! Started logfile: /g0/scr/pima/npcsb_uvs/J2042+7508_S_uvs.log on Sat Oct  5 19:01:04 2013
obs /g0/scr/pima/npcsb_uvs/J2042+7508_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J2042+7508_S_uva.fits
! AN table 1: 47 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.988652 visibilities/baseline/integration-bin.
! Found source: J2042+7508
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 8364 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J2042+7508_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.028582Jy  sigma=1.685177
! Fit after  self-cal, rms=0.812853Jy  sigma=1.248101
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.357 mas, bmaj=10.08 mas, bpa=5.124 degrees
! Estimated noise=10.2825 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.162765 Jy
! Component: 100  -  total flux cleaned = 0.200721 Jy
! Total flux subtracted in 100 components = 0.200721 Jy
! Clean residual min=-0.009754 max=0.016865 Jy/beam
! Clean residual mean=0.000010 rms=0.002817 Jy/beam
! Combined flux in latest and established models = 0.200721 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.200721 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103100Jy  sigma=0.174577
! Fit after  self-cal, rms=0.103078Jy  sigma=0.174553
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.182 mas, bmaj=10.45 mas, bpa=3.764 degrees
! Estimated noise=5.09704 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0221664 Jy
! Component: 100  -  total flux cleaned = 0.0325649 Jy
! Component: 150  -  total flux cleaned = 0.0393069 Jy
! Component: 200  -  total flux cleaned = 0.043797 Jy
! Total flux subtracted in 200 components = 0.043797 Jy
! Clean residual min=-0.008980 max=0.013116 Jy/beam
! Clean residual mean=0.000022 rms=0.002477 Jy/beam
! Combined flux in latest and established models = 0.244518 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 21 components and 0.244518 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102965Jy  sigma=0.160932
! Fit after  self-cal, rms=0.102960Jy  sigma=0.160837
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     HN        0.89     KP        0.93     
!   LA        1.06     MK        0.88     NL        1.08     OV        0.99     
!   PT        1.04     SC        0.89     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        0.92     KP        0.93     
!   LA        0.98     MK        0.92     NL        1.26     OV        0.99     
!   PT        0.99     SC        0.88     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.04     HN        0.95     KP        0.93     
!   LA        0.80     MK        1.07     NL        1.28     OV        1.00     
!   PT        1.04     SC        0.95     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.99     HN        0.88     KP        0.87     
!   LA        0.67     MK        1.03     NL        1.24     OV        0.89     
!   PT        0.92     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.102960Jy  sigma=0.160837
! Fit after  self-cal, rms=0.094929Jy  sigma=0.144520
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.164 mas, bmaj=10.4 mas, bpa=3.59 degrees
! Estimated noise=4.71421 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0113647 Jy
! Component: 100  -  total flux cleaned = -0.0129148 Jy
! Component: 150  -  total flux cleaned = -0.0129877 Jy
! Component: 200  -  total flux cleaned = -0.0128744 Jy
! Total flux subtracted in 200 components = -0.0128744 Jy
! Clean residual min=-0.002842 max=0.003114 Jy/beam
! Clean residual mean=0.000010 rms=0.000808 Jy/beam
! Combined flux in latest and established models = 0.231643 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 29 components and 0.231643 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090810Jy  sigma=0.146488
! Fit after  self-cal, rms=0.090982Jy  sigma=0.146356
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090982Jy  sigma=0.146356
! Fit after  self-cal, rms=0.088916Jy  sigma=0.144330
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.148 mas, bmaj=10.4 mas, bpa=3.642 degrees
! Estimated noise=4.41633 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0105529 Jy
! Component: 100  -  total flux cleaned = -0.0125108 Jy
! Component: 150  -  total flux cleaned = -0.0126697 Jy
! Component: 200  -  total flux cleaned = -0.0127165 Jy
! Total flux subtracted in 200 components = -0.0127165 Jy
! Clean residual min=-0.002635 max=0.002889 Jy/beam
! Clean residual mean=0.000009 rms=0.000749 Jy/beam
! Combined flux in latest and established models = 0.218927 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 33 components and 0.218927 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085115Jy  sigma=0.146365
! Fit after  self-cal, rms=0.085117Jy  sigma=0.146362
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.83305e-05 Jy
! Component: 100  -  total flux cleaned = 5.69174e-05 Jy
! Component: 150  -  total flux cleaned = 5.60349e-05 Jy
! Component: 200  -  total flux cleaned = 5.6487e-05 Jy
! Total flux subtracted in 200 components = 5.6487e-05 Jy
! Clean residual min=-0.002616 max=0.002714 Jy/beam
! Clean residual mean=0.000009 rms=0.000738 Jy/beam
! Combined flux in latest and established models = 0.218983 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 38 components and 0.218983 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085023Jy  sigma=0.146386
! Fit after  self-cal, rms=0.085022Jy  sigma=0.146385
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085022Jy  sigma=0.146385
! Fit after  self-cal, rms=0.082989Jy  sigma=0.144305
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.128 mas, bmaj=10.4 mas, bpa=3.695 degrees
! Estimated noise=4.13169 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00978674 Jy
! Component: 100  -  total flux cleaned = -0.0118563 Jy
! Component: 150  -  total flux cleaned = -0.0119828 Jy
! Component: 200  -  total flux cleaned = -0.0120861 Jy
! Total flux subtracted in 200 components = -0.0120861 Jy
! Clean residual min=-0.002512 max=0.002686 Jy/beam
! Clean residual mean=0.000009 rms=0.000698 Jy/beam
! Combined flux in latest and established models = 0.206897 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 42 components and 0.206897 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079488Jy  sigma=0.146373
! Fit after  self-cal, rms=0.079487Jy  sigma=0.146371
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.44344e-05 Jy
! Component: 100  -  total flux cleaned = -3.99658e-05 Jy
! Component: 150  -  total flux cleaned = -6.61412e-05 Jy
! Component: 200  -  total flux cleaned = -6.61882e-05 Jy
! Total flux subtracted in 200 components = -6.61882e-05 Jy
! Clean residual min=-0.002501 max=0.002555 Jy/beam
! Clean residual mean=0.000009 rms=0.000692 Jy/beam
! Combined flux in latest and established models = 0.206831 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 48 components and 0.206831 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079412Jy  sigma=0.146413
! Fit after  self-cal, rms=0.079412Jy  sigma=0.146413
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079412Jy  sigma=0.146413
! Fit after  self-cal, rms=0.077499Jy  sigma=0.144330
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.597 mas, bmaj=11.84 mas, bpa=5.198 degrees
! Estimated noise=4.59618 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00808984 Jy
! Component: 100  -  total flux cleaned = -0.00990641 Jy
! Component: 150  -  total flux cleaned = -0.0102638 Jy
! Component: 200  -  total flux cleaned = -0.0102644 Jy
! Total flux subtracted in 200 components = -0.0102644 Jy
! Clean residual min=-0.003001 max=0.003245 Jy/beam
! Clean residual mean=0.000014 rms=0.000900 Jy/beam
! Combined flux in latest and established models = 0.196567 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 60 components and 0.196567 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074527Jy  sigma=0.146021
! Fit after  self-cal, rms=0.074526Jy  sigma=0.146019
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.54846e-05 Jy
! Component: 100  -  total flux cleaned = 4.60473e-05 Jy
! Component: 150  -  total flux cleaned = 6.74991e-05 Jy
! Component: 200  -  total flux cleaned = 8.79124e-05 Jy
! Total flux subtracted in 200 components = 8.79124e-05 Jy
! Clean residual min=-0.002990 max=0.003238 Jy/beam
! Clean residual mean=0.000014 rms=0.000893 Jy/beam
! Combined flux in latest and established models = 0.196655 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 62 components and 0.196655 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074412Jy  sigma=0.146145
! Fit after  self-cal, rms=0.074411Jy  sigma=0.146144
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.11 mas, bmaj=10.41 mas, bpa=3.738 degrees
! Estimated noise=3.8651 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.11 x 10.41 at 3.738 degrees (North through East)
! Clean map  min=-0.0023122  max=0.16413 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.31 mas, bmaj=10.05 mas, bpa=5.121 degrees
! Estimated noise=7.6041 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.120231 Jy
! Component: 100  -  total flux cleaned = 0.150183 Jy
! Component: 150  -  total flux cleaned = 0.164055 Jy
! Component: 200  -  total flux cleaned = 0.171565 Jy
! Total flux subtracted in 200 components = 0.171565 Jy
! Clean residual min=-0.004910 max=0.005155 Jy/beam
! Clean residual mean=0.000004 rms=0.001263 Jy/beam
! Combined flux in latest and established models = 0.171565 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.171565 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.11 mas, bmaj=10.41 mas, bpa=3.738 degrees
! Estimated noise=3.8651 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00841366 Jy
! Component: 100  -  total flux cleaned = 0.0133159 Jy
! Component: 150  -  total flux cleaned = 0.0165271 Jy
! Component: 200  -  total flux cleaned = 0.0187009 Jy
! Total flux subtracted in 200 components = 0.0187009 Jy
! Clean residual min=-0.002682 max=0.002838 Jy/beam
! Clean residual mean=0.000011 rms=0.000735 Jy/beam
! Combined flux in latest and established models = 0.190266 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 67 components and 0.190266 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.597 mas, bmaj=11.84 mas, bpa=5.198 degrees
! Estimated noise=4.59618 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0033442 Jy
! Component: 100  -  total flux cleaned = 0.00500978 Jy
! Component: 150  -  total flux cleaned = 0.00588155 Jy
! Component: 200  -  total flux cleaned = 0.00622895 Jy
! Total flux subtracted in 200 components = 0.00622895 Jy
! Clean residual min=-0.003049 max=0.003165 Jy/beam
! Clean residual mean=0.000014 rms=0.000883 Jy/beam
! Combined flux in latest and established models = 0.196495 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.45559e-05 Jy
! Component: 100  -  total flux cleaned = 0.000138895 Jy
! Component: 150  -  total flux cleaned = 0.000180171 Jy
! Component: 200  -  total flux cleaned = 0.00020726 Jy
! Total flux subtracted in 200 components = 0.00020726 Jy
! Clean residual min=-0.003005 max=0.003153 Jy/beam
! Clean residual mean=0.000013 rms=0.000879 Jy/beam
! Combined flux in latest and established models = 0.196702 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 85 components and 0.196702 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.11 mas, bmaj=10.41 mas, bpa=3.738 degrees
! Estimated noise=3.8651 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000986111 Jy
! Component: 100  -  total flux cleaned = -0.00107057 Jy
! Component: 150  -  total flux cleaned = -0.00112127 Jy
! Component: 200  -  total flux cleaned = -0.00119311 Jy
! Total flux subtracted in 200 components = -0.00119311 Jy
! Clean residual min=-0.002399 max=0.002431 Jy/beam
! Clean residual mean=0.000007 rms=0.000638 Jy/beam
! Combined flux in latest and established models = 0.195509 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 99 components and 0.195509 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074055Jy  sigma=0.146699
! Fit after  self-cal, rms=0.074046Jy  sigma=0.146694
wmodel /g0/scr/pima/npcsb_uvs/J2042+7508_S_map.mod
! Writing 99 model components to file: /g0/scr/pima/npcsb_uvs/J2042+7508_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J2042+7508_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J2042+7508_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J2042+7508_S_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsb_uvs/J2042+7508_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000185099 Jy
! Component: 100  -  total flux cleaned = 0.00026893 Jy
! Component: 150  -  total flux cleaned = 0.000346508 Jy
! Component: 200  -  total flux cleaned = 0.000595347 Jy
! Component: 250  -  total flux cleaned = 0.000835377 Jy
! Component: 300  -  total flux cleaned = 0.00109855 Jy
! Component: 350  -  total flux cleaned = 0.00125696 Jy
! Component: 400  -  total flux cleaned = 0.00125704 Jy
! Component: 450  -  total flux cleaned = 0.00131785 Jy
! Component: 500  -  total flux cleaned = 0.00134739 Jy
! Component: 550  -  total flux cleaned = 0.00131944 Jy
! Component: 600  -  total flux cleaned = 0.00134799 Jy
! Component: 650  -  total flux cleaned = 0.00140211 Jy
! Component: 700  -  total flux cleaned = 0.00142773 Jy
! Component: 750  -  total flux cleaned = 0.00134968 Jy
! Component: 800  -  total flux cleaned = 0.00147724 Jy
! Component: 850  -  total flux cleaned = 0.00147699 Jy
! Component: 900  -  total flux cleaned = 0.00150193 Jy
! Component: 950  -  total flux cleaned = 0.00162259 Jy
! Component: 1000  -  total flux cleaned = 0.00162218 Jy
! Component: 1050  -  total flux cleaned = 0.00178533 Jy
! Component: 1100  -  total flux cleaned = 0.00187677 Jy
! Component: 1150  -  total flux cleaned = 0.0020123 Jy
! Component: 1200  -  total flux cleaned = 0.00212419 Jy
! Component: 1250  -  total flux cleaned = 0.00219018 Jy
! Component: 1300  -  total flux cleaned = 0.0022555 Jy
! Component: 1350  -  total flux cleaned = 0.0023632 Jy
! Component: 1400  -  total flux cleaned = 0.00240576 Jy
! Component: 1450  -  total flux cleaned = 0.00242682 Jy
! Component: 1500  -  total flux cleaned = 0.00242677 Jy
! Component: 1550  -  total flux cleaned = 0.00255098 Jy
! Component: 1600  -  total flux cleaned = 0.00253025 Jy
! Component: 1650  -  total flux cleaned = 0.00253051 Jy
! Component: 1700  -  total flux cleaned = 0.00261101 Jy
! Component: 1750  -  total flux cleaned = 0.00269033 Jy
! Component: 1800  -  total flux cleaned = 0.00274908 Jy
! Component: 1850  -  total flux cleaned = 0.00280726 Jy
! Component: 1900  -  total flux cleaned = 0.00280705 Jy
! Component: 1950  -  total flux cleaned = 0.00282615 Jy
! Component: 2000  -  total flux cleaned = 0.00294 Jy
! Component: 2050  -  total flux cleaned = 0.00293982 Jy
! Component: 2100  -  total flux cleaned = 0.00303291 Jy
! Component: 2150  -  total flux cleaned = 0.00308826 Jy
! Component: 2200  -  total flux cleaned = 0.0032164 Jy
! Component: 2250  -  total flux cleaned = 0.00328907 Jy
! Component: 2300  -  total flux cleaned = 0.00334305 Jy
! Component: 2350  -  total flux cleaned = 0.00341444 Jy
! Component: 2400  -  total flux cleaned = 0.00355623 Jy
! Component: 2450  -  total flux cleaned = 0.00357368 Jy
! Component: 2500  -  total flux cleaned = 0.00371316 Jy
! Component: 2550  -  total flux cleaned = 0.00376511 Jy
! Component: 2600  -  total flux cleaned = 0.00381666 Jy
! Component: 2650  -  total flux cleaned = 0.00391901 Jy
! Component: 2700  -  total flux cleaned = 0.00403735 Jy
! Component: 2750  -  total flux cleaned = 0.00410472 Jy
! Component: 2800  -  total flux cleaned = 0.00415492 Jy
! Component: 2850  -  total flux cleaned = 0.00428746 Jy
! Component: 2900  -  total flux cleaned = 0.00435335 Jy
! Component: 2950  -  total flux cleaned = 0.00440244 Jy
! Component: 3000  -  total flux cleaned = 0.00450008 Jy
! Component: 3050  -  total flux cleaned = 0.00459685 Jy
! Component: 3100  -  total flux cleaned = 0.00459684 Jy
! Component: 3150  -  total flux cleaned = 0.00464463 Jy
! Component: 3200  -  total flux cleaned = 0.00472394 Jy
! Component: 3250  -  total flux cleaned = 0.00477105 Jy
! Component: 3300  -  total flux cleaned = 0.00481785 Jy
! Component: 3350  -  total flux cleaned = 0.00487999 Jy
! Component: 3400  -  total flux cleaned = 0.00492619 Jy
! Component: 3450  -  total flux cleaned = 0.00498776 Jy
! Component: 3500  -  total flux cleaned = 0.005049 Jy
! Component: 3550  -  total flux cleaned = 0.00512496 Jy
! Component: 3600  -  total flux cleaned = 0.00518549 Jy
! Component: 3650  -  total flux cleaned = 0.00524559 Jy
! Component: 3700  -  total flux cleaned = 0.00527551 Jy
! Component: 3750  -  total flux cleaned = 0.00533508 Jy
! Component: 3800  -  total flux cleaned = 0.00540899 Jy
! Component: 3850  -  total flux cleaned = 0.00548254 Jy
! Component: 3900  -  total flux cleaned = 0.00551192 Jy
! Component: 3950  -  total flux cleaned = 0.00549734 Jy
! Component: 4000  -  total flux cleaned = 0.00557001 Jy
! Component: 4050  -  total flux cleaned = 0.00559908 Jy
! Total flux subtracted in 4096 components = 0.00567133 Jy
! Clean residual min=-0.000780 max=0.000846 Jy/beam
! Clean residual mean=0.000003 rms=0.000274 Jy/beam
! Combined flux in latest and established models = 0.20118 Jy
keep
! Adding 328 model components to the UV plane model.
! The established model now contains 427 components and 0.20118 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J2042+7508_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.11 x 10.41 at 3.738 degrees (North through East)
! Clean map  min=-0.0017698  max=0.16362 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J2042+7508_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.163625 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000267539 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.490524 0.490524 0.981048 1.9621 3.92419 7.84839 15.6968 31.3935 62.7871
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0008 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.163 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J2042+7508_S_uvs.log closed on Sat Oct  5 19:01:08 2013