! Started logfile: /g0/scr/pima/npcsc_uvs/J0806+7746_X_uvs.log on Sun Oct 6 14:23:44 2013 obs /g0/scr/pima/npcsc_uvs/J0806+7746_X_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J0806+7746_X_uva.fits ! AN table 1: 47 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.985816 visibilities/baseline/integration-bin. ! Found source: J0806+7746 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 8340 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J0806+7746_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.008068Jy sigma=1.136927 ! Fit after self-cal, rms=0.897730Jy sigma=0.960625 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5867 mas, bmaj=2.741 mas, bpa=9.679 degrees ! Estimated noise=14.3363 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0994495 Jy ! Component: 100 - total flux cleaned = 0.121239 Jy ! Total flux subtracted in 100 components = 0.121239 Jy ! Clean residual min=-0.007002 max=0.006422 Jy/beam ! Clean residual mean=-0.000000 rms=0.001616 Jy/beam ! Combined flux in latest and established models = 0.121239 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.121239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086532Jy sigma=0.097021 ! Fit after self-cal, rms=0.085769Jy sigma=0.096232 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8085 mas, bmaj=2.835 mas, bpa=8.803 degrees ! Estimated noise=7.55675 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00748132 Jy ! Component: 100 - total flux cleaned = 0.0103883 Jy ! Component: 150 - total flux cleaned = 0.0120954 Jy ! Component: 200 - total flux cleaned = 0.0132278 Jy ! Total flux subtracted in 200 components = 0.0132278 Jy ! Clean residual min=-0.003594 max=0.003422 Jy/beam ! Clean residual mean=0.000003 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.134467 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 24 components and 0.134467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087398Jy sigma=0.093451 ! Fit after self-cal, rms=0.087407Jy sigma=0.093446 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.95 HN 0.94 KP 0.95 ! LA 0.99 MK 0.91 NL 0.99 OV 0.94 ! PT 0.98 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.99 HN 0.96 KP 0.90 ! LA 0.93 MK 0.91 NL 0.94 OV 0.93 ! PT 1.03 SC 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.92 HN 0.90 KP 0.79 ! LA 0.92 MK 0.89 NL 0.95 OV 0.93 ! PT 0.97 SC 0.89 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.96 HN 0.91 KP 0.85 ! LA 0.88 MK 0.87 NL 0.94 OV 0.88 ! PT 1.04 SC 0.97 ! ! ! Fit before self-cal, rms=0.087407Jy sigma=0.093446 ! Fit after self-cal, rms=0.081325Jy sigma=0.090189 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8001 mas, bmaj=2.83 mas, bpa=8.871 degrees ! Estimated noise=6.58206 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0126674 Jy ! Component: 100 - total flux cleaned = -0.0150872 Jy ! Component: 150 - total flux cleaned = -0.0147541 Jy ! Component: 200 - total flux cleaned = -0.0144365 Jy ! Total flux subtracted in 200 components = -0.0144365 Jy ! Clean residual min=-0.002199 max=0.002286 Jy/beam ! Clean residual mean=-0.000001 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.120031 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 32 components and 0.120031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075537Jy sigma=0.092410 ! Fit after self-cal, rms=0.075563Jy sigma=0.092393 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075563Jy sigma=0.092393 ! Fit after self-cal, rms=0.071323Jy sigma=0.090161 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7956 mas, bmaj=2.829 mas, bpa=8.911 degrees ! Estimated noise=5.78461 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0111227 Jy ! Component: 100 - total flux cleaned = -0.0135058 Jy ! Component: 150 - total flux cleaned = -0.0133651 Jy ! Component: 200 - total flux cleaned = -0.0131314 Jy ! Total flux subtracted in 200 components = -0.0131314 Jy ! Clean residual min=-0.001932 max=0.001998 Jy/beam ! Clean residual mean=-0.000001 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.106899 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 36 components and 0.106899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066241Jy sigma=0.092411 ! Fit after self-cal, rms=0.066242Jy sigma=0.092411 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (14.4, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000953721 Jy ! Component: 100 - total flux cleaned = 0.00107796 Jy ! Component: 150 - total flux cleaned = 0.00107843 Jy ! Component: 200 - total flux cleaned = 0.00118671 Jy ! Total flux subtracted in 200 components = 0.00118671 Jy ! Clean residual min=-0.001928 max=0.001957 Jy/beam ! Clean residual mean=-0.000001 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.108086 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 57 components and 0.108086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066173Jy sigma=0.092334 ! Fit after self-cal, rms=0.066168Jy sigma=0.092324 ! Inverting map ! Added new window around map position (-38.8, 12.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167985 Jy ! Component: 100 - total flux cleaned = 0.00218577 Jy ! Component: 150 - total flux cleaned = 0.00233311 Jy ! Component: 200 - total flux cleaned = 0.00257429 Jy ! Total flux subtracted in 200 components = 0.00257429 Jy ! Clean residual min=-0.001897 max=0.001739 Jy/beam ! Clean residual mean=-0.000001 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.11066 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 75 components and 0.11066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066094Jy sigma=0.092263 ! Fit after self-cal, rms=0.066094Jy sigma=0.092254 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066094Jy sigma=0.092254 ! Fit after self-cal, rms=0.062276Jy sigma=0.089938 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7909 mas, bmaj=2.827 mas, bpa=8.965 degrees ! Estimated noise=5.07113 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0097502 Jy ! Component: 100 - total flux cleaned = -0.0118764 Jy ! Component: 150 - total flux cleaned = -0.0117783 Jy ! Component: 200 - total flux cleaned = -0.0116844 Jy ! Total flux subtracted in 200 components = -0.0116844 Jy ! Clean residual min=-0.001713 max=0.001535 Jy/beam ! Clean residual mean=-0.000001 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.0989758 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 79 components and 0.0989758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057845Jy sigma=0.092158 ! Fit after self-cal, rms=0.057847Jy sigma=0.092156 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000187044 Jy ! Component: 100 - total flux cleaned = 0.000331717 Jy ! Component: 150 - total flux cleaned = 0.000428552 Jy ! Component: 200 - total flux cleaned = 0.000539309 Jy ! Total flux subtracted in 200 components = 0.000539309 Jy ! Clean residual min=-0.001698 max=0.001531 Jy/beam ! Clean residual mean=-0.000001 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.0995151 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 87 components and 0.0995151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057811Jy sigma=0.092163 ! Fit after self-cal, rms=0.057810Jy sigma=0.092162 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057810Jy sigma=0.092162 ! Fit after self-cal, rms=0.054555Jy sigma=0.089896 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.02 mas, bmaj=3.235 mas, bpa=7.038 degrees ! Estimated noise=5.80981 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00809062 Jy ! Component: 100 - total flux cleaned = -0.00979059 Jy ! Component: 150 - total flux cleaned = -0.0100754 Jy ! Component: 200 - total flux cleaned = -0.0100789 Jy ! Total flux subtracted in 200 components = -0.0100789 Jy ! Clean residual min=-0.001355 max=0.001297 Jy/beam ! Clean residual mean=-0.000001 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.0894362 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 95 components and 0.0894362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050848Jy sigma=0.091890 ! Fit after self-cal, rms=0.050849Jy sigma=0.091888 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000118154 Jy ! Component: 100 - total flux cleaned = 0.000163155 Jy ! Component: 150 - total flux cleaned = 0.000256671 Jy ! Component: 200 - total flux cleaned = 0.000317079 Jy ! Total flux subtracted in 200 components = 0.000317079 Jy ! Clean residual min=-0.001303 max=0.001246 Jy/beam ! Clean residual mean=-0.000002 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.0897532 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 108 components and 0.0897532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050813Jy sigma=0.091939 ! Fit after self-cal, rms=0.050813Jy sigma=0.091938 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.7868 mas, bmaj=2.826 mas, bpa=9.004 degrees ! Estimated noise=4.45219 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7868 x 2.826 at 9.004 degrees (North through East) ! Clean map min=-0.0013499 max=0.076765 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5739 mas, bmaj=2.749 mas, bpa=9.845 degrees ! Estimated noise=8.21646 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0571302 Jy ! Component: 100 - total flux cleaned = 0.0699953 Jy ! Component: 150 - total flux cleaned = 0.0746866 Jy ! Component: 200 - total flux cleaned = 0.0779892 Jy ! Total flux subtracted in 200 components = 0.0779892 Jy ! Clean residual min=-0.003715 max=0.003266 Jy/beam ! Clean residual mean=-0.000001 rms=0.000857 Jy/beam ! Combined flux in latest and established models = 0.0779892 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0779892 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7868 mas, bmaj=2.826 mas, bpa=9.004 degrees ! Estimated noise=4.45219 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00402173 Jy ! Component: 100 - total flux cleaned = 0.00607492 Jy ! Component: 150 - total flux cleaned = 0.00710247 Jy ! Component: 200 - total flux cleaned = 0.00763519 Jy ! Total flux subtracted in 200 components = 0.00763519 Jy ! Clean residual min=-0.001625 max=0.001532 Jy/beam ! Clean residual mean=-0.000002 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.0856244 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 47 components and 0.0856244 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.02 mas, bmaj=3.235 mas, bpa=7.038 degrees ! Estimated noise=5.80981 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00161321 Jy ! Component: 100 - total flux cleaned = 0.00214853 Jy ! Component: 150 - total flux cleaned = 0.00248209 Jy ! Component: 200 - total flux cleaned = 0.00282097 Jy ! Total flux subtracted in 200 components = 0.00282097 Jy ! Clean residual min=-0.001465 max=0.001319 Jy/beam ! Clean residual mean=-0.000002 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.0884454 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000266668 Jy ! Component: 100 - total flux cleaned = 0.000477498 Jy ! Component: 150 - total flux cleaned = 0.000661106 Jy ! Component: 200 - total flux cleaned = 0.000829447 Jy ! Total flux subtracted in 200 components = 0.000829447 Jy ! Clean residual min=-0.001375 max=0.001274 Jy/beam ! Clean residual mean=-0.000002 rms=0.000350 Jy/beam ! Combined flux in latest and established models = 0.0892748 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 90 components and 0.0892748 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7868 mas, bmaj=2.826 mas, bpa=9.004 degrees ! Estimated noise=4.45219 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.69975e-05 Jy ! Component: 100 - total flux cleaned = -8.43012e-05 Jy ! Component: 150 - total flux cleaned = -8.34642e-05 Jy ! Component: 200 - total flux cleaned = -0.000126092 Jy ! Total flux subtracted in 200 components = -0.000126092 Jy ! Clean residual min=-0.001464 max=0.001253 Jy/beam ! Clean residual mean=-0.000001 rms=0.000327 Jy/beam ! Combined flux in latest and established models = 0.0891487 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 109 components and 0.0891487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050557Jy sigma=0.092346 ! Fit after self-cal, rms=0.050551Jy sigma=0.092337 wmodel /g0/scr/pima/npcsc_uvs/J0806+7746_X_map.mod ! Writing 109 model components to file: /g0/scr/pima/npcsc_uvs/J0806+7746_X_map.mod wobs /g0/scr/pima/npcsc_uvs/J0806+7746_X_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J0806+7746_X_uvs.fits wwins /g0/scr/pima/npcsc_uvs/J0806+7746_X_map.win ! wwins: Wrote 3 windows to /g0/scr/pima/npcsc_uvs/J0806+7746_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000674168 Jy ! Component: 100 - total flux cleaned = -0.001137 Jy ! Component: 150 - total flux cleaned = -0.00136612 Jy ! Component: 200 - total flux cleaned = -0.0014985 Jy ! Component: 250 - total flux cleaned = -0.00158385 Jy ! Component: 300 - total flux cleaned = -0.00168685 Jy ! Component: 350 - total flux cleaned = -0.00182774 Jy ! Component: 400 - total flux cleaned = -0.00194608 Jy ! Component: 450 - total flux cleaned = -0.0020238 Jy ! Component: 500 - total flux cleaned = -0.00208125 Jy ! Component: 550 - total flux cleaned = -0.00219377 Jy ! Component: 600 - total flux cleaned = -0.00228564 Jy ! Component: 650 - total flux cleaned = -0.00235819 Jy ! Component: 700 - total flux cleaned = -0.00235814 Jy ! Component: 750 - total flux cleaned = -0.0024117 Jy ! Component: 800 - total flux cleaned = -0.00244699 Jy ! Component: 850 - total flux cleaned = -0.00249912 Jy ! Component: 900 - total flux cleaned = -0.00251639 Jy ! Component: 950 - total flux cleaned = -0.0025673 Jy ! Component: 1000 - total flux cleaned = -0.0026177 Jy ! Component: 1050 - total flux cleaned = -0.00265092 Jy ! Component: 1100 - total flux cleaned = -0.00270034 Jy ! Component: 1150 - total flux cleaned = -0.00276542 Jy ! Component: 1200 - total flux cleaned = -0.00271676 Jy ! Component: 1250 - total flux cleaned = -0.00279728 Jy ! Component: 1300 - total flux cleaned = -0.00284513 Jy ! Component: 1350 - total flux cleaned = -0.00284508 Jy ! Component: 1400 - total flux cleaned = -0.00290782 Jy ! Component: 1450 - total flux cleaned = -0.00289208 Jy ! Component: 1500 - total flux cleaned = -0.00292307 Jy ! Component: 1550 - total flux cleaned = -0.00296915 Jy ! Component: 1600 - total flux cleaned = -0.00301482 Jy ! Component: 1650 - total flux cleaned = -0.00303004 Jy ! Component: 1700 - total flux cleaned = -0.00305996 Jy ! Component: 1750 - total flux cleaned = -0.00305993 Jy ! Component: 1800 - total flux cleaned = -0.00313401 Jy ! Component: 1850 - total flux cleaned = -0.00316321 Jy ! Component: 1900 - total flux cleaned = -0.00316315 Jy ! Component: 1950 - total flux cleaned = -0.00317765 Jy ! Component: 2000 - total flux cleaned = -0.00316307 Jy ! Component: 2050 - total flux cleaned = -0.00314872 Jy ! Component: 2100 - total flux cleaned = -0.0031773 Jy ! Component: 2150 - total flux cleaned = -0.00320554 Jy ! Component: 2200 - total flux cleaned = -0.00316321 Jy ! Component: 2250 - total flux cleaned = -0.00320507 Jy ! Component: 2300 - total flux cleaned = -0.00317728 Jy ! Component: 2350 - total flux cleaned = -0.0032048 Jy ! Component: 2400 - total flux cleaned = -0.00317749 Jy ! Component: 2450 - total flux cleaned = -0.00317739 Jy ! Component: 2500 - total flux cleaned = -0.00316375 Jy ! Component: 2550 - total flux cleaned = -0.00316381 Jy ! Component: 2600 - total flux cleaned = -0.00316389 Jy ! Component: 2650 - total flux cleaned = -0.0032038 Jy ! Component: 2700 - total flux cleaned = -0.00323026 Jy ! Component: 2750 - total flux cleaned = -0.00320389 Jy ! Component: 2800 - total flux cleaned = -0.00323006 Jy ! Component: 2850 - total flux cleaned = -0.00326908 Jy ! Component: 2900 - total flux cleaned = -0.00320435 Jy ! Component: 2950 - total flux cleaned = -0.00324312 Jy ! Component: 3000 - total flux cleaned = -0.00323026 Jy ! Component: 3050 - total flux cleaned = -0.00329402 Jy ! Component: 3100 - total flux cleaned = -0.00325595 Jy ! Component: 3150 - total flux cleaned = -0.00330649 Jy ! Component: 3200 - total flux cleaned = -0.00329391 Jy ! Component: 3250 - total flux cleaned = -0.00328128 Jy ! Component: 3300 - total flux cleaned = -0.00331847 Jy ! Component: 3350 - total flux cleaned = -0.00331836 Jy ! Component: 3400 - total flux cleaned = -0.00334299 Jy ! Component: 3450 - total flux cleaned = -0.0033063 Jy ! Component: 3500 - total flux cleaned = -0.0033671 Jy ! Component: 3550 - total flux cleaned = -0.00340325 Jy ! Component: 3600 - total flux cleaned = -0.00336707 Jy ! Component: 3650 - total flux cleaned = -0.00330718 Jy ! Component: 3700 - total flux cleaned = -0.00335495 Jy ! Component: 3750 - total flux cleaned = -0.00333111 Jy ! Component: 3800 - total flux cleaned = -0.00331914 Jy ! Component: 3850 - total flux cleaned = -0.00328389 Jy ! Component: 3900 - total flux cleaned = -0.00331897 Jy ! Component: 3950 - total flux cleaned = -0.00329572 Jy ! Component: 4000 - total flux cleaned = -0.00329575 Jy ! Component: 4050 - total flux cleaned = -0.00327273 Jy ! Total flux subtracted in 4096 components = -0.00329564 Jy ! Clean residual min=-0.000726 max=0.000745 Jy/beam ! Clean residual mean=0.000000 rms=0.000203 Jy/beam ! Combined flux in latest and established models = 0.0858531 Jy keep ! Adding 283 model components to the UV plane model. ! The established model now contains 392 components and 0.0858531 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsc_uvs/J0806+7746_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7868 x 2.826 at 9.004 degrees (North through East) ! Clean map min=-0.0011881 max=0.076354 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J0806+7746_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0763538 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000202395 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.795227 0.795227 1.59045 3.18091 6.36181 12.7236 25.4473 50.8945 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.076 quit ! Quitting program ! Log file /g0/scr/pima/npcsc_uvs/J0806+7746_X_uvs.log closed on Sun Oct 6 14:23:49 2013