! Started logfile: /g0/scr/pima/npcsc_uvs/J0806+7746_S_uvs.log on Sun Oct  6 14:27:26 2013
obs /g0/scr/pima/npcsc_uvs/J0806+7746_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J0806+7746_S_uva.fits
! AN table 1: 47 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.985816 visibilities/baseline/integration-bin.
! Found source: J0806+7746
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 8340 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J0806+7746_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.010920Jy  sigma=1.067955
! Fit after  self-cal, rms=0.900784Jy  sigma=0.897622
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.317 mas, bmaj=10.2 mas, bpa=9.523 degrees
! Estimated noise=15.4379 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.100757 Jy
! Component: 100  -  total flux cleaned = 0.122736 Jy
! Total flux subtracted in 100 components = 0.122736 Jy
! Clean residual min=-0.007252 max=0.007471 Jy/beam
! Clean residual mean=0.000001 rms=0.001915 Jy/beam
! Combined flux in latest and established models = 0.122736 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.122736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096817Jy  sigma=0.103169
! Fit after  self-cal, rms=0.096078Jy  sigma=0.102447
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.017 mas, bmaj=10.5 mas, bpa=9.174 degrees
! Estimated noise=8.13319 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00665385 Jy
! Component: 100  -  total flux cleaned = 0.00944768 Jy
! Component: 150  -  total flux cleaned = 0.0107574 Jy
! Component: 200  -  total flux cleaned = 0.0114637 Jy
! Total flux subtracted in 200 components = 0.0114637 Jy
! Clean residual min=-0.005586 max=0.004909 Jy/beam
! Clean residual mean=-0.000002 rms=0.001245 Jy/beam
! Combined flux in latest and established models = 0.1342 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.1342 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097566Jy  sigma=0.100353
! Fit after  self-cal, rms=0.097564Jy  sigma=0.100344
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.93     HN        0.86     KP        0.94     
!   LA        0.98     MK        0.87     NL        1.04     OV        0.95     
!   PT        1.00     SC        0.85     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.94     HN        0.89     KP        0.97     
!   LA        0.96     MK        0.89     NL        0.96     OV        0.94     
!   PT        0.96     SC        0.85     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.97     HN        0.86     KP        0.92     
!   LA        0.78     MK        1.04     NL        1.02     OV        0.95     
!   PT        1.08     SC        0.89     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.97     HN        0.83     KP        0.88     
!   LA        0.64     MK        1.01     NL        0.96     OV        0.85     
!   PT        0.94     SC        0.88     
! 
! 
! Fit before self-cal, rms=0.097564Jy  sigma=0.100344
! Fit after  self-cal, rms=0.087870Jy  sigma=0.095365
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.989 mas, bmaj=10.5 mas, bpa=8.805 degrees
! Estimated noise=6.97432 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0141027 Jy
! Component: 100  -  total flux cleaned = -0.0168819 Jy
! Component: 150  -  total flux cleaned = -0.017528 Jy
! Component: 200  -  total flux cleaned = -0.01777 Jy
! Total flux subtracted in 200 components = -0.01777 Jy
! Clean residual min=-0.002930 max=0.002939 Jy/beam
! Clean residual mean=0.000003 rms=0.000692 Jy/beam
! Combined flux in latest and established models = 0.11643 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 30 components and 0.11643 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081346Jy  sigma=0.097719
! Fit after  self-cal, rms=0.081438Jy  sigma=0.097618
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081438Jy  sigma=0.097618
! Fit after  self-cal, rms=0.076083Jy  sigma=0.095213
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.984 mas, bmaj=10.5 mas, bpa=8.758 degrees
! Estimated noise=6.04248 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0122194 Jy
! Component: 100  -  total flux cleaned = -0.0147904 Jy
! Component: 150  -  total flux cleaned = -0.0151806 Jy
! Component: 200  -  total flux cleaned = -0.0154401 Jy
! Total flux subtracted in 200 components = -0.0154401 Jy
! Clean residual min=-0.002508 max=0.002530 Jy/beam
! Clean residual mean=0.000003 rms=0.000591 Jy/beam
! Combined flux in latest and established models = 0.100989 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 38 components and 0.100989 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070424Jy  sigma=0.097620
! Fit after  self-cal, rms=0.070434Jy  sigma=0.097614
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.5, -90).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00076442 Jy
! Component: 100  -  total flux cleaned = 0.000516771 Jy
! Component: 150  -  total flux cleaned = 0.000468007 Jy
! Component: 200  -  total flux cleaned = 0.000469007 Jy
! Total flux subtracted in 200 components = 0.000469007 Jy
! Clean residual min=-0.002271 max=0.002198 Jy/beam
! Clean residual mean=0.000003 rms=0.000556 Jy/beam
! Combined flux in latest and established models = 0.101458 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 56 components and 0.101458 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070356Jy  sigma=0.097429
! Fit after  self-cal, rms=0.070352Jy  sigma=0.097414
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070352Jy  sigma=0.097414
! Fit after  self-cal, rms=0.065671Jy  sigma=0.094971
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.975 mas, bmaj=10.51 mas, bpa=8.773 degrees
! Estimated noise=5.22611 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.010578 Jy
! Component: 100  -  total flux cleaned = -0.0128027 Jy
! Component: 150  -  total flux cleaned = -0.0126918 Jy
! Component: 200  -  total flux cleaned = -0.0127588 Jy
! Total flux subtracted in 200 components = -0.0127588 Jy
! Clean residual min=-0.001964 max=0.001930 Jy/beam
! Clean residual mean=0.000002 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.0886997 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 64 components and 0.0886996 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060821Jy  sigma=0.097284
! Fit after  self-cal, rms=0.060826Jy  sigma=0.097281
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.85104e-06 Jy
! Component: 100  -  total flux cleaned = -8.04766e-06 Jy
! Component: 150  -  total flux cleaned = -3.71571e-05 Jy
! Component: 200  -  total flux cleaned = -6.43672e-05 Jy
! Total flux subtracted in 200 components = -6.43672e-05 Jy
! Clean residual min=-0.001917 max=0.001931 Jy/beam
! Clean residual mean=0.000002 rms=0.000469 Jy/beam
! Combined flux in latest and established models = 0.0886353 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 72 components and 0.0886353 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060773Jy  sigma=0.097275
! Fit after  self-cal, rms=0.060774Jy  sigma=0.097274
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060774Jy  sigma=0.097274
! Fit after  self-cal, rms=0.056766Jy  sigma=0.094853
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.013 mas, bmaj=11.77 mas, bpa=6.924 degrees
! Estimated noise=5.77323 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00893543 Jy
! Component: 100  -  total flux cleaned = -0.0108958 Jy
! Component: 150  -  total flux cleaned = -0.0111542 Jy
! Component: 200  -  total flux cleaned = -0.0113885 Jy
! Total flux subtracted in 200 components = -0.0113885 Jy
! Clean residual min=-0.001414 max=0.001624 Jy/beam
! Clean residual mean=0.000005 rms=0.000444 Jy/beam
! Combined flux in latest and established models = 0.0772468 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 94 components and 0.0772468 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052658Jy  sigma=0.097120
! Fit after  self-cal, rms=0.052661Jy  sigma=0.097108
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00025807 Jy
! Component: 100  -  total flux cleaned = -0.000419125 Jy
! Component: 150  -  total flux cleaned = -0.000521667 Jy
! Component: 200  -  total flux cleaned = -0.000562293 Jy
! Total flux subtracted in 200 components = -0.000562293 Jy
! Clean residual min=-0.001441 max=0.001551 Jy/beam
! Clean residual mean=0.000005 rms=0.000439 Jy/beam
! Combined flux in latest and established models = 0.0766845 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 120 components and 0.0766845 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052649Jy  sigma=0.097134
! Fit after  self-cal, rms=0.052651Jy  sigma=0.097133
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.969 mas, bmaj=10.52 mas, bpa=8.794 degrees
! Estimated noise=4.5231 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.969 x 10.52 at 8.794 degrees (North through East)
! Clean map  min=-0.001694  max=0.072682 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.286 mas, bmaj=10.17 mas, bpa=9.242 degrees
! Estimated noise=8.48993 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0554682 Jy
! Component: 100  -  total flux cleaned = 0.0680053 Jy
! Component: 150  -  total flux cleaned = 0.0721567 Jy
! Component: 200  -  total flux cleaned = 0.0733106 Jy
! Total flux subtracted in 200 components = 0.0733106 Jy
! Clean residual min=-0.003604 max=0.003521 Jy/beam
! Clean residual mean=0.000000 rms=0.000949 Jy/beam
! Combined flux in latest and established models = 0.0733106 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.0733106 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.969 mas, bmaj=10.52 mas, bpa=8.794 degrees
! Estimated noise=4.5231 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00163011 Jy
! Component: 100  -  total flux cleaned = 0.0021787 Jy
! Component: 150  -  total flux cleaned = 0.00228208 Jy
! Component: 200  -  total flux cleaned = 0.00232612 Jy
! Total flux subtracted in 200 components = 0.00232612 Jy
! Clean residual min=-0.001718 max=0.001586 Jy/beam
! Clean residual mean=0.000002 rms=0.000440 Jy/beam
! Combined flux in latest and established models = 0.0756368 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 53 components and 0.0756367 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.013 mas, bmaj=11.77 mas, bpa=6.924 degrees
! Estimated noise=5.77323 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000874405 Jy
! Component: 100  -  total flux cleaned = 0.000811502 Jy
! Component: 150  -  total flux cleaned = 0.000811138 Jy
! Component: 200  -  total flux cleaned = 0.000765841 Jy
! Total flux subtracted in 200 components = 0.000765841 Jy
! Clean residual min=-0.001658 max=0.001558 Jy/beam
! Clean residual mean=0.000005 rms=0.000464 Jy/beam
! Combined flux in latest and established models = 0.0764026 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.83418e-05 Jy
! Component: 100  -  total flux cleaned = -7.20617e-05 Jy
! Component: 150  -  total flux cleaned = -7.2054e-05 Jy
! Component: 200  -  total flux cleaned = -9.87822e-05 Jy
! Total flux subtracted in 200 components = -9.87822e-05 Jy
! Clean residual min=-0.001574 max=0.001530 Jy/beam
! Clean residual mean=0.000005 rms=0.000452 Jy/beam
! Combined flux in latest and established models = 0.0763038 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 91 components and 0.0763038 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.969 mas, bmaj=10.52 mas, bpa=8.794 degrees
! Estimated noise=4.5231 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.3166e-05 Jy
! Component: 100  -  total flux cleaned = 6.73225e-05 Jy
! Component: 150  -  total flux cleaned = 0.000189244 Jy
! Component: 200  -  total flux cleaned = 0.000246774 Jy
! Total flux subtracted in 200 components = 0.000246774 Jy
! Clean residual min=-0.001738 max=0.001673 Jy/beam
! Clean residual mean=0.000002 rms=0.000411 Jy/beam
! Combined flux in latest and established models = 0.0765506 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 109 components and 0.0765506 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052418Jy  sigma=0.097591
! Fit after  self-cal, rms=0.052410Jy  sigma=0.097567
wmodel /g0/scr/pima/npcsc_uvs/J0806+7746_S_map.mod
! Writing 109 model components to file: /g0/scr/pima/npcsc_uvs/J0806+7746_S_map.mod
wobs /g0/scr/pima/npcsc_uvs/J0806+7746_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J0806+7746_S_uvs.fits
wwins /g0/scr/pima/npcsc_uvs/J0806+7746_S_map.win
! wwins: Wrote 2 windows to /g0/scr/pima/npcsc_uvs/J0806+7746_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000178476 Jy
! Component: 100  -  total flux cleaned = -0.000348368 Jy
! Component: 150  -  total flux cleaned = -0.000402471 Jy
! Component: 200  -  total flux cleaned = -0.000326096 Jy
! Component: 250  -  total flux cleaned = -0.000252506 Jy
! Component: 300  -  total flux cleaned = -0.000205214 Jy
! Component: 350  -  total flux cleaned = -0.000159501 Jy
! Component: 400  -  total flux cleaned = -2.65199e-05 Jy
! Component: 450  -  total flux cleaned = 5.96129e-05 Jy
! Component: 500  -  total flux cleaned = 6.01328e-05 Jy
! Component: 550  -  total flux cleaned = 0.000122724 Jy
! Component: 600  -  total flux cleaned = 0.000143085 Jy
! Component: 650  -  total flux cleaned = 8.35882e-05 Jy
! Component: 700  -  total flux cleaned = 0.000122414 Jy
! Component: 750  -  total flux cleaned = 4.64362e-05 Jy
! Component: 800  -  total flux cleaned = 8.45159e-05 Jy
! Component: 850  -  total flux cleaned = 8.46737e-05 Jy
! Component: 900  -  total flux cleaned = 4.84548e-05 Jy
! Component: 950  -  total flux cleaned = -4.146e-05 Jy
! Component: 1000  -  total flux cleaned = -7.65909e-05 Jy
! Component: 1050  -  total flux cleaned = -0.000128862 Jy
! Component: 1100  -  total flux cleaned = -0.00012905 Jy
! Component: 1150  -  total flux cleaned = -0.000145956 Jy
! Component: 1200  -  total flux cleaned = -0.000129294 Jy
! Component: 1250  -  total flux cleaned = -0.000146187 Jy
! Component: 1300  -  total flux cleaned = -0.000129515 Jy
! Component: 1350  -  total flux cleaned = -9.6539e-05 Jy
! Component: 1400  -  total flux cleaned = -3.18356e-05 Jy
! Component: 1450  -  total flux cleaned = 1.58211e-05 Jy
! Component: 1500  -  total flux cleaned = 4.75727e-05 Jy
! Component: 1550  -  total flux cleaned = 7.88291e-05 Jy
! Component: 1600  -  total flux cleaned = 0.000125326 Jy
! Component: 1650  -  total flux cleaned = 0.000155915 Jy
! Component: 1700  -  total flux cleaned = 0.000156027 Jy
! Component: 1750  -  total flux cleaned = 0.000171175 Jy
! Component: 1800  -  total flux cleaned = 0.000200981 Jy
! Component: 1850  -  total flux cleaned = 0.000230508 Jy
! Component: 1900  -  total flux cleaned = 0.000186468 Jy
! Component: 1950  -  total flux cleaned = 0.000230117 Jy
! Component: 2000  -  total flux cleaned = 0.000230109 Jy
! Component: 2050  -  total flux cleaned = 0.000215788 Jy
! Component: 2100  -  total flux cleaned = 0.000159097 Jy
! Component: 2150  -  total flux cleaned = 0.000229467 Jy
! Component: 2200  -  total flux cleaned = 0.000201513 Jy
! Component: 2250  -  total flux cleaned = 0.000187574 Jy
! Component: 2300  -  total flux cleaned = 0.000173854 Jy
! Component: 2350  -  total flux cleaned = 0.000173959 Jy
! Component: 2400  -  total flux cleaned = 7.89681e-05 Jy
! Component: 2450  -  total flux cleaned = 0.000173356 Jy
! Component: 2500  -  total flux cleaned = 0.000146551 Jy
! Component: 2550  -  total flux cleaned = 0.00013324 Jy
! Component: 2600  -  total flux cleaned = 0.000133345 Jy
! Component: 2650  -  total flux cleaned = 0.000146498 Jy
! Component: 2700  -  total flux cleaned = 0.000120446 Jy
! Component: 2750  -  total flux cleaned = 6.85209e-05 Jy
! Component: 2800  -  total flux cleaned = 0.000107266 Jy
! Component: 2850  -  total flux cleaned = 0.000132876 Jy
! Component: 2900  -  total flux cleaned = 0.0001075 Jy
! Component: 2950  -  total flux cleaned = 0.000120141 Jy
! Component: 3000  -  total flux cleaned = 0.000132698 Jy
! Component: 3050  -  total flux cleaned = 0.00015757 Jy
! Component: 3100  -  total flux cleaned = 0.000194765 Jy
! Component: 3150  -  total flux cleaned = 0.000157816 Jy
! Component: 3200  -  total flux cleaned = 0.000182266 Jy
! Component: 3250  -  total flux cleaned = 0.000194291 Jy
! Component: 3300  -  total flux cleaned = 0.000169977 Jy
! Component: 3350  -  total flux cleaned = 0.000206052 Jy
! Component: 3400  -  total flux cleaned = 0.000241901 Jy
! Component: 3450  -  total flux cleaned = 0.000253919 Jy
! Component: 3500  -  total flux cleaned = 0.000313056 Jy
! Component: 3550  -  total flux cleaned = 0.000301288 Jy
! Component: 3600  -  total flux cleaned = 0.000383155 Jy
! Component: 3650  -  total flux cleaned = 0.00042964 Jy
! Component: 3700  -  total flux cleaned = 0.000406413 Jy
! Component: 3750  -  total flux cleaned = 0.000452383 Jy
! Component: 3800  -  total flux cleaned = 0.000498123 Jy
! Component: 3850  -  total flux cleaned = 0.000520877 Jy
! Component: 3900  -  total flux cleaned = 0.000543518 Jy
! Component: 3950  -  total flux cleaned = 0.00055482 Jy
! Component: 4000  -  total flux cleaned = 0.000610857 Jy
! Component: 4050  -  total flux cleaned = 0.000666516 Jy
! Total flux subtracted in 4096 components = 0.000644357 Jy
! Clean residual min=-0.000658 max=0.000733 Jy/beam
! Clean residual mean=0.000001 rms=0.000208 Jy/beam
! Combined flux in latest and established models = 0.0771949 Jy
keep
! Adding 305 model components to the UV plane model.
! The established model now contains 414 components and 0.0771949 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsc_uvs/J0806+7746_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.969 x 10.52 at 8.794 degrees (North through East)
! Clean map  min=-0.001435  max=0.072377 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J0806+7746_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0723768 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000208765 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.865327 0.865327 1.73065 3.46131 6.92262 13.8452 27.6905 55.3809
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0006 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.072 
quit
! Quitting program
! Log file /g0/scr/pima/npcsc_uvs/J0806+7746_S_uvs.log closed on Sun Oct  6 14:27:31 2013