! Started logfile: /g0/scr/pima/npcsb_uvs/J2130+8357_X_uvs.log on Sat Oct  5 18:55:05 2013
obs /g0/scr/pima/npcsb_uvs/J2130+8357_X_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J2130+8357_X_uva.fits
! AN table 1: 47 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.68026 visibilities/baseline/integration-bin.
! Found source: J2130+8357
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 4604 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J2130+8357_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004750Jy  sigma=0.725852
! Fit after  self-cal, rms=0.958751Jy  sigma=0.658795
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6103 mas, bmaj=2.503 mas, bpa=-8.776 degrees
! Estimated noise=29.1664 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0562361 Jy
! Component: 100  -  total flux cleaned = 0.0671107 Jy
! Total flux subtracted in 100 components = 0.0671107 Jy
! Clean residual min=-0.008097 max=0.008940 Jy/beam
! Clean residual mean=-0.000003 rms=0.002091 Jy/beam
! Combined flux in latest and established models = 0.0671107 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.0671107 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080093Jy  sigma=0.061884
! Fit after  self-cal, rms=0.077945Jy  sigma=0.060296
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7828 mas, bmaj=2.634 mas, bpa=-8.646 degrees
! Estimated noise=16.342 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00390349 Jy
! Component: 100  -  total flux cleaned = -0.00509017 Jy
! Component: 150  -  total flux cleaned = -0.00595634 Jy
! Component: 200  -  total flux cleaned = -0.00656461 Jy
! Total flux subtracted in 200 components = -0.00656461 Jy
! Clean residual min=-0.004221 max=0.005350 Jy/beam
! Clean residual mean=-0.000001 rms=0.001153 Jy/beam
! Combined flux in latest and established models = 0.0605461 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 13 components and 0.0605461 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078269Jy  sigma=0.059689
! Fit after  self-cal, rms=0.078066Jy  sigma=0.059617
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        0.92     HN        0.92     KP        0.94     
!   MK        0.92     NL        0.84     OV        0.91     PT        0.94     
!   SC        0.83     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.77     FD        1.09     HN        0.98     KP        0.91     
!   MK        0.75     NL        0.73     OV        0.84     PT        1.18     
!   SC        0.79     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     FD        0.89     HN        0.91     KP        0.74     
!   MK        0.83     NL        0.79     OV        0.91     PT        0.97     
!   SC        0.91     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.76     FD        0.89     HN        0.68     KP        0.72     
!   MK        0.76     NL        0.80     OV        0.90     PT        1.05     
!   SC        0.93     
! 
! 
! Fit before self-cal, rms=0.078066Jy  sigma=0.059617
! Fit after  self-cal, rms=0.066560Jy  sigma=0.056339
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7688 mas, bmaj=2.598 mas, bpa=-8.65 degrees
! Estimated noise=12.5007 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0123553 Jy
! Component: 100  -  total flux cleaned = -0.0145929 Jy
! Component: 150  -  total flux cleaned = -0.0143725 Jy
! Component: 200  -  total flux cleaned = -0.0141054 Jy
! Total flux subtracted in 200 components = -0.0141054 Jy
! Clean residual min=-0.002763 max=0.002767 Jy/beam
! Clean residual mean=-0.000001 rms=0.000611 Jy/beam
! Combined flux in latest and established models = 0.0464407 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 19 components and 0.0464407 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060251Jy  sigma=0.058239
! Fit after  self-cal, rms=0.060409Jy  sigma=0.058086
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060409Jy  sigma=0.058086
! Fit after  self-cal, rms=0.052268Jy  sigma=0.056102
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7694 mas, bmaj=2.594 mas, bpa=-8.602 degrees
! Estimated noise=9.74839 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00958873 Jy
! Component: 100  -  total flux cleaned = -0.01166 Jy
! Component: 150  -  total flux cleaned = -0.0115039 Jy
! Component: 200  -  total flux cleaned = -0.0112957 Jy
! Total flux subtracted in 200 components = -0.0112957 Jy
! Clean residual min=-0.002193 max=0.002179 Jy/beam
! Clean residual mean=0.000000 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.035145 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 26 components and 0.035145 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047401Jy  sigma=0.058028
! Fit after  self-cal, rms=0.047413Jy  sigma=0.057998
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (15.4, 24.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110871 Jy
! Component: 100  -  total flux cleaned = 0.000847483 Jy
! Component: 150  -  total flux cleaned = 0.000465362 Jy
! Component: 200  -  total flux cleaned = 0.00028989 Jy
! Total flux subtracted in 200 components = 0.00028989 Jy
! Clean residual min=-0.002039 max=0.002049 Jy/beam
! Clean residual mean=0.000000 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.0354349 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 38 components and 0.0354349 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047312Jy  sigma=0.057872
! Fit after  self-cal, rms=0.047306Jy  sigma=0.057826
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047306Jy  sigma=0.057826
! Fit after  self-cal, rms=0.040790Jy  sigma=0.055839
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7725 mas, bmaj=2.595 mas, bpa=-8.538 degrees
! Estimated noise=7.64176 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00724244 Jy
! Component: 100  -  total flux cleaned = -0.00852363 Jy
! Component: 150  -  total flux cleaned = -0.00827801 Jy
! Component: 200  -  total flux cleaned = -0.00818466 Jy
! Total flux subtracted in 200 components = -0.00818466 Jy
! Clean residual min=-0.001582 max=0.001430 Jy/beam
! Clean residual mean=0.000001 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.0272502 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 40 components and 0.0272502 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.037194Jy  sigma=0.057672
! Fit after  self-cal, rms=0.037168Jy  sigma=0.057626
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000252126 Jy
! Component: 100  -  total flux cleaned = 0.000237401 Jy
! Component: 150  -  total flux cleaned = 0.000118628 Jy
! Component: 200  -  total flux cleaned = 3.43585e-05 Jy
! Total flux subtracted in 200 components = 3.43585e-05 Jy
! Clean residual min=-0.001537 max=0.001392 Jy/beam
! Clean residual mean=0.000001 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.0272846 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 50 components and 0.0272846 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.037118Jy  sigma=0.057636
! Fit after  self-cal, rms=0.037114Jy  sigma=0.057625
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.037114Jy  sigma=0.057625
! Fit after  self-cal, rms=0.032034Jy  sigma=0.055681
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.097 mas, bmaj=3.121 mas, bpa=-1.184 degrees
! Estimated noise=8.48582 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00539294 Jy
! Component: 100  -  total flux cleaned = -0.00663038 Jy
! Component: 150  -  total flux cleaned = -0.00686665 Jy
! Component: 200  -  total flux cleaned = -0.00707515 Jy
! Total flux subtracted in 200 components = -0.00707515 Jy
! Clean residual min=-0.001346 max=0.001285 Jy/beam
! Clean residual mean=0.000001 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.0202094 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 53 components and 0.0202094 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.029330Jy  sigma=0.057404
! Fit after  self-cal, rms=0.029316Jy  sigma=0.057376
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000503224 Jy
! Component: 100  -  total flux cleaned = -0.000776211 Jy
! Component: 150  -  total flux cleaned = -0.000982501 Jy
! Component: 200  -  total flux cleaned = -0.00106938 Jy
! Total flux subtracted in 200 components = -0.00106938 Jy
! Clean residual min=-0.001259 max=0.001234 Jy/beam
! Clean residual mean=0.000000 rms=0.000316 Jy/beam
! Combined flux in latest and established models = 0.01914 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 58 components and 0.01914 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.029251Jy  sigma=0.057508
! Fit after  self-cal, rms=0.029254Jy  sigma=0.057496
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7767 mas, bmaj=2.597 mas, bpa=-8.539 degrees
! Estimated noise=6.00643 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7767 x 2.597 at -8.539 degrees (North through East)
! Clean map  min=-0.0025056  max=0.025343 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6065 mas, bmaj=2.46 mas, bpa=-8.709 degrees
! Estimated noise=10.55 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0211696 Jy
! Component: 100  -  total flux cleaned = 0.0260743 Jy
! Component: 150  -  total flux cleaned = 0.026636 Jy
! Component: 200  -  total flux cleaned = 0.0267406 Jy
! Total flux subtracted in 200 components = 0.0267406 Jy
! Clean residual min=-0.002694 max=0.002812 Jy/beam
! Clean residual mean=0.000000 rms=0.000673 Jy/beam
! Combined flux in latest and established models = 0.0267406 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0267406 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7767 mas, bmaj=2.597 mas, bpa=-8.539 degrees
! Estimated noise=6.00643 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00187937 Jy
! Component: 100  -  total flux cleaned = -0.00262948 Jy
! Component: 150  -  total flux cleaned = -0.00320664 Jy
! Component: 200  -  total flux cleaned = -0.00368177 Jy
! Total flux subtracted in 200 components = -0.00368177 Jy
! Clean residual min=-0.001393 max=0.001240 Jy/beam
! Clean residual mean=0.000001 rms=0.000322 Jy/beam
! Combined flux in latest and established models = 0.0230588 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 38 components and 0.0230588 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.097 mas, bmaj=3.121 mas, bpa=-1.184 degrees
! Estimated noise=8.48582 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00141763 Jy
! Component: 100  -  total flux cleaned = -0.00230945 Jy
! Component: 150  -  total flux cleaned = -0.00297718 Jy
! Component: 200  -  total flux cleaned = -0.00334699 Jy
! Total flux subtracted in 200 components = -0.00334699 Jy
! Clean residual min=-0.001234 max=0.001417 Jy/beam
! Clean residual mean=-0.000000 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.0197118 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000297306 Jy
! Component: 100  -  total flux cleaned = -0.000538255 Jy
! Component: 150  -  total flux cleaned = -0.000693386 Jy
! Component: 200  -  total flux cleaned = -0.00080759 Jy
! Total flux subtracted in 200 components = -0.00080759 Jy
! Clean residual min=-0.001151 max=0.001300 Jy/beam
! Clean residual mean=-0.000000 rms=0.000316 Jy/beam
! Combined flux in latest and established models = 0.0189042 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 63 components and 0.0189042 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7767 mas, bmaj=2.597 mas, bpa=-8.539 degrees
! Estimated noise=6.00643 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000397503 Jy
! Component: 100  -  total flux cleaned = 0.000284101 Jy
! Component: 150  -  total flux cleaned = 0.000285192 Jy
! Component: 200  -  total flux cleaned = 0.000246322 Jy
! Total flux subtracted in 200 components = 0.000246322 Jy
! Clean residual min=-0.001113 max=0.001109 Jy/beam
! Clean residual mean=-0.000000 rms=0.000266 Jy/beam
! Combined flux in latest and established models = 0.0191506 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 80 components and 0.0191506 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.029050Jy  sigma=0.057855
! Fit after  self-cal, rms=0.029056Jy  sigma=0.057825
wmodel /g0/scr/pima/npcsb_uvs/J2130+8357_X_map.mod
! Writing 80 model components to file: /g0/scr/pima/npcsb_uvs/J2130+8357_X_map.mod
wobs /g0/scr/pima/npcsb_uvs/J2130+8357_X_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J2130+8357_X_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J2130+8357_X_map.win
! wwins: Wrote 2 windows to /g0/scr/pima/npcsb_uvs/J2130+8357_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -6.335e-05 Jy
! Component: 100  -  total flux cleaned = -6.37685e-05 Jy
! Component: 150  -  total flux cleaned = -0.000116954 Jy
! Component: 200  -  total flux cleaned = -9.96165e-05 Jy
! Component: 250  -  total flux cleaned = -0.000115962 Jy
! Component: 300  -  total flux cleaned = -0.000131805 Jy
! Component: 350  -  total flux cleaned = -0.000131776 Jy
! Component: 400  -  total flux cleaned = -0.000177449 Jy
! Component: 450  -  total flux cleaned = -0.000251879 Jy
! Component: 500  -  total flux cleaned = -0.000281318 Jy
! Component: 550  -  total flux cleaned = -0.000338532 Jy
! Component: 600  -  total flux cleaned = -0.000338405 Jy
! Component: 650  -  total flux cleaned = -0.000324685 Jy
! Component: 700  -  total flux cleaned = -0.000297365 Jy
! Component: 750  -  total flux cleaned = -0.000257505 Jy
! Component: 800  -  total flux cleaned = -0.000231458 Jy
! Component: 850  -  total flux cleaned = -0.000218777 Jy
! Component: 900  -  total flux cleaned = -0.000180742 Jy
! Component: 950  -  total flux cleaned = -0.000130587 Jy
! Component: 1000  -  total flux cleaned = -0.0001306 Jy
! Component: 1050  -  total flux cleaned = -0.000118524 Jy
! Component: 1100  -  total flux cleaned = -7.01099e-05 Jy
! Component: 1150  -  total flux cleaned = -4.60947e-05 Jy
! Component: 1200  -  total flux cleaned = 1.25146e-06 Jy
! Component: 1250  -  total flux cleaned = 4.81441e-05 Jy
! Component: 1300  -  total flux cleaned = 5.98026e-05 Jy
! Component: 1350  -  total flux cleaned = 0.000117087 Jy
! Component: 1400  -  total flux cleaned = 0.000173508 Jy
! Component: 1450  -  total flux cleaned = 0.000207035 Jy
! Component: 1500  -  total flux cleaned = 0.0002625 Jy
! Component: 1550  -  total flux cleaned = 0.000273525 Jy
! Component: 1600  -  total flux cleaned = 0.000328159 Jy
! Component: 1650  -  total flux cleaned = 0.000360437 Jy
! Component: 1700  -  total flux cleaned = 0.000371138 Jy
! Component: 1750  -  total flux cleaned = 0.000424132 Jy
! Component: 1800  -  total flux cleaned = 0.000424226 Jy
! Component: 1850  -  total flux cleaned = 0.000455398 Jy
! Component: 1900  -  total flux cleaned = 0.00048634 Jy
! Component: 1950  -  total flux cleaned = 0.000476123 Jy
! Component: 2000  -  total flux cleaned = 0.000476165 Jy
! Component: 2050  -  total flux cleaned = 0.000496399 Jy
! Component: 2100  -  total flux cleaned = 0.000516371 Jy
! Component: 2150  -  total flux cleaned = 0.00053599 Jy
! Component: 2200  -  total flux cleaned = 0.000526082 Jy
! Component: 2250  -  total flux cleaned = 0.000535777 Jy
! Component: 2300  -  total flux cleaned = 0.00057441 Jy
! Component: 2350  -  total flux cleaned = 0.000564701 Jy
! Component: 2400  -  total flux cleaned = 0.000555128 Jy
! Component: 2450  -  total flux cleaned = 0.000574027 Jy
! Component: 2500  -  total flux cleaned = 0.000564502 Jy
! Component: 2550  -  total flux cleaned = 0.000573937 Jy
! Component: 2600  -  total flux cleaned = 0.000592576 Jy
! Component: 2650  -  total flux cleaned = 0.000592497 Jy
! Component: 2700  -  total flux cleaned = 0.000592421 Jy
! Component: 2750  -  total flux cleaned = 0.000583274 Jy
! Component: 2800  -  total flux cleaned = 0.000646207 Jy
! Component: 2850  -  total flux cleaned = 0.000619272 Jy
! Component: 2900  -  total flux cleaned = 0.000663674 Jy
! Component: 2950  -  total flux cleaned = 0.00068141 Jy
! Component: 3000  -  total flux cleaned = 0.000707699 Jy
! Component: 3050  -  total flux cleaned = 0.000751324 Jy
! Component: 3100  -  total flux cleaned = 0.00076862 Jy
! Component: 3150  -  total flux cleaned = 0.000794445 Jy
! Component: 3200  -  total flux cleaned = 0.000820094 Jy
! Component: 3250  -  total flux cleaned = 0.000828668 Jy
! Component: 3300  -  total flux cleaned = 0.000845647 Jy
! Component: 3350  -  total flux cleaned = 0.000870873 Jy
! Component: 3400  -  total flux cleaned = 0.000895986 Jy
! Component: 3450  -  total flux cleaned = 0.00091265 Jy
! Component: 3500  -  total flux cleaned = 0.000962187 Jy
! Component: 3550  -  total flux cleaned = 0.000962148 Jy
! Component: 3600  -  total flux cleaned = 0.000970332 Jy
! Component: 3650  -  total flux cleaned = 0.000986606 Jy
! Component: 3700  -  total flux cleaned = 0.00101894 Jy
! Component: 3750  -  total flux cleaned = 0.0010029 Jy
! Component: 3800  -  total flux cleaned = 0.00105888 Jy
! Component: 3850  -  total flux cleaned = 0.00109073 Jy
! Component: 3900  -  total flux cleaned = 0.00115401 Jy
! Component: 3950  -  total flux cleaned = 0.00116973 Jy
! Component: 4000  -  total flux cleaned = 0.00121669 Jy
! Component: 4050  -  total flux cleaned = 0.00123228 Jy
! Total flux subtracted in 4096 components = 0.00127104 Jy
! Clean residual min=-0.000485 max=0.000465 Jy/beam
! Clean residual mean=-0.000001 rms=0.000134 Jy/beam
! Combined flux in latest and established models = 0.0204216 Jy
keep
! Adding 270 model components to the UV plane model.
! The established model now contains 350 components and 0.0204216 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J2130+8357_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7767 x 2.597 at -8.539 degrees (North through East)
! Clean map  min=-0.0023952  max=0.025271 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J2130+8357_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0252709 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000134284 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.59414 1.59414 3.18827 6.37655 12.7531 25.5062 51.0124
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0004 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.025 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J2130+8357_X_uvs.log closed on Sat Oct  5 18:55:09 2013