! Started logfile: /g0/scr/pima/npcsc_uvs/J0802+7620_S_uvs.log on Sun Oct  6 14:27:20 2013
obs /g0/scr/pima/npcsc_uvs/J0802+7620_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J0802+7620_S_uva.fits
! AN table 1: 45 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.714286 visibilities/baseline/integration-bin.
! Found source: J0802+7620
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 3600 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J0802+7620_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005324Jy  sigma=0.900880
! Fit after  self-cal, rms=0.932528Jy  sigma=0.791133
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.065 mas, bmaj=21.51 mas, bpa=-15.16 degrees
! Estimated noise=24.8491 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.073564 Jy
! Component: 100  -  total flux cleaned = 0.0904963 Jy
! Total flux subtracted in 100 components = 0.0904963 Jy
! Clean residual min=-0.009621 max=0.008749 Jy/beam
! Clean residual mean=-0.000017 rms=0.002783 Jy/beam
! Combined flux in latest and established models = 0.0904962 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0904962 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089175Jy  sigma=0.085772
! Fit after  self-cal, rms=0.088112Jy  sigma=0.085070
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.325 mas, bmaj=22.56 mas, bpa=-15.88 degrees
! Estimated noise=15.1199 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0147055 Jy
! Component: 100  -  total flux cleaned = 0.0236859 Jy
! Component: 150  -  total flux cleaned = 0.0299626 Jy
! Component: 200  -  total flux cleaned = 0.0345009 Jy
! Total flux subtracted in 200 components = 0.0345009 Jy
! Clean residual min=-0.007610 max=0.006128 Jy/beam
! Clean residual mean=-0.000023 rms=0.002048 Jy/beam
! Combined flux in latest and established models = 0.124997 Jy
! Performing phase self-cal
! Adding 77 model components to the UV plane model.
! The established model now contains 85 components and 0.124997 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089074Jy  sigma=0.079749
! Fit after  self-cal, rms=0.088860Jy  sigma=0.079540
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.91     HN        0.81     KP        0.93     
!   LA        1.02     NL        0.89     OV        0.89     PT        0.94     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.93     HN        0.90     KP        0.95     
!   LA        0.97     NL        0.86     OV        0.91     PT        0.89     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.91     HN        0.92     KP        0.88     
!   LA        0.75     NL        1.00     OV        0.95     PT        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.93     HN        0.69     KP        0.95     
!   LA        0.63     NL        0.97     OV        0.81     PT        0.91     
! 
! 
! Fit before self-cal, rms=0.088860Jy  sigma=0.079540
! Fit after  self-cal, rms=0.077414Jy  sigma=0.074113
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.236 mas, bmaj=22.51 mas, bpa=-15.81 degrees
! Estimated noise=12.0272 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0143494 Jy
! Component: 100  -  total flux cleaned = -0.0164222 Jy
! Component: 150  -  total flux cleaned = -0.016122 Jy
! Component: 200  -  total flux cleaned = -0.0158458 Jy
! Total flux subtracted in 200 components = -0.0158458 Jy
! Clean residual min=-0.003897 max=0.004285 Jy/beam
! Clean residual mean=-0.000006 rms=0.001221 Jy/beam
! Combined flux in latest and established models = 0.109151 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 106 components and 0.109151 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069856Jy  sigma=0.076674
! Fit after  self-cal, rms=0.069921Jy  sigma=0.076511
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069921Jy  sigma=0.076511
! Fit after  self-cal, rms=0.063411Jy  sigma=0.073815
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.167 mas, bmaj=22.27 mas, bpa=-15.7 degrees
! Estimated noise=9.87877 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0115788 Jy
! Component: 100  -  total flux cleaned = -0.0141085 Jy
! Component: 150  -  total flux cleaned = -0.0141575 Jy
! Component: 200  -  total flux cleaned = -0.0141306 Jy
! Total flux subtracted in 200 components = -0.0141306 Jy
! Clean residual min=-0.003217 max=0.003589 Jy/beam
! Clean residual mean=-0.000005 rms=0.000968 Jy/beam
! Combined flux in latest and established models = 0.0950208 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 123 components and 0.0950208 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057366Jy  sigma=0.076453
! Fit after  self-cal, rms=0.057332Jy  sigma=0.076423
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000250426 Jy
! Component: 100  -  total flux cleaned = 0.000167305 Jy
! Component: 150  -  total flux cleaned = 0.000239013 Jy
! Component: 200  -  total flux cleaned = 0.000261246 Jy
! Total flux subtracted in 200 components = 0.000261246 Jy
! Clean residual min=-0.003135 max=0.003446 Jy/beam
! Clean residual mean=-0.000005 rms=0.000950 Jy/beam
! Combined flux in latest and established models = 0.0952821 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 142 components and 0.095282 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057245Jy  sigma=0.076472
! Fit after  self-cal, rms=0.057227Jy  sigma=0.076466
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057227Jy  sigma=0.076466
! Fit after  self-cal, rms=0.051881Jy  sigma=0.073743
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.114 mas, bmaj=22 mas, bpa=-15.53 degrees
! Estimated noise=8.11868 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00906309 Jy
! Component: 100  -  total flux cleaned = -0.0112738 Jy
! Component: 150  -  total flux cleaned = -0.0122773 Jy
! Component: 200  -  total flux cleaned = -0.0126432 Jy
! Total flux subtracted in 200 components = -0.0126432 Jy
! Clean residual min=-0.002589 max=0.002855 Jy/beam
! Clean residual mean=-0.000005 rms=0.000783 Jy/beam
! Combined flux in latest and established models = 0.0826389 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 155 components and 0.0826389 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047203Jy  sigma=0.076345
! Fit after  self-cal, rms=0.047199Jy  sigma=0.076334
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.67741e-05 Jy
! Component: 100  -  total flux cleaned = 1.42979e-05 Jy
! Component: 150  -  total flux cleaned = 1.39534e-05 Jy
! Component: 200  -  total flux cleaned = -4.7576e-07 Jy
! Total flux subtracted in 200 components = -4.7576e-07 Jy
! Clean residual min=-0.002572 max=0.002800 Jy/beam
! Clean residual mean=-0.000005 rms=0.000777 Jy/beam
! Combined flux in latest and established models = 0.0826384 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 170 components and 0.0826384 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047154Jy  sigma=0.076378
! Fit after  self-cal, rms=0.047150Jy  sigma=0.076376
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047150Jy  sigma=0.076376
! Fit after  self-cal, rms=0.042851Jy  sigma=0.073707
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.022 mas, bmaj=21.91 mas, bpa=-13.35 degrees
! Estimated noise=7.36425 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00756015 Jy
! Component: 100  -  total flux cleaned = -0.00948536 Jy
! Component: 150  -  total flux cleaned = -0.0104113 Jy
! Component: 200  -  total flux cleaned = -0.0109099 Jy
! Total flux subtracted in 200 components = -0.0109099 Jy
! Clean residual min=-0.002427 max=0.002697 Jy/beam
! Clean residual mean=-0.000005 rms=0.000791 Jy/beam
! Combined flux in latest and established models = 0.0717285 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 186 components and 0.0717284 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.039033Jy  sigma=0.076331
! Fit after  self-cal, rms=0.039022Jy  sigma=0.076315
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000151617 Jy
! Component: 100  -  total flux cleaned = -0.000140418 Jy
! Component: 150  -  total flux cleaned = -0.000140601 Jy
! Component: 200  -  total flux cleaned = -0.000140657 Jy
! Total flux subtracted in 200 components = -0.000140657 Jy
! Clean residual min=-0.002396 max=0.002605 Jy/beam
! Clean residual mean=-0.000005 rms=0.000786 Jy/beam
! Combined flux in latest and established models = 0.0715878 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 198 components and 0.0715878 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.038996Jy  sigma=0.076349
! Fit after  self-cal, rms=0.038996Jy  sigma=0.076347
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.074 mas, bmaj=21.71 mas, bpa=-15.29 degrees
! Estimated noise=6.67842 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.074 x 21.71 at -15.29 degrees (North through East)
! Clean map  min=-0.0020393  max=0.045345 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.899 mas, bmaj=21.05 mas, bpa=-14.45 degrees
! Estimated noise=10.4362 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.03074 Jy
! Component: 100  -  total flux cleaned = 0.0399103 Jy
! Component: 150  -  total flux cleaned = 0.0458991 Jy
! Component: 200  -  total flux cleaned = 0.050061 Jy
! Total flux subtracted in 200 components = 0.050061 Jy
! Clean residual min=-0.002994 max=0.003431 Jy/beam
! Clean residual mean=-0.000006 rms=0.000972 Jy/beam
! Combined flux in latest and established models = 0.050061 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.050061 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.074 mas, bmaj=21.71 mas, bpa=-15.29 degrees
! Estimated noise=6.67842 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00595351 Jy
! Component: 100  -  total flux cleaned = 0.00982728 Jy
! Component: 150  -  total flux cleaned = 0.012663 Jy
! Component: 200  -  total flux cleaned = 0.0147821 Jy
! Total flux subtracted in 200 components = 0.0147821 Jy
! Clean residual min=-0.002444 max=0.002706 Jy/beam
! Clean residual mean=-0.000007 rms=0.000795 Jy/beam
! Combined flux in latest and established models = 0.0648432 Jy
! Adding 76 model components to the UV plane model.
! The established model now contains 104 components and 0.0648432 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.022 mas, bmaj=21.91 mas, bpa=-13.35 degrees
! Estimated noise=7.36425 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00218283 Jy
! Component: 100  -  total flux cleaned = 0.00361601 Jy
! Component: 150  -  total flux cleaned = 0.00458689 Jy
! Component: 200  -  total flux cleaned = 0.00524682 Jy
! Total flux subtracted in 200 components = 0.00524682 Jy
! Clean residual min=-0.002510 max=0.002670 Jy/beam
! Clean residual mean=-0.000006 rms=0.000843 Jy/beam
! Combined flux in latest and established models = 0.07009 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00044963 Jy
! Component: 100  -  total flux cleaned = 0.000548179 Jy
! Component: 150  -  total flux cleaned = 0.000637088 Jy
! Component: 200  -  total flux cleaned = 0.000696032 Jy
! Total flux subtracted in 200 components = 0.000696032 Jy
! Clean residual min=-0.002487 max=0.002683 Jy/beam
! Clean residual mean=-0.000005 rms=0.000829 Jy/beam
! Combined flux in latest and established models = 0.070786 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 147 components and 0.070786 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.074 mas, bmaj=21.71 mas, bpa=-15.29 degrees
! Estimated noise=6.67842 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000206888 Jy
! Component: 100  -  total flux cleaned = -0.000204794 Jy
! Component: 150  -  total flux cleaned = -0.00018942 Jy
! Component: 200  -  total flux cleaned = -0.000162243 Jy
! Total flux subtracted in 200 components = -0.000162243 Jy
! Clean residual min=-0.002169 max=0.002314 Jy/beam
! Clean residual mean=-0.000004 rms=0.000666 Jy/beam
! Combined flux in latest and established models = 0.0706237 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 156 components and 0.0706238 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.038985Jy  sigma=0.076570
! Fit after  self-cal, rms=0.038974Jy  sigma=0.076539
wmodel /g0/scr/pima/npcsc_uvs/J0802+7620_S_map.mod
! Writing 156 model components to file: /g0/scr/pima/npcsc_uvs/J0802+7620_S_map.mod
wobs /g0/scr/pima/npcsc_uvs/J0802+7620_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J0802+7620_S_uvs.fits
wwins /g0/scr/pima/npcsc_uvs/J0802+7620_S_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsc_uvs/J0802+7620_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000589006 Jy
! Component: 100  -  total flux cleaned = 0.000789989 Jy
! Component: 150  -  total flux cleaned = 0.000882614 Jy
! Component: 200  -  total flux cleaned = 0.000883867 Jy
! Component: 250  -  total flux cleaned = 0.000963754 Jy
! Component: 300  -  total flux cleaned = 0.00106124 Jy
! Component: 350  -  total flux cleaned = 0.00122244 Jy
! Component: 400  -  total flux cleaned = 0.00128705 Jy
! Component: 450  -  total flux cleaned = 0.00141094 Jy
! Component: 500  -  total flux cleaned = 0.00143025 Jy
! Component: 550  -  total flux cleaned = 0.00144921 Jy
! Component: 600  -  total flux cleaned = 0.00143148 Jy
! Component: 650  -  total flux cleaned = 0.00144928 Jy
! Component: 700  -  total flux cleaned = 0.00149985 Jy
! Component: 750  -  total flux cleaned = 0.00153209 Jy
! Component: 800  -  total flux cleaned = 0.00162696 Jy
! Component: 850  -  total flux cleaned = 0.00170385 Jy
! Component: 900  -  total flux cleaned = 0.00180875 Jy
! Component: 950  -  total flux cleaned = 0.00191109 Jy
! Component: 1000  -  total flux cleaned = 0.00199713 Jy
! Component: 1050  -  total flux cleaned = 0.00203943 Jy
! Component: 1100  -  total flux cleaned = 0.00212175 Jy
! Component: 1150  -  total flux cleaned = 0.00214809 Jy
! Component: 1200  -  total flux cleaned = 0.00217419 Jy
! Component: 1250  -  total flux cleaned = 0.0021996 Jy
! Component: 1300  -  total flux cleaned = 0.00223728 Jy
! Component: 1350  -  total flux cleaned = 0.00224956 Jy
! Component: 1400  -  total flux cleaned = 0.00226183 Jy
! Component: 1450  -  total flux cleaned = 0.00226198 Jy
! Component: 1500  -  total flux cleaned = 0.00229727 Jy
! Component: 1550  -  total flux cleaned = 0.00230872 Jy
! Component: 1600  -  total flux cleaned = 0.00232006 Jy
! Component: 1650  -  total flux cleaned = 0.00234253 Jy
! Component: 1700  -  total flux cleaned = 0.00235363 Jy
! Component: 1750  -  total flux cleaned = 0.00237558 Jy
! Component: 1800  -  total flux cleaned = 0.00240789 Jy
! Component: 1850  -  total flux cleaned = 0.00245058 Jy
! Component: 1900  -  total flux cleaned = 0.00246108 Jy
! Component: 1950  -  total flux cleaned = 0.00249267 Jy
! Component: 2000  -  total flux cleaned = 0.00252396 Jy
! Component: 2050  -  total flux cleaned = 0.00254479 Jy
! Component: 2100  -  total flux cleaned = 0.00261666 Jy
! Component: 2150  -  total flux cleaned = 0.00267767 Jy
! Component: 2200  -  total flux cleaned = 0.00270792 Jy
! Component: 2250  -  total flux cleaned = 0.00273807 Jy
! Component: 2300  -  total flux cleaned = 0.00276801 Jy
! Component: 2350  -  total flux cleaned = 0.00280758 Jy
! Component: 2400  -  total flux cleaned = 0.00282726 Jy
! Component: 2450  -  total flux cleaned = 0.00284678 Jy
! Component: 2500  -  total flux cleaned = 0.00286629 Jy
! Component: 2550  -  total flux cleaned = 0.00288572 Jy
! Component: 2600  -  total flux cleaned = 0.00292435 Jy
! Component: 2650  -  total flux cleaned = 0.00296281 Jy
! Component: 2700  -  total flux cleaned = 0.00298203 Jy
! Component: 2750  -  total flux cleaned = 0.00301068 Jy
! Component: 2800  -  total flux cleaned = 0.00304869 Jy
! Component: 2850  -  total flux cleaned = 0.0030582 Jy
! Component: 2900  -  total flux cleaned = 0.0030582 Jy
! Component: 2950  -  total flux cleaned = 0.00305818 Jy
! Component: 3000  -  total flux cleaned = 0.00308628 Jy
! Component: 3050  -  total flux cleaned = 0.00304887 Jy
! Component: 3100  -  total flux cleaned = 0.00301156 Jy
! Component: 3150  -  total flux cleaned = 0.00297435 Jy
! Component: 3200  -  total flux cleaned = 0.00295577 Jy
! Component: 3250  -  total flux cleaned = 0.00293717 Jy
! Component: 3300  -  total flux cleaned = 0.00290941 Jy
! Component: 3350  -  total flux cleaned = 0.00289088 Jy
! Component: 3400  -  total flux cleaned = 0.00283554 Jy
! Component: 3450  -  total flux cleaned = 0.00281714 Jy
! Component: 3500  -  total flux cleaned = 0.00279873 Jy
! Component: 3550  -  total flux cleaned = 0.00275274 Jy
! Component: 3600  -  total flux cleaned = 0.00270683 Jy
! Component: 3650  -  total flux cleaned = 0.00269762 Jy
! Component: 3700  -  total flux cleaned = 0.00267929 Jy
! Component: 3750  -  total flux cleaned = 0.00268848 Jy
! Component: 3800  -  total flux cleaned = 0.00263336 Jy
! Component: 3850  -  total flux cleaned = 0.00263336 Jy
! Component: 3900  -  total flux cleaned = 0.00263336 Jy
! Component: 3950  -  total flux cleaned = 0.00262413 Jy
! Component: 4000  -  total flux cleaned = 0.00265172 Jy
! Component: 4050  -  total flux cleaned = 0.0026333 Jy
! Total flux subtracted in 4096 components = 0.00263331 Jy
! Clean residual min=-0.000511 max=0.000510 Jy/beam
! Clean residual mean=0.000003 rms=0.000178 Jy/beam
! Combined flux in latest and established models = 0.0732571 Jy
keep
! Adding 322 model components to the UV plane model.
! The established model now contains 478 components and 0.073257 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsc_uvs/J0802+7620_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.074 x 21.71 at -15.29 degrees (North through East)
! Clean map  min=-0.0011838  max=0.043898 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J0802+7620_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0438975 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000170597 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.16587 1.16587 2.33175 4.6635 9.32699 18.654 37.308 74.616
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0005 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.043 
quit
! Quitting program
! Log file /g0/scr/pima/npcsc_uvs/J0802+7620_S_uvs.log closed on Sun Oct  6 14:27:25 2013