! Started logfile: /g0/scr/pima/npcsc_uvs/J0131+8446_S_uvs.log on Sun Oct  6 14:25:51 2013
obs /g0/scr/pima/npcsc_uvs/J0131+8446_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J0131+8446_S_uva.fits
! AN table 1: 46 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.5 visibilities/baseline/integration-bin.
! Found source: J0131+8446
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 920 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J0131+8446_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.014785Jy  sigma=0.884717
! Fit after  self-cal, rms=0.908456Jy  sigma=0.759048
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=26.88 mas, bmaj=45.51 mas, bpa=11.98 degrees
! Estimated noise=38.2405 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.088983 Jy
! Component: 100  -  total flux cleaned = 0.091861 Jy
! Total flux subtracted in 100 components = 0.091861 Jy
! Clean residual min=-0.011054 max=0.011058 Jy/beam
! Clean residual mean=0.000062 rms=0.005330 Jy/beam
! Combined flux in latest and established models = 0.091861 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.091861 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071815Jy  sigma=0.060009
! Fit after  self-cal, rms=0.068828Jy  sigma=0.059057
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=23.28 mas, bmaj=46.69 mas, bpa=4.949 degrees
! Estimated noise=33.0693 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00217951 Jy
! Component: 100  -  total flux cleaned = -0.00208977 Jy
! Component: 150  -  total flux cleaned = -0.00762302 Jy
! Component: 200  -  total flux cleaned = -0.0140614 Jy
! Total flux subtracted in 200 components = -0.0140614 Jy
! Clean residual min=-0.007607 max=0.007530 Jy/beam
! Clean residual mean=0.000034 rms=0.002060 Jy/beam
! Combined flux in latest and established models = 0.0777995 Jy
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 79 components and 0.0777995 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072544Jy  sigma=0.053308
! Fit after  self-cal, rms=0.072306Jy  sigma=0.053226
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     KP        0.94     LA        0.97     MK        1.00*    
!   PT        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     KP        0.84     LA        0.99     MK        1.00*    
!   PT        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.93     KP        1.09     LA        0.95     MK        1.00*    
!   PT        1.05     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.86     KP        0.93     LA        0.89     MK        1.00*    
!   PT        0.94     
! 
! 
! Fit before self-cal, rms=0.072306Jy  sigma=0.053226
! Fit after  self-cal, rms=0.070423Jy  sigma=0.050571
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=23.03 mas, bmaj=46.58 mas, bpa=5.228 degrees
! Estimated noise=29.9328 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.012953 Jy
! Component: 100  -  total flux cleaned = -0.0106617 Jy
! Component: 150  -  total flux cleaned = -0.00671221 Jy
! Component: 200  -  total flux cleaned = -0.00323059 Jy
! Total flux subtracted in 200 components = -0.00323059 Jy
! Clean residual min=-0.004227 max=0.004261 Jy/beam
! Clean residual mean=0.000003 rms=0.001037 Jy/beam
! Combined flux in latest and established models = 0.0745689 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 99 components and 0.0745689 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061836Jy  sigma=0.053890
! Fit after  self-cal, rms=0.061728Jy  sigma=0.053810
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061728Jy  sigma=0.053810
! Fit after  self-cal, rms=0.058868Jy  sigma=0.050297
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=22.63 mas, bmaj=47.06 mas, bpa=4.328 degrees
! Estimated noise=25.1404 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0108846 Jy
! Component: 100  -  total flux cleaned = -0.0115062 Jy
! Component: 150  -  total flux cleaned = -0.00902294 Jy
! Component: 200  -  total flux cleaned = -0.00682736 Jy
! Total flux subtracted in 200 components = -0.00682736 Jy
! Clean residual min=-0.002443 max=0.002475 Jy/beam
! Clean residual mean=-0.000001 rms=0.000631 Jy/beam
! Combined flux in latest and established models = 0.0677415 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 125 components and 0.0677416 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051993Jy  sigma=0.053228
! Fit after  self-cal, rms=0.051955Jy  sigma=0.053205
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000996576 Jy
! Component: 100  -  total flux cleaned = 0.00106962 Jy
! Component: 150  -  total flux cleaned = 0.000656766 Jy
! Component: 200  -  total flux cleaned = 0.000124555 Jy
! Total flux subtracted in 200 components = 0.000124555 Jy
! Clean residual min=-0.001006 max=0.000975 Jy/beam
! Clean residual mean=0.000009 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.0678661 Jy
! Performing phase self-cal
! Adding 81 model components to the UV plane model.
! The established model now contains 206 components and 0.0678661 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052356Jy  sigma=0.052521
! Fit after  self-cal, rms=0.052333Jy  sigma=0.052499
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052333Jy  sigma=0.052499
! Fit after  self-cal, rms=0.050778Jy  sigma=0.049898
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=22.24 mas, bmaj=47.51 mas, bpa=3.655 degrees
! Estimated noise=21.6634 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0093721 Jy
! Component: 100  -  total flux cleaned = -0.0102302 Jy
! Component: 150  -  total flux cleaned = -0.00891851 Jy
! Component: 200  -  total flux cleaned = -0.00735161 Jy
! Total flux subtracted in 200 components = -0.00735161 Jy
! Clean residual min=-0.001411 max=0.001428 Jy/beam
! Clean residual mean=-0.000005 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.0605145 Jy
selfcal
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 241 components and 0.0605145 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.045071Jy  sigma=0.052584
! Fit after  self-cal, rms=0.045021Jy  sigma=0.052550
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000399468 Jy
! Component: 100  -  total flux cleaned = 0.000361841 Jy
! Component: 150  -  total flux cleaned = 0.000291262 Jy
! Component: 200  -  total flux cleaned = 0.00020821 Jy
! Total flux subtracted in 200 components = 0.00020821 Jy
! Clean residual min=-0.000726 max=0.000729 Jy/beam
! Clean residual mean=0.000005 rms=0.000262 Jy/beam
! Combined flux in latest and established models = 0.0607227 Jy
! Performing phase self-cal
! Adding 66 model components to the UV plane model.
! The established model now contains 307 components and 0.0607227 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.045078Jy  sigma=0.052350
! Fit after  self-cal, rms=0.045077Jy  sigma=0.052335
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.045077Jy  sigma=0.052335
! Fit after  self-cal, rms=0.043932Jy  sigma=0.049605
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=22.3 mas, bmaj=47.64 mas, bpa=3.102 degrees
! Estimated noise=18.6205 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00799212 Jy
! Component: 100  -  total flux cleaned = -0.00788792 Jy
! Component: 150  -  total flux cleaned = -0.00759588 Jy
! Component: 200  -  total flux cleaned = -0.0062257 Jy
! Total flux subtracted in 200 components = -0.0062257 Jy
! Clean residual min=-0.001045 max=0.001048 Jy/beam
! Clean residual mean=-0.000010 rms=0.000311 Jy/beam
! Combined flux in latest and established models = 0.054497 Jy
selfcal
! Performing phase self-cal
! Adding 77 model components to the UV plane model.
! The established model now contains 365 components and 0.054497 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.039089Jy  sigma=0.052196
! Fit after  self-cal, rms=0.039049Jy  sigma=0.052163
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.00292e-05 Jy
! Component: 100  -  total flux cleaned = -3.77105e-05 Jy
! Component: 150  -  total flux cleaned = -8.90084e-05 Jy
! Component: 200  -  total flux cleaned = -0.000170408 Jy
! Total flux subtracted in 200 components = -0.000170408 Jy
! Clean residual min=-0.000483 max=0.000494 Jy/beam
! Clean residual mean=0.000002 rms=0.000166 Jy/beam
! Combined flux in latest and established models = 0.0543266 Jy
! Performing phase self-cal
! Adding 63 model components to the UV plane model.
! The established model now contains 422 components and 0.0543266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.039047Jy  sigma=0.052074
! Fit after  self-cal, rms=0.039070Jy  sigma=0.052062
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=21.88 mas, bmaj=47.95 mas, bpa=3.102 degrees
! Estimated noise=18.6032 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 21.88 x 47.95 at 3.102 degrees (North through East)
! Clean map  min=-0.01478  max=0.047551 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=25.2 mas, bmaj=45.45 mas, bpa=9.329 degrees
! Estimated noise=22.2829 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0362037 Jy
! Component: 100  -  total flux cleaned = 0.0391811 Jy
! Component: 150  -  total flux cleaned = 0.03591 Jy
! Component: 200  -  total flux cleaned = 0.0331326 Jy
! Total flux subtracted in 200 components = 0.0331326 Jy
! Clean residual min=-0.009183 max=0.009167 Jy/beam
! Clean residual mean=0.000066 rms=0.002882 Jy/beam
! Combined flux in latest and established models = 0.0331326 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 70 model components to the UV plane model.
! The established model now contains 70 components and 0.0331326 Jy
! Inverting map and beam 
! Estimated beam: bmin=21.88 mas, bmaj=47.95 mas, bpa=3.102 degrees
! Estimated noise=18.6032 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00214016 Jy
! Component: 100  -  total flux cleaned = 0.00235453 Jy
! Component: 150  -  total flux cleaned = 0.00227419 Jy
! Component: 200  -  total flux cleaned = 0.00249285 Jy
! Total flux subtracted in 200 components = 0.00249285 Jy
! Clean residual min=-0.001212 max=0.001203 Jy/beam
! Clean residual mean=0.000036 rms=0.000463 Jy/beam
! Combined flux in latest and established models = 0.0356255 Jy
! Adding 86 model components to the UV plane model.
! The established model now contains 156 components and 0.0356255 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=22.3 mas, bmaj=47.64 mas, bpa=3.102 degrees
! Estimated noise=18.6205 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000195179 Jy
! Component: 100  -  total flux cleaned = 7.68148e-05 Jy
! Component: 150  -  total flux cleaned = 1.15012e-05 Jy
! Component: 200  -  total flux cleaned = 0.000131676 Jy
! Total flux subtracted in 200 components = 0.000131676 Jy
! Clean residual min=-0.000487 max=0.000503 Jy/beam
! Clean residual mean=0.000013 rms=0.000194 Jy/beam
! Combined flux in latest and established models = 0.0357571 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000181484 Jy
! Component: 100  -  total flux cleaned = 0.000408094 Jy
! Component: 150  -  total flux cleaned = 0.000592015 Jy
! Component: 200  -  total flux cleaned = 0.000817688 Jy
! Total flux subtracted in 200 components = 0.000817688 Jy
! Clean residual min=-0.000794 max=0.000789 Jy/beam
! Clean residual mean=0.000015 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.0365748 Jy
! Adding 154 model components to the UV plane model.
! The established model now contains 310 components and 0.0365748 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=21.88 mas, bmaj=47.95 mas, bpa=3.102 degrees
! Estimated noise=18.6032 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.33291e-06 Jy
! Component: 100  -  total flux cleaned = 6.65317e-06 Jy
! Component: 150  -  total flux cleaned = 8.47564e-06 Jy
! Component: 200  -  total flux cleaned = 1.04519e-05 Jy
! Total flux subtracted in 200 components = 1.04519e-05 Jy
! Clean residual min=-0.000859 max=0.000831 Jy/beam
! Clean residual mean=0.000007 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.0365853 Jy
selfcal
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 361 components and 0.0365853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.039378Jy  sigma=0.051858
! Fit after  self-cal, rms=0.039413Jy  sigma=0.051822
wmodel /g0/scr/pima/npcsc_uvs/J0131+8446_S_map.mod
! Writing 361 model components to file: /g0/scr/pima/npcsc_uvs/J0131+8446_S_map.mod
wobs /g0/scr/pima/npcsc_uvs/J0131+8446_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J0131+8446_S_uvs.fits
wwins /g0/scr/pima/npcsc_uvs/J0131+8446_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/g0/scr/pima/npcsc_uvs/J0131+8446_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 21.88 x 47.95 at 3.102 degrees (North through East)
! Clean map  min=-0.0284  max=0.048765 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J0131+8446_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0487655 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00032426 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.99481 1.99481 3.98962 7.97925 15.9585 31.917 63.834
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0009 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.048 
quit
! Quitting program
! Log file /g0/scr/pima/npcsc_uvs/J0131+8446_S_uvs.log closed on Sun Oct  6 14:25:54 2013