! Started logfile: /g0/scr/pima/npcsc_uvs/J0339-0146_S_uvs.log on Sun Oct  6 14:26:21 2013
obs /g0/scr/pima/npcsc_uvs/J0339-0146_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J0339-0146_S_uva.fits
! AN table 1: 7 integrations on 45 of 45 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0339-0146
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1260 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J0339-0146_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=2.429177Jy  sigma=43.036454
! Fit after  self-cal, rms=1.212912Jy  sigma=22.433503
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.087 mas, bmaj=7.335 mas, bpa=-0.9118 degrees
! Estimated noise=1.65378 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.62457 Jy
! Component: 100  -  total flux cleaned = 2.09754 Jy
! Total flux subtracted in 100 components = 2.09754 Jy
! Clean residual min=-0.081265 max=0.202832 Jy/beam
! Clean residual mean=0.000108 rms=0.029149 Jy/beam
! Combined flux in latest and established models = 2.09754 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 2.09754 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.426266Jy  sigma=7.588287
! Fit after  self-cal, rms=0.426402Jy  sigma=7.587633
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.216236 Jy
! Component: 100  -  total flux cleaned = 0.322284 Jy
! Total flux subtracted in 100 components = 0.322284 Jy
! Clean residual min=-0.073002 max=0.056639 Jy/beam
! Clean residual mean=0.000016 rms=0.014578 Jy/beam
! Combined flux in latest and established models = 2.41982 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 17 components and 2.41982 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.294300Jy  sigma=5.051729
! Fit after  self-cal, rms=0.294208Jy  sigma=5.050671
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.606 mas, bmaj=8.218 mas, bpa=0.9149 degrees
! Estimated noise=1.2922 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0780666 Jy
! Component: 100  -  total flux cleaned = 0.116065 Jy
! Component: 150  -  total flux cleaned = 0.137368 Jy
! Component: 200  -  total flux cleaned = 0.150616 Jy
! Total flux subtracted in 200 components = 0.150616 Jy
! Clean residual min=-0.068379 max=0.049448 Jy/beam
! Clean residual mean=0.000003 rms=0.014833 Jy/beam
! Combined flux in latest and established models = 2.57044 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 55 components and 2.57044 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.275478Jy  sigma=4.728005
! Fit after  self-cal, rms=0.275438Jy  sigma=4.727652
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        0.98     KP        0.98     
!   LA        1.11     MK        0.91     NL        0.99     OV        1.01     
!   PT        1.07     SC        0.94     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        1.00     KP        0.99     
!   LA        1.06     MK        0.97     NL        1.00     OV        1.01     
!   PT        1.01     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.07     HN        1.04     KP        1.00     
!   LA        0.87     MK        1.10     NL        1.11     OV        1.05     
!   PT        1.10     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.08     HN        0.99     KP        0.92     
!   LA        0.75     MK        1.09     NL        1.04     OV        0.87     
!   PT        0.98     SC        1.09     
! 
! 
! Fit before self-cal, rms=0.275438Jy  sigma=4.727652
! Fit after  self-cal, rms=0.101385Jy  sigma=1.360524
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.614 mas, bmaj=8.248 mas, bpa=1.038 degrees
! Estimated noise=1.29179 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (20, 11).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0156283 Jy
! Component: 100  -  total flux cleaned = 0.0173438 Jy
! Component: 150  -  total flux cleaned = 0.0180285 Jy
! Component: 200  -  total flux cleaned = 0.0182325 Jy
! Total flux subtracted in 200 components = 0.0182325 Jy
! Clean residual min=-0.008565 max=0.009325 Jy/beam
! Clean residual mean=-0.000002 rms=0.002238 Jy/beam
! Combined flux in latest and established models = 2.58867 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 75 components and 2.58867 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097984Jy  sigma=1.311129
! Fit after  self-cal, rms=0.097995Jy  sigma=1.308662
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097995Jy  sigma=1.308662
! Fit after  self-cal, rms=0.097924Jy  sigma=1.306500
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.615 mas, bmaj=8.249 mas, bpa=1.052 degrees
! Estimated noise=1.29149 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000270702 Jy
! Component: 100  -  total flux cleaned = -0.00027677 Jy
! Component: 150  -  total flux cleaned = -0.000600992 Jy
! Component: 200  -  total flux cleaned = -0.000899151 Jy
! Total flux subtracted in 200 components = -0.000899151 Jy
! Clean residual min=-0.007585 max=0.008297 Jy/beam
! Clean residual mean=-0.000001 rms=0.002018 Jy/beam
! Combined flux in latest and established models = 2.58777 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 87 components and 2.58777 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096958Jy  sigma=1.297877
! Fit after  self-cal, rms=0.096951Jy  sigma=1.297461
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000380259 Jy
! Component: 100  -  total flux cleaned = -0.000645317 Jy
! Component: 150  -  total flux cleaned = -0.00102422 Jy
! Component: 200  -  total flux cleaned = -0.0012638 Jy
! Total flux subtracted in 200 components = -0.0012638 Jy
! Clean residual min=-0.007461 max=0.007891 Jy/beam
! Clean residual mean=-0.000000 rms=0.001951 Jy/beam
! Combined flux in latest and established models = 2.5865 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 96 components and 2.5865 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096339Jy  sigma=1.293615
! Fit after  self-cal, rms=0.096338Jy  sigma=1.293457
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096338Jy  sigma=1.293457
! Fit after  self-cal, rms=0.096264Jy  sigma=1.292625
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.616 mas, bmaj=8.252 mas, bpa=1.064 degrees
! Estimated noise=1.29121 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00129118 Jy
! Component: 100  -  total flux cleaned = -0.00164499 Jy
! Component: 150  -  total flux cleaned = -0.00186487 Jy
! Component: 200  -  total flux cleaned = -0.00207632 Jy
! Total flux subtracted in 200 components = -0.00207632 Jy
! Clean residual min=-0.007561 max=0.007671 Jy/beam
! Clean residual mean=-0.000001 rms=0.001885 Jy/beam
! Combined flux in latest and established models = 2.58443 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 101 components and 2.58443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095698Jy  sigma=1.289696
! Fit after  self-cal, rms=0.095691Jy  sigma=1.289581
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00034022 Jy
! Component: 100  -  total flux cleaned = -0.000538201 Jy
! Component: 150  -  total flux cleaned = -0.000728258 Jy
! Component: 200  -  total flux cleaned = -0.0010077 Jy
! Total flux subtracted in 200 components = -0.0010077 Jy
! Clean residual min=-0.007385 max=0.007482 Jy/beam
! Clean residual mean=-0.000001 rms=0.001857 Jy/beam
! Combined flux in latest and established models = 2.58342 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 108 components and 2.58342 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095237Jy  sigma=1.287865
! Fit after  self-cal, rms=0.095234Jy  sigma=1.287812
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095234Jy  sigma=1.287812
! Fit after  self-cal, rms=0.095200Jy  sigma=1.287419
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.033 mas, bmaj=12.81 mas, bpa=1.898 degrees
! Estimated noise=1.38058 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00250673 Jy
! Component: 100  -  total flux cleaned = -0.00273592 Jy
! Component: 150  -  total flux cleaned = -0.00268283 Jy
! Component: 200  -  total flux cleaned = -0.00263702 Jy
! Total flux subtracted in 200 components = -0.00263702 Jy
! Clean residual min=-0.007814 max=0.008250 Jy/beam
! Clean residual mean=-0.000003 rms=0.002250 Jy/beam
! Combined flux in latest and established models = 2.58078 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 127 components and 2.58078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095142Jy  sigma=1.286151
! Fit after  self-cal, rms=0.095089Jy  sigma=1.285783
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.38856e-05 Jy
! Component: 100  -  total flux cleaned = -0.000320075 Jy
! Component: 150  -  total flux cleaned = -0.000365597 Jy
! Component: 200  -  total flux cleaned = -0.000329335 Jy
! Total flux subtracted in 200 components = -0.000329335 Jy
! Clean residual min=-0.007753 max=0.008154 Jy/beam
! Clean residual mean=-0.000003 rms=0.002242 Jy/beam
! Combined flux in latest and established models = 2.58045 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 132 components and 2.58045 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095152Jy  sigma=1.285240
! Fit after  self-cal, rms=0.095111Jy  sigma=1.284914
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.617 mas, bmaj=8.253 mas, bpa=1.082 degrees
! Estimated noise=1.29075 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.617 x 8.253 at 1.082 degrees (North through East)
! Clean map  min=-0.0080575  max=2.1655 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095111Jy  sigma=1.284914
! Fit after  self-cal, rms=0.091476Jy  sigma=1.205352
! Inverting map and beam 
! Estimated beam: bmin=3.618 mas, bmaj=8.256 mas, bpa=1.054 degrees
! Estimated noise=1.2905 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00191153 Jy
! Component: 100  -  total flux cleaned = -0.00235821 Jy
! Component: 150  -  total flux cleaned = -0.00260949 Jy
! Component: 200  -  total flux cleaned = -0.00276925 Jy
! Total flux subtracted in 200 components = -0.00276925 Jy
! Clean residual min=-0.007425 max=0.006987 Jy/beam
! Clean residual mean=-0.000002 rms=0.001766 Jy/beam
! Combined flux in latest and established models = 2.57768 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 143 components and 2.57768 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091050Jy  sigma=1.203978
! Fit after  self-cal, rms=0.091045Jy  sigma=1.203931
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000234239 Jy
! Component: 100  -  total flux cleaned = -0.000465289 Jy
! Component: 150  -  total flux cleaned = -0.000616248 Jy
! Component: 200  -  total flux cleaned = -0.000764195 Jy
! Total flux subtracted in 200 components = -0.000764195 Jy
! Clean residual min=-0.007242 max=0.006922 Jy/beam
! Clean residual mean=-0.000002 rms=0.001754 Jy/beam
! Combined flux in latest and established models = 2.57692 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 146 components and 2.57692 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090706Jy  sigma=1.203092
! Fit after  self-cal, rms=0.090701Jy  sigma=1.203059
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090701Jy  sigma=1.203059
! Fit after  self-cal, rms=0.090666Jy  sigma=1.202767
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.09 mas, bmaj=7.362 mas, bpa=-0.8231 degrees
! Estimated noise=1.66534 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.63603 Jy
! Component: 100  -  total flux cleaned = 2.11037 Jy
! Component: 150  -  total flux cleaned = 2.32666 Jy
! Component: 200  -  total flux cleaned = 2.43223 Jy
! Total flux subtracted in 200 components = 2.43223 Jy
! Clean residual min=-0.023642 max=0.048144 Jy/beam
! Clean residual mean=0.000036 rms=0.007592 Jy/beam
! Combined flux in latest and established models = 2.43223 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 2.43223 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.619 mas, bmaj=8.257 mas, bpa=1.07 degrees
! Estimated noise=1.29016 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0604545 Jy
! Component: 100  -  total flux cleaned = 0.0898109 Jy
! Component: 150  -  total flux cleaned = 0.108318 Jy
! Component: 200  -  total flux cleaned = 0.120967 Jy
! Total flux subtracted in 200 components = 0.120967 Jy
! Clean residual min=-0.009582 max=0.010322 Jy/beam
! Clean residual mean=0.000008 rms=0.002444 Jy/beam
! Combined flux in latest and established models = 2.5532 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 38 components and 2.5532 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.035 mas, bmaj=12.81 mas, bpa=1.885 degrees
! Estimated noise=1.3792 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0107636 Jy
! Component: 100  -  total flux cleaned = 0.0159043 Jy
! Component: 150  -  total flux cleaned = 0.0179421 Jy
! Component: 200  -  total flux cleaned = 0.0189682 Jy
! Total flux subtracted in 200 components = 0.0189682 Jy
! Clean residual min=-0.007696 max=0.008864 Jy/beam
! Clean residual mean=0.000000 rms=0.002273 Jy/beam
! Combined flux in latest and established models = 2.57216 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000626934 Jy
! Component: 100  -  total flux cleaned = 0.00127734 Jy
! Component: 150  -  total flux cleaned = 0.00174811 Jy
! Component: 200  -  total flux cleaned = 0.0021617 Jy
! Total flux subtracted in 200 components = 0.0021617 Jy
! Clean residual min=-0.007515 max=0.008682 Jy/beam
! Clean residual mean=-0.000002 rms=0.002194 Jy/beam
! Combined flux in latest and established models = 2.57433 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 96 components and 2.57433 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.619 mas, bmaj=8.257 mas, bpa=1.07 degrees
! Estimated noise=1.29016 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000836249 Jy
! Component: 100  -  total flux cleaned = 0.000630582 Jy
! Component: 150  -  total flux cleaned = 0.000639602 Jy
! Component: 200  -  total flux cleaned = 0.000467926 Jy
! Total flux subtracted in 200 components = 0.000467926 Jy
! Clean residual min=-0.007502 max=0.008109 Jy/beam
! Clean residual mean=-0.000002 rms=0.001896 Jy/beam
! Combined flux in latest and established models = 2.57479 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 113 components and 2.57479 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095783Jy  sigma=1.215056
! Fit after  self-cal, rms=0.095740Jy  sigma=1.214686
wmodel /g0/scr/pima/npcsc_uvs/J0339-0146_S_map.mod
! Writing 113 model components to file: /g0/scr/pima/npcsc_uvs/J0339-0146_S_map.mod
wobs /g0/scr/pima/npcsc_uvs/J0339-0146_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J0339-0146_S_uvs.fits
wwins /g0/scr/pima/npcsc_uvs/J0339-0146_S_map.win
! wwins: Wrote 2 windows to /g0/scr/pima/npcsc_uvs/J0339-0146_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000333212 Jy
! Component: 100  -  total flux cleaned = 0.000198472 Jy
! Component: 150  -  total flux cleaned = 8.56463e-05 Jy
! Component: 200  -  total flux cleaned = -2.20973e-05 Jy
! Component: 250  -  total flux cleaned = -0.000447303 Jy
! Component: 300  -  total flux cleaned = -0.00116139 Jy
! Component: 350  -  total flux cleaned = -0.00175183 Jy
! Component: 400  -  total flux cleaned = -0.00241709 Jy
! Component: 450  -  total flux cleaned = -0.00278554 Jy
! Component: 500  -  total flux cleaned = -0.00341398 Jy
! Component: 550  -  total flux cleaned = -0.00411589 Jy
! Component: 600  -  total flux cleaned = -0.00488388 Jy
! Component: 650  -  total flux cleaned = -0.00546708 Jy
! Component: 700  -  total flux cleaned = -0.00619987 Jy
! Component: 750  -  total flux cleaned = -0.00691582 Jy
! Component: 800  -  total flux cleaned = -0.00769279 Jy
! Component: 850  -  total flux cleaned = -0.00837715 Jy
! Component: 900  -  total flux cleaned = -0.0090453 Jy
! Component: 950  -  total flux cleaned = -0.00969993 Jy
! Component: 1000  -  total flux cleaned = -0.0102687 Jy
! Component: 1050  -  total flux cleaned = -0.0107585 Jy
! Component: 1100  -  total flux cleaned = -0.0115815 Jy
! Component: 1150  -  total flux cleaned = -0.0121182 Jy
! Component: 1200  -  total flux cleaned = -0.0126472 Jy
! Component: 1250  -  total flux cleaned = -0.0132963 Jy
! Component: 1300  -  total flux cleaned = -0.0136145 Jy
! Component: 1350  -  total flux cleaned = -0.0139909 Jy
! Component: 1400  -  total flux cleaned = -0.0144869 Jy
! Component: 1450  -  total flux cleaned = -0.0150354 Jy
! Component: 1500  -  total flux cleaned = -0.0155161 Jy
! Component: 1550  -  total flux cleaned = -0.015873 Jy
! Component: 1600  -  total flux cleaned = -0.0162833 Jy
! Component: 1650  -  total flux cleaned = -0.0168036 Jy
! Component: 1700  -  total flux cleaned = -0.0170314 Jy
! Component: 1750  -  total flux cleaned = -0.0173696 Jy
! Component: 1800  -  total flux cleaned = -0.0178151 Jy
! Component: 1850  -  total flux cleaned = -0.0179793 Jy
! Component: 1900  -  total flux cleaned = -0.0180886 Jy
! Component: 1950  -  total flux cleaned = -0.0184124 Jy
! Component: 2000  -  total flux cleaned = -0.0187321 Jy
! Component: 2050  -  total flux cleaned = -0.019259 Jy
! Component: 2100  -  total flux cleaned = -0.0195719 Jy
! Component: 2150  -  total flux cleaned = -0.0199851 Jy
! Component: 2200  -  total flux cleaned = -0.0201389 Jy
! Component: 2250  -  total flux cleaned = -0.0206963 Jy
! Component: 2300  -  total flux cleaned = -0.0211476 Jy
! Component: 2350  -  total flux cleaned = -0.0214454 Jy
! Component: 2400  -  total flux cleaned = -0.0217409 Jy
! Component: 2450  -  total flux cleaned = -0.022229 Jy
! Component: 2500  -  total flux cleaned = -0.0225676 Jy
! Component: 2550  -  total flux cleaned = -0.0229033 Jy
! Component: 2600  -  total flux cleaned = -0.0233317 Jy
! Component: 2650  -  total flux cleaned = -0.0237093 Jy
! Component: 2700  -  total flux cleaned = -0.0241769 Jy
! Component: 2750  -  total flux cleaned = -0.0244555 Jy
! Component: 2800  -  total flux cleaned = -0.0248689 Jy
! Component: 2850  -  total flux cleaned = -0.0250964 Jy
! Component: 2900  -  total flux cleaned = -0.0253227 Jy
! Component: 2950  -  total flux cleaned = -0.0256827 Jy
! Component: 3000  -  total flux cleaned = -0.0260398 Jy
! Component: 3050  -  total flux cleaned = -0.0262169 Jy
! Component: 3100  -  total flux cleaned = -0.0264813 Jy
! Component: 3150  -  total flux cleaned = -0.0267871 Jy
! Component: 3200  -  total flux cleaned = -0.0271344 Jy
! Component: 3250  -  total flux cleaned = -0.0275217 Jy
! Component: 3300  -  total flux cleaned = -0.0278634 Jy
! Component: 3350  -  total flux cleaned = -0.0280332 Jy
! Component: 3400  -  total flux cleaned = -0.0284124 Jy
! Component: 3450  -  total flux cleaned = -0.0287059 Jy
! Component: 3500  -  total flux cleaned = -0.0288309 Jy
! Component: 3550  -  total flux cleaned = -0.0291205 Jy
! Component: 3600  -  total flux cleaned = -0.0290386 Jy
! Component: 3650  -  total flux cleaned = -0.0292836 Jy
! Component: 3700  -  total flux cleaned = -0.0293243 Jy
! Component: 3750  -  total flux cleaned = -0.0293646 Jy
! Component: 3800  -  total flux cleaned = -0.0294451 Jy
! Component: 3850  -  total flux cleaned = -0.0294051 Jy
! Component: 3900  -  total flux cleaned = -0.0295244 Jy
! Component: 3950  -  total flux cleaned = -0.0295636 Jy
! Component: 4000  -  total flux cleaned = -0.0296423 Jy
! Component: 4050  -  total flux cleaned = -0.0296418 Jy
! Total flux subtracted in 4096 components = -0.029564 Jy
! Clean residual min=-0.002236 max=0.002009 Jy/beam
! Clean residual mean=0.000000 rms=0.000685 Jy/beam
! Combined flux in latest and established models = 2.54523 Jy
keep
! Adding 280 model components to the UV plane model.
! The established model now contains 393 components and 2.54523 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsc_uvs/J0339-0146_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.619 x 8.257 at 1.07 degrees (North through East)
! Clean map  min=-0.0052236  max=2.1661 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J0339-0146_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 2.1661 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000678758 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0940065 0.0940065 0.188013 0.376026 0.752052 1.5041 3.00821 6.01641 12.0328 24.0657 48.1313 96.2626
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.002 
print "peak=",int(1000*peak_flux)/1000
! peak= 2.166 
quit
! Quitting program
! Log file /g0/scr/pima/npcsc_uvs/J0339-0146_S_uvs.log closed on Sun Oct  6 14:26:25 2013