! Started logfile: /g0/scr/pima/npcsb_uvs/J2310+8857_S_uvs.log on Sat Oct  5 19:01:33 2013
obs /g0/scr/pima/npcsb_uvs/J2310+8857_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J2310+8857_S_uva.fits
! AN table 1: 46 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.956522 visibilities/baseline/integration-bin.
! Found source: J2310+8857
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 6336 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J2310+8857_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.021239Jy  sigma=1.185563
! Fit after  self-cal, rms=0.871688Jy  sigma=0.921357
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.563 mas, bmaj=9.718 mas, bpa=13.52 degrees
! Estimated noise=19.7229 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.12304 Jy
! Component: 100  -  total flux cleaned = 0.158255 Jy
! Total flux subtracted in 100 components = 0.158255 Jy
! Clean residual min=-0.025074 max=0.024696 Jy/beam
! Clean residual mean=-0.000029 rms=0.006393 Jy/beam
! Combined flux in latest and established models = 0.158255 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.158255 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.164364Jy  sigma=0.231239
! Fit after  self-cal, rms=0.163903Jy  sigma=0.230841
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.809 mas, bmaj=11.04 mas, bpa=13.26 degrees
! Estimated noise=8.6025 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0262738 Jy
! Component: 100  -  total flux cleaned = 0.0253531 Jy
! Component: 150  -  total flux cleaned = 0.0247179 Jy
! Component: 200  -  total flux cleaned = 0.0241801 Jy
! Total flux subtracted in 200 components = 0.0241801 Jy
! Clean residual min=-0.025448 max=0.024523 Jy/beam
! Clean residual mean=-0.000042 rms=0.006057 Jy/beam
! Combined flux in latest and established models = 0.182435 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 24 components and 0.182435 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.158179Jy  sigma=0.210784
! Fit after  self-cal, rms=0.157767Jy  sigma=0.210513
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.27     FD        0.92     HN        0.82     KP        0.91     
!   LA        1.01     MK        0.81     NL        1.25     OV        1.07     
!   PT        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.42     FD        0.98     HN        0.94     KP        0.89     
!   LA        0.92     MK        0.83     NL        1.30     OV        1.04     
!   PT        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.32     FD        1.04     HN        0.81     KP        1.03     
!   LA        0.81     MK        0.95     NL        1.29     OV        0.98     
!   PT        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.65     FD        1.07     HN        0.73     KP        0.83     
!   LA        0.66     MK        1.03     NL        1.26     OV        0.96     
!   PT        0.96     
! 
! 
! Fit before self-cal, rms=0.157767Jy  sigma=0.210513
! Fit after  self-cal, rms=0.108685Jy  sigma=0.130444
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.732 mas, bmaj=10.69 mas, bpa=12.96 degrees
! Estimated noise=7.38063 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0158807 Jy
! Component: 100  -  total flux cleaned = -0.016295 Jy
! Component: 150  -  total flux cleaned = -0.0155498 Jy
! Component: 200  -  total flux cleaned = -0.0150719 Jy
! Total flux subtracted in 200 components = -0.0150719 Jy
! Clean residual min=-0.007187 max=0.007582 Jy/beam
! Clean residual mean=-0.000019 rms=0.001813 Jy/beam
! Combined flux in latest and established models = 0.167363 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 36 components and 0.167363 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102067Jy  sigma=0.133761
! Fit after  self-cal, rms=0.103353Jy  sigma=0.131824
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103353Jy  sigma=0.131824
! Fit after  self-cal, rms=0.097812Jy  sigma=0.128036
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.672 mas, bmaj=10.58 mas, bpa=12.51 degrees
! Estimated noise=6.61015 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0137221 Jy
! Component: 100  -  total flux cleaned = -0.0145209 Jy
! Component: 150  -  total flux cleaned = -0.0143112 Jy
! Component: 200  -  total flux cleaned = -0.0139211 Jy
! Total flux subtracted in 200 components = -0.0139211 Jy
! Clean residual min=-0.006009 max=0.006934 Jy/beam
! Clean residual mean=-0.000017 rms=0.001598 Jy/beam
! Combined flux in latest and established models = 0.153442 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 45 components and 0.153442 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092315Jy  sigma=0.131383
! Fit after  self-cal, rms=0.092304Jy  sigma=0.131307
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-91.5, -70).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00595457 Jy
! Component: 100  -  total flux cleaned = 0.00770369 Jy
! Component: 150  -  total flux cleaned = 0.00849079 Jy
! Component: 200  -  total flux cleaned = 0.00890674 Jy
! Total flux subtracted in 200 components = 0.00890674 Jy
! Clean residual min=-0.004961 max=0.004701 Jy/beam
! Clean residual mean=-0.000016 rms=0.001259 Jy/beam
! Combined flux in latest and established models = 0.162349 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 63 components and 0.162349 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091813Jy  sigma=0.130579
! Fit after  self-cal, rms=0.091771Jy  sigma=0.130413
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091771Jy  sigma=0.130413
! Fit after  self-cal, rms=0.086317Jy  sigma=0.126932
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.615 mas, bmaj=10.5 mas, bpa=12.12 degrees
! Estimated noise=5.88793 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0119926 Jy
! Component: 100  -  total flux cleaned = -0.0129213 Jy
! Component: 150  -  total flux cleaned = -0.0122337 Jy
! Component: 200  -  total flux cleaned = -0.0120738 Jy
! Total flux subtracted in 200 components = -0.0120738 Jy
! Clean residual min=-0.004254 max=0.004507 Jy/beam
! Clean residual mean=-0.000011 rms=0.001118 Jy/beam
! Combined flux in latest and established models = 0.150275 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 68 components and 0.150275 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081590Jy  sigma=0.129963
! Fit after  self-cal, rms=0.081542Jy  sigma=0.129891
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000214906 Jy
! Component: 100  -  total flux cleaned = 0.000344124 Jy
! Component: 150  -  total flux cleaned = 0.000521844 Jy
! Component: 200  -  total flux cleaned = 0.000684441 Jy
! Total flux subtracted in 200 components = 0.000684441 Jy
! Clean residual min=-0.004053 max=0.004105 Jy/beam
! Clean residual mean=-0.000010 rms=0.001064 Jy/beam
! Combined flux in latest and established models = 0.150959 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 78 components and 0.150959 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081298Jy  sigma=0.130071
! Fit after  self-cal, rms=0.081289Jy  sigma=0.130051
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081289Jy  sigma=0.130051
! Fit after  self-cal, rms=0.076821Jy  sigma=0.126636
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.268 mas, bmaj=13.1 mas, bpa=13.04 degrees
! Estimated noise=6.09318 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0106891 Jy
! Component: 100  -  total flux cleaned = -0.0112616 Jy
! Component: 150  -  total flux cleaned = -0.0111467 Jy
! Component: 200  -  total flux cleaned = -0.0115591 Jy
! Total flux subtracted in 200 components = -0.0115591 Jy
! Clean residual min=-0.004338 max=0.004969 Jy/beam
! Clean residual mean=-0.000012 rms=0.001219 Jy/beam
! Combined flux in latest and established models = 0.1394 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 83 components and 0.1394 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072737Jy  sigma=0.129861
! Fit after  self-cal, rms=0.072707Jy  sigma=0.129732
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000361475 Jy
! Component: 100  -  total flux cleaned = -0.000364207 Jy
! Component: 150  -  total flux cleaned = -0.000286704 Jy
! Component: 200  -  total flux cleaned = -0.000183342 Jy
! Total flux subtracted in 200 components = -0.000183342 Jy
! Clean residual min=-0.004279 max=0.004613 Jy/beam
! Clean residual mean=-0.000010 rms=0.001175 Jy/beam
! Combined flux in latest and established models = 0.139217 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 101 components and 0.139217 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072552Jy  sigma=0.129996
! Fit after  self-cal, rms=0.072559Jy  sigma=0.129986
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.566 mas, bmaj=10.43 mas, bpa=11.77 degrees
! Estimated noise=5.26158 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.566 x 10.43 at 11.77 degrees (North through East)
! Clean map  min=-0.013791  max=0.11509 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.441 mas, bmaj=9.318 mas, bpa=11.89 degrees
! Estimated noise=11.3598 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0725691 Jy
! Component: 100  -  total flux cleaned = 0.102624 Jy
! Component: 150  -  total flux cleaned = 0.112041 Jy
! Component: 200  -  total flux cleaned = 0.11622 Jy
! Total flux subtracted in 200 components = 0.11622 Jy
! Clean residual min=-0.008965 max=0.009520 Jy/beam
! Clean residual mean=-0.000008 rms=0.002183 Jy/beam
! Combined flux in latest and established models = 0.11622 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.11622 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.566 mas, bmaj=10.43 mas, bpa=11.77 degrees
! Estimated noise=5.26158 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.5, -3.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0140829 Jy
! Component: 100  -  total flux cleaned = 0.0161098 Jy
! Component: 150  -  total flux cleaned = 0.0182576 Jy
! Component: 200  -  total flux cleaned = 0.019917 Jy
! Total flux subtracted in 200 components = 0.019917 Jy
! Clean residual min=-0.005448 max=0.004803 Jy/beam
! Clean residual mean=-0.000007 rms=0.001474 Jy/beam
! Combined flux in latest and established models = 0.136137 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 47 components and 0.136137 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.268 mas, bmaj=13.1 mas, bpa=13.04 degrees
! Estimated noise=6.09318 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00260997 Jy
! Component: 100  -  total flux cleaned = 0.00414577 Jy
! Component: 150  -  total flux cleaned = 0.00488455 Jy
! Component: 200  -  total flux cleaned = 0.0056269 Jy
! Total flux subtracted in 200 components = 0.0056269 Jy
! Clean residual min=-0.004521 max=0.003396 Jy/beam
! Clean residual mean=-0.000001 rms=0.001249 Jy/beam
! Combined flux in latest and established models = 0.141764 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000618007 Jy
! Component: 100  -  total flux cleaned = 0.00113749 Jy
! Component: 150  -  total flux cleaned = 0.00143792 Jy
! Component: 200  -  total flux cleaned = 0.00156654 Jy
! Total flux subtracted in 200 components = 0.00156654 Jy
! Clean residual min=-0.004021 max=0.002903 Jy/beam
! Clean residual mean=0.000005 rms=0.001062 Jy/beam
! Combined flux in latest and established models = 0.14333 Jy
! Adding 68 model components to the UV plane model.
! The established model now contains 109 components and 0.14333 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.566 mas, bmaj=10.43 mas, bpa=11.77 degrees
! Estimated noise=5.26158 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000107967 Jy
! Component: 100  -  total flux cleaned = -0.000559074 Jy
! Component: 150  -  total flux cleaned = -0.000851597 Jy
! Component: 200  -  total flux cleaned = -0.000729813 Jy
! Total flux subtracted in 200 components = -0.000729813 Jy
! Clean residual min=-0.003345 max=0.002808 Jy/beam
! Clean residual mean=0.000002 rms=0.000816 Jy/beam
! Combined flux in latest and established models = 0.142601 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 139 components and 0.142601 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071547Jy  sigma=0.130944
! Fit after  self-cal, rms=0.071505Jy  sigma=0.130656
wmodel /g0/scr/pima/npcsb_uvs/J2310+8857_S_map.mod
! Writing 139 model components to file: /g0/scr/pima/npcsb_uvs/J2310+8857_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J2310+8857_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J2310+8857_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J2310+8857_S_map.win
! wwins: Wrote 3 windows to /g0/scr/pima/npcsb_uvs/J2310+8857_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00142967 Jy
! Component: 100  -  total flux cleaned = -0.00248444 Jy
! Component: 150  -  total flux cleaned = -0.00326075 Jy
! Component: 200  -  total flux cleaned = -0.00377698 Jy
! Component: 250  -  total flux cleaned = -0.00406233 Jy
! Component: 300  -  total flux cleaned = -0.0042182 Jy
! Component: 350  -  total flux cleaned = -0.00444034 Jy
! Component: 400  -  total flux cleaned = -0.00465277 Jy
! Component: 450  -  total flux cleaned = -0.00475522 Jy
! Component: 500  -  total flux cleaned = -0.00488794 Jy
! Component: 550  -  total flux cleaned = -0.00504876 Jy
! Component: 600  -  total flux cleaned = -0.00514185 Jy
! Component: 650  -  total flux cleaned = -0.00517175 Jy
! Component: 700  -  total flux cleaned = -0.00520195 Jy
! Component: 750  -  total flux cleaned = -0.005346 Jy
! Component: 800  -  total flux cleaned = -0.00540223 Jy
! Component: 850  -  total flux cleaned = -0.00534751 Jy
! Component: 900  -  total flux cleaned = -0.00548278 Jy
! Component: 950  -  total flux cleaned = -0.00542918 Jy
! Component: 1000  -  total flux cleaned = -0.00548112 Jy
! Component: 1050  -  total flux cleaned = -0.00548087 Jy
! Component: 1100  -  total flux cleaned = -0.00560612 Jy
! Component: 1150  -  total flux cleaned = -0.0056556 Jy
! Component: 1200  -  total flux cleaned = -0.0057283 Jy
! Component: 1250  -  total flux cleaned = -0.00565723 Jy
! Component: 1300  -  total flux cleaned = -0.00570461 Jy
! Component: 1350  -  total flux cleaned = -0.00568119 Jy
! Component: 1400  -  total flux cleaned = -0.00568099 Jy
! Component: 1450  -  total flux cleaned = -0.00568139 Jy
! Component: 1500  -  total flux cleaned = -0.00568189 Jy
! Component: 1550  -  total flux cleaned = -0.00572563 Jy
! Component: 1600  -  total flux cleaned = -0.00566063 Jy
! Component: 1650  -  total flux cleaned = -0.00568211 Jy
! Component: 1700  -  total flux cleaned = -0.00568218 Jy
! Component: 1750  -  total flux cleaned = -0.00566123 Jy
! Component: 1800  -  total flux cleaned = -0.00570241 Jy
! Component: 1850  -  total flux cleaned = -0.00568139 Jy
! Component: 1900  -  total flux cleaned = -0.00568118 Jy
! Component: 1950  -  total flux cleaned = -0.00562134 Jy
! Component: 2000  -  total flux cleaned = -0.00572035 Jy
! Component: 2050  -  total flux cleaned = -0.0057007 Jy
! Component: 2100  -  total flux cleaned = -0.00570085 Jy
! Component: 2150  -  total flux cleaned = -0.00577744 Jy
! Component: 2200  -  total flux cleaned = -0.0057772 Jy
! Component: 2250  -  total flux cleaned = -0.00581472 Jy
! Component: 2300  -  total flux cleaned = -0.00581478 Jy
! Component: 2350  -  total flux cleaned = -0.0058514 Jy
! Component: 2400  -  total flux cleaned = -0.00579653 Jy
! Component: 2450  -  total flux cleaned = -0.00583287 Jy
! Component: 2500  -  total flux cleaned = -0.00590444 Jy
! Component: 2550  -  total flux cleaned = -0.00581566 Jy
! Component: 2600  -  total flux cleaned = -0.00583325 Jy
! Component: 2650  -  total flux cleaned = -0.00579872 Jy
! Component: 2700  -  total flux cleaned = -0.00578156 Jy
! Component: 2750  -  total flux cleaned = -0.00581564 Jy
! Component: 2800  -  total flux cleaned = -0.00579851 Jy
! Component: 2850  -  total flux cleaned = -0.00578174 Jy
! Component: 2900  -  total flux cleaned = -0.0057818 Jy
! Component: 2950  -  total flux cleaned = -0.00573236 Jy
! Component: 3000  -  total flux cleaned = -0.00573241 Jy
! Component: 3050  -  total flux cleaned = -0.00569985 Jy
! Component: 3100  -  total flux cleaned = -0.0056997 Jy
! Component: 3150  -  total flux cleaned = -0.00563595 Jy
! Component: 3200  -  total flux cleaned = -0.00560434 Jy
! Component: 3250  -  total flux cleaned = -0.00555754 Jy
! Component: 3300  -  total flux cleaned = -0.00552648 Jy
! Component: 3350  -  total flux cleaned = -0.00543409 Jy
! Component: 3400  -  total flux cleaned = -0.00541899 Jy
! Component: 3450  -  total flux cleaned = -0.00538868 Jy
! Component: 3500  -  total flux cleaned = -0.00532849 Jy
! Component: 3550  -  total flux cleaned = -0.00523873 Jy
! Component: 3600  -  total flux cleaned = -0.00517947 Jy
! Component: 3650  -  total flux cleaned = -0.00512064 Jy
! Component: 3700  -  total flux cleaned = -0.00506219 Jy
! Component: 3750  -  total flux cleaned = -0.00504771 Jy
! Component: 3800  -  total flux cleaned = -0.00494679 Jy
! Component: 3850  -  total flux cleaned = -0.00491821 Jy
! Component: 3900  -  total flux cleaned = -0.00487553 Jy
! Component: 3950  -  total flux cleaned = -0.00481901 Jy
! Component: 4000  -  total flux cleaned = -0.00477684 Jy
! Component: 4050  -  total flux cleaned = -0.00476292 Jy
! Total flux subtracted in 4096 components = -0.00477672 Jy
! Clean residual min=-0.000917 max=0.000735 Jy/beam
! Clean residual mean=0.000005 rms=0.000257 Jy/beam
! Combined flux in latest and established models = 0.137824 Jy
keep
! Adding 271 model components to the UV plane model.
! The established model now contains 410 components and 0.137824 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J2310+8857_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.566 x 10.43 at 11.77 degrees (North through East)
! Clean map  min=-0.013547  max=0.1112 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J2310+8857_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.111203 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000256586 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.692212 0.692212 1.38442 2.76885 5.5377 11.0754 22.1508 44.3016 88.6032
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0007 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.111 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J2310+8857_S_uvs.log closed on Sat Oct  5 19:01:37 2013