! Started logfile: /g0/scr/pima/npcsc_uvs/J0911+8607_S_uvs.log on Sun Oct  6 14:27:45 2013
obs /g0/scr/pima/npcsc_uvs/J0911+8607_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J0911+8607_S_uva.fits
! AN table 1: 46 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.6 visibilities/baseline/integration-bin.
! Found source: J0911+8607
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 4968 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J0911+8607_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 92 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 92 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 92 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 92 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001574Jy  sigma=0.805181
! Fit after  self-cal, rms=0.946634Jy  sigma=0.721867
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.116 mas, bmaj=15.28 mas, bpa=35.87 degrees
! Estimated noise=31.3087 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0620425 Jy
! Component: 100  -  total flux cleaned = 0.076726 Jy
! Total flux subtracted in 100 components = 0.076726 Jy
! Clean residual min=-0.009117 max=0.008932 Jy/beam
! Clean residual mean=-0.000044 rms=0.002422 Jy/beam
! Combined flux in latest and established models = 0.076726 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.076726 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089193Jy  sigma=0.079757
! Fit after  self-cal, rms=0.087852Jy  sigma=0.078738
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.164 mas, bmaj=15.68 mas, bpa=35.39 degrees
! Estimated noise=14.5741 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0130876 Jy
! Component: 100  -  total flux cleaned = 0.0200309 Jy
! Component: 150  -  total flux cleaned = 0.0245304 Jy
! Component: 200  -  total flux cleaned = 0.0275899 Jy
! Total flux subtracted in 200 components = 0.0275899 Jy
! Clean residual min=-0.006067 max=0.005887 Jy/beam
! Clean residual mean=0.000031 rms=0.001793 Jy/beam
! Combined flux in latest and established models = 0.104316 Jy
! Performing phase self-cal
! Adding 64 model components to the UV plane model.
! The established model now contains 77 components and 0.104316 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089323Jy  sigma=0.074872
! Fit after  self-cal, rms=0.089107Jy  sigma=0.074648
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.76     HN        1.00*    KP        0.95     
!   LA        1.00     MK        0.88     NL        0.88     OV        0.98     
!   PT        0.96     SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.85     HN        1.00*    KP        0.93     
!   LA        0.90     MK        0.75     NL        0.89     OV        0.97     
!   PT        0.91     SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        0.79     HN        1.00*    KP        0.91     
!   LA        0.73     MK        0.93     NL        0.98     OV        1.01     
!   PT        1.05     SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.85     HN        1.00*    KP        0.87     
!   LA        0.59     MK        1.01     NL        0.79     OV        0.79     
!   PT        0.97     SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.089107Jy  sigma=0.074648
! Fit after  self-cal, rms=0.076464Jy  sigma=0.070093
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.153 mas, bmaj=15.84 mas, bpa=35.5 degrees
! Estimated noise=11.4332 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0135836 Jy
! Component: 100  -  total flux cleaned = -0.0171868 Jy
! Component: 150  -  total flux cleaned = -0.0188513 Jy
! Component: 200  -  total flux cleaned = -0.0192833 Jy
! Total flux subtracted in 200 components = -0.0192833 Jy
! Clean residual min=-0.003258 max=0.003157 Jy/beam
! Clean residual mean=0.000019 rms=0.000855 Jy/beam
! Combined flux in latest and established models = 0.0850326 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 99 components and 0.0850326 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069774Jy  sigma=0.072251
! Fit after  self-cal, rms=0.069936Jy  sigma=0.072112
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069936Jy  sigma=0.072112
! Fit after  self-cal, rms=0.061620Jy  sigma=0.069835
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.119 mas, bmaj=15.79 mas, bpa=35.51 degrees
! Estimated noise=9.17992 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.010811 Jy
! Component: 100  -  total flux cleaned = -0.0137699 Jy
! Component: 150  -  total flux cleaned = -0.014985 Jy
! Component: 200  -  total flux cleaned = -0.015655 Jy
! Total flux subtracted in 200 components = -0.015655 Jy
! Clean residual min=-0.002528 max=0.002584 Jy/beam
! Clean residual mean=0.000013 rms=0.000655 Jy/beam
! Combined flux in latest and established models = 0.0693776 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 105 components and 0.0693776 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056291Jy  sigma=0.072038
! Fit after  self-cal, rms=0.056310Jy  sigma=0.072028
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.41529e-05 Jy
! Component: 100  -  total flux cleaned = -0.000135646 Jy
! Component: 150  -  total flux cleaned = -0.000217033 Jy
! Component: 200  -  total flux cleaned = -0.000325199 Jy
! Total flux subtracted in 200 components = -0.000325199 Jy
! Clean residual min=-0.002581 max=0.002550 Jy/beam
! Clean residual mean=0.000011 rms=0.000658 Jy/beam
! Combined flux in latest and established models = 0.0690524 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 122 components and 0.0690524 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056226Jy  sigma=0.072091
! Fit after  self-cal, rms=0.056213Jy  sigma=0.072087
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056213Jy  sigma=0.072087
! Fit after  self-cal, rms=0.049242Jy  sigma=0.069719
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.071 mas, bmaj=15.73 mas, bpa=35.51 degrees
! Estimated noise=7.35173 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0083902 Jy
! Component: 100  -  total flux cleaned = -0.0107359 Jy
! Component: 150  -  total flux cleaned = -0.0116424 Jy
! Component: 200  -  total flux cleaned = -0.0120971 Jy
! Total flux subtracted in 200 components = -0.0120971 Jy
! Clean residual min=-0.001954 max=0.002146 Jy/beam
! Clean residual mean=0.000010 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.0569553 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 129 components and 0.0569553 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.045111Jy  sigma=0.071954
! Fit after  self-cal, rms=0.045060Jy  sigma=0.071889
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000289812 Jy
! Component: 100  -  total flux cleaned = -0.000359963 Jy
! Component: 150  -  total flux cleaned = -0.000409164 Jy
! Component: 200  -  total flux cleaned = -0.000453924 Jy
! Total flux subtracted in 200 components = -0.000453924 Jy
! Clean residual min=-0.001996 max=0.002095 Jy/beam
! Clean residual mean=0.000007 rms=0.000510 Jy/beam
! Combined flux in latest and established models = 0.0565013 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 139 components and 0.0565013 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.045014Jy  sigma=0.071939
! Fit after  self-cal, rms=0.045015Jy  sigma=0.071937
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.045015Jy  sigma=0.071937
! Fit after  self-cal, rms=0.039448Jy  sigma=0.069557
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.484 mas, bmaj=15.9 mas, bpa=33.27 degrees
! Estimated noise=6.79798 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00684177 Jy
! Component: 100  -  total flux cleaned = -0.00881589 Jy
! Component: 150  -  total flux cleaned = -0.00961502 Jy
! Component: 200  -  total flux cleaned = -0.0100115 Jy
! Total flux subtracted in 200 components = -0.0100115 Jy
! Clean residual min=-0.001802 max=0.001598 Jy/beam
! Clean residual mean=0.000011 rms=0.000487 Jy/beam
! Combined flux in latest and established models = 0.0464898 Jy
selfcal
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 163 components and 0.0464898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.036160Jy  sigma=0.071751
! Fit after  self-cal, rms=0.036161Jy  sigma=0.071735
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000171491 Jy
! Component: 100  -  total flux cleaned = -0.000200559 Jy
! Component: 150  -  total flux cleaned = -0.000224877 Jy
! Component: 200  -  total flux cleaned = -0.000235241 Jy
! Total flux subtracted in 200 components = -0.000235241 Jy
! Clean residual min=-0.001853 max=0.001526 Jy/beam
! Clean residual mean=0.000008 rms=0.000489 Jy/beam
! Combined flux in latest and established models = 0.0462546 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 182 components and 0.0462546 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.036118Jy  sigma=0.071804
! Fit after  self-cal, rms=0.036118Jy  sigma=0.071803
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.026 mas, bmaj=15.68 mas, bpa=35.49 degrees
! Estimated noise=5.88039 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.026 x 15.68 at 35.49 degrees (North through East)
! Clean map  min=-0.0018362  max=0.033089 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.026 mas, bmaj=15.43 mas, bpa=35.94 degrees
! Estimated noise=12.3183 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.024798 Jy
! Component: 100  -  total flux cleaned = 0.0314768 Jy
! Component: 150  -  total flux cleaned = 0.0347185 Jy
! Component: 200  -  total flux cleaned = 0.0364262 Jy
! Total flux subtracted in 200 components = 0.0364262 Jy
! Clean residual min=-0.003299 max=0.003105 Jy/beam
! Clean residual mean=-0.000016 rms=0.000903 Jy/beam
! Combined flux in latest and established models = 0.0364262 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 0.0364262 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.026 mas, bmaj=15.68 mas, bpa=35.49 degrees
! Estimated noise=5.88039 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-9, -12).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00395859 Jy
! Component: 100  -  total flux cleaned = 0.00623968 Jy
! Component: 150  -  total flux cleaned = 0.00740191 Jy
! Component: 200  -  total flux cleaned = 0.00789048 Jy
! Total flux subtracted in 200 components = 0.00789048 Jy
! Clean residual min=-0.001803 max=0.001744 Jy/beam
! Clean residual mean=-0.000011 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.0443167 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 73 components and 0.0443167 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.484 mas, bmaj=15.9 mas, bpa=33.27 degrees
! Estimated noise=6.79798 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00119733 Jy
! Component: 100  -  total flux cleaned = 0.00151974 Jy
! Component: 150  -  total flux cleaned = 0.00174664 Jy
! Component: 200  -  total flux cleaned = 0.00202509 Jy
! Total flux subtracted in 200 components = 0.00202509 Jy
! Clean residual min=-0.001737 max=0.001486 Jy/beam
! Clean residual mean=-0.000004 rms=0.000448 Jy/beam
! Combined flux in latest and established models = 0.0463417 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000246764 Jy
! Component: 100  -  total flux cleaned = 0.000429294 Jy
! Component: 150  -  total flux cleaned = 0.000596045 Jy
! Component: 200  -  total flux cleaned = 0.000749316 Jy
! Total flux subtracted in 200 components = 0.000749316 Jy
! Clean residual min=-0.001612 max=0.001461 Jy/beam
! Clean residual mean=-0.000001 rms=0.000420 Jy/beam
! Combined flux in latest and established models = 0.0470911 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 117 components and 0.0470911 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.026 mas, bmaj=15.68 mas, bpa=35.49 degrees
! Estimated noise=5.88039 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000159796 Jy
! Component: 100  -  total flux cleaned = -0.000159968 Jy
! Component: 150  -  total flux cleaned = -8.32498e-05 Jy
! Component: 200  -  total flux cleaned = 4.1753e-06 Jy
! Total flux subtracted in 200 components = 4.1753e-06 Jy
! Clean residual min=-0.001475 max=0.001568 Jy/beam
! Clean residual mean=-0.000000 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.0470952 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 140 components and 0.0470952 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.036016Jy  sigma=0.071802
! Fit after  self-cal, rms=0.035995Jy  sigma=0.071753
wmodel /g0/scr/pima/npcsc_uvs/J0911+8607_S_map.mod
! Writing 140 model components to file: /g0/scr/pima/npcsc_uvs/J0911+8607_S_map.mod
wobs /g0/scr/pima/npcsc_uvs/J0911+8607_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J0911+8607_S_uvs.fits
wwins /g0/scr/pima/npcsc_uvs/J0911+8607_S_map.win
! wwins: Wrote 2 windows to /g0/scr/pima/npcsc_uvs/J0911+8607_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -3.55076e-05 Jy
! Component: 100  -  total flux cleaned = -0.000177579 Jy
! Component: 150  -  total flux cleaned = -0.000239366 Jy
! Component: 200  -  total flux cleaned = -0.000182488 Jy
! Component: 250  -  total flux cleaned = -0.000128053 Jy
! Component: 300  -  total flux cleaned = -4.25298e-05 Jy
! Component: 350  -  total flux cleaned = -2.59674e-05 Jy
! Component: 400  -  total flux cleaned = 2.07003e-05 Jy
! Component: 450  -  total flux cleaned = 3.55943e-05 Jy
! Component: 500  -  total flux cleaned = 6.51541e-05 Jy
! Component: 550  -  total flux cleaned = 0.00010785 Jy
! Component: 600  -  total flux cleaned = 0.000135186 Jy
! Component: 650  -  total flux cleaned = 0.000122128 Jy
! Component: 700  -  total flux cleaned = 0.000109183 Jy
! Component: 750  -  total flux cleaned = 9.66182e-05 Jy
! Component: 800  -  total flux cleaned = -3.21176e-06 Jy
! Component: 850  -  total flux cleaned = -5.17185e-05 Jy
! Component: 900  -  total flux cleaned = -9.95547e-05 Jy
! Component: 950  -  total flux cleaned = -0.000204739 Jy
! Component: 1000  -  total flux cleaned = -0.000261773 Jy
! Component: 1050  -  total flux cleaned = -0.000340717 Jy
! Component: 1100  -  total flux cleaned = -0.000374059 Jy
! Component: 1150  -  total flux cleaned = -0.000461031 Jy
! Component: 1200  -  total flux cleaned = -0.000503474 Jy
! Component: 1250  -  total flux cleaned = -0.000545297 Jy
! Component: 1300  -  total flux cleaned = -0.000534905 Jy
! Component: 1350  -  total flux cleaned = -0.000545178 Jy
! Component: 1400  -  total flux cleaned = -0.000555251 Jy
! Component: 1450  -  total flux cleaned = -0.000535394 Jy
! Component: 1500  -  total flux cleaned = -0.000535557 Jy
! Component: 1550  -  total flux cleaned = -0.000555124 Jy
! Component: 1600  -  total flux cleaned = -0.000593464 Jy
! Component: 1650  -  total flux cleaned = -0.000593524 Jy
! Component: 1700  -  total flux cleaned = -0.000584053 Jy
! Component: 1750  -  total flux cleaned = -0.000602591 Jy
! Component: 1800  -  total flux cleaned = -0.000565475 Jy
! Component: 1850  -  total flux cleaned = -0.000547135 Jy
! Component: 1900  -  total flux cleaned = -0.000510909 Jy
! Component: 1950  -  total flux cleaned = -0.00051993 Jy
! Component: 2000  -  total flux cleaned = -0.000502006 Jy
! Component: 2050  -  total flux cleaned = -0.000484352 Jy
! Component: 2100  -  total flux cleaned = -0.00047555 Jy
! Component: 2150  -  total flux cleaned = -0.000466905 Jy
! Component: 2200  -  total flux cleaned = -0.000449715 Jy
! Component: 2250  -  total flux cleaned = -0.000466979 Jy
! Component: 2300  -  total flux cleaned = -0.00044142 Jy
! Component: 2350  -  total flux cleaned = -0.00041595 Jy
! Component: 2400  -  total flux cleaned = -0.000382241 Jy
! Component: 2450  -  total flux cleaned = -0.00038226 Jy
! Component: 2500  -  total flux cleaned = -0.000348873 Jy
! Component: 2550  -  total flux cleaned = -0.000340513 Jy
! Component: 2600  -  total flux cleaned = -0.000299266 Jy
! Component: 2650  -  total flux cleaned = -0.000274652 Jy
! Component: 2700  -  total flux cleaned = -0.000266497 Jy
! Component: 2750  -  total flux cleaned = -0.00023399 Jy
! Component: 2800  -  total flux cleaned = -0.000225907 Jy
! Component: 2850  -  total flux cleaned = -0.000217801 Jy
! Component: 2900  -  total flux cleaned = -0.00020984 Jy
! Component: 2950  -  total flux cleaned = -0.000201815 Jy
! Component: 3000  -  total flux cleaned = -0.000177933 Jy
! Component: 3050  -  total flux cleaned = -0.000185863 Jy
! Component: 3100  -  total flux cleaned = -0.000170028 Jy
! Component: 3150  -  total flux cleaned = -0.000162145 Jy
! Component: 3200  -  total flux cleaned = -0.000146482 Jy
! Component: 3250  -  total flux cleaned = -0.000138637 Jy
! Component: 3300  -  total flux cleaned = -0.00013858 Jy
! Component: 3350  -  total flux cleaned = -0.000107469 Jy
! Component: 3400  -  total flux cleaned = -9.20069e-05 Jy
! Component: 3450  -  total flux cleaned = -8.43253e-05 Jy
! Component: 3500  -  total flux cleaned = -6.89283e-05 Jy
! Component: 3550  -  total flux cleaned = -3.05734e-05 Jy
! Component: 3600  -  total flux cleaned = -7.67504e-06 Jy
! Component: 3650  -  total flux cleaned = -7.64657e-06 Jy
! Component: 3700  -  total flux cleaned = 7.62401e-06 Jy
! Component: 3750  -  total flux cleaned = 5.30944e-05 Jy
! Component: 3800  -  total flux cleaned = 6.82537e-05 Jy
! Component: 3850  -  total flux cleaned = 9.09096e-05 Jy
! Component: 3900  -  total flux cleaned = 0.000105946 Jy
! Component: 3950  -  total flux cleaned = 0.00011345 Jy
! Component: 4000  -  total flux cleaned = 0.000128465 Jy
! Component: 4050  -  total flux cleaned = 0.000150879 Jy
! Total flux subtracted in 4096 components = 0.000135913 Jy
! Clean residual min=-0.000434 max=0.000442 Jy/beam
! Clean residual mean=0.000002 rms=0.000139 Jy/beam
! Combined flux in latest and established models = 0.0472311 Jy
keep
! Adding 245 model components to the UV plane model.
! The established model now contains 385 components and 0.0472311 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsc_uvs/J0911+8607_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.026 x 15.68 at 35.49 degrees (North through East)
! Clean map  min=-0.0010263  max=0.03292 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J0911+8607_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0329204 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00014049 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.28027 1.28027 2.56054 5.12108 10.2422 20.4843 40.9686 81.9372
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0004 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.032 
quit
! Quitting program
! Log file /g0/scr/pima/npcsc_uvs/J0911+8607_S_uvs.log closed on Sun Oct  6 14:27:49 2013