! Started logfile: /g0/scr/pima/npcsc_uvs/J0330+7633_X_uvs.log on Sun Oct 6 14:22:43 2013 obs /g0/scr/pima/npcsc_uvs/J0330+7633_X_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J0330+7633_X_uva.fits ! AN table 1: 47 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.466667 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0330+7633 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 1316 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J0330+7633_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.005037Jy sigma=0.746224 ! Fit after self-cal, rms=0.943228Jy sigma=0.668040 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.961 mas, bmaj=10.92 mas, bpa=15.97 degrees ! Estimated noise=63.2276 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0674545 Jy ! Component: 100 - total flux cleaned = 0.0782478 Jy ! Total flux subtracted in 100 components = 0.0782478 Jy ! Clean residual min=-0.006373 max=0.006371 Jy/beam ! Clean residual mean=0.000008 rms=0.002983 Jy/beam ! Combined flux in latest and established models = 0.0782478 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0782478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063790Jy sigma=0.045851 ! Fit after self-cal, rms=0.062710Jy sigma=0.045307 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.369 mas, bmaj=9.183 mas, bpa=15.76 degrees ! Estimated noise=35.2152 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128178 Jy ! Component: 100 - total flux cleaned = 0.00112305 Jy ! Component: 150 - total flux cleaned = -0.00033031 Jy ! Component: 200 - total flux cleaned = -0.00070754 Jy ! Total flux subtracted in 200 components = -0.00070754 Jy ! Clean residual min=-0.001534 max=0.001526 Jy/beam ! Clean residual mean=-0.000003 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.0775403 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 72 components and 0.0775403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063914Jy sigma=0.043910 ! Fit after self-cal, rms=0.063755Jy sigma=0.043851 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 0.88 LA 0.99 ! OV 0.89 PT 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 0.93 LA 0.88 ! OV 1.02 PT 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 0.83 LA 0.88 ! OV 0.88 PT 0.89 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 0.95 LA 0.89 ! OV 0.90 PT 0.94 ! ! ! Fit before self-cal, rms=0.063755Jy sigma=0.043851 ! Fit after self-cal, rms=0.059593Jy sigma=0.041248 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.382 mas, bmaj=9.142 mas, bpa=15.72 degrees ! Estimated noise=28.9531 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0122083 Jy ! Component: 100 - total flux cleaned = -0.0124582 Jy ! Component: 150 - total flux cleaned = -0.0126658 Jy ! Component: 200 - total flux cleaned = -0.0134489 Jy ! Total flux subtracted in 200 components = -0.0134489 Jy ! Clean residual min=-0.000938 max=0.000949 Jy/beam ! Clean residual mean=-0.000003 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 0.0640913 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 118 components and 0.0640913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052139Jy sigma=0.043494 ! Fit after self-cal, rms=0.052115Jy sigma=0.043465 ! Inverting map ! Added new window around map position (-37.2, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000952436 Jy ! Component: 100 - total flux cleaned = 0.000874528 Jy ! Component: 150 - total flux cleaned = 0.000695154 Jy ! Component: 200 - total flux cleaned = 0.000580217 Jy ! Total flux subtracted in 200 components = 0.000580217 Jy ! Clean residual min=-0.001025 max=0.001063 Jy/beam ! Clean residual mean=-0.000002 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.0646715 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 160 components and 0.0646715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051987Jy sigma=0.043533 ! Fit after self-cal, rms=0.051960Jy sigma=0.043513 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051960Jy sigma=0.043513 ! Fit after self-cal, rms=0.048404Jy sigma=0.041102 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.382 mas, bmaj=9.151 mas, bpa=15.81 degrees ! Estimated noise=23.566 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00821049 Jy ! Component: 100 - total flux cleaned = -0.00878329 Jy ! Component: 150 - total flux cleaned = -0.00868302 Jy ! Component: 200 - total flux cleaned = -0.00920897 Jy ! Total flux subtracted in 200 components = -0.00920897 Jy ! Clean residual min=-0.005367 max=0.003684 Jy/beam ! Clean residual mean=-0.000006 rms=0.001186 Jy/beam ! Combined flux in latest and established models = 0.0554626 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 200 components and 0.0554626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.044021Jy sigma=0.042661 ! Fit after self-cal, rms=0.043918Jy sigma=0.042273 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00119064 Jy ! Component: 100 - total flux cleaned = -0.000769245 Jy ! Component: 150 - total flux cleaned = -0.000704448 Jy ! Component: 200 - total flux cleaned = -0.000737629 Jy ! Total flux subtracted in 200 components = -0.000737629 Jy ! Clean residual min=-0.002191 max=0.001694 Jy/beam ! Clean residual mean=-0.000003 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.0547249 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 222 components and 0.0547249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.042975Jy sigma=0.042986 ! Fit after self-cal, rms=0.042914Jy sigma=0.042926 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.042914Jy sigma=0.042926 ! Fit after self-cal, rms=0.040825Jy sigma=0.041027 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.402 mas, bmaj=9.119 mas, bpa=15.79 degrees ! Estimated noise=20.0343 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0058214 Jy ! Component: 100 - total flux cleaned = -0.00502237 Jy ! Component: 150 - total flux cleaned = -0.00516752 Jy ! Component: 200 - total flux cleaned = -0.00560515 Jy ! Total flux subtracted in 200 components = -0.00560515 Jy ! Clean residual min=-0.004830 max=0.003369 Jy/beam ! Clean residual mean=-0.000005 rms=0.001082 Jy/beam ! Combined flux in latest and established models = 0.0491198 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 243 components and 0.0491198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.038019Jy sigma=0.042379 ! Fit after self-cal, rms=0.037960Jy sigma=0.042035 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0013112 Jy ! Component: 100 - total flux cleaned = -0.00067886 Jy ! Component: 150 - total flux cleaned = -0.000519767 Jy ! Component: 200 - total flux cleaned = -0.000501208 Jy ! Total flux subtracted in 200 components = -0.000501208 Jy ! Clean residual min=-0.002313 max=0.001918 Jy/beam ! Clean residual mean=-0.000002 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.0486186 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 259 components and 0.0486186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.037202Jy sigma=0.042713 ! Fit after self-cal, rms=0.037174Jy sigma=0.042646 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.037174Jy sigma=0.042646 ! Fit after self-cal, rms=0.035565Jy sigma=0.040992 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.542 mas, bmaj=8.895 mas, bpa=15.39 degrees ! Estimated noise=17.2802 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00433391 Jy ! Component: 100 - total flux cleaned = -0.00323546 Jy ! Component: 150 - total flux cleaned = -0.00356244 Jy ! Component: 200 - total flux cleaned = -0.00397253 Jy ! Total flux subtracted in 200 components = -0.00397253 Jy ! Clean residual min=-0.004569 max=0.003235 Jy/beam ! Clean residual mean=-0.000004 rms=0.001000 Jy/beam ! Combined flux in latest and established models = 0.044646 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 268 components and 0.044646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.033639Jy sigma=0.042174 ! Fit after self-cal, rms=0.033599Jy sigma=0.041855 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00122 Jy ! Component: 100 - total flux cleaned = -0.000977423 Jy ! Component: 150 - total flux cleaned = -0.000953875 Jy ! Component: 200 - total flux cleaned = -0.000983583 Jy ! Total flux subtracted in 200 components = -0.000983583 Jy ! Clean residual min=-0.002557 max=0.002083 Jy/beam ! Clean residual mean=-0.000002 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.0436625 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 279 components and 0.0436625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.033008Jy sigma=0.042485 ! Fit after self-cal, rms=0.032989Jy sigma=0.042414 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.434 mas, bmaj=9.075 mas, bpa=15.77 degrees ! Estimated noise=17.3066 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.434 x 9.075 at 15.77 degrees (North through East) ! Clean map min=-0.027921 max=0.057783 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.973 mas, bmaj=10.86 mas, bpa=15.89 degrees ! Estimated noise=30.8336 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0176277 Jy ! Component: 100 - total flux cleaned = 0.0156449 Jy ! Component: 150 - total flux cleaned = 0.0178819 Jy ! Component: 200 - total flux cleaned = 0.0191919 Jy ! Total flux subtracted in 200 components = 0.0191919 Jy ! Clean residual min=-0.015824 max=0.023163 Jy/beam ! Clean residual mean=0.000020 rms=0.005623 Jy/beam ! Combined flux in latest and established models = 0.0191919 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 46 model components to the UV plane model. ! The established model now contains 46 components and 0.0191919 Jy ! Inverting map and beam ! Estimated beam: bmin=3.434 mas, bmaj=9.075 mas, bpa=15.77 degrees ! Estimated noise=17.3066 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (40.8, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0150533 Jy ! Component: 100 - total flux cleaned = 0.0151013 Jy ! Component: 150 - total flux cleaned = 0.0149182 Jy ! Component: 200 - total flux cleaned = 0.0142829 Jy ! Total flux subtracted in 200 components = 0.0142829 Jy ! Clean residual min=-0.005141 max=0.005897 Jy/beam ! Clean residual mean=-0.000003 rms=0.001832 Jy/beam ! Combined flux in latest and established models = 0.0334748 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 68 components and 0.0334748 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.542 mas, bmaj=8.895 mas, bpa=15.39 degrees ! Estimated noise=17.2802 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00133104 Jy ! Component: 100 - total flux cleaned = -0.0010838 Jy ! Component: 150 - total flux cleaned = -0.000424791 Jy ! Component: 200 - total flux cleaned = -5.10981e-05 Jy ! Total flux subtracted in 200 components = -5.10981e-05 Jy ! Clean residual min=-0.003097 max=0.002691 Jy/beam ! Clean residual mean=-0.000004 rms=0.001048 Jy/beam ! Combined flux in latest and established models = 0.0334237 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000172949 Jy ! Component: 100 - total flux cleaned = 0.000473647 Jy ! Component: 150 - total flux cleaned = 0.000211135 Jy ! Component: 200 - total flux cleaned = -3.29247e-05 Jy ! Total flux subtracted in 200 components = -3.29247e-05 Jy ! Clean residual min=-0.002232 max=0.002375 Jy/beam ! Clean residual mean=-0.000003 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 0.0333908 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 133 components and 0.0333908 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.434 mas, bmaj=9.075 mas, bpa=15.77 degrees ! Estimated noise=17.3066 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00115542 Jy ! Component: 100 - total flux cleaned = -0.00185227 Jy ! Component: 150 - total flux cleaned = -0.00243491 Jy ! Component: 200 - total flux cleaned = -0.00309365 Jy ! Total flux subtracted in 200 components = -0.00309365 Jy ! Clean residual min=-0.001918 max=0.002199 Jy/beam ! Clean residual mean=-0.000002 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.0302971 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 165 components and 0.0302971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.031871Jy sigma=0.045299 ! Fit after self-cal, rms=0.031532Jy sigma=0.044523 wmodel /g0/scr/pima/npcsc_uvs/J0330+7633_X_map.mod ! Writing 165 model components to file: /g0/scr/pima/npcsc_uvs/J0330+7633_X_map.mod wobs /g0/scr/pima/npcsc_uvs/J0330+7633_X_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J0330+7633_X_uvs.fits wwins /g0/scr/pima/npcsc_uvs/J0330+7633_X_map.win ! wwins: Wrote 2 windows to /g0/scr/pima/npcsc_uvs/J0330+7633_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000491595 Jy ! Component: 100 - total flux cleaned = 0.000737954 Jy ! Component: 150 - total flux cleaned = 0.000897476 Jy ! Component: 200 - total flux cleaned = 0.000897845 Jy ! Component: 250 - total flux cleaned = 0.000838599 Jy ! Component: 300 - total flux cleaned = 0.000764326 Jy ! Component: 350 - total flux cleaned = 0.000694545 Jy ! Component: 400 - total flux cleaned = 0.000527215 Jy ! Component: 450 - total flux cleaned = 0.000333349 Jy ! Component: 500 - total flux cleaned = 0.000114398 Jy ! Component: 550 - total flux cleaned = -5.29113e-05 Jy ! Component: 600 - total flux cleaned = -0.000260361 Jy ! Component: 650 - total flux cleaned = -0.000419199 Jy ! Component: 700 - total flux cleaned = -0.000560347 Jy ! Component: 750 - total flux cleaned = -0.000698822 Jy ! Component: 800 - total flux cleaned = -0.000820754 Jy ! Component: 850 - total flux cleaned = -0.0009401 Jy ! Component: 900 - total flux cleaned = -0.000992355 Jy ! Component: 950 - total flux cleaned = -0.00101811 Jy ! Component: 1000 - total flux cleaned = -0.00104353 Jy ! Component: 1050 - total flux cleaned = -0.00105604 Jy ! Component: 1100 - total flux cleaned = -0.00104353 Jy ! Component: 1150 - total flux cleaned = -0.00101852 Jy ! Component: 1200 - total flux cleaned = -0.000993559 Jy ! Component: 1250 - total flux cleaned = -0.000931925 Jy ! Component: 1300 - total flux cleaned = -0.000845457 Jy ! Component: 1350 - total flux cleaned = -0.000783692 Jy ! Component: 1400 - total flux cleaned = -0.000733569 Jy ! Component: 1450 - total flux cleaned = -0.000682889 Jy ! Component: 1500 - total flux cleaned = -0.000644473 Jy ! Component: 1550 - total flux cleaned = -0.00061879 Jy ! Component: 1600 - total flux cleaned = -0.000552828 Jy ! Component: 1650 - total flux cleaned = -0.000512493 Jy ! Component: 1700 - total flux cleaned = -0.000498697 Jy ! Component: 1750 - total flux cleaned = -0.000498721 Jy ! Component: 1800 - total flux cleaned = -0.000484601 Jy ! Component: 1850 - total flux cleaned = -0.000484572 Jy ! Component: 1900 - total flux cleaned = -0.000470043 Jy ! Component: 1950 - total flux cleaned = -0.000454936 Jy ! Component: 2000 - total flux cleaned = -0.000469883 Jy ! Component: 2050 - total flux cleaned = -0.00048538 Jy ! Component: 2100 - total flux cleaned = -0.000485685 Jy ! Component: 2150 - total flux cleaned = -0.000485578 Jy ! Component: 2200 - total flux cleaned = -0.000485325 Jy ! Component: 2250 - total flux cleaned = -0.000536425 Jy ! Component: 2300 - total flux cleaned = -0.000623078 Jy ! Component: 2350 - total flux cleaned = -0.00071173 Jy ! Component: 2400 - total flux cleaned = -0.00080252 Jy ! Component: 2450 - total flux cleaned = -0.000914167 Jy ! Component: 2500 - total flux cleaned = -0.00100929 Jy ! Component: 2550 - total flux cleaned = -0.00110703 Jy ! Component: 2600 - total flux cleaned = -0.0012271 Jy ! Component: 2650 - total flux cleaned = -0.00130884 Jy ! Component: 2700 - total flux cleaned = -0.00143582 Jy ! Component: 2750 - total flux cleaned = -0.00154495 Jy ! Component: 2800 - total flux cleaned = -0.00165694 Jy ! Component: 2850 - total flux cleaned = -0.00174885 Jy ! Component: 2900 - total flux cleaned = -0.00189053 Jy ! Component: 2950 - total flux cleaned = -0.00198716 Jy ! Component: 3000 - total flux cleaned = -0.0021618 Jy ! Component: 3050 - total flux cleaned = -0.00229 Jy ! Component: 3100 - total flux cleaned = -0.00247474 Jy ! Component: 3150 - total flux cleaned = -0.00263666 Jy ! Component: 3200 - total flux cleaned = -0.00286041 Jy ! Component: 3250 - total flux cleaned = -0.00306192 Jy ! Component: 3300 - total flux cleaned = -0.00324011 Jy ! Component: 3350 - total flux cleaned = -0.0034533 Jy ! Component: 3400 - total flux cleaned = -0.00370465 Jy ! Component: 3450 - total flux cleaned = -0.0038994 Jy ! Component: 3500 - total flux cleaned = -0.0040654 Jy ! Component: 3550 - total flux cleaned = -0.00437329 Jy ! Component: 3600 - total flux cleaned = -0.00462071 Jy ! Component: 3650 - total flux cleaned = -0.00487512 Jy ! Component: 3700 - total flux cleaned = -0.00510008 Jy ! Component: 3750 - total flux cleaned = -0.00537005 Jy ! Component: 3800 - total flux cleaned = -0.00560919 Jy ! Component: 3850 - total flux cleaned = -0.00585479 Jy ! Component: 3900 - total flux cleaned = -0.00615023 Jy ! Component: 3950 - total flux cleaned = -0.00641089 Jy ! Component: 4000 - total flux cleaned = -0.0066801 Jy ! Component: 4050 - total flux cleaned = -0.00695796 Jy ! Total flux subtracted in 4096 components = -0.00719626 Jy ! Clean residual min=-0.002685 max=0.002544 Jy/beam ! Clean residual mean=0.000002 rms=0.000904 Jy/beam ! Combined flux in latest and established models = 0.0231009 Jy keep ! Adding 196 model components to the UV plane model. ! The established model now contains 361 components and 0.0231009 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsc_uvs/J0330+7633_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.434 x 9.075 at 15.77 degrees (North through East) ! Clean map min=-0.013491 max=0.019967 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J0330+7633_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0199665 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00111757 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -16.7916 16.7916 33.5833 67.1665 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0033 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.019 quit ! Quitting program ! Log file /g0/scr/pima/npcsc_uvs/J0330+7633_X_uvs.log closed on Sun Oct 6 14:22:48 2013