! Started logfile: /g0/scr/pima/npcsc_uvs/J0629+8451_S_uvs.log on Sun Oct  6 14:27:01 2013
obs /g0/scr/pima/npcsc_uvs/J0629+8451_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J0629+8451_S_uva.fits
! AN table 1: 45 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.666667 visibilities/baseline/integration-bin.
! Found source: J0629+8451
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1800 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J0629+8451_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002813Jy  sigma=0.868470
! Fit after  self-cal, rms=0.925772Jy  sigma=0.764151
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=15.23 mas, bmaj=47.06 mas, bpa=21.67 degrees
! Estimated noise=43.1461 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.073552 Jy
! Component: 100  -  total flux cleaned = 0.078004 Jy
! Total flux subtracted in 100 components = 0.078004 Jy
! Clean residual min=-0.015289 max=0.015137 Jy/beam
! Clean residual mean=-0.000077 rms=0.006552 Jy/beam
! Combined flux in latest and established models = 0.078004 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 45 components and 0.078004 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088603Jy  sigma=0.090491
! Fit after  self-cal, rms=0.087075Jy  sigma=0.089531
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=15.75 mas, bmaj=44.08 mas, bpa=19.75 degrees
! Estimated noise=22.5454 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0209801 Jy
! Component: 100  -  total flux cleaned = 0.0261318 Jy
! Component: 150  -  total flux cleaned = 0.025875 Jy
! Component: 200  -  total flux cleaned = 0.0244463 Jy
! Total flux subtracted in 200 components = 0.0244463 Jy
! Clean residual min=-0.004200 max=0.004235 Jy/beam
! Clean residual mean=-0.000013 rms=0.001950 Jy/beam
! Combined flux in latest and established models = 0.10245 Jy
! Performing phase self-cal
! Adding 91 model components to the UV plane model.
! The established model now contains 136 components and 0.10245 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088104Jy  sigma=0.077966
! Fit after  self-cal, rms=0.087626Jy  sigma=0.077806
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.89     KP        0.85     LA        1.00     
!   OV        0.89     PT        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.90     KP        0.90     LA        1.03     
!   OV        0.84     PT        0.85     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.05     KP        0.96     LA        0.79     
!   OV        1.07     PT        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.95     KP        0.91     LA        0.70     
!   OV        0.77     PT        0.91     
! 
! 
! Fit before self-cal, rms=0.087626Jy  sigma=0.077806
! Fit after  self-cal, rms=0.077923Jy  sigma=0.071010
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=15.55 mas, bmaj=43.73 mas, bpa=19.57 degrees
! Estimated noise=18.2911 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0147366 Jy
! Component: 100  -  total flux cleaned = -0.017429 Jy
! Component: 150  -  total flux cleaned = -0.0183176 Jy
! Component: 200  -  total flux cleaned = -0.0189145 Jy
! Total flux subtracted in 200 components = -0.0189145 Jy
! Clean residual min=-0.001554 max=0.001543 Jy/beam
! Clean residual mean=-0.000003 rms=0.000571 Jy/beam
! Combined flux in latest and established models = 0.0835358 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 186 components and 0.0835358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069791Jy  sigma=0.073589
! Fit after  self-cal, rms=0.069674Jy  sigma=0.073393
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069674Jy  sigma=0.073393
! Fit after  self-cal, rms=0.064218Jy  sigma=0.070612
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=15.29 mas, bmaj=43.7 mas, bpa=19.88 degrees
! Estimated noise=15.2324 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0118264 Jy
! Component: 100  -  total flux cleaned = -0.013721 Jy
! Component: 150  -  total flux cleaned = -0.014246 Jy
! Component: 200  -  total flux cleaned = -0.014024 Jy
! Total flux subtracted in 200 components = -0.014024 Jy
! Clean residual min=-0.001136 max=0.001134 Jy/beam
! Clean residual mean=-0.000006 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.0695118 Jy
selfcal
! Performing phase self-cal
! Adding 64 model components to the UV plane model.
! The established model now contains 241 components and 0.0695118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057922Jy  sigma=0.073208
! Fit after  self-cal, rms=0.057863Jy  sigma=0.073168
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000942356 Jy
! Component: 100  -  total flux cleaned = 0.000940613 Jy
! Component: 150  -  total flux cleaned = 0.00141676 Jy
! Component: 200  -  total flux cleaned = 0.00164123 Jy
! Total flux subtracted in 200 components = 0.00164123 Jy
! Clean residual min=-0.000708 max=0.000722 Jy/beam
! Clean residual mean=-0.000006 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.071153 Jy
! Performing phase self-cal
! Adding 76 model components to the UV plane model.
! The established model now contains 316 components and 0.071153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057660Jy  sigma=0.073204
! Fit after  self-cal, rms=0.057642Jy  sigma=0.073184
! Inverting map 
! Added new window around map position (-21, 121.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000238334 Jy
! Component: 100  -  total flux cleaned = 6.25624e-05 Jy
! Component: 150  -  total flux cleaned = -1.4136e-07 Jy
! Component: 200  -  total flux cleaned = -6.56081e-05 Jy
! Total flux subtracted in 200 components = -6.56081e-05 Jy
! Clean residual min=-0.001076 max=0.001073 Jy/beam
! Clean residual mean=-0.000008 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.0710874 Jy
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 375 components and 0.0710874 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057573Jy  sigma=0.073219
! Fit after  self-cal, rms=0.057568Jy  sigma=0.073205
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057568Jy  sigma=0.073205
! Fit after  self-cal, rms=0.052968Jy  sigma=0.070318
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=15.03 mas, bmaj=43.68 mas, bpa=20.18 degrees
! Estimated noise=12.6102 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00891237 Jy
! Component: 100  -  total flux cleaned = -0.01029 Jy
! Component: 150  -  total flux cleaned = -0.0101181 Jy
! Component: 200  -  total flux cleaned = -0.0100687 Jy
! Total flux subtracted in 200 components = -0.0100687 Jy
! Clean residual min=-0.004095 max=0.004753 Jy/beam
! Clean residual mean=-0.000002 rms=0.001135 Jy/beam
! Combined flux in latest and established models = 0.0610186 Jy
selfcal
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 423 components and 0.0610186 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048849Jy  sigma=0.072434
! Fit after  self-cal, rms=0.048727Jy  sigma=0.072157
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00154682 Jy
! Component: 100  -  total flux cleaned = -0.00129518 Jy
! Component: 150  -  total flux cleaned = -0.00135517 Jy
! Component: 200  -  total flux cleaned = -0.00133701 Jy
! Total flux subtracted in 200 components = -0.00133701 Jy
! Clean residual min=-0.001472 max=0.001284 Jy/beam
! Clean residual mean=-0.000007 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.0596816 Jy
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 474 components and 0.0596816 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048156Jy  sigma=0.072805
! Fit after  self-cal, rms=0.048135Jy  sigma=0.072783
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048135Jy  sigma=0.072783
! Fit after  self-cal, rms=0.044742Jy  sigma=0.070272
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=15.26 mas, bmaj=43.27 mas, bpa=20.5 degrees
! Estimated noise=10.6 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00713566 Jy
! Component: 100  -  total flux cleaned = -0.00785154 Jy
! Component: 150  -  total flux cleaned = -0.00821923 Jy
! Component: 200  -  total flux cleaned = -0.0084259 Jy
! Total flux subtracted in 200 components = -0.0084259 Jy
! Clean residual min=-0.003657 max=0.003855 Jy/beam
! Clean residual mean=-0.000001 rms=0.001040 Jy/beam
! Combined flux in latest and established models = 0.0512557 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 490 components and 0.0512557 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.041555Jy  sigma=0.072198
! Fit after  self-cal, rms=0.041446Jy  sigma=0.071881
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00169661 Jy
! Component: 100  -  total flux cleaned = -0.00204963 Jy
! Component: 150  -  total flux cleaned = -0.00192578 Jy
! Component: 200  -  total flux cleaned = -0.00175793 Jy
! Total flux subtracted in 200 components = -0.00175793 Jy
! Clean residual min=-0.001316 max=0.001356 Jy/beam
! Clean residual mean=-0.000006 rms=0.000422 Jy/beam
! Combined flux in latest and established models = 0.0494978 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 528 components and 0.0494978 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.040901Jy  sigma=0.072618
! Fit after  self-cal, rms=0.040880Jy  sigma=0.072592
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=14.78 mas, bmaj=43.74 mas, bpa=20.47 degrees
! Estimated noise=10.5732 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 14.78 x 43.74 at 20.47 degrees (North through East)
! Clean map  min=-0.0077963  max=0.045436 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=14.4 mas, bmaj=47.11 mas, bpa=21.92 degrees
! Estimated noise=20.045 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0329676 Jy
! Component: 100  -  total flux cleaned = 0.0363313 Jy
! Component: 150  -  total flux cleaned = 0.0343989 Jy
! Component: 200  -  total flux cleaned = 0.0335434 Jy
! Total flux subtracted in 200 components = 0.0335434 Jy
! Clean residual min=-0.015783 max=0.015659 Jy/beam
! Clean residual mean=-0.000045 rms=0.004889 Jy/beam
! Combined flux in latest and established models = 0.0335434 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 50 model components to the UV plane model.
! The established model now contains 50 components and 0.0335434 Jy
! Inverting map and beam 
! Estimated beam: bmin=14.78 mas, bmaj=43.74 mas, bpa=20.47 degrees
! Estimated noise=10.5732 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00292396 Jy
! Component: 100  -  total flux cleaned = 0.00391434 Jy
! Component: 150  -  total flux cleaned = 0.00341669 Jy
! Component: 200  -  total flux cleaned = 0.00245475 Jy
! Total flux subtracted in 200 components = 0.00245475 Jy
! Clean residual min=-0.011605 max=0.013105 Jy/beam
! Clean residual mean=-0.000057 rms=0.004438 Jy/beam
! Combined flux in latest and established models = 0.0359981 Jy
! Adding 73 model components to the UV plane model.
! The established model now contains 117 components and 0.0359982 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=15.26 mas, bmaj=43.27 mas, bpa=20.5 degrees
! Estimated noise=10.6 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00181944 Jy
! Component: 100  -  total flux cleaned = -0.00275199 Jy
! Component: 150  -  total flux cleaned = -0.00384882 Jy
! Component: 200  -  total flux cleaned = -0.00442457 Jy
! Total flux subtracted in 200 components = -0.00442457 Jy
! Clean residual min=-0.010997 max=0.011837 Jy/beam
! Clean residual mean=-0.000050 rms=0.004180 Jy/beam
! Combined flux in latest and established models = 0.0315736 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000548895 Jy
! Component: 100  -  total flux cleaned = -0.00107406 Jy
! Component: 150  -  total flux cleaned = -0.00147974 Jy
! Component: 200  -  total flux cleaned = -0.00187657 Jy
! Total flux subtracted in 200 components = -0.00187657 Jy
! Clean residual min=-0.010126 max=0.011392 Jy/beam
! Clean residual mean=-0.000051 rms=0.003930 Jy/beam
! Combined flux in latest and established models = 0.029697 Jy
! Adding 75 model components to the UV plane model.
! The established model now contains 174 components and 0.029697 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=14.78 mas, bmaj=43.74 mas, bpa=20.47 degrees
! Estimated noise=10.5732 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000399471 Jy
! Component: 100  -  total flux cleaned = 2.44701e-05 Jy
! Component: 150  -  total flux cleaned = -0.000433447 Jy
! Component: 200  -  total flux cleaned = -0.000887914 Jy
! Total flux subtracted in 200 components = -0.000887914 Jy
! Clean residual min=-0.009098 max=0.011025 Jy/beam
! Clean residual mean=-0.000040 rms=0.003619 Jy/beam
! Combined flux in latest and established models = 0.0288091 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 192 components and 0.0288091 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.041890Jy  sigma=0.086232
! Fit after  self-cal, rms=0.039762Jy  sigma=0.078728
wmodel /g0/scr/pima/npcsc_uvs/J0629+8451_S_map.mod
! Writing 192 model components to file: /g0/scr/pima/npcsc_uvs/J0629+8451_S_map.mod
wobs /g0/scr/pima/npcsc_uvs/J0629+8451_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J0629+8451_S_uvs.fits
wwins /g0/scr/pima/npcsc_uvs/J0629+8451_S_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsc_uvs/J0629+8451_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.0022948 Jy
! Component: 100  -  total flux cleaned = 0.00398483 Jy
! Component: 150  -  total flux cleaned = 0.00496259 Jy
! Component: 200  -  total flux cleaned = 0.00530854 Jy
! Component: 250  -  total flux cleaned = 0.0054855 Jy
! Component: 300  -  total flux cleaned = 0.00532852 Jy
! Component: 350  -  total flux cleaned = 0.00521996 Jy
! Component: 400  -  total flux cleaned = 0.00508552 Jy
! Component: 450  -  total flux cleaned = 0.00499174 Jy
! Component: 500  -  total flux cleaned = 0.00498973 Jy
! Component: 550  -  total flux cleaned = 0.00498967 Jy
! Component: 600  -  total flux cleaned = 0.00486095 Jy
! Component: 650  -  total flux cleaned = 0.00468903 Jy
! Component: 700  -  total flux cleaned = 0.00459531 Jy
! Component: 750  -  total flux cleaned = 0.00450511 Jy
! Component: 800  -  total flux cleaned = 0.00439606 Jy
! Component: 850  -  total flux cleaned = 0.00431209 Jy
! Component: 900  -  total flux cleaned = 0.00423054 Jy
! Component: 950  -  total flux cleaned = 0.00421071 Jy
! Component: 1000  -  total flux cleaned = 0.0043467 Jy
! Component: 1050  -  total flux cleaned = 0.00448011 Jy
! Component: 1100  -  total flux cleaned = 0.00461084 Jy
! Component: 1150  -  total flux cleaned = 0.00472114 Jy
! Component: 1200  -  total flux cleaned = 0.00482989 Jy
! Component: 1250  -  total flux cleaned = 0.00495536 Jy
! Component: 1300  -  total flux cleaned = 0.00509685 Jy
! Component: 1350  -  total flux cleaned = 0.00523613 Jy
! Component: 1400  -  total flux cleaned = 0.00530503 Jy
! Component: 1450  -  total flux cleaned = 0.0053737 Jy
! Component: 1500  -  total flux cleaned = 0.00542484 Jy
! Component: 1550  -  total flux cleaned = 0.00544205 Jy
! Component: 1600  -  total flux cleaned = 0.00547607 Jy
! Component: 1650  -  total flux cleaned = 0.0054588 Jy
! Component: 1700  -  total flux cleaned = 0.00545905 Jy
! Component: 1750  -  total flux cleaned = 0.00547628 Jy
! Component: 1800  -  total flux cleaned = 0.00554658 Jy
! Component: 1850  -  total flux cleaned = 0.0055997 Jy
! Component: 1900  -  total flux cleaned = 0.00567151 Jy
! Component: 1950  -  total flux cleaned = 0.00572635 Jy
! Component: 2000  -  total flux cleaned = 0.00579991 Jy
! Component: 2050  -  total flux cleaned = 0.00587484 Jy
! Component: 2100  -  total flux cleaned = 0.00595074 Jy
! Component: 2150  -  total flux cleaned = 0.00602794 Jy
! Component: 2200  -  total flux cleaned = 0.00610646 Jy
! Component: 2250  -  total flux cleaned = 0.00618612 Jy
! Component: 2300  -  total flux cleaned = 0.00626703 Jy
! Component: 2350  -  total flux cleaned = 0.0063493 Jy
! Component: 2400  -  total flux cleaned = 0.006433 Jy
! Component: 2450  -  total flux cleaned = 0.00651807 Jy
! Component: 2500  -  total flux cleaned = 0.00656162 Jy
! Component: 2550  -  total flux cleaned = 0.00660559 Jy
! Component: 2600  -  total flux cleaned = 0.00667294 Jy
! Component: 2650  -  total flux cleaned = 0.00674132 Jy
! Component: 2700  -  total flux cleaned = 0.00681112 Jy
! Component: 2750  -  total flux cleaned = 0.00688277 Jy
! Component: 2800  -  total flux cleaned = 0.00693122 Jy
! Component: 2850  -  total flux cleaned = 0.00698027 Jy
! Component: 2900  -  total flux cleaned = 0.00708031 Jy
! Component: 2950  -  total flux cleaned = 0.00715709 Jy
! Component: 3000  -  total flux cleaned = 0.00723496 Jy
! Component: 3050  -  total flux cleaned = 0.0073142 Jy
! Component: 3100  -  total flux cleaned = 0.00736834 Jy
! Component: 3150  -  total flux cleaned = 0.00747802 Jy
! Component: 3200  -  total flux cleaned = 0.007534 Jy
! Component: 3250  -  total flux cleaned = 0.0076478 Jy
! Component: 3300  -  total flux cleaned = 0.00770584 Jy
! Component: 3350  -  total flux cleaned = 0.00779457 Jy
! Component: 3400  -  total flux cleaned = 0.00788459 Jy
! Component: 3450  -  total flux cleaned = 0.00797618 Jy
! Component: 3500  -  total flux cleaned = 0.00810135 Jy
! Component: 3550  -  total flux cleaned = 0.00816485 Jy
! Component: 3600  -  total flux cleaned = 0.00826217 Jy
! Component: 3650  -  total flux cleaned = 0.0083612 Jy
! Component: 3700  -  total flux cleaned = 0.00849593 Jy
! Component: 3750  -  total flux cleaned = 0.00856447 Jy
! Component: 3800  -  total flux cleaned = 0.00866949 Jy
! Component: 3850  -  total flux cleaned = 0.00870512 Jy
! Component: 3900  -  total flux cleaned = 0.00877765 Jy
! Component: 3950  -  total flux cleaned = 0.00881461 Jy
! Component: 4000  -  total flux cleaned = 0.00885183 Jy
! Component: 4050  -  total flux cleaned = 0.00892898 Jy
! Total flux subtracted in 4096 components = 0.00896822 Jy
! Clean residual min=-0.002242 max=0.002070 Jy/beam
! Clean residual mean=0.000052 rms=0.000799 Jy/beam
! Combined flux in latest and established models = 0.0377773 Jy
keep
! Adding 357 model components to the UV plane model.
! The established model now contains 549 components and 0.0377773 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsc_uvs/J0629+8451_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 14.78 x 43.74 at 20.47 degrees (North through East)
! Clean map  min=-0.019399  max=0.032153 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J0629+8451_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0321531 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000857337 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -7.99927 7.99927 15.9985 31.9971 63.9942
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0025 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.032 
quit
! Quitting program
! Log file /g0/scr/pima/npcsc_uvs/J0629+8451_S_uvs.log closed on Sun Oct  6 14:27:07 2013