! Started logfile: /g0/scr/pima/npcsc_uvs/J0911+8607_X_uvs.log on Sun Oct 6 14:24:00 2013 obs /g0/scr/pima/npcsc_uvs/J0911+8607_X_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J0911+8607_X_uva.fits ! AN table 1: 47 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.914421 visibilities/baseline/integration-bin. ! Found source: J0911+8607 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 7736 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J0911+8607_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.004376Jy sigma=0.800128 ! Fit after self-cal, rms=0.954049Jy sigma=0.723295 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6379 mas, bmaj=2.695 mas, bpa=22.29 degrees ! Estimated noise=20.6716 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0563926 Jy ! Component: 100 - total flux cleaned = 0.0654856 Jy ! Total flux subtracted in 100 components = 0.0654856 Jy ! Clean residual min=-0.006471 max=0.006569 Jy/beam ! Clean residual mean=-0.000002 rms=0.001498 Jy/beam ! Combined flux in latest and established models = 0.0654856 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0654856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085169Jy sigma=0.075966 ! Fit after self-cal, rms=0.083153Jy sigma=0.074449 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8466 mas, bmaj=2.9 mas, bpa=21.5 degrees ! Estimated noise=11.4061 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00676134 Jy ! Component: 100 - total flux cleaned = 0.00904336 Jy ! Component: 150 - total flux cleaned = 0.0104994 Jy ! Component: 200 - total flux cleaned = 0.0111892 Jy ! Total flux subtracted in 200 components = 0.0111892 Jy ! Clean residual min=-0.003583 max=0.003536 Jy/beam ! Clean residual mean=-0.000015 rms=0.000901 Jy/beam ! Combined flux in latest and established models = 0.0766748 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 15 components and 0.0766748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084924Jy sigma=0.072608 ! Fit after self-cal, rms=0.084921Jy sigma=0.072585 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.87 HN 1.00 KP 0.88 ! LA 0.94 MK 0.91 NL 1.00 OV 0.85 ! PT 0.92 SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.95 HN 0.85 KP 0.85 ! LA 0.83 MK 0.92 NL 0.93 OV 0.94 ! PT 0.93 SC 0.89 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.85 HN 0.84 KP 0.67 ! LA 0.91 MK 0.85 NL 1.00 OV 0.87 ! PT 0.94 SC 0.93 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.80 FD 0.89 HN 0.85 KP 0.77 ! LA 0.85 MK 0.83 NL 0.97 OV 0.87 ! PT 0.87 SC 0.81 ! ! ! Fit before self-cal, rms=0.084921Jy sigma=0.072585 ! Fit after self-cal, rms=0.071938Jy sigma=0.069950 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8432 mas, bmaj=2.881 mas, bpa=21.47 degrees ! Estimated noise=8.84616 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0128534 Jy ! Component: 100 - total flux cleaned = -0.0156564 Jy ! Component: 150 - total flux cleaned = -0.0159089 Jy ! Component: 200 - total flux cleaned = -0.0159758 Jy ! Total flux subtracted in 200 components = -0.0159758 Jy ! Clean residual min=-0.002625 max=0.002329 Jy/beam ! Clean residual mean=-0.000002 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.060699 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 24 components and 0.060699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065704Jy sigma=0.071897 ! Fit after self-cal, rms=0.065667Jy sigma=0.071713 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065667Jy sigma=0.071713 ! Fit after self-cal, rms=0.056455Jy sigma=0.069694 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8416 mas, bmaj=2.876 mas, bpa=21.43 degrees ! Estimated noise=6.93712 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0100727 Jy ! Component: 100 - total flux cleaned = -0.0122703 Jy ! Component: 150 - total flux cleaned = -0.0127042 Jy ! Component: 200 - total flux cleaned = -0.012723 Jy ! Total flux subtracted in 200 components = -0.012723 Jy ! Clean residual min=-0.001948 max=0.001786 Jy/beam ! Clean residual mean=-0.000003 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.047976 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 31 components and 0.047976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051577Jy sigma=0.071648 ! Fit after self-cal, rms=0.051587Jy sigma=0.071645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.2238e-06 Jy ! Component: 100 - total flux cleaned = -1.99638e-05 Jy ! Component: 150 - total flux cleaned = -3.13696e-05 Jy ! Component: 200 - total flux cleaned = -1.07687e-05 Jy ! Total flux subtracted in 200 components = -1.07687e-05 Jy ! Clean residual min=-0.001948 max=0.001766 Jy/beam ! Clean residual mean=-0.000003 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.0479653 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 39 components and 0.0479653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051537Jy sigma=0.071682 ! Fit after self-cal, rms=0.051507Jy sigma=0.071665 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051507Jy sigma=0.071665 ! Fit after self-cal, rms=0.044289Jy sigma=0.069647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8393 mas, bmaj=2.874 mas, bpa=21.44 degrees ! Estimated noise=5.46409 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00772618 Jy ! Component: 100 - total flux cleaned = -0.00941468 Jy ! Component: 150 - total flux cleaned = -0.00967493 Jy ! Component: 200 - total flux cleaned = -0.00975913 Jy ! Total flux subtracted in 200 components = -0.00975913 Jy ! Clean residual min=-0.001548 max=0.001376 Jy/beam ! Clean residual mean=-0.000003 rms=0.000360 Jy/beam ! Combined flux in latest and established models = 0.0382061 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 42 components and 0.0382061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.040563Jy sigma=0.071614 ! Fit after self-cal, rms=0.040561Jy sigma=0.071610 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.36699e-05 Jy ! Component: 100 - total flux cleaned = -5.31874e-05 Jy ! Component: 150 - total flux cleaned = -5.28801e-05 Jy ! Component: 200 - total flux cleaned = -6.68591e-05 Jy ! Total flux subtracted in 200 components = -6.68591e-05 Jy ! Clean residual min=-0.001550 max=0.001368 Jy/beam ! Clean residual mean=-0.000002 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.0381393 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 46 components and 0.0381393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.040534Jy sigma=0.071638 ! Fit after self-cal, rms=0.040534Jy sigma=0.071637 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.040534Jy sigma=0.071637 ! Fit after self-cal, rms=0.034848Jy sigma=0.069619 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.013 mas, bmaj=3.695 mas, bpa=19.14 degrees ! Estimated noise=5.62421 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00602457 Jy ! Component: 100 - total flux cleaned = -0.00734199 Jy ! Component: 150 - total flux cleaned = -0.00774711 Jy ! Component: 200 - total flux cleaned = -0.00783358 Jy ! Total flux subtracted in 200 components = -0.00783358 Jy ! Clean residual min=-0.001255 max=0.001125 Jy/beam ! Clean residual mean=-0.000005 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.0303057 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 50 components and 0.0303057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.031952Jy sigma=0.071526 ! Fit after self-cal, rms=0.031950Jy sigma=0.071522 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.52488e-05 Jy ! Component: 100 - total flux cleaned = -0.000116303 Jy ! Component: 150 - total flux cleaned = -0.000131204 Jy ! Component: 200 - total flux cleaned = -0.000144635 Jy ! Total flux subtracted in 200 components = -0.000144635 Jy ! Clean residual min=-0.001246 max=0.001125 Jy/beam ! Clean residual mean=-0.000004 rms=0.000322 Jy/beam ! Combined flux in latest and established models = 0.0301611 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 52 components and 0.0301611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.031941Jy sigma=0.071539 ! Fit after self-cal, rms=0.031937Jy sigma=0.071538 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8374 mas, bmaj=2.873 mas, bpa=21.46 degrees ! Estimated noise=4.30263 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8374 x 2.873 at 21.46 degrees (North through East) ! Clean map min=-0.0010946 max=0.028615 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6337 mas, bmaj=2.67 mas, bpa=22.3 degrees ! Estimated noise=7.68135 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0216702 Jy ! Component: 100 - total flux cleaned = 0.0260194 Jy ! Component: 150 - total flux cleaned = 0.0267904 Jy ! Component: 200 - total flux cleaned = 0.0276857 Jy ! Total flux subtracted in 200 components = 0.0276857 Jy ! Clean residual min=-0.002206 max=0.002174 Jy/beam ! Clean residual mean=-0.000000 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.0276857 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0276857 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8374 mas, bmaj=2.873 mas, bpa=21.46 degrees ! Estimated noise=4.30263 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133154 Jy ! Component: 100 - total flux cleaned = 0.00191562 Jy ! Component: 150 - total flux cleaned = 0.00212297 Jy ! Component: 200 - total flux cleaned = 0.00221524 Jy ! Total flux subtracted in 200 components = 0.00221524 Jy ! Clean residual min=-0.001269 max=0.001140 Jy/beam ! Clean residual mean=-0.000002 rms=0.000291 Jy/beam ! Combined flux in latest and established models = 0.029901 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 35 components and 0.0299009 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.013 mas, bmaj=3.695 mas, bpa=19.14 degrees ! Estimated noise=5.62421 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000106914 Jy ! Component: 100 - total flux cleaned = 8.40152e-05 Jy ! Component: 150 - total flux cleaned = 9.15614e-05 Jy ! Component: 200 - total flux cleaned = 9.86683e-05 Jy ! Total flux subtracted in 200 components = 9.86683e-05 Jy ! Clean residual min=-0.001259 max=0.001127 Jy/beam ! Clean residual mean=-0.000004 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 0.0299996 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.06997e-06 Jy ! Component: 100 - total flux cleaned = 6.06248e-06 Jy ! Component: 150 - total flux cleaned = 6.02958e-06 Jy ! Component: 200 - total flux cleaned = 5.97681e-06 Jy ! Total flux subtracted in 200 components = 5.97681e-06 Jy ! Clean residual min=-0.001243 max=0.001122 Jy/beam ! Clean residual mean=-0.000004 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.0300056 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 48 components and 0.0300056 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8374 mas, bmaj=2.873 mas, bpa=21.46 degrees ! Estimated noise=4.30263 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.71402e-05 Jy ! Component: 100 - total flux cleaned = 3.87079e-05 Jy ! Component: 150 - total flux cleaned = 3.88998e-05 Jy ! Component: 200 - total flux cleaned = 3.87659e-05 Jy ! Total flux subtracted in 200 components = 3.87659e-05 Jy ! Clean residual min=-0.001248 max=0.001085 Jy/beam ! Clean residual mean=-0.000002 rms=0.000285 Jy/beam ! Combined flux in latest and established models = 0.0300444 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 57 components and 0.0300443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.031849Jy sigma=0.071719 ! Fit after self-cal, rms=0.031844Jy sigma=0.071714 wmodel /g0/scr/pima/npcsc_uvs/J0911+8607_X_map.mod ! Writing 57 model components to file: /g0/scr/pima/npcsc_uvs/J0911+8607_X_map.mod wobs /g0/scr/pima/npcsc_uvs/J0911+8607_X_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J0911+8607_X_uvs.fits wwins /g0/scr/pima/npcsc_uvs/J0911+8607_X_map.win ! wwins: Wrote 1 windows to /g0/scr/pima/npcsc_uvs/J0911+8607_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000471087 Jy ! Component: 100 - total flux cleaned = -0.00067668 Jy ! Component: 150 - total flux cleaned = -0.000794389 Jy ! Component: 200 - total flux cleaned = -0.000813294 Jy ! Component: 250 - total flux cleaned = -0.000904788 Jy ! Component: 300 - total flux cleaned = -0.00101164 Jy ! Component: 350 - total flux cleaned = -0.00104653 Jy ! Component: 400 - total flux cleaned = -0.00118375 Jy ! Component: 450 - total flux cleaned = -0.00126797 Jy ! Component: 500 - total flux cleaned = -0.00136692 Jy ! Component: 550 - total flux cleaned = -0.00146437 Jy ! Component: 600 - total flux cleaned = -0.00159177 Jy ! Component: 650 - total flux cleaned = -0.00168597 Jy ! Component: 700 - total flux cleaned = -0.00173238 Jy ! Component: 750 - total flux cleaned = -0.00180843 Jy ! Component: 800 - total flux cleaned = -0.00180831 Jy ! Component: 850 - total flux cleaned = -0.00185296 Jy ! Component: 900 - total flux cleaned = -0.00191159 Jy ! Component: 950 - total flux cleaned = -0.00195482 Jy ! Component: 1000 - total flux cleaned = -0.00201188 Jy ! Component: 1050 - total flux cleaned = -0.00202606 Jy ! Component: 1100 - total flux cleaned = -0.00205414 Jy ! Component: 1150 - total flux cleaned = -0.00210929 Jy ! Component: 1200 - total flux cleaned = -0.00213653 Jy ! Component: 1250 - total flux cleaned = -0.00217677 Jy ! Component: 1300 - total flux cleaned = -0.00217674 Jy ! Component: 1350 - total flux cleaned = -0.00222942 Jy ! Component: 1400 - total flux cleaned = -0.00217736 Jy ! Component: 1450 - total flux cleaned = -0.00216433 Jy ! Component: 1500 - total flux cleaned = -0.00216432 Jy ! Component: 1550 - total flux cleaned = -0.00210142 Jy ! Component: 1600 - total flux cleaned = -0.00212653 Jy ! Component: 1650 - total flux cleaned = -0.00205234 Jy ! Component: 1700 - total flux cleaned = -0.00202796 Jy ! Component: 1750 - total flux cleaned = -0.00199162 Jy ! Component: 1800 - total flux cleaned = -0.00200382 Jy ! Component: 1850 - total flux cleaned = -0.00200385 Jy ! Component: 1900 - total flux cleaned = -0.00195652 Jy ! Component: 1950 - total flux cleaned = -0.00195658 Jy ! Component: 2000 - total flux cleaned = -0.00194495 Jy ! Component: 2050 - total flux cleaned = -0.00189874 Jy ! Component: 2100 - total flux cleaned = -0.00185291 Jy ! Component: 2150 - total flux cleaned = -0.00183014 Jy ! Component: 2200 - total flux cleaned = -0.00179621 Jy ! Component: 2250 - total flux cleaned = -0.00177375 Jy ! Component: 2300 - total flux cleaned = -0.00175155 Jy ! Component: 2350 - total flux cleaned = -0.00170746 Jy ! Component: 2400 - total flux cleaned = -0.00175114 Jy ! Component: 2450 - total flux cleaned = -0.00169673 Jy ! Component: 2500 - total flux cleaned = -0.00165342 Jy ! Component: 2550 - total flux cleaned = -0.00162134 Jy ! Component: 2600 - total flux cleaned = -0.00161069 Jy ! Component: 2650 - total flux cleaned = -0.00156847 Jy ! Component: 2700 - total flux cleaned = -0.00156843 Jy ! Component: 2750 - total flux cleaned = -0.00156847 Jy ! Component: 2800 - total flux cleaned = -0.00155807 Jy ! Component: 2850 - total flux cleaned = -0.00155812 Jy ! Component: 2900 - total flux cleaned = -0.00157853 Jy ! Component: 2950 - total flux cleaned = -0.00158871 Jy ! Component: 3000 - total flux cleaned = -0.0015987 Jy ! Component: 3050 - total flux cleaned = -0.00157858 Jy ! Component: 3100 - total flux cleaned = -0.00159847 Jy ! Component: 3150 - total flux cleaned = -0.00159847 Jy ! Component: 3200 - total flux cleaned = -0.00157874 Jy ! Component: 3250 - total flux cleaned = -0.00157879 Jy ! Component: 3300 - total flux cleaned = -0.00157879 Jy ! Component: 3350 - total flux cleaned = -0.00155951 Jy ! Component: 3400 - total flux cleaned = -0.00154986 Jy ! Component: 3450 - total flux cleaned = -0.00154034 Jy ! Component: 3500 - total flux cleaned = -0.00149275 Jy ! Component: 3550 - total flux cleaned = -0.0014833 Jy ! Component: 3600 - total flux cleaned = -0.00147396 Jy ! Component: 3650 - total flux cleaned = -0.00142719 Jy ! Component: 3700 - total flux cleaned = -0.00142725 Jy ! Component: 3750 - total flux cleaned = -0.00139023 Jy ! Component: 3800 - total flux cleaned = -0.00138104 Jy ! Component: 3850 - total flux cleaned = -0.00135353 Jy ! Component: 3900 - total flux cleaned = -0.0013536 Jy ! Component: 3950 - total flux cleaned = -0.00131738 Jy ! Component: 4000 - total flux cleaned = -0.00131742 Jy ! Component: 4050 - total flux cleaned = -0.00130845 Jy ! Total flux subtracted in 4096 components = -0.00125496 Jy ! Clean residual min=-0.000531 max=0.000487 Jy/beam ! Clean residual mean=-0.000000 rms=0.000154 Jy/beam ! Combined flux in latest and established models = 0.0287894 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 316 components and 0.0287894 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsc_uvs/J0911+8607_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8374 x 2.873 at 21.46 degrees (North through East) ! Clean map min=-0.00106 max=0.028328 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J0911+8607_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0283285 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000153948 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.63032 1.63032 3.26063 6.52126 13.0425 26.085 52.1701 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.028 quit ! Quitting program ! Log file /g0/scr/pima/npcsc_uvs/J0911+8607_X_uvs.log closed on Sun Oct 6 14:24:04 2013