! Started logfile: /g0/scr/pima/npcsc_uvs/J0009+7724_X_uvs.log on Sun Oct 6 14:22:23 2013 obs /g0/scr/pima/npcsc_uvs/J0009+7724_X_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J0009+7724_X_uva.fits ! AN table 1: 46 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.678744 visibilities/baseline/integration-bin. ! Found source: J0009+7724 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 5620 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J0009+7724_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.003575Jy sigma=0.768020 ! Fit after self-cal, rms=0.955831Jy sigma=0.696722 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5713 mas, bmaj=3.62 mas, bpa=-3.376 degrees ! Estimated noise=25.8538 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0546161 Jy ! Component: 100 - total flux cleaned = 0.0665409 Jy ! Total flux subtracted in 100 components = 0.0665409 Jy ! Clean residual min=-0.006944 max=0.007745 Jy/beam ! Clean residual mean=0.000003 rms=0.001823 Jy/beam ! Combined flux in latest and established models = 0.0665409 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0665409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085595Jy sigma=0.072407 ! Fit after self-cal, rms=0.083590Jy sigma=0.071227 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8074 mas, bmaj=3.39 mas, bpa=-3.28 degrees ! Estimated noise=14.1181 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00775548 Jy ! Component: 100 - total flux cleaned = 0.00978577 Jy ! Component: 150 - total flux cleaned = 0.00952595 Jy ! Component: 200 - total flux cleaned = 0.00923956 Jy ! Total flux subtracted in 200 components = 0.00923956 Jy ! Clean residual min=-0.006038 max=0.006582 Jy/beam ! Clean residual mean=0.000005 rms=0.001580 Jy/beam ! Combined flux in latest and established models = 0.0757804 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0757804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084952Jy sigma=0.069388 ! Fit after self-cal, rms=0.084828Jy sigma=0.069319 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 0.74 HN 1.00* KP 1.00 ! LA 0.85 MK 0.84 NL 1.08 OV 0.88 ! PT 1.08 SC 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.70 HN 1.00* KP 0.85 ! LA 0.97 MK 0.96 NL 1.00 OV 0.86 ! PT 1.01 SC 0.80 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 0.57 HN 1.00* KP 0.81 ! LA 0.89 MK 0.84 NL 0.93 OV 0.89 ! PT 1.01 SC 0.84 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.60 HN 1.00* KP 0.82 ! LA 0.81 MK 0.76 NL 0.89 OV 0.95 ! PT 1.04 SC 0.76 ! ! ! Fit before self-cal, rms=0.084828Jy sigma=0.069319 ! Fit after self-cal, rms=0.070990Jy sigma=0.065538 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7982 mas, bmaj=3.312 mas, bpa=-3.014 degrees ! Estimated noise=10.7322 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.013186 Jy ! Component: 100 - total flux cleaned = -0.0157768 Jy ! Component: 150 - total flux cleaned = -0.0154267 Jy ! Component: 200 - total flux cleaned = -0.0153926 Jy ! Total flux subtracted in 200 components = -0.0153926 Jy ! Clean residual min=-0.002743 max=0.002971 Jy/beam ! Clean residual mean=0.000002 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 0.0603878 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 20 components and 0.0603878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064474Jy sigma=0.067617 ! Fit after self-cal, rms=0.064540Jy sigma=0.067456 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064540Jy sigma=0.067456 ! Fit after self-cal, rms=0.055320Jy sigma=0.065286 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7874 mas, bmaj=3.314 mas, bpa=-3.036 degrees ! Estimated noise=8.3376 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0102361 Jy ! Component: 100 - total flux cleaned = -0.0125108 Jy ! Component: 150 - total flux cleaned = -0.012532 Jy ! Component: 200 - total flux cleaned = -0.0125313 Jy ! Total flux subtracted in 200 components = -0.0125313 Jy ! Clean residual min=-0.002219 max=0.002263 Jy/beam ! Clean residual mean=0.000002 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.0478565 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 24 components and 0.0478565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050258Jy sigma=0.067397 ! Fit after self-cal, rms=0.050275Jy sigma=0.067392 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.4475e-05 Jy ! Component: 100 - total flux cleaned = -2.48243e-05 Jy ! Component: 150 - total flux cleaned = 2.32844e-05 Jy ! Component: 200 - total flux cleaned = 3.65313e-05 Jy ! Total flux subtracted in 200 components = 3.65313e-05 Jy ! Clean residual min=-0.002180 max=0.002221 Jy/beam ! Clean residual mean=0.000002 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.047893 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 29 components and 0.047893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050216Jy sigma=0.067434 ! Fit after self-cal, rms=0.050221Jy sigma=0.067429 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050221Jy sigma=0.067429 ! Fit after self-cal, rms=0.042820Jy sigma=0.065230 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7794 mas, bmaj=3.32 mas, bpa=-3.041 degrees ! Estimated noise=6.45156 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00792338 Jy ! Component: 100 - total flux cleaned = -0.00968205 Jy ! Component: 150 - total flux cleaned = -0.0100708 Jy ! Component: 200 - total flux cleaned = -0.0101004 Jy ! Total flux subtracted in 200 components = -0.0101004 Jy ! Clean residual min=-0.001666 max=0.001721 Jy/beam ! Clean residual mean=0.000001 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.0377926 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 34 components and 0.0377926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.038878Jy sigma=0.067389 ! Fit after self-cal, rms=0.038878Jy sigma=0.067383 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.05634e-05 Jy ! Component: 100 - total flux cleaned = -2.10515e-05 Jy ! Component: 150 - total flux cleaned = -3.04514e-05 Jy ! Component: 200 - total flux cleaned = -3.87356e-05 Jy ! Total flux subtracted in 200 components = -3.87356e-05 Jy ! Clean residual min=-0.001652 max=0.001708 Jy/beam ! Clean residual mean=0.000001 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.0377539 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 37 components and 0.0377539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.038853Jy sigma=0.067407 ! Fit after self-cal, rms=0.038855Jy sigma=0.067404 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.038855Jy sigma=0.067404 ! Fit after self-cal, rms=0.033100Jy sigma=0.065194 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.109 mas, bmaj=3.342 mas, bpa=9.4 degrees ! Estimated noise=6.53266 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00607354 Jy ! Component: 100 - total flux cleaned = -0.00740197 Jy ! Component: 150 - total flux cleaned = -0.00768511 Jy ! Component: 200 - total flux cleaned = -0.00770921 Jy ! Total flux subtracted in 200 components = -0.00770921 Jy ! Clean residual min=-0.001493 max=0.001842 Jy/beam ! Clean residual mean=0.000001 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.0300447 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 41 components and 0.0300447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.030091Jy sigma=0.067321 ! Fit after self-cal, rms=0.030074Jy sigma=0.067311 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.68357e-05 Jy ! Component: 100 - total flux cleaned = 1.56846e-05 Jy ! Component: 150 - total flux cleaned = -5.55059e-05 Jy ! Component: 200 - total flux cleaned = -0.000101944 Jy ! Total flux subtracted in 200 components = -0.000101944 Jy ! Clean residual min=-0.001458 max=0.001851 Jy/beam ! Clean residual mean=0.000001 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.0299428 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 44 components and 0.0299428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.030060Jy sigma=0.067369 ! Fit after self-cal, rms=0.030039Jy sigma=0.067345 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.7704 mas, bmaj=3.332 mas, bpa=-3.047 degrees ! Estimated noise=4.98414 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7704 x 3.332 at -3.047 degrees (North through East) ! Clean map min=-0.0015822 max=0.02552 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5452 mas, bmaj=3.608 mas, bpa=-3.302 degrees ! Estimated noise=8.63296 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0189797 Jy ! Component: 100 - total flux cleaned = 0.0237027 Jy ! Component: 150 - total flux cleaned = 0.0255667 Jy ! Component: 200 - total flux cleaned = 0.0261485 Jy ! Total flux subtracted in 200 components = 0.0261485 Jy ! Clean residual min=-0.002176 max=0.002557 Jy/beam ! Clean residual mean=0.000001 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.0261485 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0261485 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7704 mas, bmaj=3.332 mas, bpa=-3.047 degrees ! Estimated noise=4.98414 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209113 Jy ! Component: 100 - total flux cleaned = 0.00247686 Jy ! Component: 150 - total flux cleaned = 0.0027823 Jy ! Component: 200 - total flux cleaned = 0.00307628 Jy ! Total flux subtracted in 200 components = 0.00307628 Jy ! Clean residual min=-0.001358 max=0.001408 Jy/beam ! Clean residual mean=0.000001 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.0292248 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 22 components and 0.0292248 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.109 mas, bmaj=3.342 mas, bpa=9.4 degrees ! Estimated noise=6.53266 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000410473 Jy ! Component: 100 - total flux cleaned = 0.000342732 Jy ! Component: 150 - total flux cleaned = 0.000290835 Jy ! Component: 200 - total flux cleaned = 0.000235256 Jy ! Total flux subtracted in 200 components = 0.000235256 Jy ! Clean residual min=-0.001328 max=0.001752 Jy/beam ! Clean residual mean=0.000001 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.02946 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.47416e-05 Jy ! Component: 100 - total flux cleaned = -7.42554e-05 Jy ! Component: 150 - total flux cleaned = -0.000109074 Jy ! Component: 200 - total flux cleaned = -0.000125067 Jy ! Total flux subtracted in 200 components = -0.000125067 Jy ! Clean residual min=-0.001348 max=0.001722 Jy/beam ! Clean residual mean=0.000001 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.029335 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 39 components and 0.029335 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7704 mas, bmaj=3.332 mas, bpa=-3.047 degrees ! Estimated noise=4.98414 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000309446 Jy ! Component: 100 - total flux cleaned = -0.000335276 Jy ! Component: 150 - total flux cleaned = -0.000288175 Jy ! Component: 200 - total flux cleaned = -0.000234823 Jy ! Total flux subtracted in 200 components = -0.000234823 Jy ! Clean residual min=-0.001273 max=0.001320 Jy/beam ! Clean residual mean=0.000001 rms=0.000321 Jy/beam ! Combined flux in latest and established models = 0.0291001 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 50 components and 0.0291001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.029958Jy sigma=0.067401 ! Fit after self-cal, rms=0.029955Jy sigma=0.067355 wmodel /g0/scr/pima/npcsc_uvs/J0009+7724_X_map.mod ! Writing 50 model components to file: /g0/scr/pima/npcsc_uvs/J0009+7724_X_map.mod wobs /g0/scr/pima/npcsc_uvs/J0009+7724_X_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J0009+7724_X_uvs.fits wwins /g0/scr/pima/npcsc_uvs/J0009+7724_X_map.win ! wwins: Wrote 2 windows to /g0/scr/pima/npcsc_uvs/J0009+7724_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000174605 Jy ! Component: 100 - total flux cleaned = -1.74065e-05 Jy ! Component: 150 - total flux cleaned = -7.86491e-05 Jy ! Component: 200 - total flux cleaned = -5.93225e-05 Jy ! Component: 250 - total flux cleaned = -9.69721e-05 Jy ! Component: 300 - total flux cleaned = -0.00015177 Jy ! Component: 350 - total flux cleaned = -0.000170037 Jy ! Component: 400 - total flux cleaned = -0.000205528 Jy ! Component: 450 - total flux cleaned = -0.000257362 Jy ! Component: 500 - total flux cleaned = -0.00035805 Jy ! Component: 550 - total flux cleaned = -0.000440464 Jy ! Component: 600 - total flux cleaned = -0.000537217 Jy ! Component: 650 - total flux cleaned = -0.00061621 Jy ! Component: 700 - total flux cleaned = -0.000693515 Jy ! Component: 750 - total flux cleaned = -0.000708704 Jy ! Component: 800 - total flux cleaned = -0.000723864 Jy ! Component: 850 - total flux cleaned = -0.000798196 Jy ! Component: 900 - total flux cleaned = -0.000827161 Jy ! Component: 950 - total flux cleaned = -0.000827247 Jy ! Component: 1000 - total flux cleaned = -0.000827272 Jy ! Component: 1050 - total flux cleaned = -0.000869058 Jy ! Component: 1100 - total flux cleaned = -0.000883114 Jy ! Component: 1150 - total flux cleaned = -0.000936774 Jy ! Component: 1200 - total flux cleaned = -0.000910105 Jy ! Component: 1250 - total flux cleaned = -0.0008841 Jy ! Component: 1300 - total flux cleaned = -0.000871448 Jy ! Component: 1350 - total flux cleaned = -0.000871435 Jy ! Component: 1400 - total flux cleaned = -0.000858876 Jy ! Component: 1450 - total flux cleaned = -0.000883924 Jy ! Component: 1500 - total flux cleaned = -0.00084692 Jy ! Component: 1550 - total flux cleaned = -0.000859047 Jy ! Component: 1600 - total flux cleaned = -0.000859178 Jy ! Component: 1650 - total flux cleaned = -0.000811653 Jy ! Component: 1700 - total flux cleaned = -0.000811575 Jy ! Component: 1750 - total flux cleaned = -0.000764894 Jy ! Component: 1800 - total flux cleaned = -0.000730376 Jy ! Component: 1850 - total flux cleaned = -0.000718947 Jy ! Component: 1900 - total flux cleaned = -0.000718888 Jy ! Component: 1950 - total flux cleaned = -0.000718667 Jy ! Component: 2000 - total flux cleaned = -0.000674211 Jy ! Component: 2050 - total flux cleaned = -0.000696075 Jy ! Component: 2100 - total flux cleaned = -0.00066335 Jy ! Component: 2150 - total flux cleaned = -0.00060941 Jy ! Component: 2200 - total flux cleaned = -0.000577511 Jy ! Component: 2250 - total flux cleaned = -0.000619778 Jy ! Component: 2300 - total flux cleaned = -0.000546127 Jy ! Component: 2350 - total flux cleaned = -0.000535652 Jy ! Component: 2400 - total flux cleaned = -0.000453226 Jy ! Component: 2450 - total flux cleaned = -0.000463559 Jy ! Component: 2500 - total flux cleaned = -0.000392587 Jy ! Component: 2550 - total flux cleaned = -0.000372485 Jy ! Component: 2600 - total flux cleaned = -0.000342534 Jy ! Component: 2650 - total flux cleaned = -0.000312819 Jy ! Component: 2700 - total flux cleaned = -0.000244021 Jy ! Component: 2750 - total flux cleaned = -0.000253866 Jy ! Component: 2800 - total flux cleaned = -0.000195728 Jy ! Component: 2850 - total flux cleaned = -0.000157226 Jy ! Component: 2900 - total flux cleaned = -0.000109541 Jy ! Component: 2950 - total flux cleaned = -9.99963e-05 Jy ! Component: 3000 - total flux cleaned = -6.22637e-05 Jy ! Component: 3050 - total flux cleaned = 2.19504e-05 Jy ! Component: 3100 - total flux cleaned = 6.83681e-05 Jy ! Component: 3150 - total flux cleaned = 0.000123772 Jy ! Component: 3200 - total flux cleaned = 0.000178868 Jy ! Component: 3250 - total flux cleaned = 0.000215286 Jy ! Component: 3300 - total flux cleaned = 0.000233495 Jy ! Component: 3350 - total flux cleaned = 0.000287629 Jy ! Component: 3400 - total flux cleaned = 0.000296629 Jy ! Component: 3450 - total flux cleaned = 0.000341171 Jy ! Component: 3500 - total flux cleaned = 0.000420733 Jy ! Component: 3550 - total flux cleaned = 0.000403115 Jy ! Component: 3600 - total flux cleaned = 0.000464295 Jy ! Component: 3650 - total flux cleaned = 0.000507587 Jy ! Component: 3700 - total flux cleaned = 0.000524725 Jy ! Component: 3750 - total flux cleaned = 0.000550488 Jy ! Component: 3800 - total flux cleaned = 0.000550511 Jy ! Component: 3850 - total flux cleaned = 0.000593034 Jy ! Component: 3900 - total flux cleaned = 0.000635336 Jy ! Component: 3950 - total flux cleaned = 0.000652199 Jy ! Component: 4000 - total flux cleaned = 0.000702469 Jy ! Component: 4050 - total flux cleaned = 0.000702416 Jy ! Total flux subtracted in 4096 components = 0.000727295 Jy ! Clean residual min=-0.000489 max=0.000510 Jy/beam ! Clean residual mean=0.000000 rms=0.000149 Jy/beam ! Combined flux in latest and established models = 0.0298274 Jy keep ! Adding 293 model components to the UV plane model. ! The established model now contains 343 components and 0.0298275 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsc_uvs/J0009+7724_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7704 x 3.332 at -3.047 degrees (North through East) ! Clean map min=-0.0016504 max=0.025648 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J0009+7724_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0256482 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000148424 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.73607 1.73607 3.47214 6.94428 13.8886 27.7771 55.5542 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.025 quit ! Quitting program ! Log file /g0/scr/pima/npcsc_uvs/J0009+7724_X_uvs.log closed on Sun Oct 6 14:22:27 2013