! Started logfile: /g0/scr/pima/npcsc_uvs/J0336+3218_S_uvs.log on Sun Oct  6 14:26:14 2013
obs /g0/scr/pima/npcsc_uvs/J0336+3218_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J0336+3218_S_uva.fits
! AN table 1: 12 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.798148 visibilities/baseline/integration-bin.
! Found source: J0336+3218
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1724 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J0336+3218_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.044753Jy  sigma=37.262207
! Fit after  self-cal, rms=1.058291Jy  sigma=18.608660
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.43 mas, bmaj=9.01 mas, bpa=-29.16 degrees
! Estimated noise=2.18919 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.5, 0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.42799 Jy
! Component: 100  -  total flux cleaned = 1.95419 Jy
! Total flux subtracted in 100 components = 1.95419 Jy
! Clean residual min=-0.105633 max=0.217752 Jy/beam
! Clean residual mean=0.000112 rms=0.040682 Jy/beam
! Combined flux in latest and established models = 1.95419 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 1.95419 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.425362Jy  sigma=7.635143
! Fit after  self-cal, rms=0.405541Jy  sigma=7.602607
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.331 mas, bmaj=10.55 mas, bpa=-31.25 degrees
! Estimated noise=1.38265 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.285006 Jy
! Component: 100  -  total flux cleaned = 0.424331 Jy
! Component: 150  -  total flux cleaned = 0.50211 Jy
! Component: 200  -  total flux cleaned = 0.548778 Jy
! Total flux subtracted in 200 components = 0.548778 Jy
! Clean residual min=-0.082616 max=0.070486 Jy/beam
! Clean residual mean=-0.000045 rms=0.019209 Jy/beam
! Combined flux in latest and established models = 2.50297 Jy
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 65 components and 2.50297 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.267191Jy  sigma=4.383741
! Fit after  self-cal, rms=0.267660Jy  sigma=4.377686
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.98     KP        0.96     
!   LA        1.09     MK        0.95     NL        0.97     OV        1.00     
!   PT        1.06     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        1.00     KP        0.97     
!   LA        1.05     MK        1.01     NL        0.98     OV        1.02     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.50     FD        1.07     HN        1.04     KP        0.99     
!   LA        0.86     MK        1.16     NL        1.09     OV        1.07     
!   PT        1.10     SC        1.06     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.08     HN        0.98     KP        0.93     
!   LA        0.75     MK        1.13     NL        1.03     OV        0.90     
!   PT        0.96     SC        1.10     
! 
! 
! Fit before self-cal, rms=0.267660Jy  sigma=4.377686
! Fit after  self-cal, rms=0.149117Jy  sigma=1.526171
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.427 mas, bmaj=10.81 mas, bpa=-31.71 degrees
! Estimated noise=1.39426 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (8.5, -12).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0355898 Jy
! Component: 100  -  total flux cleaned = 0.0405502 Jy
! Component: 150  -  total flux cleaned = 0.0398249 Jy
! Component: 200  -  total flux cleaned = 0.040468 Jy
! Total flux subtracted in 200 components = 0.040468 Jy
! Clean residual min=-0.015328 max=0.022660 Jy/beam
! Clean residual mean=0.000000 rms=0.004880 Jy/beam
! Combined flux in latest and established models = 2.54344 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 87 components and 2.54344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124732Jy  sigma=1.264954
! Fit after  self-cal, rms=0.123631Jy  sigma=1.244809
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.123631Jy  sigma=1.244809
! Fit after  self-cal, rms=0.121782Jy  sigma=1.229788
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.419 mas, bmaj=10.79 mas, bpa=-31.63 degrees
! Estimated noise=1.38743 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00939416 Jy
! Component: 100  -  total flux cleaned = 0.011784 Jy
! Component: 150  -  total flux cleaned = 0.0112991 Jy
! Component: 200  -  total flux cleaned = 0.0108607 Jy
! Total flux subtracted in 200 components = 0.0108607 Jy
! Clean residual min=-0.011944 max=0.015648 Jy/beam
! Clean residual mean=-0.000002 rms=0.003764 Jy/beam
! Combined flux in latest and established models = 2.5543 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 101 components and 2.5543 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111364Jy  sigma=1.173245
! Fit after  self-cal, rms=0.111040Jy  sigma=1.169478
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0034693 Jy
! Component: 100  -  total flux cleaned = 0.00244415 Jy
! Component: 150  -  total flux cleaned = 0.00211184 Jy
! Component: 200  -  total flux cleaned = 0.00181742 Jy
! Total flux subtracted in 200 components = 0.00181742 Jy
! Clean residual min=-0.011579 max=0.014108 Jy/beam
! Clean residual mean=-0.000001 rms=0.003494 Jy/beam
! Combined flux in latest and established models = 2.55612 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 111 components and 2.55612 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106587Jy  sigma=1.151069
! Fit after  self-cal, rms=0.106498Jy  sigma=1.150294
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106498Jy  sigma=1.150294
! Fit after  self-cal, rms=0.105513Jy  sigma=1.141498
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.418 mas, bmaj=10.78 mas, bpa=-31.55 degrees
! Estimated noise=1.38354 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000119974 Jy
! Component: 100  -  total flux cleaned = -0.000185825 Jy
! Component: 150  -  total flux cleaned = -0.000477462 Jy
! Component: 200  -  total flux cleaned = -0.000958863 Jy
! Total flux subtracted in 200 components = -0.000958863 Jy
! Clean residual min=-0.009935 max=0.012981 Jy/beam
! Clean residual mean=-0.000002 rms=0.003102 Jy/beam
! Combined flux in latest and established models = 2.55516 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 122 components and 2.55516 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102175Jy  sigma=1.127814
! Fit after  self-cal, rms=0.102085Jy  sigma=1.127157
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000830563 Jy
! Component: 100  -  total flux cleaned = 0.000611038 Jy
! Component: 150  -  total flux cleaned = 0.000612103 Jy
! Component: 200  -  total flux cleaned = 0.000412685 Jy
! Total flux subtracted in 200 components = 0.000412685 Jy
! Clean residual min=-0.009837 max=0.012431 Jy/beam
! Clean residual mean=-0.000000 rms=0.003006 Jy/beam
! Combined flux in latest and established models = 2.55557 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 131 components and 2.55557 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100113Jy  sigma=1.120814
! Fit after  self-cal, rms=0.100054Jy  sigma=1.120493
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100054Jy  sigma=1.120493
! Fit after  self-cal, rms=0.099820Jy  sigma=1.116911
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.587 mas, bmaj=13.47 mas, bpa=-41.88 degrees
! Estimated noise=1.25054 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00363582 Jy
! Component: 100  -  total flux cleaned = -0.00492865 Jy
! Component: 150  -  total flux cleaned = -0.00539481 Jy
! Component: 200  -  total flux cleaned = -0.00540494 Jy
! Total flux subtracted in 200 components = -0.00540494 Jy
! Clean residual min=-0.010286 max=0.013494 Jy/beam
! Clean residual mean=0.000001 rms=0.003645 Jy/beam
! Combined flux in latest and established models = 2.55017 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 145 components and 2.55017 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099603Jy  sigma=1.111580
! Fit after  self-cal, rms=0.099437Jy  sigma=1.111001
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00119598 Jy
! Component: 100  -  total flux cleaned = -0.0011051 Jy
! Component: 150  -  total flux cleaned = -0.00094713 Jy
! Component: 200  -  total flux cleaned = -0.000950087 Jy
! Total flux subtracted in 200 components = -0.000950087 Jy
! Clean residual min=-0.010585 max=0.013177 Jy/beam
! Clean residual mean=0.000003 rms=0.003592 Jy/beam
! Combined flux in latest and established models = 2.54922 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 155 components and 2.54922 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099304Jy  sigma=1.109048
! Fit after  self-cal, rms=0.099149Jy  sigma=1.108903
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.418 mas, bmaj=10.79 mas, bpa=-31.53 degrees
! Estimated noise=1.38154 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.418 x 10.79 at -31.53 degrees (North through East)
! Clean map  min=-0.018788  max=1.781 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099149Jy  sigma=1.108903
! Fit after  self-cal, rms=0.095737Jy  sigma=0.985299
! Inverting map and beam 
! Estimated beam: bmin=4.423 mas, bmaj=10.79 mas, bpa=-31.54 degrees
! Estimated noise=1.3815 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000186639 Jy
! Component: 100  -  total flux cleaned = -0.000732014 Jy
! Component: 150  -  total flux cleaned = -0.00106786 Jy
! Component: 200  -  total flux cleaned = -0.00107196 Jy
! Total flux subtracted in 200 components = -0.00107196 Jy
! Clean residual min=-0.010225 max=0.011209 Jy/beam
! Clean residual mean=-0.000000 rms=0.002665 Jy/beam
! Combined flux in latest and established models = 2.54814 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 172 components and 2.54814 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094142Jy  sigma=0.981334
! Fit after  self-cal, rms=0.094100Jy  sigma=0.981189
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.86552e-05 Jy
! Component: 100  -  total flux cleaned = 2.80737e-05 Jy
! Component: 150  -  total flux cleaned = -0.00012443 Jy
! Component: 200  -  total flux cleaned = -0.000116868 Jy
! Total flux subtracted in 200 components = -0.000116868 Jy
! Clean residual min=-0.010063 max=0.010920 Jy/beam
! Clean residual mean=0.000000 rms=0.002637 Jy/beam
! Combined flux in latest and established models = 2.54803 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 177 components and 2.54803 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092834Jy  sigma=0.978665
! Fit after  self-cal, rms=0.092788Jy  sigma=0.978590
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092788Jy  sigma=0.978590
! Fit after  self-cal, rms=0.092453Jy  sigma=0.977949
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.492 mas, bmaj=9.214 mas, bpa=-29.48 degrees
! Estimated noise=2.20292 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.43088 Jy
! Component: 100  -  total flux cleaned = 1.94584 Jy
! Component: 150  -  total flux cleaned = 2.1596 Jy
! Component: 200  -  total flux cleaned = 2.27084 Jy
! Total flux subtracted in 200 components = 2.27084 Jy
! Clean residual min=-0.037298 max=0.061727 Jy/beam
! Clean residual mean=0.000058 rms=0.013158 Jy/beam
! Combined flux in latest and established models = 2.27084 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 44 model components to the UV plane model.
! The established model now contains 44 components and 2.27084 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.419 mas, bmaj=10.79 mas, bpa=-31.51 degrees
! Estimated noise=1.37996 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0995253 Jy
! Component: 100  -  total flux cleaned = 0.156999 Jy
! Component: 150  -  total flux cleaned = 0.193475 Jy
! Component: 200  -  total flux cleaned = 0.218634 Jy
! Total flux subtracted in 200 components = 0.218634 Jy
! Clean residual min=-0.016332 max=0.018294 Jy/beam
! Clean residual mean=0.000009 rms=0.005377 Jy/beam
! Combined flux in latest and established models = 2.48947 Jy
! Adding 67 model components to the UV plane model.
! The established model now contains 101 components and 2.48947 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.59 mas, bmaj=13.47 mas, bpa=-41.86 degrees
! Estimated noise=1.24867 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0188442 Jy
! Component: 100  -  total flux cleaned = 0.0268828 Jy
! Component: 150  -  total flux cleaned = 0.0328795 Jy
! Component: 200  -  total flux cleaned = 0.0374746 Jy
! Total flux subtracted in 200 components = 0.0374746 Jy
! Clean residual min=-0.011135 max=0.013950 Jy/beam
! Clean residual mean=0.000007 rms=0.004168 Jy/beam
! Combined flux in latest and established models = 2.52695 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00386556 Jy
! Component: 100  -  total flux cleaned = 0.00605613 Jy
! Component: 150  -  total flux cleaned = 0.0074886 Jy
! Component: 200  -  total flux cleaned = 0.00892042 Jy
! Total flux subtracted in 200 components = 0.00892042 Jy
! Clean residual min=-0.010587 max=0.013264 Jy/beam
! Clean residual mean=0.000004 rms=0.003687 Jy/beam
! Combined flux in latest and established models = 2.53587 Jy
! Adding 83 model components to the UV plane model.
! The established model now contains 171 components and 2.53587 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.419 mas, bmaj=10.79 mas, bpa=-31.51 degrees
! Estimated noise=1.37996 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110856 Jy
! Component: 100  -  total flux cleaned = 0.0015447 Jy
! Component: 150  -  total flux cleaned = 0.00214918 Jy
! Component: 200  -  total flux cleaned = 0.00271211 Jy
! Total flux subtracted in 200 components = 0.00271211 Jy
! Clean residual min=-0.009165 max=0.010180 Jy/beam
! Clean residual mean=0.000000 rms=0.002714 Jy/beam
! Combined flux in latest and established models = 2.53858 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 199 components and 2.53858 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089477Jy  sigma=0.980952
! Fit after  self-cal, rms=0.087282Jy  sigma=0.975447
wmodel /g0/scr/pima/npcsc_uvs/J0336+3218_S_map.mod
! Writing 199 model components to file: /g0/scr/pima/npcsc_uvs/J0336+3218_S_map.mod
wobs /g0/scr/pima/npcsc_uvs/J0336+3218_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J0336+3218_S_uvs.fits
wwins /g0/scr/pima/npcsc_uvs/J0336+3218_S_map.win
! wwins: Wrote 2 windows to /g0/scr/pima/npcsc_uvs/J0336+3218_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00223511 Jy
! Component: 100  -  total flux cleaned = 0.00271563 Jy
! Component: 150  -  total flux cleaned = 0.00271599 Jy
! Component: 200  -  total flux cleaned = 0.00284 Jy
! Component: 250  -  total flux cleaned = 0.00271454 Jy
! Component: 300  -  total flux cleaned = 0.00237547 Jy
! Component: 350  -  total flux cleaned = 0.00205924 Jy
! Component: 400  -  total flux cleaned = 0.00155756 Jy
! Component: 450  -  total flux cleaned = 0.000987846 Jy
! Component: 500  -  total flux cleaned = 0.000359159 Jy
! Component: 550  -  total flux cleaned = 0.00018601 Jy
! Component: 600  -  total flux cleaned = -0.000144881 Jy
! Component: 650  -  total flux cleaned = -0.000145693 Jy
! Component: 700  -  total flux cleaned = -0.000226218 Jy
! Component: 750  -  total flux cleaned = -0.00052644 Jy
! Component: 800  -  total flux cleaned = -0.000598362 Jy
! Component: 850  -  total flux cleaned = -0.000317904 Jy
! Component: 900  -  total flux cleaned = -0.000250801 Jy
! Component: 950  -  total flux cleaned = -0.000251179 Jy
! Component: 1000  -  total flux cleaned = -0.00012009 Jy
! Component: 1050  -  total flux cleaned = -5.65624e-05 Jy
! Component: 1100  -  total flux cleaned = -5.65378e-05 Jy
! Component: 1150  -  total flux cleaned = 6.41804e-05 Jy
! Component: 1200  -  total flux cleaned = 4.26578e-06 Jy
! Component: 1250  -  total flux cleaned = -0.000112954 Jy
! Component: 1300  -  total flux cleaned = -0.00017186 Jy
! Component: 1350  -  total flux cleaned = -0.000227025 Jy
! Component: 1400  -  total flux cleaned = -0.000280923 Jy
! Component: 1450  -  total flux cleaned = -0.000279691 Jy
! Component: 1500  -  total flux cleaned = -0.000436916 Jy
! Component: 1550  -  total flux cleaned = -0.000591518 Jy
! Component: 1600  -  total flux cleaned = -0.000794364 Jy
! Component: 1650  -  total flux cleaned = -0.00119271 Jy
! Component: 1700  -  total flux cleaned = -0.00133934 Jy
! Component: 1750  -  total flux cleaned = -0.00138755 Jy
! Component: 1800  -  total flux cleaned = -0.00162507 Jy
! Component: 1850  -  total flux cleaned = -0.00171862 Jy
! Component: 1900  -  total flux cleaned = -0.00194874 Jy
! Component: 1950  -  total flux cleaned = -0.00199343 Jy
! Component: 2000  -  total flux cleaned = -0.00212789 Jy
! Component: 2050  -  total flux cleaned = -0.00226045 Jy
! Component: 2100  -  total flux cleaned = -0.00243463 Jy
! Component: 2150  -  total flux cleaned = -0.00252097 Jy
! Component: 2200  -  total flux cleaned = -0.00273273 Jy
! Component: 2250  -  total flux cleaned = -0.00269088 Jy
! Component: 2300  -  total flux cleaned = -0.00277349 Jy
! Component: 2350  -  total flux cleaned = -0.00277377 Jy
! Component: 2400  -  total flux cleaned = -0.00293553 Jy
! Component: 2450  -  total flux cleaned = -0.0029354 Jy
! Component: 2500  -  total flux cleaned = -0.00305344 Jy
! Component: 2550  -  total flux cleaned = -0.00317009 Jy
! Component: 2600  -  total flux cleaned = -0.00320872 Jy
! Component: 2650  -  total flux cleaned = -0.00336082 Jy
! Component: 2700  -  total flux cleaned = -0.00347388 Jy
! Component: 2750  -  total flux cleaned = -0.00354841 Jy
! Component: 2800  -  total flux cleaned = -0.00365911 Jy
! Component: 2850  -  total flux cleaned = -0.00373196 Jy
! Component: 2900  -  total flux cleaned = -0.00365952 Jy
! Component: 2950  -  total flux cleaned = -0.0038755 Jy
! Component: 3000  -  total flux cleaned = -0.00380442 Jy
! Component: 3050  -  total flux cleaned = -0.00394639 Jy
! Component: 3100  -  total flux cleaned = -0.00419188 Jy
! Component: 3150  -  total flux cleaned = -0.004261 Jy
! Component: 3200  -  total flux cleaned = -0.00426108 Jy
! Component: 3250  -  total flux cleaned = -0.00432957 Jy
! Component: 3300  -  total flux cleaned = -0.00436381 Jy
! Component: 3350  -  total flux cleaned = -0.00449913 Jy
! Component: 3400  -  total flux cleaned = -0.00456612 Jy
! Component: 3450  -  total flux cleaned = -0.00459932 Jy
! Component: 3500  -  total flux cleaned = -0.00459962 Jy
! Component: 3550  -  total flux cleaned = -0.00469862 Jy
! Component: 3600  -  total flux cleaned = -0.00473128 Jy
! Component: 3650  -  total flux cleaned = -0.00469867 Jy
! Component: 3700  -  total flux cleaned = -0.00463411 Jy
! Component: 3750  -  total flux cleaned = -0.00469869 Jy
! Component: 3800  -  total flux cleaned = -0.00466683 Jy
! Component: 3850  -  total flux cleaned = -0.00463522 Jy
! Component: 3900  -  total flux cleaned = -0.0046669 Jy
! Component: 3950  -  total flux cleaned = -0.00466698 Jy
! Component: 4000  -  total flux cleaned = -0.00472951 Jy
! Component: 4050  -  total flux cleaned = -0.00466721 Jy
! Total flux subtracted in 4096 components = -0.00469832 Jy
! Clean residual min=-0.001850 max=0.002237 Jy/beam
! Clean residual mean=0.000002 rms=0.000538 Jy/beam
! Combined flux in latest and established models = 2.53388 Jy
keep
! Adding 245 model components to the UV plane model.
! The established model now contains 442 components and 2.53388 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsc_uvs/J0336+3218_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.419 x 10.79 at -31.51 degrees (North through East)
! Clean map  min=-0.016814  max=1.781 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J0336+3218_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.781 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000529378 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0891711 0.0891711 0.178342 0.356685 0.713369 1.42674 2.85348 5.70695 11.4139 22.8278 45.6556 91.3112
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0015 
print "peak=",int(1000*peak_flux)/1000
! peak= 1.78 
quit
! Quitting program
! Log file /g0/scr/pima/npcsc_uvs/J0336+3218_S_uvs.log closed on Sun Oct  6 14:26:19 2013