! Started logfile: /g0/scr/pima/npcsc_uvs/J0009+7724_S_uvs.log on Sun Oct 6 14:25:32 2013 obs /g0/scr/pima/npcsc_uvs/J0009+7724_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J0009+7724_S_uva.fits ! AN table 1: 46 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.417874 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0009+7724 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 3460 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J0009+7724_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.004639Jy sigma=0.767454 ! Fit after self-cal, rms=0.949340Jy sigma=0.690917 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.731 mas, bmaj=11.15 mas, bpa=1.571 degrees ! Estimated noise=34.7082 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0596034 Jy ! Component: 100 - total flux cleaned = 0.0735417 Jy ! Total flux subtracted in 100 components = 0.0735417 Jy ! Clean residual min=-0.011344 max=0.009721 Jy/beam ! Clean residual mean=0.000060 rms=0.002847 Jy/beam ! Combined flux in latest and established models = 0.0735416 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0735416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073612Jy sigma=0.059241 ! Fit after self-cal, rms=0.071614Jy sigma=0.058104 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.609 mas, bmaj=11.43 mas, bpa=0.6371 degrees ! Estimated noise=18.7722 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00775574 Jy ! Component: 100 - total flux cleaned = 0.0122246 Jy ! Component: 150 - total flux cleaned = 0.0150536 Jy ! Component: 200 - total flux cleaned = 0.0168665 Jy ! Total flux subtracted in 200 components = 0.0168665 Jy ! Clean residual min=-0.007580 max=0.006272 Jy/beam ! Clean residual mean=0.000070 rms=0.002067 Jy/beam ! Combined flux in latest and established models = 0.0904081 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 37 components and 0.0904081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073084Jy sigma=0.055893 ! Fit after self-cal, rms=0.072924Jy sigma=0.055780 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.82 HN 1.00* KP 0.89 ! LA 0.71 MK 0.84 NL 1.07 OV 0.93 ! PT 1.11 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.01 HN 1.00* KP 0.82 ! LA 0.73 MK 0.66 NL 1.00 OV 0.86 ! PT 0.98 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.74 HN 1.00* KP 0.78 ! LA 0.58 MK 0.86 NL 1.00 OV 0.93 ! PT 1.10 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.71 HN 1.00* KP 0.86 ! LA 0.54 MK 0.94 NL 0.98 OV 0.82 ! PT 0.92 SC 1.00* ! ! ! Fit before self-cal, rms=0.072924Jy sigma=0.055780 ! Fit after self-cal, rms=0.064628Jy sigma=0.051159 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.448 mas, bmaj=11.59 mas, bpa=1.225 degrees ! Estimated noise=14.8911 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0121476 Jy ! Component: 100 - total flux cleaned = -0.0151824 Jy ! Component: 150 - total flux cleaned = -0.0167431 Jy ! Component: 200 - total flux cleaned = -0.0173809 Jy ! Total flux subtracted in 200 components = -0.0173809 Jy ! Clean residual min=-0.002446 max=0.002708 Jy/beam ! Clean residual mean=0.000006 rms=0.000690 Jy/beam ! Combined flux in latest and established models = 0.0730272 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 59 components and 0.0730272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058180Jy sigma=0.053267 ! Fit after self-cal, rms=0.058346Jy sigma=0.053139 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058346Jy sigma=0.053139 ! Fit after self-cal, rms=0.052570Jy sigma=0.050933 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.425 mas, bmaj=11.62 mas, bpa=1.378 degrees ! Estimated noise=12.0509 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00979795 Jy ! Component: 100 - total flux cleaned = -0.0121295 Jy ! Component: 150 - total flux cleaned = -0.0132709 Jy ! Component: 200 - total flux cleaned = -0.0137295 Jy ! Total flux subtracted in 200 components = -0.0137295 Jy ! Clean residual min=-0.001873 max=0.002240 Jy/beam ! Clean residual mean=0.000005 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.0592977 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 71 components and 0.0592977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047401Jy sigma=0.053063 ! Fit after self-cal, rms=0.047410Jy sigma=0.053042 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000139213 Jy ! Component: 100 - total flux cleaned = -0.000163709 Jy ! Component: 150 - total flux cleaned = -0.000204649 Jy ! Component: 200 - total flux cleaned = -0.000240333 Jy ! Total flux subtracted in 200 components = -0.000240333 Jy ! Clean residual min=-0.001924 max=0.002171 Jy/beam ! Clean residual mean=0.000006 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.0590573 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 80 components and 0.0590573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047354Jy sigma=0.053065 ! Fit after self-cal, rms=0.047354Jy sigma=0.053053 ! Inverting map ! Added new window around map position (-58.5, 39.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141262 Jy ! Component: 100 - total flux cleaned = 0.00132479 Jy ! Component: 150 - total flux cleaned = 0.00128444 Jy ! Component: 200 - total flux cleaned = 0.00118106 Jy ! Total flux subtracted in 200 components = 0.00118106 Jy ! Clean residual min=-0.001652 max=0.001462 Jy/beam ! Clean residual mean=0.000001 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.0602384 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 114 components and 0.0602384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047196Jy sigma=0.052927 ! Fit after self-cal, rms=0.047217Jy sigma=0.052881 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047217Jy sigma=0.052881 ! Fit after self-cal, rms=0.042071Jy sigma=0.050622 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.414 mas, bmaj=11.6 mas, bpa=1.429 degrees ! Estimated noise=9.67235 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00790779 Jy ! Component: 100 - total flux cleaned = -0.00926484 Jy ! Component: 150 - total flux cleaned = -0.00965982 Jy ! Component: 200 - total flux cleaned = -0.00986673 Jy ! Total flux subtracted in 200 components = -0.00986673 Jy ! Clean residual min=-0.001321 max=0.001110 Jy/beam ! Clean residual mean=-0.000002 rms=0.000332 Jy/beam ! Combined flux in latest and established models = 0.0503717 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 130 components and 0.0503717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.037915Jy sigma=0.052645 ! Fit after self-cal, rms=0.037878Jy sigma=0.052608 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000314503 Jy ! Component: 100 - total flux cleaned = 0.000175545 Jy ! Component: 150 - total flux cleaned = 1.01074e-05 Jy ! Component: 200 - total flux cleaned = -9.57151e-05 Jy ! Total flux subtracted in 200 components = -9.57151e-05 Jy ! Clean residual min=-0.001191 max=0.001158 Jy/beam ! Clean residual mean=-0.000001 rms=0.000308 Jy/beam ! Combined flux in latest and established models = 0.050276 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 140 components and 0.0502759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.037784Jy sigma=0.052604 ! Fit after self-cal, rms=0.037771Jy sigma=0.052588 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.037771Jy sigma=0.052588 ! Fit after self-cal, rms=0.033728Jy sigma=0.050430 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.017 mas, bmaj=11.9 mas, bpa=1.539 degrees ! Estimated noise=8.81192 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00631862 Jy ! Component: 100 - total flux cleaned = -0.00780127 Jy ! Component: 150 - total flux cleaned = -0.00827834 Jy ! Component: 200 - total flux cleaned = -0.00833881 Jy ! Total flux subtracted in 200 components = -0.00833881 Jy ! Clean residual min=-0.000873 max=0.000982 Jy/beam ! Clean residual mean=-0.000002 rms=0.000238 Jy/beam ! Combined flux in latest and established models = 0.0419371 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 161 components and 0.0419371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.030415Jy sigma=0.052459 ! Fit after self-cal, rms=0.030396Jy sigma=0.052412 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000154777 Jy ! Component: 100 - total flux cleaned = 9.32143e-05 Jy ! Component: 150 - total flux cleaned = 4.3676e-05 Jy ! Component: 200 - total flux cleaned = 3.37377e-05 Jy ! Total flux subtracted in 200 components = 3.37377e-05 Jy ! Clean residual min=-0.000759 max=0.000857 Jy/beam ! Clean residual mean=-0.000002 rms=0.000208 Jy/beam ! Combined flux in latest and established models = 0.0419709 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 174 components and 0.0419709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.030350Jy sigma=0.052412 ! Fit after self-cal, rms=0.030339Jy sigma=0.052399 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.416 mas, bmaj=11.54 mas, bpa=1.506 degrees ! Estimated noise=7.79514 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.416 x 11.54 at 1.506 degrees (North through East) ! Clean map min=-0.0011983 max=0.032408 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.563 mas, bmaj=11.25 mas, bpa=2.572 degrees ! Estimated noise=14.1917 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0248319 Jy ! Component: 100 - total flux cleaned = 0.0318015 Jy ! Component: 150 - total flux cleaned = 0.0361633 Jy ! Component: 200 - total flux cleaned = 0.0376844 Jy ! Total flux subtracted in 200 components = 0.0376844 Jy ! Clean residual min=-0.003572 max=0.003236 Jy/beam ! Clean residual mean=0.000005 rms=0.000951 Jy/beam ! Combined flux in latest and established models = 0.0376844 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.0376844 Jy ! Inverting map and beam ! Estimated beam: bmin=4.416 mas, bmaj=11.54 mas, bpa=1.506 degrees ! Estimated noise=7.79514 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165297 Jy ! Component: 100 - total flux cleaned = 0.00218283 Jy ! Component: 150 - total flux cleaned = 0.00257256 Jy ! Component: 200 - total flux cleaned = 0.00290429 Jy ! Total flux subtracted in 200 components = 0.00290429 Jy ! Clean residual min=-0.001481 max=0.001626 Jy/beam ! Clean residual mean=0.000003 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.0405887 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 43 components and 0.0405887 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.017 mas, bmaj=11.9 mas, bpa=1.539 degrees ! Estimated noise=8.81192 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102228 Jy ! Component: 100 - total flux cleaned = 0.001261 Jy ! Component: 150 - total flux cleaned = 0.00140671 Jy ! Component: 200 - total flux cleaned = 0.00138528 Jy ! Total flux subtracted in 200 components = 0.00138528 Jy ! Clean residual min=-0.000974 max=0.000896 Jy/beam ! Clean residual mean=-0.000002 rms=0.000273 Jy/beam ! Combined flux in latest and established models = 0.041974 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.90884e-05 Jy ! Component: 100 - total flux cleaned = -7.47582e-05 Jy ! Component: 150 - total flux cleaned = -9.11237e-05 Jy ! Component: 200 - total flux cleaned = -0.000105767 Jy ! Total flux subtracted in 200 components = -0.000105767 Jy ! Clean residual min=-0.000876 max=0.000821 Jy/beam ! Clean residual mean=-0.000002 rms=0.000245 Jy/beam ! Combined flux in latest and established models = 0.0418682 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 77 components and 0.0418682 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.416 mas, bmaj=11.54 mas, bpa=1.506 degrees ! Estimated noise=7.79514 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000213817 Jy ! Component: 100 - total flux cleaned = -0.000328705 Jy ! Component: 150 - total flux cleaned = -0.00036871 Jy ! Component: 200 - total flux cleaned = -0.000351071 Jy ! Total flux subtracted in 200 components = -0.000351071 Jy ! Clean residual min=-0.001068 max=0.000991 Jy/beam ! Clean residual mean=-0.000001 rms=0.000272 Jy/beam ! Combined flux in latest and established models = 0.0415171 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 95 components and 0.0415171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.030156Jy sigma=0.052819 ! Fit after self-cal, rms=0.030130Jy sigma=0.052774 wmodel /g0/scr/pima/npcsc_uvs/J0009+7724_S_map.mod ! Writing 95 model components to file: /g0/scr/pima/npcsc_uvs/J0009+7724_S_map.mod wobs /g0/scr/pima/npcsc_uvs/J0009+7724_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J0009+7724_S_uvs.fits wwins /g0/scr/pima/npcsc_uvs/J0009+7724_S_map.win ! wwins: Wrote 2 windows to /g0/scr/pima/npcsc_uvs/J0009+7724_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000470414 Jy ! Component: 100 - total flux cleaned = -0.000731323 Jy ! Component: 150 - total flux cleaned = -0.000746309 Jy ! Component: 200 - total flux cleaned = -0.000760391 Jy ! Component: 250 - total flux cleaned = -0.000801751 Jy ! Component: 300 - total flux cleaned = -0.000801816 Jy ! Component: 350 - total flux cleaned = -0.000840442 Jy ! Component: 400 - total flux cleaned = -0.000915308 Jy ! Component: 450 - total flux cleaned = -0.00097625 Jy ! Component: 500 - total flux cleaned = -0.0010001 Jy ! Component: 550 - total flux cleaned = -0.000999876 Jy ! Component: 600 - total flux cleaned = -0.00101115 Jy ! Component: 650 - total flux cleaned = -0.00101109 Jy ! Component: 700 - total flux cleaned = -0.00102189 Jy ! Component: 750 - total flux cleaned = -0.00103263 Jy ! Component: 800 - total flux cleaned = -0.00104333 Jy ! Component: 850 - total flux cleaned = -0.00103281 Jy ! Component: 900 - total flux cleaned = -0.00105343 Jy ! Component: 950 - total flux cleaned = -0.00106351 Jy ! Component: 1000 - total flux cleaned = -0.00108354 Jy ! Component: 1050 - total flux cleaned = -0.00108346 Jy ! Component: 1100 - total flux cleaned = -0.00110312 Jy ! Component: 1150 - total flux cleaned = -0.00110297 Jy ! Component: 1200 - total flux cleaned = -0.00112216 Jy ! Component: 1250 - total flux cleaned = -0.00111269 Jy ! Component: 1300 - total flux cleaned = -0.00113159 Jy ! Component: 1350 - total flux cleaned = -0.00113153 Jy ! Component: 1400 - total flux cleaned = -0.00112248 Jy ! Component: 1450 - total flux cleaned = -0.00113162 Jy ! Component: 1500 - total flux cleaned = -0.00114061 Jy ! Component: 1550 - total flux cleaned = -0.00116725 Jy ! Component: 1600 - total flux cleaned = -0.00115842 Jy ! Component: 1650 - total flux cleaned = -0.00119333 Jy ! Component: 1700 - total flux cleaned = -0.00121055 Jy ! Component: 1750 - total flux cleaned = -0.00122777 Jy ! Component: 1800 - total flux cleaned = -0.00124482 Jy ! Component: 1850 - total flux cleaned = -0.00127862 Jy ! Component: 1900 - total flux cleaned = -0.00128698 Jy ! Component: 1950 - total flux cleaned = -0.00129525 Jy ! Component: 2000 - total flux cleaned = -0.00129526 Jy ! Component: 2050 - total flux cleaned = -0.00132812 Jy ! Component: 2100 - total flux cleaned = -0.00132813 Jy ! Component: 2150 - total flux cleaned = -0.00135248 Jy ! Component: 2200 - total flux cleaned = -0.00134444 Jy ! Component: 2250 - total flux cleaned = -0.00133647 Jy ! Component: 2300 - total flux cleaned = -0.00134444 Jy ! Component: 2350 - total flux cleaned = -0.00131258 Jy ! Component: 2400 - total flux cleaned = -0.00130467 Jy ! Component: 2450 - total flux cleaned = -0.00129675 Jy ! Component: 2500 - total flux cleaned = -0.00128891 Jy ! Component: 2550 - total flux cleaned = -0.00128889 Jy ! Component: 2600 - total flux cleaned = -0.00129679 Jy ! Component: 2650 - total flux cleaned = -0.00129679 Jy ! Component: 2700 - total flux cleaned = -0.00131249 Jy ! Component: 2750 - total flux cleaned = -0.0013047 Jy ! Component: 2800 - total flux cleaned = -0.00131252 Jy ! Component: 2850 - total flux cleaned = -0.00132818 Jy ! Component: 2900 - total flux cleaned = -0.00134387 Jy ! Component: 2950 - total flux cleaned = -0.00136736 Jy ! Component: 3000 - total flux cleaned = -0.00139087 Jy ! Component: 3050 - total flux cleaned = -0.00139871 Jy ! Component: 3100 - total flux cleaned = -0.00141432 Jy ! Component: 3150 - total flux cleaned = -0.00144565 Jy ! Component: 3200 - total flux cleaned = -0.0014691 Jy ! Component: 3250 - total flux cleaned = -0.00149261 Jy ! Component: 3300 - total flux cleaned = -0.00150828 Jy ! Component: 3350 - total flux cleaned = -0.00153978 Jy ! Component: 3400 - total flux cleaned = -0.00154764 Jy ! Component: 3450 - total flux cleaned = -0.00155555 Jy ! Component: 3500 - total flux cleaned = -0.00157135 Jy ! Component: 3550 - total flux cleaned = -0.00158719 Jy ! Component: 3600 - total flux cleaned = -0.00161896 Jy ! Component: 3650 - total flux cleaned = -0.00161897 Jy ! Component: 3700 - total flux cleaned = -0.00165095 Jy ! Component: 3750 - total flux cleaned = -0.00165098 Jy ! Component: 3800 - total flux cleaned = -0.00165901 Jy ! Component: 3850 - total flux cleaned = -0.00167517 Jy ! Component: 3900 - total flux cleaned = -0.00168331 Jy ! Component: 3950 - total flux cleaned = -0.00170789 Jy ! Component: 4000 - total flux cleaned = -0.00169973 Jy ! Component: 4050 - total flux cleaned = -0.00170796 Jy ! Total flux subtracted in 4096 components = -0.00171619 Jy ! Clean residual min=-0.000508 max=0.000481 Jy/beam ! Clean residual mean=-0.000003 rms=0.000137 Jy/beam ! Combined flux in latest and established models = 0.0398009 Jy keep ! Adding 208 model components to the UV plane model. ! The established model now contains 303 components and 0.0398009 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsc_uvs/J0009+7724_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.416 x 11.54 at 1.506 degrees (North through East) ! Clean map min=-0.0010495 max=0.031867 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J0009+7724_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0318672 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000126591 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.19173 1.19173 2.38346 4.76692 9.53385 19.0677 38.1354 76.2708 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.031 quit ! Quitting program ! Log file /g0/scr/pima/npcsc_uvs/J0009+7724_S_uvs.log closed on Sun Oct 6 14:25:37 2013