! Started logfile: /g0/scr/pima/npcsc_uvs/J0306+8200_X_uvs.log on Sun Oct 6 14:22:39 2013 obs /g0/scr/pima/npcsc_uvs/J0306+8200_X_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J0306+8200_X_uva.fits ! AN table 1: 46 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.714286 visibilities/baseline/integration-bin. ! Found source: J0306+8200 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 3680 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J0306+8200_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.004160Jy sigma=0.743366 ! Fit after self-cal, rms=0.957990Jy sigma=0.675864 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7027 mas, bmaj=4.115 mas, bpa=0.3531 degrees ! Estimated noise=33.6537 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0515682 Jy ! Component: 100 - total flux cleaned = 0.0630379 Jy ! Total flux subtracted in 100 components = 0.0630379 Jy ! Clean residual min=-0.007769 max=0.006918 Jy/beam ! Clean residual mean=0.000001 rms=0.001834 Jy/beam ! Combined flux in latest and established models = 0.0630379 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0630379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073180Jy sigma=0.058410 ! Fit after self-cal, rms=0.070585Jy sigma=0.056754 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.057 mas, bmaj=4.289 mas, bpa=-0.5244 degrees ! Estimated noise=17.8298 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00588719 Jy ! Component: 100 - total flux cleaned = 0.00581069 Jy ! Component: 150 - total flux cleaned = 0.0055953 Jy ! Component: 200 - total flux cleaned = 0.00548451 Jy ! Total flux subtracted in 200 components = 0.00548451 Jy ! Clean residual min=-0.004927 max=0.005574 Jy/beam ! Clean residual mean=0.000003 rms=0.001300 Jy/beam ! Combined flux in latest and established models = 0.0685224 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0685224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072253Jy sigma=0.055134 ! Fit after self-cal, rms=0.072243Jy sigma=0.055127 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.86 KP 0.94 LA 0.94 ! MK 0.95 NL 0.95 OV 0.87 PT 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.74 FD 0.90 KP 0.84 LA 0.88 ! MK 0.87 NL 0.99 OV 0.87 PT 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.74 FD 0.79 KP 0.82 LA 0.80 ! MK 0.96 NL 0.85 OV 0.94 PT 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.64 FD 0.85 KP 0.85 LA 0.77 ! MK 0.71 NL 0.93 OV 0.93 PT 1.05 ! ! ! Fit before self-cal, rms=0.072243Jy sigma=0.055127 ! Fit after self-cal, rms=0.062485Jy sigma=0.052207 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.051 mas, bmaj=4.275 mas, bpa=-0.1368 degrees ! Estimated noise=13.8328 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0116898 Jy ! Component: 100 - total flux cleaned = -0.0142395 Jy ! Component: 150 - total flux cleaned = -0.0142354 Jy ! Component: 200 - total flux cleaned = -0.0141621 Jy ! Total flux subtracted in 200 components = -0.0141621 Jy ! Clean residual min=-0.002603 max=0.002414 Jy/beam ! Clean residual mean=-0.000002 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 0.0543604 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 22 components and 0.0543604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056380Jy sigma=0.054042 ! Fit after self-cal, rms=0.056500Jy sigma=0.053960 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056500Jy sigma=0.053960 ! Fit after self-cal, rms=0.049578Jy sigma=0.052068 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.052 mas, bmaj=4.268 mas, bpa=-0.1332 degrees ! Estimated noise=10.9202 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00921008 Jy ! Component: 100 - total flux cleaned = -0.0112198 Jy ! Component: 150 - total flux cleaned = -0.0113736 Jy ! Component: 200 - total flux cleaned = -0.0113233 Jy ! Total flux subtracted in 200 components = -0.0113233 Jy ! Clean residual min=-0.002086 max=0.001876 Jy/beam ! Clean residual mean=-0.000002 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.043037 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 25 components and 0.043037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.044777Jy sigma=0.053928 ! Fit after self-cal, rms=0.044788Jy sigma=0.053915 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.90161e-05 Jy ! Component: 100 - total flux cleaned = 7.92682e-05 Jy ! Component: 150 - total flux cleaned = 9.06568e-05 Jy ! Component: 200 - total flux cleaned = 9.07001e-05 Jy ! Total flux subtracted in 200 components = 9.07001e-05 Jy ! Clean residual min=-0.002091 max=0.001752 Jy/beam ! Clean residual mean=-0.000002 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.0431277 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 30 components and 0.0431277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.044755Jy sigma=0.053939 ! Fit after self-cal, rms=0.044756Jy sigma=0.053938 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.044756Jy sigma=0.053938 ! Fit after self-cal, rms=0.039174Jy sigma=0.052023 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.051 mas, bmaj=4.257 mas, bpa=-0.1801 degrees ! Estimated noise=8.65705 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00702342 Jy ! Component: 100 - total flux cleaned = -0.00856014 Jy ! Component: 150 - total flux cleaned = -0.00885616 Jy ! Component: 200 - total flux cleaned = -0.00883377 Jy ! Total flux subtracted in 200 components = -0.00883377 Jy ! Clean residual min=-0.001621 max=0.001375 Jy/beam ! Clean residual mean=-0.000002 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.034294 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 35 components and 0.034294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.035545Jy sigma=0.053890 ! Fit after self-cal, rms=0.035549Jy sigma=0.053888 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.0718e-05 Jy ! Component: 100 - total flux cleaned = 2.21318e-05 Jy ! Component: 150 - total flux cleaned = 2.21326e-05 Jy ! Component: 200 - total flux cleaned = 1.4938e-05 Jy ! Total flux subtracted in 200 components = 1.4938e-05 Jy ! Clean residual min=-0.001629 max=0.001382 Jy/beam ! Clean residual mean=-0.000002 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.0343089 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 40 components and 0.0343089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.035524Jy sigma=0.053912 ! Fit after self-cal, rms=0.035526Jy sigma=0.053911 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.035526Jy sigma=0.053911 ! Fit after self-cal, rms=0.031057Jy sigma=0.051994 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.646 mas, bmaj=4.627 mas, bpa=-8.822 degrees ! Estimated noise=7.79571 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00549318 Jy ! Component: 100 - total flux cleaned = -0.00670235 Jy ! Component: 150 - total flux cleaned = -0.00705041 Jy ! Component: 200 - total flux cleaned = -0.00715549 Jy ! Total flux subtracted in 200 components = -0.00715549 Jy ! Clean residual min=-0.001328 max=0.001192 Jy/beam ! Clean residual mean=-0.000002 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.0271534 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 49 components and 0.0271534 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.028245Jy sigma=0.053777 ! Fit after self-cal, rms=0.028242Jy sigma=0.053770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.68691e-05 Jy ! Component: 100 - total flux cleaned = -0.000108473 Jy ! Component: 150 - total flux cleaned = -0.000121481 Jy ! Component: 200 - total flux cleaned = -0.000138432 Jy ! Total flux subtracted in 200 components = -0.000138432 Jy ! Clean residual min=-0.001357 max=0.001192 Jy/beam ! Clean residual mean=-0.000002 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.027015 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 52 components and 0.027015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.028234Jy sigma=0.053790 ! Fit after self-cal, rms=0.028234Jy sigma=0.053790 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.05 mas, bmaj=4.253 mas, bpa=-0.1922 degrees ! Estimated noise=6.86032 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.05 x 4.253 at -0.1922 degrees (North through East) ! Clean map min=-0.0012769 max=0.02638 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6984 mas, bmaj=4.117 mas, bpa=0.5321 degrees ! Estimated noise=12.967 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0209866 Jy ! Component: 100 - total flux cleaned = 0.0258252 Jy ! Component: 150 - total flux cleaned = 0.0263896 Jy ! Component: 200 - total flux cleaned = 0.0263948 Jy ! Total flux subtracted in 200 components = 0.0263948 Jy ! Clean residual min=-0.002006 max=0.002128 Jy/beam ! Clean residual mean=-0.000000 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.0263948 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0263948 Jy ! Inverting map and beam ! Estimated beam: bmin=1.05 mas, bmaj=4.253 mas, bpa=-0.1922 degrees ! Estimated noise=6.86032 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000437624 Jy ! Component: 100 - total flux cleaned = 0.000566214 Jy ! Component: 150 - total flux cleaned = 0.000645649 Jy ! Component: 200 - total flux cleaned = 0.000674575 Jy ! Total flux subtracted in 200 components = 0.000674575 Jy ! Clean residual min=-0.001245 max=0.001088 Jy/beam ! Clean residual mean=-0.000001 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.0270694 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 20 components and 0.0270694 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.646 mas, bmaj=4.627 mas, bpa=-8.822 degrees ! Estimated noise=7.79571 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.60946e-05 Jy ! Component: 100 - total flux cleaned = -4.06424e-05 Jy ! Component: 150 - total flux cleaned = -5.39765e-05 Jy ! Component: 200 - total flux cleaned = -6.60634e-05 Jy ! Total flux subtracted in 200 components = -6.60634e-05 Jy ! Clean residual min=-0.001305 max=0.001180 Jy/beam ! Clean residual mean=-0.000002 rms=0.000381 Jy/beam ! Combined flux in latest and established models = 0.0270033 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.1109e-05 Jy ! Component: 100 - total flux cleaned = -2.578e-05 Jy ! Component: 150 - total flux cleaned = -3.44421e-05 Jy ! Component: 200 - total flux cleaned = -4.22855e-05 Jy ! Total flux subtracted in 200 components = -4.22855e-05 Jy ! Clean residual min=-0.001299 max=0.001180 Jy/beam ! Clean residual mean=-0.000002 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.026961 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 26 components and 0.026961 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.05 mas, bmaj=4.253 mas, bpa=-0.1922 degrees ! Estimated noise=6.86032 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.19509e-05 Jy ! Component: 100 - total flux cleaned = 8.7124e-05 Jy ! Component: 150 - total flux cleaned = 8.01536e-05 Jy ! Component: 200 - total flux cleaned = 8.00612e-05 Jy ! Total flux subtracted in 200 components = 8.00612e-05 Jy ! Clean residual min=-0.001267 max=0.001086 Jy/beam ! Clean residual mean=-0.000001 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.0270411 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 31 components and 0.0270411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.028132Jy sigma=0.053959 ! Fit after self-cal, rms=0.028131Jy sigma=0.053957 wmodel /g0/scr/pima/npcsc_uvs/J0306+8200_X_map.mod ! Writing 31 model components to file: /g0/scr/pima/npcsc_uvs/J0306+8200_X_map.mod wobs /g0/scr/pima/npcsc_uvs/J0306+8200_X_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J0306+8200_X_uvs.fits wwins /g0/scr/pima/npcsc_uvs/J0306+8200_X_map.win ! wwins: Wrote 1 windows to /g0/scr/pima/npcsc_uvs/J0306+8200_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00057229 Jy ! Component: 100 - total flux cleaned = -0.000877015 Jy ! Component: 150 - total flux cleaned = -0.00104595 Jy ! Component: 200 - total flux cleaned = -0.00122092 Jy ! Component: 250 - total flux cleaned = -0.00136924 Jy ! Component: 300 - total flux cleaned = -0.00154011 Jy ! Component: 350 - total flux cleaned = -0.00158492 Jy ! Component: 400 - total flux cleaned = -0.00161343 Jy ! Component: 450 - total flux cleaned = -0.00162719 Jy ! Component: 500 - total flux cleaned = -0.00158784 Jy ! Component: 550 - total flux cleaned = -0.00152422 Jy ! Component: 600 - total flux cleaned = -0.00147517 Jy ! Component: 650 - total flux cleaned = -0.00145143 Jy ! Component: 700 - total flux cleaned = -0.00141686 Jy ! Component: 750 - total flux cleaned = -0.00139422 Jy ! Component: 800 - total flux cleaned = -0.00138346 Jy ! Component: 850 - total flux cleaned = -0.00137263 Jy ! Component: 900 - total flux cleaned = -0.00136232 Jy ! Component: 950 - total flux cleaned = -0.00137245 Jy ! Component: 1000 - total flux cleaned = -0.0013321 Jy ! Component: 1050 - total flux cleaned = -0.00126311 Jy ! Component: 1100 - total flux cleaned = -0.00124382 Jy ! Component: 1150 - total flux cleaned = -0.00118653 Jy ! Component: 1200 - total flux cleaned = -0.00113959 Jy ! Component: 1250 - total flux cleaned = -0.00108387 Jy ! Component: 1300 - total flux cleaned = -0.00103808 Jy ! Component: 1350 - total flux cleaned = -0.000984062 Jy ! Component: 1400 - total flux cleaned = -0.000966154 Jy ! Component: 1450 - total flux cleaned = -0.000904616 Jy ! Component: 1500 - total flux cleaned = -0.000835272 Jy ! Component: 1550 - total flux cleaned = -0.000792324 Jy ! Component: 1600 - total flux cleaned = -0.000716079 Jy ! Component: 1650 - total flux cleaned = -0.000699364 Jy ! Component: 1700 - total flux cleaned = -0.000632885 Jy ! Component: 1750 - total flux cleaned = -0.000575372 Jy ! Component: 1800 - total flux cleaned = -0.00051841 Jy ! Component: 1850 - total flux cleaned = -0.000461953 Jy ! Component: 1900 - total flux cleaned = -0.000421936 Jy ! Component: 1950 - total flux cleaned = -0.000382219 Jy ! Component: 2000 - total flux cleaned = -0.00033496 Jy ! Component: 2050 - total flux cleaned = -0.000295808 Jy ! Component: 2100 - total flux cleaned = -0.000264686 Jy ! Component: 2150 - total flux cleaned = -0.000210575 Jy ! Component: 2200 - total flux cleaned = -0.000179853 Jy ! Component: 2250 - total flux cleaned = -0.000141651 Jy ! Component: 2300 - total flux cleaned = -0.000103635 Jy ! Component: 2350 - total flux cleaned = -6.57666e-05 Jy ! Component: 2400 - total flux cleaned = -2.81403e-05 Jy ! Component: 2450 - total flux cleaned = 1.68078e-05 Jy ! Component: 2500 - total flux cleaned = 6.15384e-05 Jy ! Component: 2550 - total flux cleaned = 9.12008e-05 Jy ! Component: 2600 - total flux cleaned = 0.000120784 Jy ! Component: 2650 - total flux cleaned = 0.000179683 Jy ! Component: 2700 - total flux cleaned = 0.000201663 Jy ! Component: 2750 - total flux cleaned = 0.000252805 Jy ! Component: 2800 - total flux cleaned = 0.000281922 Jy ! Component: 2850 - total flux cleaned = 0.000318242 Jy ! Component: 2900 - total flux cleaned = 0.000354428 Jy ! Component: 2950 - total flux cleaned = 0.000376117 Jy ! Component: 3000 - total flux cleaned = 0.000405027 Jy ! Component: 3050 - total flux cleaned = 0.000426599 Jy ! Component: 3100 - total flux cleaned = 0.000462565 Jy ! Component: 3150 - total flux cleaned = 0.000484073 Jy ! Component: 3200 - total flux cleaned = 0.000512762 Jy ! Component: 3250 - total flux cleaned = 0.000541393 Jy ! Component: 3300 - total flux cleaned = 0.000555699 Jy ! Component: 3350 - total flux cleaned = 0.000570032 Jy ! Component: 3400 - total flux cleaned = 0.000598627 Jy ! Component: 3450 - total flux cleaned = 0.000620056 Jy ! Component: 3500 - total flux cleaned = 0.000648694 Jy ! Component: 3550 - total flux cleaned = 0.000677353 Jy ! Component: 3600 - total flux cleaned = 0.00069885 Jy ! Component: 3650 - total flux cleaned = 0.000734746 Jy ! Component: 3700 - total flux cleaned = 0.000756261 Jy ! Component: 3750 - total flux cleaned = 0.000777837 Jy ! Component: 3800 - total flux cleaned = 0.000806622 Jy ! Component: 3850 - total flux cleaned = 0.000828218 Jy ! Component: 3900 - total flux cleaned = 0.000864308 Jy ! Component: 3950 - total flux cleaned = 0.000893281 Jy ! Component: 4000 - total flux cleaned = 0.000915055 Jy ! Component: 4050 - total flux cleaned = 0.000936814 Jy ! Total flux subtracted in 4096 components = 0.00096591 Jy ! Clean residual min=-0.000429 max=0.000425 Jy/beam ! Clean residual mean=-0.000000 rms=0.000122 Jy/beam ! Combined flux in latest and established models = 0.028007 Jy keep ! Adding 279 model components to the UV plane model. ! The established model now contains 310 components and 0.028007 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsc_uvs/J0306+8200_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.05 x 4.253 at -0.1922 degrees (North through East) ! Clean map min=-0.00079747 max=0.026082 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J0306+8200_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0260815 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000118399 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.36188 1.36188 2.72375 5.4475 10.895 21.79 43.58 87.16 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.026 quit ! Quitting program ! Log file /g0/scr/pima/npcsc_uvs/J0306+8200_X_uvs.log closed on Sun Oct 6 14:22:43 2013