! Started logfile: /g0/scr/pima/npcsc_uvs/J0410+7656_S_uvs.log on Sun Oct  6 14:26:32 2013
obs /g0/scr/pima/npcsc_uvs/J0410+7656_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J0410+7656_S_uva.fits
! AN table 1: 47 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.806147 visibilities/baseline/integration-bin.
! Found source: J0410+7656
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 6820 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J0410+7656_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.655085Jy  sigma=28.414010
! Fit after  self-cal, rms=1.065297Jy  sigma=19.959851
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.367 mas, bmaj=9.777 mas, bpa=4.067 degrees
! Estimated noise=3.61045 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.15702 Jy
! Component: 100  -  total flux cleaned = 1.70854 Jy
! Total flux subtracted in 100 components = 1.70854 Jy
! Clean residual min=-0.303922 max=0.305091 Jy/beam
! Clean residual mean=0.001066 rms=0.110367 Jy/beam
! Combined flux in latest and established models = 1.70854 Jy
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 55 components and 1.70854 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.723420Jy  sigma=14.676700
! Fit after  self-cal, rms=0.715597Jy  sigma=14.629044
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.463 mas, bmaj=11.76 mas, bpa=6.496 degrees
! Estimated noise=1.12734 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.603381 Jy
! Component: 100  -  total flux cleaned = 0.917541 Jy
! Component: 150  -  total flux cleaned = 1.07547 Jy
! Component: 200  -  total flux cleaned = 1.14758 Jy
! Total flux subtracted in 200 components = 1.14758 Jy
! Clean residual min=-0.128835 max=0.129943 Jy/beam
! Clean residual mean=0.001071 rms=0.058190 Jy/beam
! Combined flux in latest and established models = 2.85612 Jy
! Performing phase self-cal
! Adding 150 model components to the UV plane model.
! The established model now contains 204 components and 2.85612 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.372543Jy  sigma=5.498723
! Fit after  self-cal, rms=0.369787Jy  sigma=5.468751
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.93     HN        1.65     KP        0.93     
!   LA        1.06     MK        1.09     NL        1.04     OV        1.02     
!   PT        0.95     SC        1.12     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        0.97     HN        1.59     KP        0.95     
!   LA        1.04     MK        0.97     NL        1.05     OV        1.04     
!   PT        0.90     SC        1.12     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.04     HN        1.46     KP        1.05     
!   LA        0.83     MK        0.97     NL        1.10     OV        0.98     
!   PT        1.02     SC        1.10     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.27     FD        1.05     HN        1.23     KP        0.97     
!   LA        0.70     MK        1.02     NL        1.04     OV        0.81     
!   PT        0.91     SC        1.25     
! 
! 
! Fit before self-cal, rms=0.369787Jy  sigma=5.468751
! Fit after  self-cal, rms=0.310440Jy  sigma=2.081910
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.816 mas, bmaj=12.47 mas, bpa=8.595 degrees
! Estimated noise=1.09029 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0706552 Jy
! Component: 100  -  total flux cleaned = 0.105396 Jy
! Component: 150  -  total flux cleaned = 0.120662 Jy
! Component: 200  -  total flux cleaned = 0.133755 Jy
! Total flux subtracted in 200 components = 0.133755 Jy
! Clean residual min=-0.029157 max=0.029109 Jy/beam
! Clean residual mean=-0.000075 rms=0.011948 Jy/beam
! Combined flux in latest and established models = 2.98987 Jy
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 263 components and 2.98987 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.261759Jy  sigma=1.468907
! Fit after  self-cal, rms=0.261070Jy  sigma=1.456824
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.261070Jy  sigma=1.456824
! Fit after  self-cal, rms=0.261714Jy  sigma=1.443109
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.769 mas, bmaj=12.47 mas, bpa=8.576 degrees
! Estimated noise=1.08948 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0293601 Jy
! Component: 100  -  total flux cleaned = 0.0513367 Jy
! Component: 150  -  total flux cleaned = 0.0618681 Jy
! Component: 200  -  total flux cleaned = 0.0689966 Jy
! Total flux subtracted in 200 components = 0.0689966 Jy
! Clean residual min=-0.018617 max=0.018712 Jy/beam
! Clean residual mean=-0.000044 rms=0.007527 Jy/beam
! Combined flux in latest and established models = 3.05887 Jy
selfcal
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 318 components and 3.05887 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.238951Jy  sigma=1.247364
! Fit after  self-cal, rms=0.238275Jy  sigma=1.243894
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00775501 Jy
! Component: 100  -  total flux cleaned = 0.0167158 Jy
! Component: 150  -  total flux cleaned = 0.0203784 Jy
! Component: 200  -  total flux cleaned = 0.0263289 Jy
! Total flux subtracted in 200 components = 0.0263289 Jy
! Clean residual min=-0.013708 max=0.013653 Jy/beam
! Clean residual mean=-0.000032 rms=0.005441 Jy/beam
! Combined flux in latest and established models = 3.0852 Jy
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 357 components and 3.0852 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.223788Jy  sigma=1.150667
! Fit after  self-cal, rms=0.223298Jy  sigma=1.148845
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.223298Jy  sigma=1.148845
! Fit after  self-cal, rms=0.222292Jy  sigma=1.143785
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.755 mas, bmaj=12.44 mas, bpa=8.385 degrees
! Estimated noise=1.08725 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00413966 Jy
! Component: 100  -  total flux cleaned = 0.00789197 Jy
! Component: 150  -  total flux cleaned = 0.0114785 Jy
! Component: 200  -  total flux cleaned = 0.0135201 Jy
! Total flux subtracted in 200 components = 0.0135201 Jy
! Clean residual min=-0.011028 max=0.011040 Jy/beam
! Clean residual mean=-0.000020 rms=0.004269 Jy/beam
! Combined flux in latest and established models = 3.09872 Jy
selfcal
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 399 components and 3.09872 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.212005Jy  sigma=1.088052
! Fit after  self-cal, rms=0.211678Jy  sigma=1.087212
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00468012 Jy
! Component: 100  -  total flux cleaned = 0.00904469 Jy
! Component: 150  -  total flux cleaned = 0.0132005 Jy
! Component: 200  -  total flux cleaned = 0.0166113 Jy
! Total flux subtracted in 200 components = 0.0166113 Jy
! Clean residual min=-0.009289 max=0.009260 Jy/beam
! Clean residual mean=-0.000016 rms=0.003542 Jy/beam
! Combined flux in latest and established models = 3.11533 Jy
! Performing phase self-cal
! Adding 63 model components to the UV plane model.
! The established model now contains 438 components and 3.11533 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.203377Jy  sigma=1.049718
! Fit after  self-cal, rms=0.203165Jy  sigma=1.048946
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.203165Jy  sigma=1.048946
! Fit after  self-cal, rms=0.202270Jy  sigma=1.045560
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.93 mas, bmaj=15.73 mas, bpa=29.11 degrees
! Estimated noise=0.845136 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00335593 Jy
! Component: 100  -  total flux cleaned = 0.00594386 Jy
! Component: 150  -  total flux cleaned = 0.0108055 Jy
! Component: 200  -  total flux cleaned = 0.0144514 Jy
! Total flux subtracted in 200 components = 0.0144514 Jy
! Clean residual min=-0.007382 max=0.007359 Jy/beam
! Clean residual mean=-0.000004 rms=0.002818 Jy/beam
! Combined flux in latest and established models = 3.12978 Jy
selfcal
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 495 components and 3.12978 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.198235Jy  sigma=1.014112
! Fit after  self-cal, rms=0.198179Jy  sigma=1.013304
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00230164 Jy
! Component: 100  -  total flux cleaned = 0.00525028 Jy
! Component: 150  -  total flux cleaned = 0.00684569 Jy
! Component: 200  -  total flux cleaned = 0.00836969 Jy
! Total flux subtracted in 200 components = 0.00836969 Jy
! Clean residual min=-0.006298 max=0.006230 Jy/beam
! Clean residual mean=-0.000003 rms=0.002350 Jy/beam
! Combined flux in latest and established models = 3.13815 Jy
! Performing phase self-cal
! Adding 56 model components to the UV plane model.
! The established model now contains 531 components and 3.13815 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.194944Jy  sigma=0.991939
! Fit after  self-cal, rms=0.194932Jy  sigma=0.991438
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=6.74 mas, bmaj=12.42 mas, bpa=8.287 degrees
! Estimated noise=1.08513 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.74 x 12.42 at 8.287 degrees (North through East)
! Clean map  min=-0.079985  max=1.1903 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.194932Jy  sigma=0.991438
! Fit after  self-cal, rms=0.198561Jy  sigma=0.770028
! Inverting map and beam 
! Estimated beam: bmin=6.725 mas, bmaj=12.41 mas, bpa=8.293 degrees
! Estimated noise=1.08408 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00331236 Jy
! Component: 100  -  total flux cleaned = -0.00638403 Jy
! Component: 150  -  total flux cleaned = -0.00761875 Jy
! Component: 200  -  total flux cleaned = -0.00642707 Jy
! Total flux subtracted in 200 components = -0.00642707 Jy
! Clean residual min=-0.006568 max=0.006574 Jy/beam
! Clean residual mean=-0.000011 rms=0.002316 Jy/beam
! Combined flux in latest and established models = 3.13172 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 568 components and 3.13172 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.192615Jy  sigma=0.751208
! Fit after  self-cal, rms=0.192483Jy  sigma=0.750475
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.08062e-05 Jy
! Component: 100  -  total flux cleaned = 0.000345255 Jy
! Component: 150  -  total flux cleaned = 0.00145014 Jy
! Component: 200  -  total flux cleaned = 0.00288448 Jy
! Total flux subtracted in 200 components = 0.00288448 Jy
! Clean residual min=-0.005922 max=0.005926 Jy/beam
! Clean residual mean=-0.000008 rms=0.002122 Jy/beam
! Combined flux in latest and established models = 3.13461 Jy
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 599 components and 3.13461 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.187725Jy  sigma=0.735561
! Fit after  self-cal, rms=0.187676Jy  sigma=0.735051
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.187676Jy  sigma=0.735051
! Fit after  self-cal, rms=0.186544Jy  sigma=0.734218
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.492 mas, bmaj=10.15 mas, bpa=5.928 degrees
! Estimated noise=3.61649 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.14097 Jy
! Component: 100  -  total flux cleaned = 1.68936 Jy
! Component: 150  -  total flux cleaned = 1.94662 Jy
! Component: 200  -  total flux cleaned = 2.10796 Jy
! Total flux subtracted in 200 components = 2.10796 Jy
! Clean residual min=-0.156547 max=0.156521 Jy/beam
! Clean residual mean=0.000547 rms=0.060308 Jy/beam
! Combined flux in latest and established models = 2.10796 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 117 model components to the UV plane model.
! The established model now contains 117 components and 2.10796 Jy
! Inverting map and beam 
! Estimated beam: bmin=6.729 mas, bmaj=12.41 mas, bpa=8.26 degrees
! Estimated noise=1.08275 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.366593 Jy
! Component: 100  -  total flux cleaned = 0.474697 Jy
! Component: 150  -  total flux cleaned = 0.549497 Jy
! Component: 200  -  total flux cleaned = 0.584991 Jy
! Total flux subtracted in 200 components = 0.584991 Jy
! Clean residual min=-0.074263 max=0.074083 Jy/beam
! Clean residual mean=0.000474 rms=0.031648 Jy/beam
! Combined flux in latest and established models = 2.69295 Jy
! Adding 138 model components to the UV plane model.
! The established model now contains 245 components and 2.69295 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.93 mas, bmaj=15.72 mas, bpa=29.12 degrees
! Estimated noise=0.843809 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0409638 Jy
! Component: 100  -  total flux cleaned = 0.0801977 Jy
! Component: 150  -  total flux cleaned = 0.0968244 Jy
! Component: 200  -  total flux cleaned = 0.100857 Jy
! Total flux subtracted in 200 components = 0.100857 Jy
! Clean residual min=-0.028039 max=0.027982 Jy/beam
! Clean residual mean=0.000167 rms=0.012340 Jy/beam
! Combined flux in latest and established models = 2.79381 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00273209 Jy
! Component: 100  -  total flux cleaned = 0.00881992 Jy
! Component: 150  -  total flux cleaned = 0.0107876 Jy
! Component: 200  -  total flux cleaned = 0.0135641 Jy
! Total flux subtracted in 200 components = 0.0135641 Jy
! Clean residual min=-0.015335 max=0.015166 Jy/beam
! Clean residual mean=0.000102 rms=0.006203 Jy/beam
! Combined flux in latest and established models = 2.80738 Jy
! Adding 140 model components to the UV plane model.
! The established model now contains 380 components and 2.80738 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=6.729 mas, bmaj=12.41 mas, bpa=8.26 degrees
! Estimated noise=1.08275 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00886211 Jy
! Component: 100  -  total flux cleaned = 0.0152858 Jy
! Component: 150  -  total flux cleaned = 0.0205414 Jy
! Component: 200  -  total flux cleaned = 0.0234015 Jy
! Total flux subtracted in 200 components = 0.0234015 Jy
! Clean residual min=-0.011630 max=0.011581 Jy/beam
! Clean residual mean=0.000004 rms=0.004128 Jy/beam
! Combined flux in latest and established models = 2.83078 Jy
selfcal
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 429 components and 2.83078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.238944Jy  sigma=0.902494
! Fit after  self-cal, rms=0.235522Jy  sigma=0.877639
wmodel /g0/scr/pima/npcsc_uvs/J0410+7656_S_map.mod
! Writing 429 model components to file: /g0/scr/pima/npcsc_uvs/J0410+7656_S_map.mod
wobs /g0/scr/pima/npcsc_uvs/J0410+7656_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J0410+7656_S_uvs.fits
wwins /g0/scr/pima/npcsc_uvs/J0410+7656_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/g0/scr/pima/npcsc_uvs/J0410+7656_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.729 x 12.41 at 8.26 degrees (North through East)
! Clean map  min=-0.069776  max=1.1556 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J0410+7656_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.15564 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00395251 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.02606 1.02606 2.05212 4.10424 8.20849 16.417 32.8339 65.6679
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0118 
print "peak=",int(1000*peak_flux)/1000
! peak= 1.155 
quit
! Quitting program
! Log file /g0/scr/pima/npcsc_uvs/J0410+7656_S_uvs.log closed on Sun Oct  6 14:26:36 2013