! Started logfile: /g0/scr/pima/npcsc_uvs/J0013+7748_S_uvs.log on Sun Oct  6 14:25:38 2013
obs /g0/scr/pima/npcsc_uvs/J0013+7748_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J0013+7748_S_uva.fits
! AN table 1: 46 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.8 visibilities/baseline/integration-bin.
! Found source: J0013+7748
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1472 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J0013+7748_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.054427Jy  sigma=1.742471
! Fit after  self-cal, rms=0.863418Jy  sigma=1.092474
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=23.98 mas, bmaj=35.09 mas, bpa=6.477 degrees
! Estimated noise=21.3959 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.17912 Jy
! Component: 100  -  total flux cleaned = 0.157376 Jy
! Total flux subtracted in 100 components = 0.157376 Jy
! Clean residual min=-0.049962 max=0.050284 Jy/beam
! Clean residual mean=0.001997 rms=0.028817 Jy/beam
! Combined flux in latest and established models = 0.157376 Jy
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 62 components and 0.157376 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101463Jy  sigma=0.185426
! Fit after  self-cal, rms=0.098874Jy  sigma=0.183416
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=20.84 mas, bmaj=39.27 mas, bpa=11.53 degrees
! Estimated noise=14.6195 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00472472 Jy
! Component: 100  -  total flux cleaned = -0.0102485 Jy
! Component: 150  -  total flux cleaned = -0.00633867 Jy
! Component: 200  -  total flux cleaned = -0.00353033 Jy
! Total flux subtracted in 200 components = -0.00353033 Jy
! Clean residual min=-0.011118 max=0.011199 Jy/beam
! Clean residual mean=0.000337 rms=0.004060 Jy/beam
! Combined flux in latest and established models = 0.153846 Jy
! Performing phase self-cal
! Adding 112 model components to the UV plane model.
! The established model now contains 174 components and 0.153846 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089248Jy  sigma=0.128254
! Fit after  self-cal, rms=0.088309Jy  sigma=0.127397
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.82     KP        0.94     LA        0.98     OV        1.03     
!   PT        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.92     KP        0.89     LA        1.04     OV        0.87     
!   PT        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     KP        1.03     LA        1.03     OV        0.86     
!   PT        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     KP        0.90     LA        0.84     OV        0.69     
!   PT        0.91     
! 
! 
! Fit before self-cal, rms=0.088309Jy  sigma=0.127397
! Fit after  self-cal, rms=0.080402Jy  sigma=0.108610
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=20.25 mas, bmaj=39.11 mas, bpa=12.5 degrees
! Estimated noise=13.0571 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00706573 Jy
! Component: 100  -  total flux cleaned = -0.00632695 Jy
! Component: 150  -  total flux cleaned = -0.00616458 Jy
! Component: 200  -  total flux cleaned = -0.00615593 Jy
! Total flux subtracted in 200 components = -0.00615593 Jy
! Clean residual min=-0.002074 max=0.002070 Jy/beam
! Clean residual mean=0.000005 rms=0.000797 Jy/beam
! Combined flux in latest and established models = 0.14769 Jy
! Performing phase self-cal
! Adding 66 model components to the UV plane model.
! The established model now contains 238 components and 0.14769 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075371Jy  sigma=0.110182
! Fit after  self-cal, rms=0.075257Jy  sigma=0.110082
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075257Jy  sigma=0.110082
! Fit after  self-cal, rms=0.072785Jy  sigma=0.108130
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=19.84 mas, bmaj=39.09 mas, bpa=13.16 degrees
! Estimated noise=12.0417 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00772631 Jy
! Component: 100  -  total flux cleaned = -0.00634569 Jy
! Component: 150  -  total flux cleaned = -0.00596759 Jy
! Component: 200  -  total flux cleaned = -0.00645808 Jy
! Total flux subtracted in 200 components = -0.00645808 Jy
! Clean residual min=-0.001553 max=0.001557 Jy/beam
! Clean residual mean=0.000002 rms=0.000587 Jy/beam
! Combined flux in latest and established models = 0.141232 Jy
selfcal
! Performing phase self-cal
! Adding 69 model components to the UV plane model.
! The established model now contains 298 components and 0.141232 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068456Jy  sigma=0.109852
! Fit after  self-cal, rms=0.068361Jy  sigma=0.109779
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000417447 Jy
! Component: 100  -  total flux cleaned = 0.00032816 Jy
! Component: 150  -  total flux cleaned = -2.40012e-05 Jy
! Component: 200  -  total flux cleaned = -5.88077e-06 Jy
! Total flux subtracted in 200 components = -5.88077e-06 Jy
! Clean residual min=-0.002814 max=0.002694 Jy/beam
! Clean residual mean=0.000007 rms=0.000552 Jy/beam
! Combined flux in latest and established models = 0.141226 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 334 components and 0.141226 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068091Jy  sigma=0.109636
! Fit after  self-cal, rms=0.068026Jy  sigma=0.109569
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068026Jy  sigma=0.109569
! Fit after  self-cal, rms=0.065764Jy  sigma=0.107459
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=19.32 mas, bmaj=39.15 mas, bpa=14.02 degrees
! Estimated noise=11.0391 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00743812 Jy
! Component: 100  -  total flux cleaned = -0.00728739 Jy
! Component: 150  -  total flux cleaned = -0.00757012 Jy
! Component: 200  -  total flux cleaned = -0.00782308 Jy
! Total flux subtracted in 200 components = -0.00782308 Jy
! Clean residual min=-0.001354 max=0.001352 Jy/beam
! Clean residual mean=0.000000 rms=0.000448 Jy/beam
! Combined flux in latest and established models = 0.133403 Jy
selfcal
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 401 components and 0.133403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062309Jy  sigma=0.109206
! Fit after  self-cal, rms=0.062226Jy  sigma=0.109153
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000314176 Jy
! Component: 100  -  total flux cleaned = 0.000317533 Jy
! Component: 150  -  total flux cleaned = 0.000372401 Jy
! Component: 200  -  total flux cleaned = 0.000131669 Jy
! Total flux subtracted in 200 components = 0.000131669 Jy
! Clean residual min=-0.001008 max=0.001005 Jy/beam
! Clean residual mean=-0.000001 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.133535 Jy
! Performing phase self-cal
! Adding 69 model components to the UV plane model.
! The established model now contains 465 components and 0.133535 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061936Jy  sigma=0.109311
! Fit after  self-cal, rms=0.061935Jy  sigma=0.109279
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061935Jy  sigma=0.109279
! Fit after  self-cal, rms=0.059940Jy  sigma=0.107107
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=19.31 mas, bmaj=39.13 mas, bpa=14.67 degrees
! Estimated noise=9.9791 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00639011 Jy
! Component: 100  -  total flux cleaned = -0.00672262 Jy
! Component: 150  -  total flux cleaned = -0.00656428 Jy
! Component: 200  -  total flux cleaned = -0.00709031 Jy
! Total flux subtracted in 200 components = -0.00709031 Jy
! Clean residual min=-0.001042 max=0.001032 Jy/beam
! Clean residual mean=-0.000005 rms=0.000394 Jy/beam
! Combined flux in latest and established models = 0.126444 Jy
selfcal
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 529 components and 0.126444 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057004Jy  sigma=0.108863
! Fit after  self-cal, rms=0.056955Jy  sigma=0.108821
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.03221e-05 Jy
! Component: 100  -  total flux cleaned = -9.16207e-05 Jy
! Component: 150  -  total flux cleaned = 5.72156e-05 Jy
! Component: 200  -  total flux cleaned = 0.000204751 Jy
! Total flux subtracted in 200 components = 0.000204751 Jy
! Clean residual min=-0.000815 max=0.000820 Jy/beam
! Clean residual mean=0.000001 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.126649 Jy
! Performing phase self-cal
! Adding 71 model components to the UV plane model.
! The established model now contains 587 components and 0.126649 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056671Jy  sigma=0.109045
! Fit after  self-cal, rms=0.056666Jy  sigma=0.109023
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=18.85 mas, bmaj=39.2 mas, bpa=14.79 degrees
! Estimated noise=10.0822 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 18.85 x 39.2 at 14.79 degrees (North through East)
! Clean map  min=-0.033567  max=0.088544 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=21.84 mas, bmaj=34.42 mas, bpa=11.39 degrees
! Estimated noise=15.364 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.118979 Jy
! Component: 100  -  total flux cleaned = 0.107099 Jy
! Component: 150  -  total flux cleaned = 0.144665 Jy
! Component: 200  -  total flux cleaned = 0.196451 Jy
! Total flux subtracted in 200 components = 0.196451 Jy
! Clean residual min=-0.033967 max=0.033953 Jy/beam
! Clean residual mean=0.000802 rms=0.010975 Jy/beam
! Combined flux in latest and established models = 0.196451 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 104 model components to the UV plane model.
! The established model now contains 104 components and 0.196451 Jy
! Inverting map and beam 
! Estimated beam: bmin=18.85 mas, bmaj=39.2 mas, bpa=14.79 degrees
! Estimated noise=10.0822 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00654161 Jy
! Component: 100  -  total flux cleaned = 0.00874795 Jy
! Component: 150  -  total flux cleaned = 0.00759967 Jy
! Component: 200  -  total flux cleaned = 0.00551347 Jy
! Total flux subtracted in 200 components = 0.00551347 Jy
! Clean residual min=-0.008285 max=0.008287 Jy/beam
! Clean residual mean=0.000068 rms=0.003427 Jy/beam
! Combined flux in latest and established models = 0.201964 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 165 components and 0.201964 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=19.31 mas, bmaj=39.13 mas, bpa=14.67 degrees
! Estimated noise=9.9791 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000707669 Jy
! Component: 100  -  total flux cleaned = 0.000747858 Jy
! Component: 150  -  total flux cleaned = 0.00101618 Jy
! Component: 200  -  total flux cleaned = 0.00163028 Jy
! Total flux subtracted in 200 components = 0.00163028 Jy
! Clean residual min=-0.005616 max=0.005590 Jy/beam
! Clean residual mean=0.000036 rms=0.001500 Jy/beam
! Combined flux in latest and established models = 0.203595 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000773616 Jy
! Component: 100  -  total flux cleaned = 0.000753064 Jy
! Component: 150  -  total flux cleaned = -0.00110511 Jy
! Component: 200  -  total flux cleaned = -0.00276198 Jy
! Total flux subtracted in 200 components = -0.00276198 Jy
! Clean residual min=-0.015668 max=0.015560 Jy/beam
! Clean residual mean=0.000075 rms=0.003836 Jy/beam
! Combined flux in latest and established models = 0.200833 Jy
! Adding 69 model components to the UV plane model.
! The established model now contains 234 components and 0.200833 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=18.85 mas, bmaj=39.2 mas, bpa=14.79 degrees
! Estimated noise=10.0822 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.31053e-05 Jy
! Component: 100  -  total flux cleaned = -3.44075e-05 Jy
! Component: 150  -  total flux cleaned = 0.00206473 Jy
! Component: 200  -  total flux cleaned = 0.00387865 Jy
! Total flux subtracted in 200 components = 0.00387865 Jy
! Clean residual min=-0.017333 max=0.018269 Jy/beam
! Clean residual mean=-0.000022 rms=0.002869 Jy/beam
! Combined flux in latest and established models = 0.204711 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 253 components and 0.204711 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058415Jy  sigma=0.112939
! Fit after  self-cal, rms=0.058125Jy  sigma=0.111898
wmodel /g0/scr/pima/npcsc_uvs/J0013+7748_S_map.mod
! Writing 253 model components to file: /g0/scr/pima/npcsc_uvs/J0013+7748_S_map.mod
wobs /g0/scr/pima/npcsc_uvs/J0013+7748_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J0013+7748_S_uvs.fits
wwins /g0/scr/pima/npcsc_uvs/J0013+7748_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/g0/scr/pima/npcsc_uvs/J0013+7748_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 18.85 x 39.2 at 14.79 degrees (North through East)
! Clean map  min=-0.039092  max=0.067562 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J0013+7748_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0675623 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00119319 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -5.29817 5.29817 10.5963 21.1927 42.3854 84.7708
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0035 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.067 
quit
! Quitting program
! Log file /g0/scr/pima/npcsc_uvs/J0013+7748_S_uvs.log closed on Sun Oct  6 14:25:42 2013