! Started logfile: /g0/scr/pima/npcsc_uvs/J0449+8233_S_uvs.log on Sun Oct  6 14:26:43 2013
obs /g0/scr/pima/npcsc_uvs/J0449+8233_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J0449+8233_S_uva.fits
! AN table 1: 45 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.991111 visibilities/baseline/integration-bin.
! Found source: J0449+8233
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 8028 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J0449+8233_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.009814Jy  sigma=1.253071
! Fit after  self-cal, rms=0.873137Jy  sigma=1.018469
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.352 mas, bmaj=10.35 mas, bpa=1.124 degrees
! Estimated noise=14.632 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.117089 Jy
! Component: 100  -  total flux cleaned = 0.146545 Jy
! Total flux subtracted in 100 components = 0.146545 Jy
! Clean residual min=-0.010061 max=0.012581 Jy/beam
! Clean residual mean=0.000008 rms=0.002516 Jy/beam
! Combined flux in latest and established models = 0.146545 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.146545 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098153Jy  sigma=0.125194
! Fit after  self-cal, rms=0.098085Jy  sigma=0.125032
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.222 mas, bmaj=10.84 mas, bpa=0.693 degrees
! Estimated noise=7.01194 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0188748 Jy
! Component: 100  -  total flux cleaned = 0.0269703 Jy
! Component: 150  -  total flux cleaned = 0.0318259 Jy
! Component: 200  -  total flux cleaned = 0.0350604 Jy
! Total flux subtracted in 200 components = 0.0350604 Jy
! Clean residual min=-0.007014 max=0.005997 Jy/beam
! Clean residual mean=0.000001 rms=0.001737 Jy/beam
! Combined flux in latest and established models = 0.181605 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 49 components and 0.181605 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098400Jy  sigma=0.116704
! Fit after  self-cal, rms=0.098425Jy  sigma=0.116624
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.92     HN        0.89     KP        0.95     
!   LA        1.03     MK        0.81     NL        0.97     OV        0.98     
!   PT        1.07     SC        0.84     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        0.90     KP        0.96     
!   LA        0.95     MK        0.92     NL        0.96     OV        0.97     
!   PT        0.92     SC        0.80     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.21     FD        0.98     HN        0.88     KP        0.92     
!   LA        0.78     MK        1.03     NL        1.12     OV        0.97     
!   PT        1.11     SC        0.88     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.99     HN        0.88     KP        0.88     
!   LA        0.66     MK        0.98     NL        0.99     OV        0.83     
!   PT        0.96     SC        0.91     
! 
! 
! Fit before self-cal, rms=0.098425Jy  sigma=0.116624
! Fit after  self-cal, rms=0.089036Jy  sigma=0.108429
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.161 mas, bmaj=10.89 mas, bpa=0.4225 degrees
! Estimated noise=6.18949 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0132108 Jy
! Component: 100  -  total flux cleaned = -0.0149267 Jy
! Component: 150  -  total flux cleaned = -0.0147586 Jy
! Component: 200  -  total flux cleaned = -0.0149465 Jy
! Total flux subtracted in 200 components = -0.0149465 Jy
! Clean residual min=-0.003415 max=0.004279 Jy/beam
! Clean residual mean=0.000001 rms=0.000958 Jy/beam
! Combined flux in latest and established models = 0.166659 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 60 components and 0.166659 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083269Jy  sigma=0.110623
! Fit after  self-cal, rms=0.083397Jy  sigma=0.110517
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083397Jy  sigma=0.110517
! Fit after  self-cal, rms=0.079508Jy  sigma=0.108281
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.125 mas, bmaj=10.89 mas, bpa=0.4672 degrees
! Estimated noise=5.56464 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0116371 Jy
! Component: 100  -  total flux cleaned = -0.0142391 Jy
! Component: 150  -  total flux cleaned = -0.0146304 Jy
! Component: 200  -  total flux cleaned = -0.0150401 Jy
! Total flux subtracted in 200 components = -0.0150401 Jy
! Clean residual min=-0.003005 max=0.004087 Jy/beam
! Clean residual mean=0.000001 rms=0.000864 Jy/beam
! Combined flux in latest and established models = 0.151619 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 68 components and 0.151619 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074560Jy  sigma=0.110548
! Fit after  self-cal, rms=0.074567Jy  sigma=0.110540
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-10.5, -4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00388195 Jy
! Component: 100  -  total flux cleaned = 0.00615701 Jy
! Component: 150  -  total flux cleaned = 0.00663733 Jy
! Component: 200  -  total flux cleaned = 0.00663756 Jy
! Total flux subtracted in 200 components = 0.00663756 Jy
! Clean residual min=-0.002566 max=0.002776 Jy/beam
! Clean residual mean=0.000001 rms=0.000699 Jy/beam
! Combined flux in latest and established models = 0.158256 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 103 components and 0.158256 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074207Jy  sigma=0.110301
! Fit after  self-cal, rms=0.074176Jy  sigma=0.110251
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074176Jy  sigma=0.110251
! Fit after  self-cal, rms=0.070610Jy  sigma=0.107854
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.084 mas, bmaj=10.9 mas, bpa=0.5129 degrees
! Estimated noise=4.99362 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0101467 Jy
! Component: 100  -  total flux cleaned = -0.0112671 Jy
! Component: 150  -  total flux cleaned = -0.0113992 Jy
! Component: 200  -  total flux cleaned = -0.0114022 Jy
! Total flux subtracted in 200 components = -0.0114022 Jy
! Clean residual min=-0.002210 max=0.002305 Jy/beam
! Clean residual mean=0.000001 rms=0.000594 Jy/beam
! Combined flux in latest and established models = 0.146854 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 114 components and 0.146854 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066395Jy  sigma=0.109939
! Fit after  self-cal, rms=0.066396Jy  sigma=0.109926
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000363878 Jy
! Component: 100  -  total flux cleaned = 0.000489035 Jy
! Component: 150  -  total flux cleaned = 0.000526384 Jy
! Component: 200  -  total flux cleaned = 0.000525453 Jy
! Total flux subtracted in 200 components = 0.000525453 Jy
! Clean residual min=-0.002234 max=0.002215 Jy/beam
! Clean residual mean=0.000001 rms=0.000573 Jy/beam
! Combined flux in latest and established models = 0.14738 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 134 components and 0.14738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066262Jy  sigma=0.109999
! Fit after  self-cal, rms=0.066259Jy  sigma=0.109995
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066259Jy  sigma=0.109995
! Fit after  self-cal, rms=0.063236Jy  sigma=0.107729
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.344 mas, bmaj=12.48 mas, bpa=-0.5254 degrees
! Estimated noise=5.39501 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00905565 Jy
! Component: 100  -  total flux cleaned = -0.0104302 Jy
! Component: 150  -  total flux cleaned = -0.0108836 Jy
! Component: 200  -  total flux cleaned = -0.011038 Jy
! Total flux subtracted in 200 components = -0.011038 Jy
! Clean residual min=-0.002053 max=0.002381 Jy/beam
! Clean residual mean=0.000003 rms=0.000709 Jy/beam
! Combined flux in latest and established models = 0.136342 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 161 components and 0.136342 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059569Jy  sigma=0.109895
! Fit after  self-cal, rms=0.059572Jy  sigma=0.109872
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000164094 Jy
! Component: 100  -  total flux cleaned = 0.000194367 Jy
! Component: 150  -  total flux cleaned = 0.000220983 Jy
! Component: 200  -  total flux cleaned = 0.00022187 Jy
! Total flux subtracted in 200 components = 0.00022187 Jy
! Clean residual min=-0.002023 max=0.002393 Jy/beam
! Clean residual mean=0.000003 rms=0.000688 Jy/beam
! Combined flux in latest and established models = 0.136563 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 179 components and 0.136563 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059490Jy  sigma=0.109992
! Fit after  self-cal, rms=0.059489Jy  sigma=0.109987
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.051 mas, bmaj=10.92 mas, bpa=0.5391 degrees
! Estimated noise=4.49541 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.051 x 10.92 at 0.5391 degrees (North through East)
! Clean map  min=-0.0021132  max=0.10085 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.235 mas, bmaj=10.49 mas, bpa=1.088 degrees
! Estimated noise=8.87237 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0710535 Jy
! Component: 100  -  total flux cleaned = 0.0926296 Jy
! Component: 150  -  total flux cleaned = 0.104208 Jy
! Component: 200  -  total flux cleaned = 0.11106 Jy
! Total flux subtracted in 200 components = 0.11106 Jy
! Clean residual min=-0.004122 max=0.005205 Jy/beam
! Clean residual mean=0.000006 rms=0.001154 Jy/beam
! Combined flux in latest and established models = 0.11106 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.11106 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.051 mas, bmaj=10.92 mas, bpa=0.5391 degrees
! Estimated noise=4.49541 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.5, -0.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00788871 Jy
! Component: 100  -  total flux cleaned = 0.0125238 Jy
! Component: 150  -  total flux cleaned = 0.0156392 Jy
! Component: 200  -  total flux cleaned = 0.0173615 Jy
! Total flux subtracted in 200 components = 0.0173615 Jy
! Clean residual min=-0.002558 max=0.002349 Jy/beam
! Clean residual mean=0.000003 rms=0.000622 Jy/beam
! Combined flux in latest and established models = 0.128421 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 54 components and 0.128421 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.344 mas, bmaj=12.48 mas, bpa=-0.5254 degrees
! Estimated noise=5.39501 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00288818 Jy
! Component: 100  -  total flux cleaned = 0.00418894 Jy
! Component: 150  -  total flux cleaned = 0.0049832 Jy
! Component: 200  -  total flux cleaned = 0.00536515 Jy
! Total flux subtracted in 200 components = 0.00536515 Jy
! Clean residual min=-0.002449 max=0.002538 Jy/beam
! Clean residual mean=0.000005 rms=0.000739 Jy/beam
! Combined flux in latest and established models = 0.133786 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000300081 Jy
! Component: 100  -  total flux cleaned = 0.000607707 Jy
! Component: 150  -  total flux cleaned = 0.000847991 Jy
! Component: 200  -  total flux cleaned = 0.00106553 Jy
! Total flux subtracted in 200 components = 0.00106553 Jy
! Clean residual min=-0.002291 max=0.002427 Jy/beam
! Clean residual mean=0.000004 rms=0.000694 Jy/beam
! Combined flux in latest and established models = 0.134852 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 109 components and 0.134852 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.051 mas, bmaj=10.92 mas, bpa=0.5391 degrees
! Estimated noise=4.49541 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.66282e-06 Jy
! Component: 100  -  total flux cleaned = -0.000133719 Jy
! Component: 150  -  total flux cleaned = -0.00024374 Jy
! Component: 200  -  total flux cleaned = -0.000276198 Jy
! Total flux subtracted in 200 components = -0.000276198 Jy
! Clean residual min=-0.001995 max=0.002015 Jy/beam
! Clean residual mean=0.000002 rms=0.000495 Jy/beam
! Combined flux in latest and established models = 0.134576 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 132 components and 0.134576 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059314Jy  sigma=0.110201
! Fit after  self-cal, rms=0.059290Jy  sigma=0.110153
wmodel /g0/scr/pima/npcsc_uvs/J0449+8233_S_map.mod
! Writing 132 model components to file: /g0/scr/pima/npcsc_uvs/J0449+8233_S_map.mod
wobs /g0/scr/pima/npcsc_uvs/J0449+8233_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J0449+8233_S_uvs.fits
wwins /g0/scr/pima/npcsc_uvs/J0449+8233_S_map.win
! wwins: Wrote 3 windows to /g0/scr/pima/npcsc_uvs/J0449+8233_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -7.8844e-05 Jy
! Component: 100  -  total flux cleaned = -0.000303233 Jy
! Component: 150  -  total flux cleaned = -0.000515725 Jy
! Component: 200  -  total flux cleaned = -0.000630244 Jy
! Component: 250  -  total flux cleaned = -0.000713826 Jy
! Component: 300  -  total flux cleaned = -0.000847537 Jy
! Component: 350  -  total flux cleaned = -0.000951035 Jy
! Component: 400  -  total flux cleaned = -0.00105114 Jy
! Component: 450  -  total flux cleaned = -0.00122241 Jy
! Component: 500  -  total flux cleaned = -0.00143705 Jy
! Component: 550  -  total flux cleaned = -0.00169245 Jy
! Component: 600  -  total flux cleaned = -0.0018964 Jy
! Component: 650  -  total flux cleaned = -0.0020737 Jy
! Component: 700  -  total flux cleaned = -0.00226885 Jy
! Component: 750  -  total flux cleaned = -0.00243833 Jy
! Component: 800  -  total flux cleaned = -0.00252139 Jy
! Component: 850  -  total flux cleaned = -0.00266483 Jy
! Component: 900  -  total flux cleaned = -0.00270536 Jy
! Component: 950  -  total flux cleaned = -0.00276509 Jy
! Component: 1000  -  total flux cleaned = -0.00278495 Jy
! Component: 1050  -  total flux cleaned = -0.00286223 Jy
! Component: 1100  -  total flux cleaned = -0.00288127 Jy
! Component: 1150  -  total flux cleaned = -0.00293712 Jy
! Component: 1200  -  total flux cleaned = -0.00288195 Jy
! Component: 1250  -  total flux cleaned = -0.0028276 Jy
! Component: 1300  -  total flux cleaned = -0.00282741 Jy
! Component: 1350  -  total flux cleaned = -0.00280956 Jy
! Component: 1400  -  total flux cleaned = -0.00275704 Jy
! Component: 1450  -  total flux cleaned = -0.00273985 Jy
! Component: 1500  -  total flux cleaned = -0.00272262 Jy
! Component: 1550  -  total flux cleaned = -0.00267154 Jy
! Component: 1600  -  total flux cleaned = -0.00260454 Jy
! Component: 1650  -  total flux cleaned = -0.00252174 Jy
! Component: 1700  -  total flux cleaned = -0.00243933 Jy
! Component: 1750  -  total flux cleaned = -0.00235813 Jy
! Component: 1800  -  total flux cleaned = -0.00229402 Jy
! Component: 1850  -  total flux cleaned = -0.00221421 Jy
! Component: 1900  -  total flux cleaned = -0.00218236 Jy
! Component: 1950  -  total flux cleaned = -0.00204142 Jy
! Component: 2000  -  total flux cleaned = -0.00201036 Jy
! Component: 2050  -  total flux cleaned = -0.00188729 Jy
! Component: 2100  -  total flux cleaned = -0.00181112 Jy
! Component: 2150  -  total flux cleaned = -0.00175058 Jy
! Component: 2200  -  total flux cleaned = -0.00166053 Jy
! Component: 2250  -  total flux cleaned = -0.00163091 Jy
! Component: 2300  -  total flux cleaned = -0.00154256 Jy
! Component: 2350  -  total flux cleaned = -0.00151317 Jy
! Component: 2400  -  total flux cleaned = -0.00141167 Jy
! Component: 2450  -  total flux cleaned = -0.00136868 Jy
! Component: 2500  -  total flux cleaned = -0.00135437 Jy
! Component: 2550  -  total flux cleaned = -0.00135448 Jy
! Component: 2600  -  total flux cleaned = -0.00136871 Jy
! Component: 2650  -  total flux cleaned = -0.00143848 Jy
! Component: 2700  -  total flux cleaned = -0.00139681 Jy
! Component: 2750  -  total flux cleaned = -0.00134185 Jy
! Component: 2800  -  total flux cleaned = -0.00141018 Jy
! Component: 2850  -  total flux cleaned = -0.00139673 Jy
! Component: 2900  -  total flux cleaned = -0.00141008 Jy
! Component: 2950  -  total flux cleaned = -0.00142353 Jy
! Component: 3000  -  total flux cleaned = -0.00142349 Jy
! Component: 3050  -  total flux cleaned = -0.00139706 Jy
! Component: 3100  -  total flux cleaned = -0.00144969 Jy
! Component: 3150  -  total flux cleaned = -0.00143654 Jy
! Component: 3200  -  total flux cleaned = -0.00142359 Jy
! Component: 3250  -  total flux cleaned = -0.00150135 Jy
! Component: 3300  -  total flux cleaned = -0.00150139 Jy
! Component: 3350  -  total flux cleaned = -0.00153983 Jy
! Component: 3400  -  total flux cleaned = -0.00152705 Jy
! Component: 3450  -  total flux cleaned = -0.00157773 Jy
! Component: 3500  -  total flux cleaned = -0.0015904 Jy
! Component: 3550  -  total flux cleaned = -0.00155264 Jy
! Component: 3600  -  total flux cleaned = -0.00157758 Jy
! Component: 3650  -  total flux cleaned = -0.0015901 Jy
! Component: 3700  -  total flux cleaned = -0.00162726 Jy
! Component: 3750  -  total flux cleaned = -0.00162722 Jy
! Component: 3800  -  total flux cleaned = -0.0016273 Jy
! Component: 3850  -  total flux cleaned = -0.00161516 Jy
! Component: 3900  -  total flux cleaned = -0.00163944 Jy
! Component: 3950  -  total flux cleaned = -0.0016396 Jy
! Component: 4000  -  total flux cleaned = -0.00163958 Jy
! Component: 4050  -  total flux cleaned = -0.00163951 Jy
! Total flux subtracted in 4096 components = -0.00162769 Jy
! Clean residual min=-0.000709 max=0.000738 Jy/beam
! Clean residual mean=0.000001 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.132948 Jy
keep
! Adding 306 model components to the UV plane model.
! The established model now contains 438 components and 0.132948 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsc_uvs/J0449+8233_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.051 x 10.92 at 0.5391 degrees (North through East)
! Clean map  min=-0.0014432  max=0.10003 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J0449+8233_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.100034 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000224923 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.67454 0.67454 1.34908 2.69816 5.39632 10.7926 21.5853 43.1706 86.3411
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0006 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.1 
quit
! Quitting program
! Log file /g0/scr/pima/npcsc_uvs/J0449+8233_S_uvs.log closed on Sun Oct  6 14:26:47 2013