! Started logfile: /g0/scr/pima/npcsc_uvs/J0507+7912_X_uvs.log on Sun Oct  6 14:23:19 2013
obs /g0/scr/pima/npcsc_uvs/J0507+7912_X_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J0507+7912_X_uva.fits
! AN table 1: 46 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.888889 visibilities/baseline/integration-bin.
! Found source: J0507+7912
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 7360 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J0507+7912_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.004988Jy  sigma=0.751533
! Fit after  self-cal, rms=0.963717Jy  sigma=0.686217
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7167 mas, bmaj=2.819 mas, bpa=4.826 degrees
! Estimated noise=23.5725 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0474424 Jy
! Component: 100  -  total flux cleaned = 0.0578166 Jy
! Total flux subtracted in 100 components = 0.0578166 Jy
! Clean residual min=-0.005989 max=0.005873 Jy/beam
! Clean residual mean=0.000001 rms=0.001487 Jy/beam
! Combined flux in latest and established models = 0.0578166 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.0578166 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081705Jy  sigma=0.068836
! Fit after  self-cal, rms=0.080008Jy  sigma=0.067559
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9031 mas, bmaj=2.869 mas, bpa=2.908 degrees
! Estimated noise=12.4755 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00524243 Jy
! Component: 100  -  total flux cleaned = 0.00651211 Jy
! Component: 150  -  total flux cleaned = 0.00682002 Jy
! Component: 200  -  total flux cleaned = 0.00705138 Jy
! Total flux subtracted in 200 components = 0.00705138 Jy
! Clean residual min=-0.003655 max=0.004831 Jy/beam
! Clean residual mean=0.000008 rms=0.001019 Jy/beam
! Combined flux in latest and established models = 0.064868 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 14 components and 0.064868 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081373Jy  sigma=0.066283
! Fit after  self-cal, rms=0.081295Jy  sigma=0.066228
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.84     FD        0.91     HN        0.83     KP        0.92     
!   LA        0.95     MK        0.90     NL        0.95     OV        0.84     
!   PT        0.92     SC        0.92     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.84     FD        0.89     HN        0.88     KP        0.87     
!   LA        0.85     MK        0.95     NL        0.90     OV        0.81     
!   PT        1.04     SC        0.82     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.83     FD        0.81     HN        0.79     KP        0.68     
!   LA        0.88     MK        0.73     NL        0.95     OV        0.94     
!   PT        1.05     SC        0.83     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.81     FD        0.83     HN        0.80     KP        0.74     
!   LA        0.77     MK        0.75     NL        1.00     OV        0.88     
!   PT        1.06     SC        0.75     
! 
! 
! Fit before self-cal, rms=0.081295Jy  sigma=0.066228
! Fit after  self-cal, rms=0.066536Jy  sigma=0.063569
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8884 mas, bmaj=2.828 mas, bpa=3.032 degrees
! Estimated noise=9.29812 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0122837 Jy
! Component: 100  -  total flux cleaned = -0.0146355 Jy
! Component: 150  -  total flux cleaned = -0.0144302 Jy
! Component: 200  -  total flux cleaned = -0.0141118 Jy
! Total flux subtracted in 200 components = -0.0141118 Jy
! Clean residual min=-0.002588 max=0.002470 Jy/beam
! Clean residual mean=0.000002 rms=0.000604 Jy/beam
! Combined flux in latest and established models = 0.0507562 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 27 components and 0.0507562 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060581Jy  sigma=0.065375
! Fit after  self-cal, rms=0.060721Jy  sigma=0.065278
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060721Jy  sigma=0.065278
! Fit after  self-cal, rms=0.050972Jy  sigma=0.063388
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8822 mas, bmaj=2.821 mas, bpa=3.051 degrees
! Estimated noise=7.08001 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00934607 Jy
! Component: 100  -  total flux cleaned = -0.0113881 Jy
! Component: 150  -  total flux cleaned = -0.0112674 Jy
! Component: 200  -  total flux cleaned = -0.0110467 Jy
! Total flux subtracted in 200 components = -0.0110467 Jy
! Clean residual min=-0.001974 max=0.001906 Jy/beam
! Clean residual mean=0.000002 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 0.0397095 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 32 components and 0.0397095 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046451Jy  sigma=0.065230
! Fit after  self-cal, rms=0.046456Jy  sigma=0.065201
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000213249 Jy
! Component: 100  -  total flux cleaned = 0.000334762 Jy
! Component: 150  -  total flux cleaned = 0.000406575 Jy
! Component: 200  -  total flux cleaned = 0.00043174 Jy
! Total flux subtracted in 200 components = 0.00043174 Jy
! Clean residual min=-0.002061 max=0.001951 Jy/beam
! Clean residual mean=0.000002 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.0401413 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 34 components and 0.0401413 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046424Jy  sigma=0.065219
! Fit after  self-cal, rms=0.046392Jy  sigma=0.065208
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046392Jy  sigma=0.065208
! Fit after  self-cal, rms=0.038633Jy  sigma=0.063281
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8743 mas, bmaj=2.815 mas, bpa=3.054 degrees
! Estimated noise=5.35864 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00706368 Jy
! Component: 100  -  total flux cleaned = -0.0086085 Jy
! Component: 150  -  total flux cleaned = -0.00871703 Jy
! Component: 200  -  total flux cleaned = -0.0086312 Jy
! Total flux subtracted in 200 components = -0.0086312 Jy
! Clean residual min=-0.001550 max=0.001451 Jy/beam
! Clean residual mean=0.000002 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.0315101 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 37 components and 0.0315101 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.035208Jy  sigma=0.065154
! Fit after  self-cal, rms=0.035197Jy  sigma=0.065141
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.11689e-05 Jy
! Component: 100  -  total flux cleaned = -3.01979e-05 Jy
! Component: 150  -  total flux cleaned = -1.14278e-05 Jy
! Component: 200  -  total flux cleaned = 5.14025e-06 Jy
! Total flux subtracted in 200 components = 5.14025e-06 Jy
! Clean residual min=-0.001577 max=0.001440 Jy/beam
! Clean residual mean=0.000002 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.0315152 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 39 components and 0.0315152 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.035184Jy  sigma=0.065142
! Fit after  self-cal, rms=0.035179Jy  sigma=0.065136
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.035179Jy  sigma=0.065136
! Fit after  self-cal, rms=0.029286Jy  sigma=0.063213
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.987 mas, bmaj=3.235 mas, bpa=1.289 degrees
! Estimated noise=5.61842 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00526773 Jy
! Component: 100  -  total flux cleaned = -0.00643407 Jy
! Component: 150  -  total flux cleaned = -0.00682897 Jy
! Component: 200  -  total flux cleaned = -0.00703804 Jy
! Total flux subtracted in 200 components = -0.00703804 Jy
! Clean residual min=-0.001235 max=0.001312 Jy/beam
! Clean residual mean=0.000003 rms=0.000355 Jy/beam
! Combined flux in latest and established models = 0.0244772 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 54 components and 0.0244771 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.026770Jy  sigma=0.064957
! Fit after  self-cal, rms=0.026765Jy  sigma=0.064925
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000252906 Jy
! Component: 100  -  total flux cleaned = -0.000273187 Jy
! Component: 150  -  total flux cleaned = -0.000273414 Jy
! Component: 200  -  total flux cleaned = -0.00027703 Jy
! Total flux subtracted in 200 components = -0.00027703 Jy
! Clean residual min=-0.001243 max=0.001290 Jy/beam
! Clean residual mean=0.000003 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.0242001 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 58 components and 0.0242001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.026759Jy  sigma=0.064931
! Fit after  self-cal, rms=0.026756Jy  sigma=0.064926
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8664 mas, bmaj=2.81 mas, bpa=3.06 degrees
! Estimated noise=4.05435 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8664 x 2.81 at 3.06 degrees (North through East)
! Clean map  min=-0.0010985  max=0.020629 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6974 mas, bmaj=2.777 mas, bpa=4.959 degrees
! Estimated noise=7.31851 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.015171 Jy
! Component: 100  -  total flux cleaned = 0.0193874 Jy
! Component: 150  -  total flux cleaned = 0.0216341 Jy
! Component: 200  -  total flux cleaned = 0.0232105 Jy
! Total flux subtracted in 200 components = 0.0232105 Jy
! Clean residual min=-0.001978 max=0.001760 Jy/beam
! Clean residual mean=-0.000000 rms=0.000444 Jy/beam
! Combined flux in latest and established models = 0.0232105 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.0232105 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8664 mas, bmaj=2.81 mas, bpa=3.06 degrees
! Estimated noise=4.05435 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000787089 Jy
! Component: 100  -  total flux cleaned = 0.000863139 Jy
! Component: 150  -  total flux cleaned = 0.000886578 Jy
! Component: 200  -  total flux cleaned = 0.00090519 Jy
! Total flux subtracted in 200 components = 0.00090519 Jy
! Clean residual min=-0.001289 max=0.001070 Jy/beam
! Clean residual mean=0.000001 rms=0.000273 Jy/beam
! Combined flux in latest and established models = 0.0241157 Jy
! Adding 12 model components to the UV plane model.
! The established model now contains 30 components and 0.0241157 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.987 mas, bmaj=3.235 mas, bpa=1.289 degrees
! Estimated noise=5.61842 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000227226 Jy
! Component: 100  -  total flux cleaned = 0.00017782 Jy
! Component: 150  -  total flux cleaned = 0.000147768 Jy
! Component: 200  -  total flux cleaned = 0.000115252 Jy
! Total flux subtracted in 200 components = 0.000115252 Jy
! Clean residual min=-0.001242 max=0.001282 Jy/beam
! Clean residual mean=0.000003 rms=0.000353 Jy/beam
! Combined flux in latest and established models = 0.024231 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.0423e-05 Jy
! Component: 100  -  total flux cleaned = -2.63311e-05 Jy
! Component: 150  -  total flux cleaned = -3.21123e-05 Jy
! Component: 200  -  total flux cleaned = -3.22966e-05 Jy
! Total flux subtracted in 200 components = -3.22966e-05 Jy
! Clean residual min=-0.001236 max=0.001275 Jy/beam
! Clean residual mean=0.000003 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.0241987 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 46 components and 0.0241987 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8664 mas, bmaj=2.81 mas, bpa=3.06 degrees
! Estimated noise=4.05435 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.16539e-05 Jy
! Component: 100  -  total flux cleaned = 0.000212502 Jy
! Component: 150  -  total flux cleaned = 0.000224462 Jy
! Component: 200  -  total flux cleaned = 0.000214709 Jy
! Total flux subtracted in 200 components = 0.000214709 Jy
! Clean residual min=-0.001218 max=0.001084 Jy/beam
! Clean residual mean=0.000001 rms=0.000265 Jy/beam
! Combined flux in latest and established models = 0.0244134 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 51 components and 0.0244134 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.026659Jy  sigma=0.065165
! Fit after  self-cal, rms=0.026641Jy  sigma=0.065149
wmodel /g0/scr/pima/npcsc_uvs/J0507+7912_X_map.mod
! Writing 51 model components to file: /g0/scr/pima/npcsc_uvs/J0507+7912_X_map.mod
wobs /g0/scr/pima/npcsc_uvs/J0507+7912_X_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J0507+7912_X_uvs.fits
wwins /g0/scr/pima/npcsc_uvs/J0507+7912_X_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsc_uvs/J0507+7912_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000237416 Jy
! Component: 100  -  total flux cleaned = -0.000465494 Jy
! Component: 150  -  total flux cleaned = -0.000573139 Jy
! Component: 200  -  total flux cleaned = -0.000572912 Jy
! Component: 250  -  total flux cleaned = -0.000557162 Jy
! Component: 300  -  total flux cleaned = -0.000541412 Jy
! Component: 350  -  total flux cleaned = -0.000556895 Jy
! Component: 400  -  total flux cleaned = -0.000556813 Jy
! Component: 450  -  total flux cleaned = -0.00057136 Jy
! Component: 500  -  total flux cleaned = -0.000571044 Jy
! Component: 550  -  total flux cleaned = -0.000556992 Jy
! Component: 600  -  total flux cleaned = -0.000570696 Jy
! Component: 650  -  total flux cleaned = -0.000544025 Jy
! Component: 700  -  total flux cleaned = -0.000557397 Jy
! Component: 750  -  total flux cleaned = -0.000570608 Jy
! Component: 800  -  total flux cleaned = -0.000596304 Jy
! Component: 850  -  total flux cleaned = -0.000583756 Jy
! Component: 900  -  total flux cleaned = -0.000558871 Jy
! Component: 950  -  total flux cleaned = -0.000583384 Jy
! Component: 1000  -  total flux cleaned = -0.000583352 Jy
! Component: 1050  -  total flux cleaned = -0.000536026 Jy
! Component: 1100  -  total flux cleaned = -0.000524354 Jy
! Component: 1150  -  total flux cleaned = -0.000512695 Jy
! Component: 1200  -  total flux cleaned = -0.000524072 Jy
! Component: 1250  -  total flux cleaned = -0.000523821 Jy
! Component: 1300  -  total flux cleaned = -0.000523754 Jy
! Component: 1350  -  total flux cleaned = -0.000534628 Jy
! Component: 1400  -  total flux cleaned = -0.000534657 Jy
! Component: 1450  -  total flux cleaned = -0.000534702 Jy
! Component: 1500  -  total flux cleaned = -0.000566842 Jy
! Component: 1550  -  total flux cleaned = -0.000588056 Jy
! Component: 1600  -  total flux cleaned = -0.000650821 Jy
! Component: 1650  -  total flux cleaned = -0.000661045 Jy
! Component: 1700  -  total flux cleaned = -0.000640599 Jy
! Component: 1750  -  total flux cleaned = -0.000671225 Jy
! Component: 1800  -  total flux cleaned = -0.000671265 Jy
! Component: 1850  -  total flux cleaned = -0.000701221 Jy
! Component: 1900  -  total flux cleaned = -0.000671664 Jy
! Component: 1950  -  total flux cleaned = -0.000691322 Jy
! Component: 2000  -  total flux cleaned = -0.000740016 Jy
! Component: 2050  -  total flux cleaned = -0.000769048 Jy
! Component: 2100  -  total flux cleaned = -0.000788077 Jy
! Component: 2150  -  total flux cleaned = -0.00080707 Jy
! Component: 2200  -  total flux cleaned = -0.000807194 Jy
! Component: 2250  -  total flux cleaned = -0.000844457 Jy
! Component: 2300  -  total flux cleaned = -0.000844462 Jy
! Component: 2350  -  total flux cleaned = -0.000871915 Jy
! Component: 2400  -  total flux cleaned = -0.000890067 Jy
! Component: 2450  -  total flux cleaned = -0.000899022 Jy
! Component: 2500  -  total flux cleaned = -0.000916995 Jy
! Component: 2550  -  total flux cleaned = -0.000943583 Jy
! Component: 2600  -  total flux cleaned = -0.000943652 Jy
! Component: 2650  -  total flux cleaned = -0.000970069 Jy
! Component: 2700  -  total flux cleaned = -0.00100487 Jy
! Component: 2750  -  total flux cleaned = -0.00102219 Jy
! Component: 2800  -  total flux cleaned = -0.00103081 Jy
! Component: 2850  -  total flux cleaned = -0.00103081 Jy
! Component: 2900  -  total flux cleaned = -0.00103917 Jy
! Component: 2950  -  total flux cleaned = -0.00102234 Jy
! Component: 3000  -  total flux cleaned = -0.00102245 Jy
! Component: 3050  -  total flux cleaned = -0.00104745 Jy
! Component: 3100  -  total flux cleaned = -0.00100624 Jy
! Component: 3150  -  total flux cleaned = -0.00105531 Jy
! Component: 3200  -  total flux cleaned = -0.00103088 Jy
! Component: 3250  -  total flux cleaned = -0.00101475 Jy
! Component: 3300  -  total flux cleaned = -0.00102276 Jy
! Component: 3350  -  total flux cleaned = -0.00100675 Jy
! Component: 3400  -  total flux cleaned = -0.000990894 Jy
! Component: 3450  -  total flux cleaned = -0.000982981 Jy
! Component: 3500  -  total flux cleaned = -0.000975158 Jy
! Component: 3550  -  total flux cleaned = -0.000982949 Jy
! Component: 3600  -  total flux cleaned = -0.000975269 Jy
! Component: 3650  -  total flux cleaned = -0.000952057 Jy
! Component: 3700  -  total flux cleaned = -0.00094443 Jy
! Component: 3750  -  total flux cleaned = -0.000952099 Jy
! Component: 3800  -  total flux cleaned = -0.000921691 Jy
! Component: 3850  -  total flux cleaned = -0.000944367 Jy
! Component: 3900  -  total flux cleaned = -0.000959376 Jy
! Component: 3950  -  total flux cleaned = -0.000936911 Jy
! Component: 4000  -  total flux cleaned = -0.000899743 Jy
! Component: 4050  -  total flux cleaned = -0.000921993 Jy
! Total flux subtracted in 4096 components = -0.000929389 Jy
! Clean residual min=-0.000547 max=0.000450 Jy/beam
! Clean residual mean=-0.000000 rms=0.000134 Jy/beam
! Combined flux in latest and established models = 0.023484 Jy
keep
! Adding 311 model components to the UV plane model.
! The established model now contains 362 components and 0.023484 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsc_uvs/J0507+7912_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8664 x 2.81 at 3.06 degrees (North through East)
! Clean map  min=-0.0010382  max=0.020438 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J0507+7912_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0204382 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000132802 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.94931 1.94931 3.89862 7.79724 15.5945 31.1889 62.3779
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0003 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.02 
quit
! Quitting program
! Log file /g0/scr/pima/npcsc_uvs/J0507+7912_X_uvs.log closed on Sun Oct  6 14:23:23 2013