! Started logfile: /g0/scr/pima/npcsb_uvs/J2325+7917_S_uvs.log on Sat Oct 5 19:01:38 2013 obs /g0/scr/pima/npcsb_uvs/J2325+7917_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J2325+7917_S_uva.fits ! AN table 1: 46 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.896618 visibilities/baseline/integration-bin. ! Found source: J2325+7917 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 7424 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J2325+7917_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.101506Jy sigma=3.792042 ! Fit after self-cal, rms=0.701316Jy sigma=1.499843 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.404 mas, bmaj=10.16 mas, bpa=0.123 degrees ! Estimated noise=7.71598 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.339112 Jy ! Component: 100 - total flux cleaned = 0.480169 Jy ! Total flux subtracted in 100 components = 0.480169 Jy ! Clean residual min=-0.047798 max=0.072581 Jy/beam ! Clean residual mean=0.000019 rms=0.017985 Jy/beam ! Combined flux in latest and established models = 0.480169 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.480169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180360Jy sigma=0.816734 ! Fit after self-cal, rms=0.180780Jy sigma=0.816096 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.619 mas, bmaj=11.22 mas, bpa=-0.002229 degrees ! Estimated noise=3.06328 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.10456 Jy ! Component: 100 - total flux cleaned = 0.154029 Jy ! Component: 150 - total flux cleaned = 0.181419 Jy ! Component: 200 - total flux cleaned = 0.197262 Jy ! Total flux subtracted in 200 components = 0.197262 Jy ! Clean residual min=-0.047756 max=0.079378 Jy/beam ! Clean residual mean=0.000329 rms=0.015109 Jy/beam ! Combined flux in latest and established models = 0.67743 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 55 components and 0.67743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155474Jy sigma=0.578452 ! Fit after self-cal, rms=0.155630Jy sigma=0.578036 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.02 HN 0.94 KP 1.02 ! LA 0.97 MK 0.84 NL 1.27 OV 1.02 ! PT 0.99 SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.07 HN 0.95 KP 1.03 ! LA 0.94 MK 0.92 NL 1.24 OV 1.03 ! PT 0.93 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.16 HN 1.03 KP 1.08 ! LA 0.76 MK 1.05 NL 1.34 OV 1.07 ! PT 1.02 SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.18 HN 0.87 KP 1.01 ! LA 0.67 MK 0.97 NL 1.27 OV 0.95 ! PT 0.88 SC 1.28 ! ! ! Fit before self-cal, rms=0.155630Jy sigma=0.578036 ! Fit after self-cal, rms=0.138106Jy sigma=0.427369 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.637 mas, bmaj=11.3 mas, bpa=0.4774 degrees ! Estimated noise=3.0208 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-18, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0457799 Jy ! Component: 100 - total flux cleaned = 0.0451017 Jy ! Component: 150 - total flux cleaned = 0.0428785 Jy ! Component: 200 - total flux cleaned = 0.0398771 Jy ! Total flux subtracted in 200 components = 0.0398771 Jy ! Clean residual min=-0.018319 max=0.028356 Jy/beam ! Clean residual mean=-0.000065 rms=0.007044 Jy/beam ! Combined flux in latest and established models = 0.717307 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 89 components and 0.717308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119280Jy sigma=0.359933 ! Fit after self-cal, rms=0.114816Jy sigma=0.346632 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114816Jy sigma=0.346632 ! Fit after self-cal, rms=0.112198Jy sigma=0.338182 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.681 mas, bmaj=11.3 mas, bpa=0.2952 degrees ! Estimated noise=2.96144 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115627 Jy ! Component: 100 - total flux cleaned = 0.0121053 Jy ! Component: 150 - total flux cleaned = 0.0116612 Jy ! Component: 200 - total flux cleaned = 0.0112909 Jy ! Total flux subtracted in 200 components = 0.0112909 Jy ! Clean residual min=-0.013464 max=0.017924 Jy/beam ! Clean residual mean=-0.000038 rms=0.004509 Jy/beam ! Combined flux in latest and established models = 0.728598 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 126 components and 0.728598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106923Jy sigma=0.316701 ! Fit after self-cal, rms=0.105243Jy sigma=0.311001 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00845838 Jy ! Component: 100 - total flux cleaned = 0.00946988 Jy ! Component: 150 - total flux cleaned = 0.00972337 Jy ! Component: 200 - total flux cleaned = 0.00949743 Jy ! Total flux subtracted in 200 components = 0.00949743 Jy ! Clean residual min=-0.012195 max=0.013451 Jy/beam ! Clean residual mean=-0.000052 rms=0.003602 Jy/beam ! Combined flux in latest and established models = 0.738096 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 148 components and 0.738096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103609Jy sigma=0.303975 ! Fit after self-cal, rms=0.103057Jy sigma=0.302478 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103057Jy sigma=0.302478 ! Fit after self-cal, rms=0.102148Jy sigma=0.298142 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.709 mas, bmaj=11.3 mas, bpa=0.1732 degrees ! Estimated noise=2.92527 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000510158 Jy ! Component: 100 - total flux cleaned = -0.000542932 Jy ! Component: 150 - total flux cleaned = -0.00116906 Jy ! Component: 200 - total flux cleaned = -0.00099378 Jy ! Total flux subtracted in 200 components = -0.00099378 Jy ! Clean residual min=-0.010100 max=0.010639 Jy/beam ! Clean residual mean=-0.000026 rms=0.002655 Jy/beam ! Combined flux in latest and established models = 0.737102 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 174 components and 0.737102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100841Jy sigma=0.294309 ! Fit after self-cal, rms=0.100497Jy sigma=0.293268 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00324453 Jy ! Component: 100 - total flux cleaned = 0.00411973 Jy ! Component: 150 - total flux cleaned = 0.00471909 Jy ! Component: 200 - total flux cleaned = 0.00459175 Jy ! Total flux subtracted in 200 components = 0.00459175 Jy ! Clean residual min=-0.009077 max=0.009072 Jy/beam ! Clean residual mean=-0.000031 rms=0.002341 Jy/beam ! Combined flux in latest and established models = 0.741694 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 194 components and 0.741694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100029Jy sigma=0.291457 ! Fit after self-cal, rms=0.099892Jy sigma=0.291107 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099892Jy sigma=0.291107 ! Fit after self-cal, rms=0.099192Jy sigma=0.289313 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.94 mas, bmaj=13.5 mas, bpa=12.62 degrees ! Estimated noise=2.52403 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000196096 Jy ! Component: 100 - total flux cleaned = 0.000381786 Jy ! Component: 150 - total flux cleaned = -5.78833e-05 Jy ! Component: 200 - total flux cleaned = -0.00030798 Jy ! Total flux subtracted in 200 components = -0.00030798 Jy ! Clean residual min=-0.007613 max=0.008744 Jy/beam ! Clean residual mean=-0.000031 rms=0.002438 Jy/beam ! Combined flux in latest and established models = 0.741386 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 212 components and 0.741386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098170Jy sigma=0.288319 ! Fit after self-cal, rms=0.098077Jy sigma=0.287977 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00270495 Jy ! Component: 100 - total flux cleaned = 0.00271912 Jy ! Component: 150 - total flux cleaned = 0.00245161 Jy ! Component: 200 - total flux cleaned = 0.00212878 Jy ! Total flux subtracted in 200 components = 0.00212878 Jy ! Clean residual min=-0.007279 max=0.007651 Jy/beam ! Clean residual mean=-0.000033 rms=0.002209 Jy/beam ! Combined flux in latest and established models = 0.743515 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 227 components and 0.743515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097983Jy sigma=0.287499 ! Fit after self-cal, rms=0.097947Jy sigma=0.287392 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.708 mas, bmaj=11.3 mas, bpa=0.1474 degrees ! Estimated noise=2.8897 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.708 x 11.3 at 0.1474 degrees (North through East) ! Clean map min=-0.01721 max=0.43925 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.455 mas, bmaj=10.14 mas, bpa=0.2238 degrees ! Estimated noise=7.33392 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.318531 Jy ! Component: 100 - total flux cleaned = 0.450653 Jy ! Component: 150 - total flux cleaned = 0.525516 Jy ! Component: 200 - total flux cleaned = 0.574487 Jy ! Total flux subtracted in 200 components = 0.574487 Jy ! Clean residual min=-0.020901 max=0.036471 Jy/beam ! Clean residual mean=0.000002 rms=0.008114 Jy/beam ! Combined flux in latest and established models = 0.574487 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.574487 Jy ! Inverting map and beam ! Estimated beam: bmin=4.708 mas, bmaj=11.3 mas, bpa=0.1474 degrees ! Estimated noise=2.8897 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (21, -50.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0551008 Jy ! Component: 100 - total flux cleaned = 0.0895477 Jy ! Component: 150 - total flux cleaned = 0.113162 Jy ! Component: 200 - total flux cleaned = 0.130111 Jy ! Total flux subtracted in 200 components = 0.130111 Jy ! Clean residual min=-0.011797 max=0.014058 Jy/beam ! Clean residual mean=0.000025 rms=0.003955 Jy/beam ! Combined flux in latest and established models = 0.704597 Jy ! Adding 85 model components to the UV plane model. ! The established model now contains 120 components and 0.704598 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.94 mas, bmaj=13.5 mas, bpa=12.62 degrees ! Estimated noise=2.52403 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0170831 Jy ! Component: 100 - total flux cleaned = 0.0229029 Jy ! Component: 150 - total flux cleaned = 0.0266703 Jy ! Component: 200 - total flux cleaned = 0.0293974 Jy ! Total flux subtracted in 200 components = 0.0293974 Jy ! Clean residual min=-0.009174 max=0.010641 Jy/beam ! Clean residual mean=-0.000019 rms=0.003142 Jy/beam ! Combined flux in latest and established models = 0.733995 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129182 Jy ! Component: 100 - total flux cleaned = 0.00198964 Jy ! Component: 150 - total flux cleaned = 0.00282456 Jy ! Component: 200 - total flux cleaned = 0.00340056 Jy ! Total flux subtracted in 200 components = 0.00340056 Jy ! Clean residual min=-0.007479 max=0.009290 Jy/beam ! Clean residual mean=-0.000018 rms=0.002659 Jy/beam ! Combined flux in latest and established models = 0.737396 Jy ! Adding 88 model components to the UV plane model. ! The established model now contains 197 components and 0.737396 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.708 mas, bmaj=11.3 mas, bpa=0.1474 degrees ! Estimated noise=2.8897 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000504989 Jy ! Component: 100 - total flux cleaned = 0.00115442 Jy ! Component: 150 - total flux cleaned = 0.00173142 Jy ! Component: 200 - total flux cleaned = 0.00207946 Jy ! Total flux subtracted in 200 components = 0.00207946 Jy ! Clean residual min=-0.006812 max=0.007450 Jy/beam ! Clean residual mean=-0.000018 rms=0.001894 Jy/beam ! Combined flux in latest and established models = 0.739475 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 222 components and 0.739475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097409Jy sigma=0.289598 ! Fit after self-cal, rms=0.097325Jy sigma=0.288899 wmodel /g0/scr/pima/npcsb_uvs/J2325+7917_S_map.mod ! Writing 222 model components to file: /g0/scr/pima/npcsb_uvs/J2325+7917_S_map.mod wobs /g0/scr/pima/npcsb_uvs/J2325+7917_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J2325+7917_S_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J2325+7917_S_map.win ! wwins: Wrote 3 windows to /g0/scr/pima/npcsb_uvs/J2325+7917_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000204228 Jy ! Component: 100 - total flux cleaned = 0.000960926 Jy ! Component: 150 - total flux cleaned = 0.00206386 Jy ! Component: 200 - total flux cleaned = 0.00318445 Jy ! Component: 250 - total flux cleaned = 0.00441664 Jy ! Component: 300 - total flux cleaned = 0.00541283 Jy ! Component: 350 - total flux cleaned = 0.00620184 Jy ! Component: 400 - total flux cleaned = 0.00703365 Jy ! Component: 450 - total flux cleaned = 0.00790407 Jy ! Component: 500 - total flux cleaned = 0.00860292 Jy ! Component: 550 - total flux cleaned = 0.00914281 Jy ! Component: 600 - total flux cleaned = 0.00960133 Jy ! Component: 650 - total flux cleaned = 0.00998285 Jy ! Component: 700 - total flux cleaned = 0.0103528 Jy ! Component: 750 - total flux cleaned = 0.0105921 Jy ! Component: 800 - total flux cleaned = 0.0109409 Jy ! Component: 850 - total flux cleaned = 0.0112807 Jy ! Component: 900 - total flux cleaned = 0.0115026 Jy ! Component: 950 - total flux cleaned = 0.0118259 Jy ! Component: 1000 - total flux cleaned = 0.0121925 Jy ! Component: 1050 - total flux cleaned = 0.0123467 Jy ! Component: 1100 - total flux cleaned = 0.0125457 Jy ! Component: 1150 - total flux cleaned = 0.0126922 Jy ! Component: 1200 - total flux cleaned = 0.0128844 Jy ! Component: 1250 - total flux cleaned = 0.013072 Jy ! Component: 1300 - total flux cleaned = 0.0131181 Jy ! Component: 1350 - total flux cleaned = 0.0132533 Jy ! Component: 1400 - total flux cleaned = 0.013386 Jy ! Component: 1450 - total flux cleaned = 0.0133854 Jy ! Component: 1500 - total flux cleaned = 0.0135557 Jy ! Component: 1550 - total flux cleaned = 0.0135551 Jy ! Component: 1600 - total flux cleaned = 0.0136781 Jy ! Component: 1650 - total flux cleaned = 0.0137173 Jy ! Component: 1700 - total flux cleaned = 0.0137169 Jy ! Component: 1750 - total flux cleaned = 0.0137167 Jy ! Component: 1800 - total flux cleaned = 0.0137941 Jy ! Component: 1850 - total flux cleaned = 0.0138327 Jy ! Component: 1900 - total flux cleaned = 0.013907 Jy ! Component: 1950 - total flux cleaned = 0.0139068 Jy ! Component: 2000 - total flux cleaned = 0.013907 Jy ! Component: 2050 - total flux cleaned = 0.0139077 Jy ! Component: 2100 - total flux cleaned = 0.0138722 Jy ! Component: 2150 - total flux cleaned = 0.013768 Jy ! Component: 2200 - total flux cleaned = 0.0137336 Jy ! Component: 2250 - total flux cleaned = 0.0136999 Jy ! Component: 2300 - total flux cleaned = 0.013633 Jy ! Component: 2350 - total flux cleaned = 0.0135998 Jy ! Component: 2400 - total flux cleaned = 0.0136655 Jy ! Component: 2450 - total flux cleaned = 0.0136333 Jy ! Component: 2500 - total flux cleaned = 0.0136333 Jy ! Component: 2550 - total flux cleaned = 0.0136969 Jy ! Component: 2600 - total flux cleaned = 0.0137284 Jy ! Component: 2650 - total flux cleaned = 0.0137287 Jy ! Component: 2700 - total flux cleaned = 0.0136669 Jy ! Component: 2750 - total flux cleaned = 0.0137281 Jy ! Component: 2800 - total flux cleaned = 0.0137582 Jy ! Component: 2850 - total flux cleaned = 0.0137583 Jy ! Component: 2900 - total flux cleaned = 0.0136389 Jy ! Component: 2950 - total flux cleaned = 0.0137276 Jy ! Component: 3000 - total flux cleaned = 0.01361 Jy ! Component: 3050 - total flux cleaned = 0.0136103 Jy ! Component: 3100 - total flux cleaned = 0.0134659 Jy ! Component: 3150 - total flux cleaned = 0.0134373 Jy ! Component: 3200 - total flux cleaned = 0.0134376 Jy ! Component: 3250 - total flux cleaned = 0.0133531 Jy ! Component: 3300 - total flux cleaned = 0.0134093 Jy ! Component: 3350 - total flux cleaned = 0.0133815 Jy ! Component: 3400 - total flux cleaned = 0.0133816 Jy ! Component: 3450 - total flux cleaned = 0.0134366 Jy ! Component: 3500 - total flux cleaned = 0.0134366 Jy ! Component: 3550 - total flux cleaned = 0.0134367 Jy ! Component: 3600 - total flux cleaned = 0.0134096 Jy ! Component: 3650 - total flux cleaned = 0.0134634 Jy ! Component: 3700 - total flux cleaned = 0.0134367 Jy ! Component: 3750 - total flux cleaned = 0.0134368 Jy ! Component: 3800 - total flux cleaned = 0.0134366 Jy ! Component: 3850 - total flux cleaned = 0.013463 Jy ! Component: 3900 - total flux cleaned = 0.0134894 Jy ! Component: 3950 - total flux cleaned = 0.0135681 Jy ! Component: 4000 - total flux cleaned = 0.013568 Jy ! Component: 4050 - total flux cleaned = 0.0135941 Jy ! Total flux subtracted in 4096 components = 0.0135681 Jy ! Clean residual min=-0.001693 max=0.001693 Jy/beam ! Clean residual mean=0.000000 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.753043 Jy keep ! Adding 309 model components to the UV plane model. ! The established model now contains 531 components and 0.753043 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J2325+7917_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.708 x 11.3 at 0.1474 degrees (North through East) ! Clean map min=-0.0089564 max=0.43493 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J2325+7917_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.434926 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000457199 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.315363 0.315363 0.630726 1.26145 2.52291 5.04581 10.0916 20.1832 40.3665 80.733 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.434 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J2325+7917_S_uvs.log closed on Sat Oct 5 19:01:42 2013