! Started logfile: /g0/scr/pima/npcsb_uvs/J2007+7942_S_uvs.log on Sat Oct  5 19:00:59 2013
obs /g0/scr/pima/npcsb_uvs/J2007+7942_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J2007+7942_S_uva.fits
! AN table 1: 45 integrations on 15 of 15 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J2007+7942
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 2700 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J2007+7942_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.004522Jy  sigma=0.811632
! Fit after  self-cal, rms=0.945930Jy  sigma=0.720816
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.95 mas, bmaj=21.39 mas, bpa=45.94 degrees
! Estimated noise=40.7057 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.05884 Jy
! Component: 100  -  total flux cleaned = 0.0757178 Jy
! Total flux subtracted in 100 components = 0.0757178 Jy
! Clean residual min=-0.008203 max=0.008440 Jy/beam
! Clean residual mean=0.000095 rms=0.003102 Jy/beam
! Combined flux in latest and established models = 0.0757178 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.0757178 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081141Jy  sigma=0.074305
! Fit after  self-cal, rms=0.079637Jy  sigma=0.073486
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.406 mas, bmaj=22.74 mas, bpa=40.15 degrees
! Estimated noise=19.1063 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00956524 Jy
! Component: 100  -  total flux cleaned = 0.00959646 Jy
! Component: 150  -  total flux cleaned = 0.00957412 Jy
! Component: 200  -  total flux cleaned = 0.0104749 Jy
! Total flux subtracted in 200 components = 0.0104749 Jy
! Clean residual min=-0.003404 max=0.003349 Jy/beam
! Clean residual mean=0.000061 rms=0.001419 Jy/beam
! Combined flux in latest and established models = 0.0861927 Jy
! Performing phase self-cal
! Adding 80 model components to the UV plane model.
! The established model now contains 107 components and 0.0861927 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081374Jy  sigma=0.068203
! Fit after  self-cal, rms=0.081051Jy  sigma=0.068065
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.86     FD        0.81     KP        0.99     LA        0.99     
!   OV        0.87     PT        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        0.87     KP        0.85     LA        0.95     
!   OV        0.90     PT        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.94     KP        0.92     LA        0.81     
!   OV        1.10     PT        0.85     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        0.90     KP        0.80     LA        0.66     
!   OV        0.79     PT        0.84     
! 
! 
! Fit before self-cal, rms=0.081051Jy  sigma=0.068065
! Fit after  self-cal, rms=0.069183Jy  sigma=0.062934
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.462 mas, bmaj=22.76 mas, bpa=39.83 degrees
! Estimated noise=14.807 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0131625 Jy
! Component: 100  -  total flux cleaned = -0.0127415 Jy
! Component: 150  -  total flux cleaned = -0.0124382 Jy
! Component: 200  -  total flux cleaned = -0.0119719 Jy
! Total flux subtracted in 200 components = -0.0119719 Jy
! Clean residual min=-0.001194 max=0.001187 Jy/beam
! Clean residual mean=-0.000001 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.0742209 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 149 components and 0.0742209 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062363Jy  sigma=0.064764
! Fit after  self-cal, rms=0.062288Jy  sigma=0.064574
! Inverting map 
! Added new window around map position (-10, -109).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00204167 Jy
! Component: 100  -  total flux cleaned = 0.00263487 Jy
! Component: 150  -  total flux cleaned = 0.00286876 Jy
! Component: 200  -  total flux cleaned = 0.00290496 Jy
! Total flux subtracted in 200 components = 0.00290496 Jy
! Clean residual min=-0.001589 max=0.001558 Jy/beam
! Clean residual mean=0.000005 rms=0.000494 Jy/beam
! Combined flux in latest and established models = 0.0771258 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 186 components and 0.0771258 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062058Jy  sigma=0.064618
! Fit after  self-cal, rms=0.062042Jy  sigma=0.064585
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062042Jy  sigma=0.064585
! Fit after  self-cal, rms=0.055813Jy  sigma=0.062279
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.415 mas, bmaj=22.68 mas, bpa=39.92 degrees
! Estimated noise=12.0466 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00477168 Jy
! Component: 100  -  total flux cleaned = -0.00493485 Jy
! Component: 150  -  total flux cleaned = -0.00441972 Jy
! Component: 200  -  total flux cleaned = -0.00359696 Jy
! Total flux subtracted in 200 components = -0.00359696 Jy
! Clean residual min=-0.009205 max=0.003237 Jy/beam
! Clean residual mean=-0.000032 rms=0.001660 Jy/beam
! Combined flux in latest and established models = 0.0735288 Jy
selfcal
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 229 components and 0.0735289 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054105Jy  sigma=0.062730
! Fit after  self-cal, rms=0.054061Jy  sigma=0.062572
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00202081 Jy
! Component: 100  -  total flux cleaned = -0.0010285 Jy
! Component: 150  -  total flux cleaned = -1.00003e-05 Jy
! Component: 200  -  total flux cleaned = 0.00089859 Jy
! Total flux subtracted in 200 components = 0.00089859 Jy
! Clean residual min=-0.007423 max=0.003084 Jy/beam
! Clean residual mean=-0.000030 rms=0.001408 Jy/beam
! Combined flux in latest and established models = 0.0744274 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 260 components and 0.0744274 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053336Jy  sigma=0.062885
! Fit after  self-cal, rms=0.053316Jy  sigma=0.062826
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053316Jy  sigma=0.062826
! Fit after  self-cal, rms=0.051297Jy  sigma=0.062214
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.369 mas, bmaj=22.44 mas, bpa=39.79 degrees
! Estimated noise=11.0527 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00399056 Jy
! Component: 100  -  total flux cleaned = -0.00432815 Jy
! Component: 150  -  total flux cleaned = -0.00424904 Jy
! Component: 200  -  total flux cleaned = -0.00379426 Jy
! Total flux subtracted in 200 components = -0.00379426 Jy
! Clean residual min=-0.008782 max=0.003356 Jy/beam
! Clean residual mean=-0.000028 rms=0.001616 Jy/beam
! Combined flux in latest and established models = 0.0706332 Jy
selfcal
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 288 components and 0.0706332 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050142Jy  sigma=0.062628
! Fit after  self-cal, rms=0.050115Jy  sigma=0.062539
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00120136 Jy
! Component: 100  -  total flux cleaned = -0.000725866 Jy
! Component: 150  -  total flux cleaned = -0.000103305 Jy
! Component: 200  -  total flux cleaned = 0.000418653 Jy
! Total flux subtracted in 200 components = 0.000418653 Jy
! Clean residual min=-0.007581 max=0.003380 Jy/beam
! Clean residual mean=-0.000028 rms=0.001464 Jy/beam
! Combined flux in latest and established models = 0.0710518 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 306 components and 0.0710518 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049620Jy  sigma=0.062770
! Fit after  self-cal, rms=0.049602Jy  sigma=0.062739
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049602Jy  sigma=0.062739
! Fit after  self-cal, rms=0.048201Jy  sigma=0.062261
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.36 mas, bmaj=22.41 mas, bpa=37.57 degrees
! Estimated noise=10.4302 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00300617 Jy
! Component: 100  -  total flux cleaned = -0.00313124 Jy
! Component: 150  -  total flux cleaned = -0.00275726 Jy
! Component: 200  -  total flux cleaned = -0.00255208 Jy
! Total flux subtracted in 200 components = -0.00255208 Jy
! Clean residual min=-0.008584 max=0.003858 Jy/beam
! Clean residual mean=-0.000027 rms=0.001689 Jy/beam
! Combined flux in latest and established models = 0.0684997 Jy
selfcal
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 331 components and 0.0684997 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047389Jy  sigma=0.062623
! Fit after  self-cal, rms=0.047369Jy  sigma=0.062562
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00070601 Jy
! Component: 100  -  total flux cleaned = -0.000402699 Jy
! Component: 150  -  total flux cleaned = -0.000237196 Jy
! Component: 200  -  total flux cleaned = -2.92585e-05 Jy
! Total flux subtracted in 200 components = -2.92585e-05 Jy
! Clean residual min=-0.007661 max=0.003775 Jy/beam
! Clean residual mean=-0.000029 rms=0.001574 Jy/beam
! Combined flux in latest and established models = 0.0684705 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 346 components and 0.0684705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046989Jy  sigma=0.062764
! Fit after  self-cal, rms=0.046965Jy  sigma=0.062745
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=9.327 mas, bmaj=22.2 mas, bpa=39.59 degrees
! Estimated noise=10.2811 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.327 x 22.2 at 39.59 degrees (North through East)
! Clean map  min=-0.014469  max=0.050704 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.016 mas, bmaj=20.54 mas, bpa=45.65 degrees
! Estimated noise=21.7645 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00738534 Jy
! Component: 100  -  total flux cleaned = 0.00135677 Jy
! Component: 150  -  total flux cleaned = -0.00267431 Jy
! Component: 200  -  total flux cleaned = -0.00613982 Jy
! Total flux subtracted in 200 components = -0.00613982 Jy
! Clean residual min=-0.009780 max=0.025606 Jy/beam
! Clean residual mean=0.000110 rms=0.004818 Jy/beam
! Combined flux in latest and established models = -0.00613982 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 52 model components to the UV plane model.
! The established model now contains 52 components and -0.00613982 Jy
! Inverting map and beam 
! Estimated beam: bmin=9.327 mas, bmaj=22.2 mas, bpa=39.59 degrees
! Estimated noise=10.2811 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, -0.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0242755 Jy
! Component: 100  -  total flux cleaned = 0.0268209 Jy
! Component: 150  -  total flux cleaned = 0.0298627 Jy
! Component: 200  -  total flux cleaned = 0.0331591 Jy
! Total flux subtracted in 200 components = 0.0331591 Jy
! Clean residual min=-0.011046 max=0.006932 Jy/beam
! Clean residual mean=0.000059 rms=0.002601 Jy/beam
! Combined flux in latest and established models = 0.0270193 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 110 components and 0.0270193 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.36 mas, bmaj=22.41 mas, bpa=37.57 degrees
! Estimated noise=10.4302 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00472312 Jy
! Component: 100  -  total flux cleaned = 0.00836145 Jy
! Component: 150  -  total flux cleaned = 0.0114964 Jy
! Component: 200  -  total flux cleaned = 0.0137202 Jy
! Total flux subtracted in 200 components = 0.0137202 Jy
! Clean residual min=-0.008896 max=0.004248 Jy/beam
! Clean residual mean=0.000043 rms=0.001937 Jy/beam
! Combined flux in latest and established models = 0.0407395 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00196146 Jy
! Component: 100  -  total flux cleaned = 0.00317394 Jy
! Component: 150  -  total flux cleaned = 0.0041535 Jy
! Component: 200  -  total flux cleaned = 0.0051431 Jy
! Total flux subtracted in 200 components = 0.0051431 Jy
! Clean residual min=-0.007093 max=0.003438 Jy/beam
! Clean residual mean=0.000031 rms=0.001519 Jy/beam
! Combined flux in latest and established models = 0.0458826 Jy
! Adding 156 model components to the UV plane model.
! The established model now contains 256 components and 0.0458826 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=9.327 mas, bmaj=22.2 mas, bpa=39.59 degrees
! Estimated noise=10.2811 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000430147 Jy
! Component: 100  -  total flux cleaned = -0.000158159 Jy
! Component: 150  -  total flux cleaned = 0.000260738 Jy
! Component: 200  -  total flux cleaned = 0.000807651 Jy
! Total flux subtracted in 200 components = 0.000807651 Jy
! Clean residual min=-0.005439 max=0.003392 Jy/beam
! Clean residual mean=0.000022 rms=0.001210 Jy/beam
! Combined flux in latest and established models = 0.0466902 Jy
selfcal
! Performing phase self-cal
! Adding 59 model components to the UV plane model.
! The established model now contains 308 components and 0.0466902 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.043592Jy  sigma=0.067109
! Fit after  self-cal, rms=0.043323Jy  sigma=0.066066
wmodel /g0/scr/pima/npcsb_uvs/J2007+7942_S_map.mod
! Writing 308 model components to file: /g0/scr/pima/npcsb_uvs/J2007+7942_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J2007+7942_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J2007+7942_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J2007+7942_S_map.win
! wwins: Wrote 2 windows to /g0/scr/pima/npcsb_uvs/J2007+7942_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00115087 Jy
! Component: 100  -  total flux cleaned = -0.00191694 Jy
! Component: 150  -  total flux cleaned = -0.00220978 Jy
! Component: 200  -  total flux cleaned = -0.00244657 Jy
! Component: 250  -  total flux cleaned = -0.00247303 Jy
! Component: 300  -  total flux cleaned = -0.00244691 Jy
! Component: 350  -  total flux cleaned = -0.00244739 Jy
! Component: 400  -  total flux cleaned = -0.00251595 Jy
! Component: 450  -  total flux cleaned = -0.00253687 Jy
! Component: 500  -  total flux cleaned = -0.00261996 Jy
! Component: 550  -  total flux cleaned = -0.0026993 Jy
! Component: 600  -  total flux cleaned = -0.0027754 Jy
! Component: 650  -  total flux cleaned = -0.00284785 Jy
! Component: 700  -  total flux cleaned = -0.00295266 Jy
! Component: 750  -  total flux cleaned = -0.00310548 Jy
! Component: 800  -  total flux cleaned = -0.00322032 Jy
! Component: 850  -  total flux cleaned = -0.00329987 Jy
! Component: 900  -  total flux cleaned = -0.00340861 Jy
! Component: 950  -  total flux cleaned = -0.00349928 Jy
! Component: 1000  -  total flux cleaned = -0.00357257 Jy
! Component: 1050  -  total flux cleaned = -0.00362948 Jy
! Component: 1100  -  total flux cleaned = -0.00374068 Jy
! Component: 1150  -  total flux cleaned = -0.00386302 Jy
! Component: 1200  -  total flux cleaned = -0.00398313 Jy
! Component: 1250  -  total flux cleaned = -0.00408805 Jy
! Component: 1300  -  total flux cleaned = -0.00419111 Jy
! Component: 1350  -  total flux cleaned = -0.00425443 Jy
! Component: 1400  -  total flux cleaned = -0.00431676 Jy
! Component: 1450  -  total flux cleaned = -0.00435372 Jy
! Component: 1500  -  total flux cleaned = -0.00440229 Jy
! Component: 1550  -  total flux cleaned = -0.00446205 Jy
! Component: 1600  -  total flux cleaned = -0.0045207 Jy
! Component: 1650  -  total flux cleaned = -0.00457875 Jy
! Component: 1700  -  total flux cleaned = -0.00464783 Jy
! Component: 1750  -  total flux cleaned = -0.00472765 Jy
! Component: 1800  -  total flux cleaned = -0.0048409 Jy
! Component: 1850  -  total flux cleaned = -0.00493091 Jy
! Component: 1900  -  total flux cleaned = -0.00499804 Jy
! Component: 1950  -  total flux cleaned = -0.00508725 Jy
! Component: 2000  -  total flux cleaned = -0.00512059 Jy
! Component: 2050  -  total flux cleaned = -0.00518698 Jy
! Component: 2100  -  total flux cleaned = -0.005231 Jy
! Component: 2150  -  total flux cleaned = -0.005275 Jy
! Component: 2200  -  total flux cleaned = -0.00530802 Jy
! Component: 2250  -  total flux cleaned = -0.00534098 Jy
! Component: 2300  -  total flux cleaned = -0.00538481 Jy
! Component: 2350  -  total flux cleaned = -0.00545064 Jy
! Component: 2400  -  total flux cleaned = -0.00549452 Jy
! Component: 2450  -  total flux cleaned = -0.00553845 Jy
! Component: 2500  -  total flux cleaned = -0.00558231 Jy
! Component: 2550  -  total flux cleaned = -0.00562624 Jy
! Component: 2600  -  total flux cleaned = -0.00561528 Jy
! Component: 2650  -  total flux cleaned = -0.00563731 Jy
! Component: 2700  -  total flux cleaned = -0.00565939 Jy
! Component: 2750  -  total flux cleaned = -0.00567046 Jy
! Component: 2800  -  total flux cleaned = -0.00572578 Jy
! Component: 2850  -  total flux cleaned = -0.0057592 Jy
! Component: 2900  -  total flux cleaned = -0.00580379 Jy
! Component: 2950  -  total flux cleaned = -0.00584863 Jy
! Component: 3000  -  total flux cleaned = -0.00590487 Jy
! Component: 3050  -  total flux cleaned = -0.00593877 Jy
! Component: 3100  -  total flux cleaned = -0.00598404 Jy
! Component: 3150  -  total flux cleaned = -0.0060182 Jy
! Component: 3200  -  total flux cleaned = -0.00606402 Jy
! Component: 3250  -  total flux cleaned = -0.00612168 Jy
! Component: 3300  -  total flux cleaned = -0.00613339 Jy
! Component: 3350  -  total flux cleaned = -0.00617982 Jy
! Component: 3400  -  total flux cleaned = -0.00622656 Jy
! Component: 3450  -  total flux cleaned = -0.00628547 Jy
! Component: 3500  -  total flux cleaned = -0.00632089 Jy
! Component: 3550  -  total flux cleaned = -0.00638048 Jy
! Component: 3600  -  total flux cleaned = -0.00640441 Jy
! Component: 3650  -  total flux cleaned = -0.00646473 Jy
! Component: 3700  -  total flux cleaned = -0.00648903 Jy
! Component: 3750  -  total flux cleaned = -0.0065257 Jy
! Component: 3800  -  total flux cleaned = -0.00653804 Jy
! Component: 3850  -  total flux cleaned = -0.00657502 Jy
! Component: 3900  -  total flux cleaned = -0.00662481 Jy
! Component: 3950  -  total flux cleaned = -0.00666246 Jy
! Component: 4000  -  total flux cleaned = -0.00668764 Jy
! Component: 4050  -  total flux cleaned = -0.00672584 Jy
! Total flux subtracted in 4096 components = -0.00675143 Jy
! Clean residual min=-0.000816 max=0.000662 Jy/beam
! Clean residual mean=-0.000002 rms=0.000245 Jy/beam
! Combined flux in latest and established models = 0.0399388 Jy
keep
! Adding 389 model components to the UV plane model.
! The established model now contains 697 components and 0.0399388 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J2007+7942_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.327 x 22.2 at 39.59 degrees (North through East)
! Clean map  min=-0.005979  max=0.042885 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J2007+7942_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0428854 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000236376 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.65354 1.65354 3.30708 6.61417 13.2283 26.4567 52.9133
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0007 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.042 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J2007+7942_S_uvs.log closed on Sat Oct  5 19:01:04 2013