Jy ! Component: 2850 - total flux cleaned = -0.00167954 Jy ! Component: 2900 - total flux cleaned = -0.00172716 Jy ! Component: 2950 - total flux cleaned = -0.00176281 Jy ! Component: 3000 - total flux cleaned = -0.00182231 Jy ! Component: 3050 - total flux cleaned = -0.00186993 Jy ! Component: 3100 - total flux cleaned = -0.00191161 Jy ! Component: 3150 - total flux cleaned = -0.00194732 Jy ! Component: 3200 - total flux cleaned = -0.001989 Jy ! Component: 3250 - total flux cleaned = -0.00202477 Jy ! Component: 3300 - total flux cleaned = -0.00207247 Jy ! Component: 3350 - total flux cleaned = -0.00210838 Jy ! Component: 3400 - total flux cleaned = -0.00215027 Jy ! Component: 3450 - total flux cleaned = -0.00221034 Jy ! Component: 3500 - total flux cleaned = -0.0022525 Jy ! Component: 3550 - total flux cleaned = -0.00231287 Jy ! Component: 3600 - total flux cleaned = -0.00234321 Jy ! Component: 3650 - total flux cleaned = -0.00240997 Jy ! Component: 3700 - total flux cleaned = -0.00245869 Jy ! Component: 3750 - total flux cleaned = -0.00250755 Jy ! Component: 3800 - total flux cleaned = -0.00256273 Jy ! Component: 3850 - total flux cleaned = -0.00261193 Jy ! Component: 3900 - total flux cleaned = -0.0026613 Jy ! Component: 3950 - total flux cleaned = -0.00272326 Jy ! Component: 4000 - total flux cleaned = -0.00279164 Jy ! Component: 4050 - total flux cleaned = -0.00283535 Jy ! Total flux subtracted in 4096 components = -0.00288549 Jy ! Clean residual min=-0.000397 max=0.000345 Jy/beam ! Clean residual mean=-0.000002 rms=0.000108 Jy/beam ! Combined flux in latest and established models = 0.0288392 Jy keep ! Adding 223 model components to the UV plane model. ! The established model now contains 346 components and 0.0288392 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsc_uvs/J1016+7617_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.837 x 3.957 at 49.46 degrees (North through East) ! Clean map min=-0.0011155 max=0.030697 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J1016+7617_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0306969 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000106126 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.03717 1.03717 2.07434 4.14868 8.29737 16.5947 33.1895 66.379 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.03 quit ! Quitting program ! Log file /g0/scr/pima/npcsc_uvs/J1016+7617_X_uvs.log closed on Sun Oct 6 14:24:14 2013