! Started logfile: /g0/scr/pima/npcsc_uvs/J0543+8238_S_uvs.log on Sun Oct  6 14:26:49 2013
obs /g0/scr/pima/npcsc_uvs/J0543+8238_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J0543+8238_S_uva.fits
! AN table 1: 46 integrations on 45 of 45 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0543+8238
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 8280 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J0543+8238_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.049313Jy  sigma=1.808748
! Fit after  self-cal, rms=0.787597Jy  sigma=1.233260
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.341 mas, bmaj=10.47 mas, bpa=4.003 degrees
! Estimated noise=11.1958 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.181293 Jy
! Component: 100  -  total flux cleaned = 0.232068 Jy
! Total flux subtracted in 100 components = 0.232068 Jy
! Clean residual min=-0.018668 max=0.023110 Jy/beam
! Clean residual mean=-0.000004 rms=0.004518 Jy/beam
! Combined flux in latest and established models = 0.232068 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.232068 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.130222Jy  sigma=0.241508
! Fit after  self-cal, rms=0.130239Jy  sigma=0.241458
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.237 mas, bmaj=11.21 mas, bpa=4.293 degrees
! Estimated noise=4.96315 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0357612 Jy
! Component: 100  -  total flux cleaned = 0.0472459 Jy
! Component: 150  -  total flux cleaned = 0.0464874 Jy
! Component: 200  -  total flux cleaned = 0.0470951 Jy
! Total flux subtracted in 200 components = 0.0470951 Jy
! Clean residual min=-0.017614 max=0.013407 Jy/beam
! Clean residual mean=0.000006 rms=0.003827 Jy/beam
! Combined flux in latest and established models = 0.279163 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 23 components and 0.279163 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.127233Jy  sigma=0.217538
! Fit after  self-cal, rms=0.127235Jy  sigma=0.217456
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.91     HN        0.95     KP        0.99     
!   LA        1.07     MK        0.94     NL        1.03     OV        1.04     
!   PT        1.01     SC        0.94     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        0.98     HN        1.01     KP        0.99     
!   LA        1.02     MK        0.98     NL        1.03     OV        1.05     
!   PT        0.96     SC        0.91     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.46     FD        1.09     HN        0.94     KP        1.00     
!   LA        0.86     MK        1.13     NL        1.10     OV        1.04     
!   PT        1.11     SC        0.95     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.07     HN        0.91     KP        0.94     
!   LA        0.72     MK        1.09     NL        1.09     OV        0.87     
!   PT        0.92     SC        1.08     
! 
! 
! Fit before self-cal, rms=0.127235Jy  sigma=0.217456
! Fit after  self-cal, rms=0.104935Jy  sigma=0.167915
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.277 mas, bmaj=11.07 mas, bpa=4.349 degrees
! Estimated noise=4.59943 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0084427 Jy
! Component: 100  -  total flux cleaned = -0.008866 Jy
! Component: 150  -  total flux cleaned = -0.00842224 Jy
! Component: 200  -  total flux cleaned = -0.00769419 Jy
! Total flux subtracted in 200 components = -0.00769419 Jy
! Clean residual min=-0.005092 max=0.007826 Jy/beam
! Clean residual mean=-0.000003 rms=0.001542 Jy/beam
! Combined flux in latest and established models = 0.271469 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 44 components and 0.271469 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100266Jy  sigma=0.169540
! Fit after  self-cal, rms=0.100821Jy  sigma=0.168714
! Inverting map 
! Added new window around map position (-13.5, -35).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0076247 Jy
! Component: 100  -  total flux cleaned = 0.00922378 Jy
! Component: 150  -  total flux cleaned = 0.0103777 Jy
! Component: 200  -  total flux cleaned = 0.0115865 Jy
! Total flux subtracted in 200 components = 0.0115865 Jy
! Clean residual min=-0.004766 max=0.004367 Jy/beam
! Clean residual mean=0.000001 rms=0.001189 Jy/beam
! Combined flux in latest and established models = 0.283056 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 73 components and 0.283056 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099995Jy  sigma=0.167751
! Fit after  self-cal, rms=0.099948Jy  sigma=0.167662
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099948Jy  sigma=0.167662
! Fit after  self-cal, rms=0.097515Jy  sigma=0.164676
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.267 mas, bmaj=11.02 mas, bpa=4.329 degrees
! Estimated noise=4.32094 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0111822 Jy
! Component: 100  -  total flux cleaned = -0.0111141 Jy
! Component: 150  -  total flux cleaned = -0.00963121 Jy
! Component: 200  -  total flux cleaned = -0.00886512 Jy
! Total flux subtracted in 200 components = -0.00886512 Jy
! Clean residual min=-0.004049 max=0.003949 Jy/beam
! Clean residual mean=0.000001 rms=0.001049 Jy/beam
! Combined flux in latest and established models = 0.274191 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 95 components and 0.274191 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093720Jy  sigma=0.166637
! Fit after  self-cal, rms=0.093746Jy  sigma=0.166628
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000616056 Jy
! Component: 100  -  total flux cleaned = 0.00109046 Jy
! Component: 150  -  total flux cleaned = 0.00159251 Jy
! Component: 200  -  total flux cleaned = 0.0019206 Jy
! Total flux subtracted in 200 components = 0.0019206 Jy
! Clean residual min=-0.003955 max=0.003650 Jy/beam
! Clean residual mean=0.000001 rms=0.000993 Jy/beam
! Combined flux in latest and established models = 0.276111 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 127 components and 0.276111 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093539Jy  sigma=0.166622
! Fit after  self-cal, rms=0.093533Jy  sigma=0.166613
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093533Jy  sigma=0.166613
! Fit after  self-cal, rms=0.091535Jy  sigma=0.164158
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.258 mas, bmaj=10.99 mas, bpa=4.32 degrees
! Estimated noise=4.07539 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0103995 Jy
! Component: 100  -  total flux cleaned = -0.0117583 Jy
! Component: 150  -  total flux cleaned = -0.0116681 Jy
! Component: 200  -  total flux cleaned = -0.0112296 Jy
! Total flux subtracted in 200 components = -0.0112296 Jy
! Clean residual min=-0.003552 max=0.003388 Jy/beam
! Clean residual mean=0.000001 rms=0.000914 Jy/beam
! Combined flux in latest and established models = 0.264882 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 133 components and 0.264882 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088087Jy  sigma=0.166325
! Fit after  self-cal, rms=0.088098Jy  sigma=0.166319
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000174442 Jy
! Component: 100  -  total flux cleaned = 0.000340409 Jy
! Component: 150  -  total flux cleaned = 0.000497097 Jy
! Component: 200  -  total flux cleaned = 0.000689981 Jy
! Total flux subtracted in 200 components = 0.000689981 Jy
! Clean residual min=-0.003480 max=0.003348 Jy/beam
! Clean residual mean=0.000001 rms=0.000883 Jy/beam
! Combined flux in latest and established models = 0.265572 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 149 components and 0.265572 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087960Jy  sigma=0.166349
! Fit after  self-cal, rms=0.087960Jy  sigma=0.166345
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087960Jy  sigma=0.166345
! Fit after  self-cal, rms=0.086104Jy  sigma=0.163932
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.569 mas, bmaj=12.39 mas, bpa=6.946 degrees
! Estimated noise=4.3814 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00997513 Jy
! Component: 100  -  total flux cleaned = -0.0118956 Jy
! Component: 150  -  total flux cleaned = -0.0117563 Jy
! Component: 200  -  total flux cleaned = -0.0115074 Jy
! Total flux subtracted in 200 components = -0.0115074 Jy
! Clean residual min=-0.003117 max=0.003551 Jy/beam
! Clean residual mean=0.000002 rms=0.000962 Jy/beam
! Combined flux in latest and established models = 0.254064 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 155 components and 0.254064 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082727Jy  sigma=0.166282
! Fit after  self-cal, rms=0.082740Jy  sigma=0.166268
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000148377 Jy
! Component: 100  -  total flux cleaned = 0.000254205 Jy
! Component: 150  -  total flux cleaned = 0.000255818 Jy
! Component: 200  -  total flux cleaned = 0.000256057 Jy
! Total flux subtracted in 200 components = 0.000256057 Jy
! Clean residual min=-0.003038 max=0.003224 Jy/beam
! Clean residual mean=0.000002 rms=0.000917 Jy/beam
! Combined flux in latest and established models = 0.25432 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 162 components and 0.25432 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082626Jy  sigma=0.166409
! Fit after  self-cal, rms=0.082623Jy  sigma=0.166398
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.25 mas, bmaj=10.98 mas, bpa=4.318 degrees
! Estimated noise=3.84403 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.25 x 10.98 at 4.318 degrees (North through East)
! Clean map  min=-0.0056899  max=0.19755 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.363 mas, bmaj=10.35 mas, bpa=3.892 degrees
! Estimated noise=8.66104 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.139876 Jy
! Component: 100  -  total flux cleaned = 0.180008 Jy
! Component: 150  -  total flux cleaned = 0.200051 Jy
! Component: 200  -  total flux cleaned = 0.210704 Jy
! Total flux subtracted in 200 components = 0.210704 Jy
! Clean residual min=-0.006508 max=0.007886 Jy/beam
! Clean residual mean=-0.000004 rms=0.001745 Jy/beam
! Combined flux in latest and established models = 0.210704 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.210704 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.25 mas, bmaj=10.98 mas, bpa=4.318 degrees
! Estimated noise=3.84403 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0125411 Jy
! Component: 100  -  total flux cleaned = 0.0199972 Jy
! Component: 150  -  total flux cleaned = 0.0254146 Jy
! Component: 200  -  total flux cleaned = 0.0279306 Jy
! Total flux subtracted in 200 components = 0.0279306 Jy
! Clean residual min=-0.004084 max=0.006266 Jy/beam
! Clean residual mean=-0.000001 rms=0.001212 Jy/beam
! Combined flux in latest and established models = 0.238635 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 62 components and 0.238635 Jy
! Inverting map 
! Added new window around map position (-3.5, -20.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00571225 Jy
! Component: 100  -  total flux cleaned = 0.00771771 Jy
! Component: 150  -  total flux cleaned = 0.00921115 Jy
! Component: 200  -  total flux cleaned = 0.0101965 Jy
! Total flux subtracted in 200 components = 0.0101965 Jy
! Clean residual min=-0.003522 max=0.003403 Jy/beam
! Clean residual mean=-0.000000 rms=0.000867 Jy/beam
! Combined flux in latest and established models = 0.248831 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 103 components and 0.248831 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.569 mas, bmaj=12.39 mas, bpa=6.946 degrees
! Estimated noise=4.3814 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000921316 Jy
! Component: 100  -  total flux cleaned = 0.00217024 Jy
! Component: 150  -  total flux cleaned = 0.00304008 Jy
! Component: 200  -  total flux cleaned = 0.00337294 Jy
! Total flux subtracted in 200 components = 0.00337294 Jy
! Clean residual min=-0.003419 max=0.003710 Jy/beam
! Clean residual mean=-0.000001 rms=0.000903 Jy/beam
! Combined flux in latest and established models = 0.252204 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000199474 Jy
! Component: 100  -  total flux cleaned = 0.000334337 Jy
! Component: 150  -  total flux cleaned = 0.000499276 Jy
! Component: 200  -  total flux cleaned = 0.000612106 Jy
! Total flux subtracted in 200 components = 0.000612106 Jy
! Clean residual min=-0.003219 max=0.003348 Jy/beam
! Clean residual mean=-0.000001 rms=0.000868 Jy/beam
! Combined flux in latest and established models = 0.252816 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 145 components and 0.252816 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.25 mas, bmaj=10.98 mas, bpa=4.318 degrees
! Estimated noise=3.84403 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000485036 Jy
! Component: 100  -  total flux cleaned = 0.000601325 Jy
! Component: 150  -  total flux cleaned = 0.000710396 Jy
! Component: 200  -  total flux cleaned = 0.000860472 Jy
! Total flux subtracted in 200 components = 0.000860472 Jy
! Clean residual min=-0.002700 max=0.002549 Jy/beam
! Clean residual mean=-0.000000 rms=0.000718 Jy/beam
! Combined flux in latest and established models = 0.253677 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 172 components and 0.253677 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082444Jy  sigma=0.166260
! Fit after  self-cal, rms=0.082380Jy  sigma=0.166138
wmodel /g0/scr/pima/npcsc_uvs/J0543+8238_S_map.mod
! Writing 172 model components to file: /g0/scr/pima/npcsc_uvs/J0543+8238_S_map.mod
wobs /g0/scr/pima/npcsc_uvs/J0543+8238_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J0543+8238_S_uvs.fits
wwins /g0/scr/pima/npcsc_uvs/J0543+8238_S_map.win
! wwins: Wrote 3 windows to /g0/scr/pima/npcsc_uvs/J0543+8238_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.0012189 Jy
! Component: 100  -  total flux cleaned = -0.00202667 Jy
! Component: 150  -  total flux cleaned = -0.00257766 Jy
! Component: 200  -  total flux cleaned = -0.00302317 Jy
! Component: 250  -  total flux cleaned = -0.00333618 Jy
! Component: 300  -  total flux cleaned = -0.00363854 Jy
! Component: 350  -  total flux cleaned = -0.0039317 Jy
! Component: 400  -  total flux cleaned = -0.0041102 Jy
! Component: 450  -  total flux cleaned = -0.00414503 Jy
! Component: 500  -  total flux cleaned = -0.00414523 Jy
! Component: 550  -  total flux cleaned = -0.00414537 Jy
! Component: 600  -  total flux cleaned = -0.00414561 Jy
! Component: 650  -  total flux cleaned = -0.00408233 Jy
! Component: 700  -  total flux cleaned = -0.0040509 Jy
! Component: 750  -  total flux cleaned = -0.00408156 Jy
! Component: 800  -  total flux cleaned = -0.00408135 Jy
! Component: 850  -  total flux cleaned = -0.00402276 Jy
! Component: 900  -  total flux cleaned = -0.004023 Jy
! Component: 950  -  total flux cleaned = -0.00399451 Jy
! Component: 1000  -  total flux cleaned = -0.00399431 Jy
! Component: 1050  -  total flux cleaned = -0.0039109 Jy
! Component: 1100  -  total flux cleaned = -0.0037749 Jy
! Component: 1150  -  total flux cleaned = -0.00372171 Jy
! Component: 1200  -  total flux cleaned = -0.00361645 Jy
! Component: 1250  -  total flux cleaned = -0.00356433 Jy
! Component: 1300  -  total flux cleaned = -0.00351295 Jy
! Component: 1350  -  total flux cleaned = -0.00343671 Jy
! Component: 1400  -  total flux cleaned = -0.00343675 Jy
! Component: 1450  -  total flux cleaned = -0.00336242 Jy
! Component: 1500  -  total flux cleaned = -0.00328912 Jy
! Component: 1550  -  total flux cleaned = -0.00324096 Jy
! Component: 1600  -  total flux cleaned = -0.00319326 Jy
! Component: 1650  -  total flux cleaned = -0.00314587 Jy
! Component: 1700  -  total flux cleaned = -0.00307607 Jy
! Component: 1750  -  total flux cleaned = -0.00300628 Jy
! Component: 1800  -  total flux cleaned = -0.00293786 Jy
! Component: 1850  -  total flux cleaned = -0.00289248 Jy
! Component: 1900  -  total flux cleaned = -0.00282538 Jy
! Component: 1950  -  total flux cleaned = -0.00280334 Jy
! Component: 2000  -  total flux cleaned = -0.00278094 Jy
! Component: 2050  -  total flux cleaned = -0.00275947 Jy
! Component: 2100  -  total flux cleaned = -0.0028024 Jy
! Component: 2150  -  total flux cleaned = -0.00278097 Jy
! Component: 2200  -  total flux cleaned = -0.00278088 Jy
! Component: 2250  -  total flux cleaned = -0.00284362 Jy
! Component: 2300  -  total flux cleaned = -0.0028643 Jy
! Component: 2350  -  total flux cleaned = -0.0029671 Jy
! Component: 2400  -  total flux cleaned = -0.00298753 Jy
! Component: 2450  -  total flux cleaned = -0.00302732 Jy
! Component: 2500  -  total flux cleaned = -0.00302746 Jy
! Component: 2550  -  total flux cleaned = -0.00304723 Jy
! Component: 2600  -  total flux cleaned = -0.0031257 Jy
! Component: 2650  -  total flux cleaned = -0.00318375 Jy
! Component: 2700  -  total flux cleaned = -0.00314511 Jy
! Component: 2750  -  total flux cleaned = -0.00318344 Jy
! Component: 2800  -  total flux cleaned = -0.00322143 Jy
! Component: 2850  -  total flux cleaned = -0.00320268 Jy
! Component: 2900  -  total flux cleaned = -0.00324009 Jy
! Component: 2950  -  total flux cleaned = -0.00329561 Jy
! Component: 3000  -  total flux cleaned = -0.00325871 Jy
! Component: 3050  -  total flux cleaned = -0.00327709 Jy
! Component: 3100  -  total flux cleaned = -0.00325883 Jy
! Component: 3150  -  total flux cleaned = -0.00325878 Jy
! Component: 3200  -  total flux cleaned = -0.00322331 Jy
! Component: 3250  -  total flux cleaned = -0.00324111 Jy
! Component: 3300  -  total flux cleaned = -0.00324085 Jy
! Component: 3350  -  total flux cleaned = -0.00324055 Jy
! Component: 3400  -  total flux cleaned = -0.00313651 Jy
! Component: 3450  -  total flux cleaned = -0.00310202 Jy
! Component: 3500  -  total flux cleaned = -0.00305073 Jy
! Component: 3550  -  total flux cleaned = -0.00301694 Jy
! Component: 3600  -  total flux cleaned = -0.00298313 Jy
! Component: 3650  -  total flux cleaned = -0.00298311 Jy
! Component: 3700  -  total flux cleaned = -0.00289975 Jy
! Component: 3750  -  total flux cleaned = -0.00285002 Jy
! Component: 3800  -  total flux cleaned = -0.00286654 Jy
! Component: 3850  -  total flux cleaned = -0.00276825 Jy
! Component: 3900  -  total flux cleaned = -0.00271918 Jy
! Component: 3950  -  total flux cleaned = -0.00265442 Jy
! Component: 4000  -  total flux cleaned = -0.00258999 Jy
! Component: 4050  -  total flux cleaned = -0.00250969 Jy
! Total flux subtracted in 4096 components = -0.00246188 Jy
! Clean residual min=-0.000974 max=0.000827 Jy/beam
! Clean residual mean=-0.000001 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.251215 Jy
keep
! Adding 298 model components to the UV plane model.
! The established model now contains 470 components and 0.251215 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsc_uvs/J0543+8238_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.25 x 10.98 at 4.318 degrees (North through East)
! Clean map  min=-0.0038474  max=0.19546 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J0543+8238_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.195463 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000297735 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.45697 0.45697 0.91394 1.82788 3.65576 7.31152 14.623 29.2461 58.4922
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0008 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.195 
quit
! Quitting program
! Log file /g0/scr/pima/npcsc_uvs/J0543+8238_S_uvs.log closed on Sun Oct  6 14:26:54 2013