! Started logfile: /g0/scr/pima/npcsc_uvs/J0306+8200_S_uvs.log on Sun Oct  6 14:26:08 2013
obs /g0/scr/pima/npcsc_uvs/J0306+8200_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J0306+8200_S_uva.fits
! AN table 1: 47 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.82695 visibilities/baseline/integration-bin.
! Found source: J0306+8200
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 6996 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J0306+8200_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004297Jy  sigma=0.771487
! Fit after  self-cal, rms=0.955231Jy  sigma=0.696296
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.217 mas, bmaj=11.51 mas, bpa=-5.661 degrees
! Estimated noise=23.2321 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.058855 Jy
! Component: 100  -  total flux cleaned = 0.0691298 Jy
! Total flux subtracted in 100 components = 0.0691298 Jy
! Clean residual min=-0.007857 max=0.007742 Jy/beam
! Clean residual mean=0.000014 rms=0.001853 Jy/beam
! Combined flux in latest and established models = 0.0691298 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0691298 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090727Jy  sigma=0.077516
! Fit after  self-cal, rms=0.088524Jy  sigma=0.076044
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.079 mas, bmaj=11.8 mas, bpa=-6.437 degrees
! Estimated noise=12.4526 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00578982 Jy
! Component: 100  -  total flux cleaned = 0.00696365 Jy
! Component: 150  -  total flux cleaned = 0.0073604 Jy
! Component: 200  -  total flux cleaned = 0.00768375 Jy
! Total flux subtracted in 200 components = 0.00768375 Jy
! Clean residual min=-0.005448 max=0.005112 Jy/beam
! Clean residual mean=0.000007 rms=0.001264 Jy/beam
! Combined flux in latest and established models = 0.0768135 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 21 components and 0.0768135 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089734Jy  sigma=0.074747
! Fit after  self-cal, rms=0.089716Jy  sigma=0.074729
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.89     HN        0.68     KP        0.87     
!   LA        0.89     MK        0.84     NL        0.93     OV        1.00     
!   PT        1.07     SC        0.65     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.79     HN        0.72     KP        0.93     
!   LA        0.88     MK        0.83     NL        0.91     OV        0.95     
!   PT        0.99     SC        0.76     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.97     HN        0.79     KP        0.89     
!   LA        0.66     MK        0.98     NL        1.02     OV        0.89     
!   PT        1.02     SC        0.79     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.86     HN        0.75     KP        0.81     
!   LA        0.58     MK        0.92     NL        0.92     OV        0.74     
!   PT        0.96     SC        0.81     
! 
! 
! Fit before self-cal, rms=0.089716Jy  sigma=0.074729
! Fit after  self-cal, rms=0.074528Jy  sigma=0.070788
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.011 mas, bmaj=11.9 mas, bpa=-6.939 degrees
! Estimated noise=9.45841 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0136564 Jy
! Component: 100  -  total flux cleaned = -0.0166475 Jy
! Component: 150  -  total flux cleaned = -0.0166918 Jy
! Component: 200  -  total flux cleaned = -0.0167202 Jy
! Total flux subtracted in 200 components = -0.0167202 Jy
! Clean residual min=-0.002169 max=0.002326 Jy/beam
! Clean residual mean=-0.000005 rms=0.000582 Jy/beam
! Combined flux in latest and established models = 0.0600933 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 36 components and 0.0600933 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067769Jy  sigma=0.072928
! Fit after  self-cal, rms=0.068028Jy  sigma=0.072689
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068028Jy  sigma=0.072689
! Fit after  self-cal, rms=0.058348Jy  sigma=0.070434
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.999 mas, bmaj=11.91 mas, bpa=-6.973 degrees
! Estimated noise=7.35001 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0105844 Jy
! Component: 100  -  total flux cleaned = -0.0128592 Jy
! Component: 150  -  total flux cleaned = -0.0129365 Jy
! Component: 200  -  total flux cleaned = -0.0129825 Jy
! Total flux subtracted in 200 components = -0.0129825 Jy
! Clean residual min=-0.001640 max=0.001757 Jy/beam
! Clean residual mean=-0.000003 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.0471108 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 40 components and 0.0471107 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053149Jy  sigma=0.072594
! Fit after  self-cal, rms=0.053206Jy  sigma=0.072584
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.4912e-05 Jy
! Component: 100  -  total flux cleaned = -0.000133575 Jy
! Component: 150  -  total flux cleaned = -0.0001607 Jy
! Component: 200  -  total flux cleaned = -0.000184554 Jy
! Total flux subtracted in 200 components = -0.000184554 Jy
! Clean residual min=-0.001627 max=0.001795 Jy/beam
! Clean residual mean=-0.000003 rms=0.000456 Jy/beam
! Combined flux in latest and established models = 0.0469262 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 52 components and 0.0469262 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053120Jy  sigma=0.072675
! Fit after  self-cal, rms=0.053111Jy  sigma=0.072660
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053111Jy  sigma=0.072660
! Fit after  self-cal, rms=0.045196Jy  sigma=0.070379
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.991 mas, bmaj=11.91 mas, bpa=-6.986 degrees
! Estimated noise=5.7005 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00801009 Jy
! Component: 100  -  total flux cleaned = -0.00976906 Jy
! Component: 150  -  total flux cleaned = -0.0101001 Jy
! Component: 200  -  total flux cleaned = -0.0101466 Jy
! Total flux subtracted in 200 components = -0.0101466 Jy
! Clean residual min=-0.001267 max=0.001408 Jy/beam
! Clean residual mean=-0.000003 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.0367796 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 53 components and 0.0367796 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.041282Jy  sigma=0.072561
! Fit after  self-cal, rms=0.041291Jy  sigma=0.072557
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000121669 Jy
! Component: 100  -  total flux cleaned = -0.000144039 Jy
! Component: 150  -  total flux cleaned = -0.000163005 Jy
! Component: 200  -  total flux cleaned = -0.000178879 Jy
! Total flux subtracted in 200 components = -0.000178879 Jy
! Clean residual min=-0.001254 max=0.001394 Jy/beam
! Clean residual mean=-0.000002 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.0366007 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 56 components and 0.0366007 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.041247Jy  sigma=0.072619
! Fit after  self-cal, rms=0.041248Jy  sigma=0.072617
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.041248Jy  sigma=0.072617
! Fit after  self-cal, rms=0.035067Jy  sigma=0.070358
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.355 mas, bmaj=13.26 mas, bpa=-10.12 degrees
! Estimated noise=5.75345 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00612333 Jy
! Component: 100  -  total flux cleaned = -0.00746674 Jy
! Component: 150  -  total flux cleaned = -0.00777399 Jy
! Component: 200  -  total flux cleaned = -0.0078496 Jy
! Total flux subtracted in 200 components = -0.0078496 Jy
! Clean residual min=-0.001232 max=0.001295 Jy/beam
! Clean residual mean=-0.000005 rms=0.000356 Jy/beam
! Combined flux in latest and established models = 0.0287511 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 61 components and 0.0287511 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.032052Jy  sigma=0.072504
! Fit after  self-cal, rms=0.032057Jy  sigma=0.072496
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.17449e-05 Jy
! Component: 100  -  total flux cleaned = -3.64155e-05 Jy
! Component: 150  -  total flux cleaned = -3.17047e-05 Jy
! Component: 200  -  total flux cleaned = -2.72653e-05 Jy
! Total flux subtracted in 200 components = -2.72653e-05 Jy
! Clean residual min=-0.001243 max=0.001279 Jy/beam
! Clean residual mean=-0.000005 rms=0.000357 Jy/beam
! Combined flux in latest and established models = 0.0287239 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 65 components and 0.0287239 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.032043Jy  sigma=0.072519
! Fit after  self-cal, rms=0.032048Jy  sigma=0.072517
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.986 mas, bmaj=11.91 mas, bpa=-6.974 degrees
! Estimated noise=4.42203 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.986 x 11.91 at -6.974 degrees (North through East)
! Clean map  min=-0.00095453  max=0.027189 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.174 mas, bmaj=11.58 mas, bpa=-6.06 degrees
! Estimated noise=8.04202 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0208102 Jy
! Component: 100  -  total flux cleaned = 0.0241325 Jy
! Component: 150  -  total flux cleaned = 0.0250595 Jy
! Component: 200  -  total flux cleaned = 0.0258711 Jy
! Total flux subtracted in 200 components = 0.0258711 Jy
! Clean residual min=-0.002148 max=0.001931 Jy/beam
! Clean residual mean=0.000000 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.0258711 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0258711 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.986 mas, bmaj=11.91 mas, bpa=-6.974 degrees
! Estimated noise=4.42203 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00150828 Jy
! Component: 100  -  total flux cleaned = 0.00225168 Jy
! Component: 150  -  total flux cleaned = 0.00243718 Jy
! Component: 200  -  total flux cleaned = 0.00247581 Jy
! Total flux subtracted in 200 components = 0.00247581 Jy
! Clean residual min=-0.001080 max=0.001057 Jy/beam
! Clean residual mean=-0.000002 rms=0.000283 Jy/beam
! Combined flux in latest and established models = 0.0283469 Jy
! Adding 11 model components to the UV plane model.
! The established model now contains 21 components and 0.0283469 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.355 mas, bmaj=13.26 mas, bpa=-10.12 degrees
! Estimated noise=5.75345 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000179452 Jy
! Component: 100  -  total flux cleaned = 0.000233985 Jy
! Component: 150  -  total flux cleaned = 0.000277276 Jy
! Component: 200  -  total flux cleaned = 0.000306393 Jy
! Total flux subtracted in 200 components = 0.000306393 Jy
! Clean residual min=-0.001330 max=0.001293 Jy/beam
! Clean residual mean=-0.000005 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.0286533 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.11927e-05 Jy
! Component: 100  -  total flux cleaned = 5.2606e-05 Jy
! Component: 150  -  total flux cleaned = 7.18723e-05 Jy
! Component: 200  -  total flux cleaned = 8.46323e-05 Jy
! Total flux subtracted in 200 components = 8.46323e-05 Jy
! Clean residual min=-0.001295 max=0.001304 Jy/beam
! Clean residual mean=-0.000005 rms=0.000359 Jy/beam
! Combined flux in latest and established models = 0.0287379 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 41 components and 0.0287379 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.986 mas, bmaj=11.91 mas, bpa=-6.974 degrees
! Estimated noise=4.42203 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.59584e-06 Jy
! Component: 100  -  total flux cleaned = -7.2766e-05 Jy
! Component: 150  -  total flux cleaned = -9.14465e-05 Jy
! Component: 200  -  total flux cleaned = -0.000115173 Jy
! Total flux subtracted in 200 components = -0.000115173 Jy
! Clean residual min=-0.001036 max=0.001069 Jy/beam
! Clean residual mean=-0.000002 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.0286228 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 52 components and 0.0286228 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.031974Jy  sigma=0.072693
! Fit after  self-cal, rms=0.031974Jy  sigma=0.072682
wmodel /g0/scr/pima/npcsc_uvs/J0306+8200_S_map.mod
! Writing 52 model components to file: /g0/scr/pima/npcsc_uvs/J0306+8200_S_map.mod
wobs /g0/scr/pima/npcsc_uvs/J0306+8200_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J0306+8200_S_uvs.fits
wwins /g0/scr/pima/npcsc_uvs/J0306+8200_S_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsc_uvs/J0306+8200_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000142489 Jy
! Component: 100  -  total flux cleaned = 1.77946e-05 Jy
! Component: 150  -  total flux cleaned = -8.35147e-05 Jy
! Component: 200  -  total flux cleaned = -0.000164499 Jy
! Component: 250  -  total flux cleaned = -0.000257762 Jy
! Component: 300  -  total flux cleaned = -0.000257608 Jy
! Component: 350  -  total flux cleaned = -0.000228797 Jy
! Component: 400  -  total flux cleaned = -0.000214762 Jy
! Component: 450  -  total flux cleaned = -0.000145594 Jy
! Component: 500  -  total flux cleaned = -7.80598e-05 Jy
! Component: 550  -  total flux cleaned = 1.26377e-06 Jy
! Component: 600  -  total flux cleaned = 9.21403e-05 Jy
! Component: 650  -  total flux cleaned = 0.000181511 Jy
! Component: 700  -  total flux cleaned = 0.000269071 Jy
! Component: 750  -  total flux cleaned = 0.000343001 Jy
! Component: 800  -  total flux cleaned = 0.0004037 Jy
! Component: 850  -  total flux cleaned = 0.000546882 Jy
! Component: 900  -  total flux cleaned = 0.000628966 Jy
! Component: 950  -  total flux cleaned = 0.000756271 Jy
! Component: 1000  -  total flux cleaned = 0.000836272 Jy
! Component: 1050  -  total flux cleaned = 0.000926793 Jy
! Component: 1100  -  total flux cleaned = 0.00106044 Jy
! Component: 1150  -  total flux cleaned = 0.0011374 Jy
! Component: 1200  -  total flux cleaned = 0.00125687 Jy
! Component: 1250  -  total flux cleaned = 0.00133199 Jy
! Component: 1300  -  total flux cleaned = 0.00143803 Jy
! Component: 1350  -  total flux cleaned = 0.00153243 Jy
! Component: 1400  -  total flux cleaned = 0.00164646 Jy
! Component: 1450  -  total flux cleaned = 0.00173859 Jy
! Component: 1500  -  total flux cleaned = 0.00182959 Jy
! Component: 1550  -  total flux cleaned = 0.00192975 Jy
! Component: 1600  -  total flux cleaned = 0.00199912 Jy
! Component: 1650  -  total flux cleaned = 0.0021069 Jy
! Component: 1700  -  total flux cleaned = 0.002165 Jy
! Component: 1750  -  total flux cleaned = 0.00226085 Jy
! Component: 1800  -  total flux cleaned = 0.0023462 Jy
! Component: 1850  -  total flux cleaned = 0.002459 Jy
! Component: 1900  -  total flux cleaned = 0.00254266 Jy
! Component: 1950  -  total flux cleaned = 0.00262561 Jy
! Component: 2000  -  total flux cleaned = 0.0026896 Jy
! Component: 2050  -  total flux cleaned = 0.00278915 Jy
! Component: 2100  -  total flux cleaned = 0.00286101 Jy
! Component: 2150  -  total flux cleaned = 0.00294112 Jy
! Component: 2200  -  total flux cleaned = 0.00301172 Jy
! Component: 2250  -  total flux cleaned = 0.00309051 Jy
! Component: 2300  -  total flux cleaned = 0.00315134 Jy
! Component: 2350  -  total flux cleaned = 0.00323736 Jy
! Component: 2400  -  total flux cleaned = 0.00328859 Jy
! Component: 2450  -  total flux cleaned = 0.0033648 Jy
! Component: 2500  -  total flux cleaned = 0.00340691 Jy
! Component: 2550  -  total flux cleaned = 0.00350709 Jy
! Component: 2600  -  total flux cleaned = 0.00355672 Jy
! Component: 2650  -  total flux cleaned = 0.00359777 Jy
! Component: 2700  -  total flux cleaned = 0.00368749 Jy
! Component: 2750  -  total flux cleaned = 0.0037117 Jy
! Component: 2800  -  total flux cleaned = 0.00376805 Jy
! Component: 2850  -  total flux cleaned = 0.00382404 Jy
! Component: 2900  -  total flux cleaned = 0.00387174 Jy
! Component: 2950  -  total flux cleaned = 0.00391906 Jy
! Component: 3000  -  total flux cleaned = 0.0039818 Jy
! Component: 3050  -  total flux cleaned = 0.00402081 Jy
! Component: 3100  -  total flux cleaned = 0.0041136 Jy
! Component: 3150  -  total flux cleaned = 0.0041673 Jy
! Component: 3200  -  total flux cleaned = 0.00421309 Jy
! Component: 3250  -  total flux cleaned = 0.00426618 Jy
! Component: 3300  -  total flux cleaned = 0.00430392 Jy
! Component: 3350  -  total flux cleaned = 0.00437134 Jy
! Component: 3400  -  total flux cleaned = 0.00441599 Jy
! Component: 3450  -  total flux cleaned = 0.00446767 Jy
! Component: 3500  -  total flux cleaned = 0.00451179 Jy
! Component: 3550  -  total flux cleaned = 0.00454105 Jy
! Component: 3600  -  total flux cleaned = 0.00457736 Jy
! Component: 3650  -  total flux cleaned = 0.00459178 Jy
! Component: 3700  -  total flux cleaned = 0.00462057 Jy
! Component: 3750  -  total flux cleaned = 0.0046848 Jy
! Component: 3800  -  total flux cleaned = 0.004699 Jy
! Component: 3850  -  total flux cleaned = 0.00473432 Jy
! Component: 3900  -  total flux cleaned = 0.00475541 Jy
! Component: 3950  -  total flux cleaned = 0.00480428 Jy
! Component: 4000  -  total flux cleaned = 0.00480424 Jy
! Component: 4050  -  total flux cleaned = 0.00481811 Jy
! Total flux subtracted in 4096 components = 0.00484562 Jy
! Clean residual min=-0.000369 max=0.000370 Jy/beam
! Clean residual mean=-0.000001 rms=0.000127 Jy/beam
! Combined flux in latest and established models = 0.0334684 Jy
keep
! Adding 312 model components to the UV plane model.
! The established model now contains 364 components and 0.0334684 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsc_uvs/J0306+8200_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.986 x 11.91 at -6.974 degrees (North through East)
! Clean map  min=-0.00091269  max=0.026903 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J0306+8200_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0269027 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000125464 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.39909 1.39909 2.79817 5.59634 11.1927 22.3854 44.7707 89.5415
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0003 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.026 
quit
! Quitting program
! Log file /g0/scr/pima/npcsc_uvs/J0306+8200_S_uvs.log closed on Sun Oct  6 14:26:13 2013