! Started logfile: /g0/scr/pima/npcsb_uvs/J2310+8857_X_uvs.log on Sat Oct 5 18:55:25 2013 obs /g0/scr/pima/npcsb_uvs/J2310+8857_X_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J2310+8857_X_uva.fits ! AN table 1: 46 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.736715 visibilities/baseline/integration-bin. ! Found source: J2310+8857 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 4880 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J2310+8857_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.045748Jy sigma=1.204735 ! Fit after self-cal, rms=0.986273Jy sigma=1.144318 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.121 mas, bmaj=3.514 mas, bpa=-8.456 degrees ! Estimated noise=23.9259 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0692532 Jy ! Component: 100 - total flux cleaned = 0.0892955 Jy ! Total flux subtracted in 100 components = 0.0892955 Jy ! Clean residual min=-0.017838 max=0.017330 Jy/beam ! Clean residual mean=-0.000003 rms=0.007172 Jy/beam ! Combined flux in latest and established models = 0.0892955 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0892955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.312169Jy sigma=0.900800 ! Fit after self-cal, rms=0.311656Jy sigma=0.900691 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.484 mas, bmaj=3.819 mas, bpa=-6.839 degrees ! Estimated noise=13.7748 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124704 Jy ! Component: 100 - total flux cleaned = 0.0104069 Jy ! Component: 150 - total flux cleaned = 0.00817334 Jy ! Component: 200 - total flux cleaned = 0.00638012 Jy ! Total flux subtracted in 200 components = 0.00638012 Jy ! Clean residual min=-0.025695 max=0.024770 Jy/beam ! Clean residual mean=0.000002 rms=0.011976 Jy/beam ! Combined flux in latest and established models = 0.0956757 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 20 components and 0.0956757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.313092Jy sigma=0.897851 ! Fit after self-cal, rms=0.312923Jy sigma=0.897807 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.67 FD 0.89 HN 0.84 KP 0.96 ! LA 0.84 MK 1.00* NL 0.94 OV 1.00 ! PT 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.54 FD 0.89 HN 0.83 KP 0.87 ! LA 0.89 MK 1.00* NL 0.94 OV 1.05 ! PT 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.59 FD 0.87 HN 0.71 KP 0.76 ! LA 0.85 MK 1.00* NL 0.96 OV 1.04 ! PT 0.92 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.19 FD 5.35 HN 2.13 KP 4.65 ! LA 0.15 MK 1.00* NL 5.52 OV 6.01 ! PT 6.83 ! ! ! Fit before self-cal, rms=0.312923Jy sigma=0.897807 ! Fit after self-cal, rms=1.096914Jy sigma=0.769034 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.634 mas, bmaj=2.99 mas, bpa=0.4918 degrees ! Estimated noise=10.5466 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000422827 Jy ! Component: 100 - total flux cleaned = 0.00385508 Jy ! Component: 150 - total flux cleaned = 0.00639171 Jy ! Component: 200 - total flux cleaned = 0.00760697 Jy ! Total flux subtracted in 200 components = 0.00760697 Jy ! Clean residual min=-0.017706 max=0.022208 Jy/beam ! Clean residual mean=-0.000010 rms=0.007222 Jy/beam ! Combined flux in latest and established models = 0.103283 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 40 components and 0.103283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.098027Jy sigma=0.802133 ! Fit after self-cal, rms=1.108257Jy sigma=0.801498 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.108257Jy sigma=0.801498 ! Fit after self-cal, rms=1.593992Jy sigma=0.767041 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.748 mas, bmaj=2.804 mas, bpa=11.42 degrees ! Estimated noise=7.90296 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00883118 Jy ! Component: 100 - total flux cleaned = -0.00625155 Jy ! Component: 150 - total flux cleaned = -0.00518155 Jy ! Component: 200 - total flux cleaned = -0.00448339 Jy ! Total flux subtracted in 200 components = -0.00448339 Jy ! Clean residual min=-0.012713 max=0.013674 Jy/beam ! Clean residual mean=-0.000004 rms=0.004603 Jy/beam ! Combined flux in latest and established models = 0.0987992 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 43 components and 0.0987992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.594972Jy sigma=0.807097 ! Fit after self-cal, rms=1.595771Jy sigma=0.807075 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00040039 Jy ! Component: 100 - total flux cleaned = 0.000254683 Jy ! Component: 150 - total flux cleaned = -4.79061e-06 Jy ! Component: 200 - total flux cleaned = -0.000354711 Jy ! Total flux subtracted in 200 components = -0.000354711 Jy ! Clean residual min=-0.012236 max=0.012863 Jy/beam ! Clean residual mean=-0.000004 rms=0.004238 Jy/beam ! Combined flux in latest and established models = 0.0984445 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 53 components and 0.0984445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.595667Jy sigma=0.811415 ! Fit after self-cal, rms=1.595743Jy sigma=0.811395 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.595743Jy sigma=0.811395 ! Fit after self-cal, rms=2.825944Jy sigma=0.764969 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.803 mas, bmaj=2.849 mas, bpa=27.82 degrees ! Estimated noise=4.90416 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00890841 Jy ! Component: 100 - total flux cleaned = -0.00870414 Jy ! Component: 150 - total flux cleaned = -0.00837729 Jy ! Component: 200 - total flux cleaned = -0.00821779 Jy ! Total flux subtracted in 200 components = -0.00821779 Jy ! Clean residual min=-0.007614 max=0.008215 Jy/beam ! Clean residual mean=-0.000002 rms=0.002698 Jy/beam ! Combined flux in latest and established models = 0.0902267 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 58 components and 0.0902267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.826759Jy sigma=0.807726 ! Fit after self-cal, rms=2.827648Jy sigma=0.807689 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000310949 Jy ! Component: 100 - total flux cleaned = -0.000584178 Jy ! Component: 150 - total flux cleaned = -0.000822757 Jy ! Component: 200 - total flux cleaned = -0.00101207 Jy ! Total flux subtracted in 200 components = -0.00101207 Jy ! Clean residual min=-0.007459 max=0.007654 Jy/beam ! Clean residual mean=-0.000002 rms=0.002552 Jy/beam ! Combined flux in latest and established models = 0.0892146 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 58 components and 0.0892146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.827600Jy sigma=0.810433 ! Fit after self-cal, rms=2.827880Jy sigma=0.810406 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.827880Jy sigma=0.810406 ! Fit after self-cal, rms=5.205976Jy sigma=0.760787 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.895 mas, bmaj=5.145 mas, bpa=51.72 degrees ! Estimated noise=2.95005 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00694703 Jy ! Component: 100 - total flux cleaned = -0.00855116 Jy ! Component: 150 - total flux cleaned = -0.00913114 Jy ! Component: 200 - total flux cleaned = -0.00943688 Jy ! Total flux subtracted in 200 components = -0.00943688 Jy ! Clean residual min=-0.004121 max=0.004243 Jy/beam ! Clean residual mean=-0.000001 rms=0.001432 Jy/beam ! Combined flux in latest and established models = 0.0797778 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 65 components and 0.0797778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.206532Jy sigma=0.805346 ! Fit after self-cal, rms=5.206944Jy sigma=0.805312 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000185431 Jy ! Component: 100 - total flux cleaned = -0.000296941 Jy ! Component: 150 - total flux cleaned = -0.000493928 Jy ! Component: 200 - total flux cleaned = -0.00066266 Jy ! Total flux subtracted in 200 components = -0.00066266 Jy ! Clean residual min=-0.004006 max=0.004129 Jy/beam ! Clean residual mean=-0.000000 rms=0.001348 Jy/beam ! Combined flux in latest and established models = 0.0791151 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 68 components and 0.0791151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.206932Jy sigma=0.808859 ! Fit after self-cal, rms=5.207037Jy sigma=0.808809 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.788 mas, bmaj=3.251 mas, bpa=41.33 degrees ! Estimated noise=2.72832 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.788 x 3.251 at 41.33 degrees (North through East) ! Clean map min=-0.0039545 max=0.040687 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.632 mas, bmaj=2.616 mas, bpa=27.92 degrees ! Estimated noise=4.77725 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137195 Jy ! Component: 100 - total flux cleaned = 0.0229297 Jy ! Component: 150 - total flux cleaned = 0.0301231 Jy ! Component: 200 - total flux cleaned = 0.0358323 Jy ! Total flux subtracted in 200 components = 0.0358323 Jy ! Clean residual min=-0.005802 max=0.005949 Jy/beam ! Clean residual mean=-0.000000 rms=0.002070 Jy/beam ! Combined flux in latest and established models = 0.0358323 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0358323 Jy ! Inverting map and beam ! Estimated beam: bmin=1.788 mas, bmaj=3.251 mas, bpa=41.33 degrees ! Estimated noise=2.72832 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00704921 Jy ! Component: 100 - total flux cleaned = 0.012607 Jy ! Component: 150 - total flux cleaned = 0.0171694 Jy ! Component: 200 - total flux cleaned = 0.0209754 Jy ! Total flux subtracted in 200 components = 0.0209754 Jy ! Clean residual min=-0.004543 max=0.004680 Jy/beam ! Clean residual mean=0.000001 rms=0.001454 Jy/beam ! Combined flux in latest and established models = 0.0568077 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 34 components and 0.0568077 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.895 mas, bmaj=5.145 mas, bpa=51.72 degrees ! Estimated noise=2.95005 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00425072 Jy ! Component: 100 - total flux cleaned = 0.00751426 Jy ! Component: 150 - total flux cleaned = 0.0100893 Jy ! Component: 200 - total flux cleaned = 0.0121401 Jy ! Total flux subtracted in 200 components = 0.0121401 Jy ! Clean residual min=-0.004354 max=0.004167 Jy/beam ! Clean residual mean=0.000001 rms=0.001340 Jy/beam ! Combined flux in latest and established models = 0.0689478 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140061 Jy ! Component: 100 - total flux cleaned = 0.00201776 Jy ! Component: 150 - total flux cleaned = 0.0025644 Jy ! Component: 200 - total flux cleaned = 0.00304856 Jy ! Total flux subtracted in 200 components = 0.00304856 Jy ! Clean residual min=-0.004155 max=0.004059 Jy/beam ! Clean residual mean=0.000001 rms=0.001281 Jy/beam ! Combined flux in latest and established models = 0.0719964 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 54 components and 0.0719964 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.788 mas, bmaj=3.251 mas, bpa=41.33 degrees ! Estimated noise=2.72832 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000223839 Jy ! Component: 100 - total flux cleaned = 0.000592908 Jy ! Component: 150 - total flux cleaned = 0.000920519 Jy ! Component: 200 - total flux cleaned = 0.00124831 Jy ! Total flux subtracted in 200 components = 0.00124831 Jy ! Clean residual min=-0.003869 max=0.003970 Jy/beam ! Clean residual mean=0.000000 rms=0.001258 Jy/beam ! Combined flux in latest and established models = 0.0732447 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 61 components and 0.0732447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.207168Jy sigma=0.804168 ! Fit after self-cal, rms=5.207228Jy sigma=0.804122 wmodel /g0/scr/pima/npcsb_uvs/J2310+8857_X_map.mod ! Writing 61 model components to file: /g0/scr/pima/npcsb_uvs/J2310+8857_X_map.mod wobs /g0/scr/pima/npcsb_uvs/J2310+8857_X_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J2310+8857_X_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J2310+8857_X_map.win ! wwins: Wrote 1 windows to /g0/scr/pima/npcsb_uvs/J2310+8857_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00051941 Jy ! Component: 100 - total flux cleaned = -0.00104239 Jy ! Component: 150 - total flux cleaned = -0.000800819 Jy ! Component: 200 - total flux cleaned = 0.000353159 Jy ! Component: 250 - total flux cleaned = 0.000534287 Jy ! Component: 300 - total flux cleaned = 0.000896015 Jy ! Component: 350 - total flux cleaned = 0.000652634 Jy ! Component: 400 - total flux cleaned = -2.71844e-05 Jy ! Component: 450 - total flux cleaned = -0.000595162 Jy ! Component: 500 - total flux cleaned = -0.00118087 Jy ! Component: 550 - total flux cleaned = -0.00138196 Jy ! Component: 600 - total flux cleaned = -0.00179443 Jy ! Component: 650 - total flux cleaned = -0.00208707 Jy ! Component: 700 - total flux cleaned = -0.00283642 Jy ! Component: 750 - total flux cleaned = -0.00315297 Jy ! Component: 800 - total flux cleaned = -0.00347542 Jy ! Component: 850 - total flux cleaned = -0.00373126 Jy ! Component: 900 - total flux cleaned = -0.00408323 Jy ! Component: 950 - total flux cleaned = -0.00436456 Jy ! Component: 1000 - total flux cleaned = -0.00456372 Jy ! Component: 1050 - total flux cleaned = -0.00414797 Jy ! Component: 1100 - total flux cleaned = -0.00382258 Jy ! Component: 1150 - total flux cleaned = -0.0039384 Jy ! Component: 1200 - total flux cleaned = -0.00370366 Jy ! Component: 1250 - total flux cleaned = -0.00498596 Jy ! Component: 1300 - total flux cleaned = -0.00566587 Jy ! Component: 1350 - total flux cleaned = -0.00637558 Jy ! Component: 1400 - total flux cleaned = -0.00728354 Jy ! Component: 1450 - total flux cleaned = -0.00855514 Jy ! Component: 1500 - total flux cleaned = -0.0100786 Jy ! Component: 1550 - total flux cleaned = -0.0111664 Jy ! Component: 1600 - total flux cleaned = -0.0124922 Jy ! Component: 1650 - total flux cleaned = -0.0141056 Jy ! Component: 1700 - total flux cleaned = -0.0158296 Jy ! Component: 1750 - total flux cleaned = -0.0174156 Jy ! Component: 1800 - total flux cleaned = -0.0193509 Jy ! Component: 1850 - total flux cleaned = -0.0203727 Jy ! Component: 1900 - total flux cleaned = -0.0219806 Jy ! Component: 1950 - total flux cleaned = -0.0245636 Jy ! Component: 2000 - total flux cleaned = -0.0260906 Jy ! Component: 2050 - total flux cleaned = -0.0270631 Jy ! Component: 2100 - total flux cleaned = -0.0287778 Jy ! Component: 2150 - total flux cleaned = -0.0298876 Jy ! Component: 2200 - total flux cleaned = -0.0314281 Jy ! Component: 2250 - total flux cleaned = -0.0330788 Jy ! Component: 2300 - total flux cleaned = -0.0348259 Jy ! Component: 2350 - total flux cleaned = -0.0357432 Jy ! Component: 2400 - total flux cleaned = -0.038201 Jy ! Component: 2450 - total flux cleaned = -0.0413267 Jy ! Component: 2500 - total flux cleaned = -0.0408174 Jy ! Component: 2550 - total flux cleaned = -0.0431768 Jy ! Component: 2600 - total flux cleaned = -0.0457059 Jy ! Component: 2650 - total flux cleaned = -0.0484042 Jy ! Component: 2700 - total flux cleaned = -0.0505924 Jy ! Component: 2750 - total flux cleaned = -0.0513929 Jy ! Component: 2800 - total flux cleaned = -0.0521211 Jy ! Component: 2850 - total flux cleaned = -0.0545789 Jy ! Component: 2900 - total flux cleaned = -0.0589681 Jy ! Component: 2950 - total flux cleaned = -0.0617936 Jy ! Component: 3000 - total flux cleaned = -0.0627667 Jy ! Component: 3050 - total flux cleaned = -0.0691821 Jy ! Component: 3100 - total flux cleaned = -0.0691511 Jy ! Component: 3150 - total flux cleaned = -0.0763937 Jy ! Component: 3200 - total flux cleaned = -0.079031 Jy ! Component: 3250 - total flux cleaned = -0.083012 Jy ! Component: 3300 - total flux cleaned = -0.0873024 Jy ! Component: 3350 - total flux cleaned = -0.0949628 Jy ! Component: 3400 - total flux cleaned = -0.0947899 Jy ! Component: 3450 - total flux cleaned = -0.103477 Jy ! Component: 3500 - total flux cleaned = -0.110825 Jy ! Component: 3550 - total flux cleaned = -0.114792 Jy ! Component: 3600 - total flux cleaned = -0.120909 Jy ! Component: 3650 - total flux cleaned = -0.129729 Jy ! Component: 3700 - total flux cleaned = -0.136696 Jy ! Component: 3750 - total flux cleaned = -0.144221 Jy ! Component: 3800 - total flux cleaned = -0.152138 Jy ! Component: 3850 - total flux cleaned = -0.160426 Jy ! Component: 3900 - total flux cleaned = -0.163512 Jy ! Component: 3950 - total flux cleaned = -0.179276 Jy ! Component: 4000 - total flux cleaned = -0.185758 Jy ! Component: 4050 - total flux cleaned = -0.199905 Jy ! Total flux subtracted in 4096 components = -0.199544 Jy ! Clean residual min=-0.230974 max=0.224078 Jy/beam ! Clean residual mean=-0.000002 rms=0.069452 Jy/beam ! Combined flux in latest and established models = -0.126299 Jy keep ! Adding 156 model components to the UV plane model. ! The established model now contains 217 components and -0.126299 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J2310+8857_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.788 x 3.251 at 41.33 degrees (North through East) ! Clean map min=-0.22323 max=0.23657 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J2310+8857_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.236566 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0849945 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -100 100 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.2549 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.236 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J2310+8857_X_uvs.log closed on Sat Oct 5 18:55:29 2013