! Started logfile: /g0/scr/pima/npcsb_uvs/J2101+0341_S_uvs.log on Sat Oct  5 19:01:09 2013
obs /g0/scr/pima/npcsb_uvs/J2101+0341_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J2101+0341_S_uva.fits
! AN table 1: 14 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.636905 visibilities/baseline/integration-bin.
! Found source: J2101+0341
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1284 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J2101+0341_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.158603Jy  sigma=4.896620
! Fit after  self-cal, rms=0.506673Jy  sigma=1.885234
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.125 mas, bmaj=10.87 mas, bpa=-17.55 degrees
! Estimated noise=6.465 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.409143 Jy
! Component: 100  -  total flux cleaned = 0.515502 Jy
! Total flux subtracted in 100 components = 0.515502 Jy
! Clean residual min=-0.028410 max=0.049671 Jy/beam
! Clean residual mean=0.000069 rms=0.010008 Jy/beam
! Combined flux in latest and established models = 0.515502 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.515502 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.145362Jy  sigma=0.621665
! Fit after  self-cal, rms=0.145391Jy  sigma=0.621549
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.761 mas, bmaj=11.07 mas, bpa=-17.06 degrees
! Estimated noise=5.04071 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0494275 Jy
! Component: 100  -  total flux cleaned = 0.0728087 Jy
! Component: 150  -  total flux cleaned = 0.0750668 Jy
! Component: 200  -  total flux cleaned = 0.075837 Jy
! Total flux subtracted in 200 components = 0.075837 Jy
! Clean residual min=-0.025388 max=0.035965 Jy/beam
! Clean residual mean=0.000039 rms=0.007287 Jy/beam
! Combined flux in latest and established models = 0.591339 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 28 components and 0.591339 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.135367Jy  sigma=0.529169
! Fit after  self-cal, rms=0.135388Jy  sigma=0.529111
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.98     HN        0.90     KP        0.96     
!   LA        1.09     MK        0.91     NL        1.25     OV        0.97     
!   PT        1.08     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.04     HN        0.91     KP        1.00     
!   LA        1.04     MK        0.99     NL        1.32     OV        0.99     
!   PT        1.00     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.76     FD        1.04     HN        0.93     KP        0.97     
!   LA        0.85     MK        1.07     NL        1.42     OV        1.02     
!   PT        1.06     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.08     HN        0.88     KP        0.88     
!   LA        0.72     MK        1.11     NL        1.35     OV        0.90     
!   PT        0.95     
! 
! 
! Fit before self-cal, rms=0.135388Jy  sigma=0.529111
! Fit after  self-cal, rms=0.093302Jy  sigma=0.340649
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.813 mas, bmaj=10.98 mas, bpa=-16.69 degrees
! Estimated noise=4.95966 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00504684 Jy
! Component: 100  -  total flux cleaned = -0.00687737 Jy
! Component: 150  -  total flux cleaned = -0.0071275 Jy
! Component: 200  -  total flux cleaned = -0.00722847 Jy
! Total flux subtracted in 200 components = -0.00722847 Jy
! Clean residual min=-0.006620 max=0.006576 Jy/beam
! Clean residual mean=-0.000023 rms=0.001768 Jy/beam
! Combined flux in latest and established models = 0.584111 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 39 components and 0.584111 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092493Jy  sigma=0.341260
! Fit after  self-cal, rms=0.092776Jy  sigma=0.340863
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092776Jy  sigma=0.340863
! Fit after  self-cal, rms=0.092518Jy  sigma=0.339984
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.81 mas, bmaj=10.99 mas, bpa=-16.7 degrees
! Estimated noise=4.90858 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00482825 Jy
! Component: 100  -  total flux cleaned = -0.0058723 Jy
! Component: 150  -  total flux cleaned = -0.00621276 Jy
! Component: 200  -  total flux cleaned = -0.00635134 Jy
! Total flux subtracted in 200 components = -0.00635134 Jy
! Clean residual min=-0.006472 max=0.006477 Jy/beam
! Clean residual mean=-0.000023 rms=0.001737 Jy/beam
! Combined flux in latest and established models = 0.577759 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 49 components and 0.577759 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091756Jy  sigma=0.340800
! Fit after  self-cal, rms=0.091760Jy  sigma=0.340788
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.34729e-05 Jy
! Component: 100  -  total flux cleaned = 2.45115e-05 Jy
! Component: 150  -  total flux cleaned = 2.49856e-05 Jy
! Component: 200  -  total flux cleaned = 5.044e-05 Jy
! Total flux subtracted in 200 components = 5.044e-05 Jy
! Clean residual min=-0.006490 max=0.006458 Jy/beam
! Clean residual mean=-0.000023 rms=0.001735 Jy/beam
! Combined flux in latest and established models = 0.57781 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 59 components and 0.57781 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091734Jy  sigma=0.340778
! Fit after  self-cal, rms=0.091738Jy  sigma=0.340769
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091738Jy  sigma=0.340769
! Fit after  self-cal, rms=0.091468Jy  sigma=0.339811
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.805 mas, bmaj=10.99 mas, bpa=-16.72 degrees
! Estimated noise=4.85475 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00476727 Jy
! Component: 100  -  total flux cleaned = -0.00576871 Jy
! Component: 150  -  total flux cleaned = -0.00597353 Jy
! Component: 200  -  total flux cleaned = -0.00604559 Jy
! Total flux subtracted in 200 components = -0.00604559 Jy
! Clean residual min=-0.006424 max=0.006407 Jy/beam
! Clean residual mean=-0.000023 rms=0.001713 Jy/beam
! Combined flux in latest and established models = 0.571764 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 60 components and 0.571764 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090711Jy  sigma=0.340717
! Fit after  self-cal, rms=0.090714Jy  sigma=0.340710
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.6978e-05 Jy
! Component: 100  -  total flux cleaned = 6.7354e-05 Jy
! Component: 150  -  total flux cleaned = 8.75768e-05 Jy
! Component: 200  -  total flux cleaned = 6.78446e-05 Jy
! Total flux subtracted in 200 components = 6.78446e-05 Jy
! Clean residual min=-0.006497 max=0.006384 Jy/beam
! Clean residual mean=-0.000023 rms=0.001712 Jy/beam
! Combined flux in latest and established models = 0.571832 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 65 components and 0.571832 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090698Jy  sigma=0.340707
! Fit after  self-cal, rms=0.090703Jy  sigma=0.340700
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090703Jy  sigma=0.340700
! Fit after  self-cal, rms=0.090435Jy  sigma=0.339736
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.221 mas, bmaj=12.66 mas, bpa=3.624 degrees
! Estimated noise=5.35622 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00458691 Jy
! Component: 100  -  total flux cleaned = -0.00588707 Jy
! Component: 150  -  total flux cleaned = -0.00637778 Jy
! Component: 200  -  total flux cleaned = -0.00639426 Jy
! Total flux subtracted in 200 components = -0.00639426 Jy
! Clean residual min=-0.007997 max=0.007719 Jy/beam
! Clean residual mean=-0.000038 rms=0.002175 Jy/beam
! Combined flux in latest and established models = 0.565438 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 76 components and 0.565438 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089693Jy  sigma=0.340673
! Fit after  self-cal, rms=0.089691Jy  sigma=0.340632
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.56729e-05 Jy
! Component: 100  -  total flux cleaned = -1.56513e-05 Jy
! Component: 150  -  total flux cleaned = -6.5999e-05 Jy
! Component: 200  -  total flux cleaned = -9.60897e-05 Jy
! Total flux subtracted in 200 components = -9.60897e-05 Jy
! Clean residual min=-0.007902 max=0.007743 Jy/beam
! Clean residual mean=-0.000038 rms=0.002170 Jy/beam
! Combined flux in latest and established models = 0.565342 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 86 components and 0.565342 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089664Jy  sigma=0.340718
! Fit after  self-cal, rms=0.089669Jy  sigma=0.340705
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.801 mas, bmaj=10.99 mas, bpa=-16.73 degrees
! Estimated noise=4.80091 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.801 x 10.99 at -16.73 degrees (North through East)
! Clean map  min=-0.0061733  max=0.49983 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.156 mas, bmaj=10.76 mas, bpa=-17.39 degrees
! Estimated noise=6.21654 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.39159 Jy
! Component: 100  -  total flux cleaned = 0.491364 Jy
! Component: 150  -  total flux cleaned = 0.532067 Jy
! Component: 200  -  total flux cleaned = 0.553046 Jy
! Total flux subtracted in 200 components = 0.553046 Jy
! Clean residual min=-0.009884 max=0.012105 Jy/beam
! Clean residual mean=-0.000001 rms=0.002531 Jy/beam
! Combined flux in latest and established models = 0.553046 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.553046 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.801 mas, bmaj=10.99 mas, bpa=-16.73 degrees
! Estimated noise=4.80091 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4.5, 5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0121248 Jy
! Component: 100  -  total flux cleaned = 0.0134485 Jy
! Component: 150  -  total flux cleaned = 0.0139822 Jy
! Component: 200  -  total flux cleaned = 0.0142574 Jy
! Total flux subtracted in 200 components = 0.0142574 Jy
! Clean residual min=-0.006858 max=0.006050 Jy/beam
! Clean residual mean=-0.000024 rms=0.001736 Jy/beam
! Combined flux in latest and established models = 0.567304 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 38 components and 0.567304 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.221 mas, bmaj=12.66 mas, bpa=3.624 degrees
! Estimated noise=5.35622 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000226481 Jy
! Component: 100  -  total flux cleaned = -0.000281705 Jy
! Component: 150  -  total flux cleaned = -0.000870471 Jy
! Component: 200  -  total flux cleaned = -0.00143434 Jy
! Total flux subtracted in 200 components = -0.00143434 Jy
! Clean residual min=-0.007543 max=0.007357 Jy/beam
! Clean residual mean=-0.000034 rms=0.002099 Jy/beam
! Combined flux in latest and established models = 0.565869 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000488972 Jy
! Component: 100  -  total flux cleaned = -0.000916245 Jy
! Component: 150  -  total flux cleaned = -0.00124872 Jy
! Component: 200  -  total flux cleaned = -0.00158707 Jy
! Total flux subtracted in 200 components = -0.00158707 Jy
! Clean residual min=-0.007176 max=0.007396 Jy/beam
! Clean residual mean=-0.000031 rms=0.002060 Jy/beam
! Combined flux in latest and established models = 0.564282 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 71 components and 0.564282 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.801 mas, bmaj=10.99 mas, bpa=-16.73 degrees
! Estimated noise=4.80091 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.30435e-05 Jy
! Component: 100  -  total flux cleaned = 0.000108881 Jy
! Component: 150  -  total flux cleaned = -9.9957e-05 Jy
! Component: 200  -  total flux cleaned = -0.000100736 Jy
! Total flux subtracted in 200 components = -0.000100736 Jy
! Clean residual min=-0.005685 max=0.006357 Jy/beam
! Clean residual mean=-0.000018 rms=0.001620 Jy/beam
! Combined flux in latest and established models = 0.564181 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 91 components and 0.564181 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089554Jy  sigma=0.340305
! Fit after  self-cal, rms=0.089522Jy  sigma=0.340202
wmodel /g0/scr/pima/npcsb_uvs/J2101+0341_S_map.mod
! Writing 91 model components to file: /g0/scr/pima/npcsb_uvs/J2101+0341_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J2101+0341_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J2101+0341_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J2101+0341_S_map.win
! wwins: Wrote 2 windows to /g0/scr/pima/npcsb_uvs/J2101+0341_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00220695 Jy
! Component: 100  -  total flux cleaned = 0.00260691 Jy
! Component: 150  -  total flux cleaned = 0.00306658 Jy
! Component: 200  -  total flux cleaned = 0.00358566 Jy
! Component: 250  -  total flux cleaned = 0.00382325 Jy
! Component: 300  -  total flux cleaned = 0.00389929 Jy
! Component: 350  -  total flux cleaned = 0.00397133 Jy
! Component: 400  -  total flux cleaned = 0.00423938 Jy
! Component: 450  -  total flux cleaned = 0.00417531 Jy
! Component: 500  -  total flux cleaned = 0.00423757 Jy
! Component: 550  -  total flux cleaned = 0.00400315 Jy
! Component: 600  -  total flux cleaned = 0.00394708 Jy
! Component: 650  -  total flux cleaned = 0.00378119 Jy
! Component: 700  -  total flux cleaned = 0.00378308 Jy
! Component: 750  -  total flux cleaned = 0.00367931 Jy
! Component: 800  -  total flux cleaned = 0.00378122 Jy
! Component: 850  -  total flux cleaned = 0.00378167 Jy
! Component: 900  -  total flux cleaned = 0.00387781 Jy
! Component: 950  -  total flux cleaned = 0.00383036 Jy
! Component: 1000  -  total flux cleaned = 0.00387539 Jy
! Component: 1050  -  total flux cleaned = 0.00383055 Jy
! Component: 1100  -  total flux cleaned = 0.00387467 Jy
! Component: 1150  -  total flux cleaned = 0.00378856 Jy
! Component: 1200  -  total flux cleaned = 0.00378949 Jy
! Component: 1250  -  total flux cleaned = 0.00395452 Jy
! Component: 1300  -  total flux cleaned = 0.00391284 Jy
! Component: 1350  -  total flux cleaned = 0.0039125 Jy
! Component: 1400  -  total flux cleaned = 0.00387274 Jy
! Component: 1450  -  total flux cleaned = 0.00383455 Jy
! Component: 1500  -  total flux cleaned = 0.00375885 Jy
! Component: 1550  -  total flux cleaned = 0.0036849 Jy
! Component: 1600  -  total flux cleaned = 0.0036848 Jy
! Component: 1650  -  total flux cleaned = 0.00361285 Jy
! Component: 1700  -  total flux cleaned = 0.00350655 Jy
! Component: 1750  -  total flux cleaned = 0.00357546 Jy
! Component: 1800  -  total flux cleaned = 0.00340365 Jy
! Component: 1850  -  total flux cleaned = 0.00336973 Jy
! Component: 1900  -  total flux cleaned = 0.00320304 Jy
! Component: 1950  -  total flux cleaned = 0.00323619 Jy
! Component: 2000  -  total flux cleaned = 0.00310582 Jy
! Component: 2050  -  total flux cleaned = 0.00284985 Jy
! Component: 2100  -  total flux cleaned = 0.00275543 Jy
! Component: 2150  -  total flux cleaned = 0.00256816 Jy
! Component: 2200  -  total flux cleaned = 0.00235229 Jy
! Component: 2250  -  total flux cleaned = 0.00220039 Jy
! Component: 2300  -  total flux cleaned = 0.00202055 Jy
! Component: 2350  -  total flux cleaned = 0.00187213 Jy
! Component: 2400  -  total flux cleaned = 0.00160867 Jy
! Component: 2450  -  total flux cleaned = 0.00149275 Jy
! Component: 2500  -  total flux cleaned = 0.0012636 Jy
! Component: 2550  -  total flux cleaned = 0.00106584 Jy
! Component: 2600  -  total flux cleaned = 0.000842163 Jy
! Component: 2650  -  total flux cleaned = 0.000676549 Jy
! Component: 2700  -  total flux cleaned = 0.000512013 Jy
! Component: 2750  -  total flux cleaned = 0.000267887 Jy
! Component: 2800  -  total flux cleaned = 0.000214109 Jy
! Component: 2850  -  total flux cleaned = 5.41293e-05 Jy
! Component: 2900  -  total flux cleaned = -5.12957e-05 Jy
! Component: 2950  -  total flux cleaned = -0.00015602 Jy
! Component: 3000  -  total flux cleaned = -0.000285735 Jy
! Component: 3050  -  total flux cleaned = -0.000362892 Jy
! Component: 3100  -  total flux cleaned = -0.000464813 Jy
! Component: 3150  -  total flux cleaned = -0.000591055 Jy
! Component: 3200  -  total flux cleaned = -0.000741168 Jy
! Component: 3250  -  total flux cleaned = -0.00084096 Jy
! Component: 3300  -  total flux cleaned = -0.000964419 Jy
! Component: 3350  -  total flux cleaned = -0.00106238 Jy
! Component: 3400  -  total flux cleaned = -0.00111116 Jy
! Component: 3450  -  total flux cleaned = -0.00120756 Jy
! Component: 3500  -  total flux cleaned = -0.00127954 Jy
! Component: 3550  -  total flux cleaned = -0.00146934 Jy
! Component: 3600  -  total flux cleaned = -0.00146949 Jy
! Component: 3650  -  total flux cleaned = -0.00158618 Jy
! Component: 3700  -  total flux cleaned = -0.00163244 Jy
! Component: 3750  -  total flux cleaned = -0.00163227 Jy
! Component: 3800  -  total flux cleaned = -0.00165531 Jy
! Component: 3850  -  total flux cleaned = -0.0018147 Jy
! Component: 3900  -  total flux cleaned = -0.00181452 Jy
! Component: 3950  -  total flux cleaned = -0.00179204 Jy
! Component: 4000  -  total flux cleaned = -0.00190396 Jy
! Component: 4050  -  total flux cleaned = -0.00197092 Jy
! Total flux subtracted in 4096 components = -0.00205948 Jy
! Clean residual min=-0.001238 max=0.001523 Jy/beam
! Clean residual mean=-0.000006 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.562122 Jy
keep
! Adding 332 model components to the UV plane model.
! The established model now contains 423 components and 0.562123 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J2101+0341_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.801 x 10.99 at -16.73 degrees (North through East)
! Clean map  min=-0.0033983  max=0.49896 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J2101+0341_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.498965 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000385064 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.231518 0.231518 0.463035 0.92607 1.85214 3.70428 7.40856 14.8171 29.6343 59.2685
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0011 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.498 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J2101+0341_S_uvs.log closed on Sat Oct  5 19:01:13 2013