! Started logfile: /g0/scr/pima/npcsb_uvs/J1909+7813_X_uvs.log on Sat Oct  5 18:54:50 2013
obs /g0/scr/pima/npcsb_uvs/J1909+7813_X_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1909+7813_X_uva.fits
! AN table 1: 46 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.7 visibilities/baseline/integration-bin.
! Found source: J1909+7813
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1288 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1909+7813_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.010662Jy  sigma=0.835991
! Fit after  self-cal, rms=0.941282Jy  sigma=0.741971
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.784 mas, bmaj=9.51 mas, bpa=5.189 degrees
! Estimated noise=55.2893 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0662732 Jy
! Component: 100  -  total flux cleaned = 0.075713 Jy
! Total flux subtracted in 100 components = 0.075713 Jy
! Clean residual min=-0.006456 max=0.006478 Jy/beam
! Clean residual mean=-0.000016 rms=0.002628 Jy/beam
! Combined flux in latest and established models = 0.0757129 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.0757129 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067792Jy  sigma=0.057183
! Fit after  self-cal, rms=0.066723Jy  sigma=0.056628
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.904 mas, bmaj=10.28 mas, bpa=-0.7413 degrees
! Estimated noise=28.9255 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00798439 Jy
! Component: 100  -  total flux cleaned = 0.00977856 Jy
! Component: 150  -  total flux cleaned = 0.0114838 Jy
! Component: 200  -  total flux cleaned = 0.0125253 Jy
! Total flux subtracted in 200 components = 0.0125253 Jy
! Clean residual min=-0.002321 max=0.002375 Jy/beam
! Clean residual mean=-0.000016 rms=0.001004 Jy/beam
! Combined flux in latest and established models = 0.0882382 Jy
! Performing phase self-cal
! Adding 69 model components to the UV plane model.
! The established model now contains 83 components and 0.0882382 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067145Jy  sigma=0.054249
! Fit after  self-cal, rms=0.066913Jy  sigma=0.054112
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.79     KP        0.98     LA        1.00     OV        1.00*    
!   PT        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     KP        0.91     LA        0.83     OV        1.00*    
!   PT        0.88     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.91     KP        0.78     LA        0.98     OV        1.00*    
!   PT        0.83     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.82     KP        0.99     LA        0.77     OV        1.00*    
!   PT        1.08     
! 
! 
! Fit before self-cal, rms=0.066913Jy  sigma=0.054112
! Fit after  self-cal, rms=0.061280Jy  sigma=0.050067
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.882 mas, bmaj=10.21 mas, bpa=-0.4839 degrees
! Estimated noise=23.3444 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0119174 Jy
! Component: 100  -  total flux cleaned = -0.014238 Jy
! Component: 150  -  total flux cleaned = -0.0147627 Jy
! Component: 200  -  total flux cleaned = -0.0150805 Jy
! Total flux subtracted in 200 components = -0.0150805 Jy
! Clean residual min=-0.001032 max=0.001026 Jy/beam
! Clean residual mean=-0.000001 rms=0.000332 Jy/beam
! Combined flux in latest and established models = 0.0731577 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 121 components and 0.0731577 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054550Jy  sigma=0.052334
! Fit after  self-cal, rms=0.054728Jy  sigma=0.052224
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054728Jy  sigma=0.052224
! Fit after  self-cal, rms=0.050555Jy  sigma=0.049868
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.855 mas, bmaj=10.19 mas, bpa=0.5395 degrees
! Estimated noise=19.1981 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00971973 Jy
! Component: 100  -  total flux cleaned = -0.0120328 Jy
! Component: 150  -  total flux cleaned = -0.013031 Jy
! Component: 200  -  total flux cleaned = -0.0132159 Jy
! Total flux subtracted in 200 components = -0.0132159 Jy
! Clean residual min=-0.000766 max=0.000740 Jy/beam
! Clean residual mean=-0.000002 rms=0.000256 Jy/beam
! Combined flux in latest and established models = 0.0599418 Jy
selfcal
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 157 components and 0.0599418 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.045183Jy  sigma=0.052126
! Fit after  self-cal, rms=0.045202Jy  sigma=0.052109
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000253338 Jy
! Component: 100  -  total flux cleaned = -0.000346228 Jy
! Component: 150  -  total flux cleaned = -0.000426123 Jy
! Component: 200  -  total flux cleaned = -0.000476989 Jy
! Total flux subtracted in 200 components = -0.000476989 Jy
! Clean residual min=-0.000415 max=0.000417 Jy/beam
! Clean residual mean=0.000001 rms=0.000121 Jy/beam
! Combined flux in latest and established models = 0.0594648 Jy
! Performing phase self-cal
! Adding 73 model components to the UV plane model.
! The established model now contains 223 components and 0.0594648 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.045028Jy  sigma=0.052248
! Fit after  self-cal, rms=0.045006Jy  sigma=0.052230
! Inverting map 
! Added new window around map position (46.6, -16.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000302779 Jy
! Component: 100  -  total flux cleaned = 0.000574086 Jy
! Component: 150  -  total flux cleaned = 0.000764983 Jy
! Component: 200  -  total flux cleaned = 0.000860842 Jy
! Total flux subtracted in 200 components = 0.000860842 Jy
! Clean residual min=-0.000518 max=0.000603 Jy/beam
! Clean residual mean=0.000001 rms=0.000158 Jy/beam
! Combined flux in latest and established models = 0.0603256 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 272 components and 0.0603256 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.044981Jy  sigma=0.052240
! Fit after  self-cal, rms=0.044958Jy  sigma=0.052232
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.044958Jy  sigma=0.052232
! Fit after  self-cal, rms=0.041243Jy  sigma=0.049803
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.817 mas, bmaj=10.16 mas, bpa=1.57 degrees
! Estimated noise=15.7645 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0068522 Jy
! Component: 100  -  total flux cleaned = -0.00807265 Jy
! Component: 150  -  total flux cleaned = -0.00787803 Jy
! Component: 200  -  total flux cleaned = -0.00770564 Jy
! Total flux subtracted in 200 components = -0.00770564 Jy
! Clean residual min=-0.003399 max=0.003036 Jy/beam
! Clean residual mean=0.000003 rms=0.000832 Jy/beam
! Combined flux in latest and established models = 0.05262 Jy
selfcal
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 312 components and 0.05262 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.037925Jy  sigma=0.051653
! Fit after  self-cal, rms=0.037812Jy  sigma=0.051330
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00142841 Jy
! Component: 100  -  total flux cleaned = -0.00158512 Jy
! Component: 150  -  total flux cleaned = -0.00146084 Jy
! Component: 200  -  total flux cleaned = -0.00141944 Jy
! Total flux subtracted in 200 components = -0.00141944 Jy
! Clean residual min=-0.001351 max=0.001089 Jy/beam
! Clean residual mean=-0.000000 rms=0.000387 Jy/beam
! Combined flux in latest and established models = 0.0512006 Jy
! Performing phase self-cal
! Adding 57 model components to the UV plane model.
! The established model now contains 367 components and 0.0512006 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.037324Jy  sigma=0.051891
! Fit after  self-cal, rms=0.037302Jy  sigma=0.051866
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.037302Jy  sigma=0.051866
! Fit after  self-cal, rms=0.034732Jy  sigma=0.049883
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.905 mas, bmaj=10.14 mas, bpa=2.158 degrees
! Estimated noise=13.2323 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00537248 Jy
! Component: 100  -  total flux cleaned = -0.00634066 Jy
! Component: 150  -  total flux cleaned = -0.00618916 Jy
! Component: 200  -  total flux cleaned = -0.00588169 Jy
! Total flux subtracted in 200 components = -0.00588169 Jy
! Clean residual min=-0.003138 max=0.002659 Jy/beam
! Clean residual mean=0.000003 rms=0.000793 Jy/beam
! Combined flux in latest and established models = 0.0453189 Jy
selfcal
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 400 components and 0.0453189 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.032294Jy  sigma=0.051528
! Fit after  self-cal, rms=0.032189Jy  sigma=0.051191
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00121743 Jy
! Component: 100  -  total flux cleaned = -0.00121787 Jy
! Component: 150  -  total flux cleaned = -0.00138725 Jy
! Component: 200  -  total flux cleaned = -0.0014357 Jy
! Total flux subtracted in 200 components = -0.0014357 Jy
! Clean residual min=-0.001505 max=0.001279 Jy/beam
! Clean residual mean=-0.000001 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.0438832 Jy
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 443 components and 0.0438832 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.031732Jy  sigma=0.051778
! Fit after  self-cal, rms=0.031707Jy  sigma=0.051740
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.822 mas, bmaj=10.15 mas, bpa=2.173 degrees
! Estimated noise=13.2364 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.822 x 10.15 at 2.173 degrees (North through East)
! Clean map  min=-0.018184  max=0.04878 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.723 mas, bmaj=9.449 mas, bpa=8.881 degrees
! Estimated noise=24.7825 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0205102 Jy
! Component: 100  -  total flux cleaned = 0.0198597 Jy
! Component: 150  -  total flux cleaned = 0.0232787 Jy
! Component: 200  -  total flux cleaned = 0.0256735 Jy
! Total flux subtracted in 200 components = 0.0256735 Jy
! Clean residual min=-0.013196 max=0.018458 Jy/beam
! Clean residual mean=-0.000020 rms=0.004050 Jy/beam
! Combined flux in latest and established models = 0.0256735 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.0256735 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.822 mas, bmaj=10.15 mas, bpa=2.173 degrees
! Estimated noise=13.2364 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-48, 7.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0120691 Jy
! Component: 100  -  total flux cleaned = 0.012023 Jy
! Component: 150  -  total flux cleaned = 0.010841 Jy
! Component: 200  -  total flux cleaned = 0.00917055 Jy
! Total flux subtracted in 200 components = 0.00917055 Jy
! Clean residual min=-0.007758 max=0.007359 Jy/beam
! Clean residual mean=-0.000007 rms=0.001782 Jy/beam
! Combined flux in latest and established models = 0.034844 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 46 components and 0.034844 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.905 mas, bmaj=10.14 mas, bpa=2.158 degrees
! Estimated noise=13.2323 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00163817 Jy
! Component: 100  -  total flux cleaned = -0.00286729 Jy
! Component: 150  -  total flux cleaned = -0.00330016 Jy
! Component: 200  -  total flux cleaned = -0.00358123 Jy
! Total flux subtracted in 200 components = -0.00358123 Jy
! Clean residual min=-0.002492 max=0.003875 Jy/beam
! Clean residual mean=-0.000007 rms=0.000935 Jy/beam
! Combined flux in latest and established models = 0.0312628 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000350574 Jy
! Component: 100  -  total flux cleaned = -0.000679326 Jy
! Component: 150  -  total flux cleaned = -0.000151106 Jy
! Component: 200  -  total flux cleaned = 0.000138802 Jy
! Total flux subtracted in 200 components = 0.000138802 Jy
! Clean residual min=-0.002355 max=0.003791 Jy/beam
! Clean residual mean=-0.000004 rms=0.000738 Jy/beam
! Combined flux in latest and established models = 0.0314016 Jy
! Adding 124 model components to the UV plane model.
! The established model now contains 166 components and 0.0314016 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.822 mas, bmaj=10.15 mas, bpa=2.173 degrees
! Estimated noise=13.2364 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00106149 Jy
! Component: 100  -  total flux cleaned = 0.00137071 Jy
! Component: 150  -  total flux cleaned = 0.00142418 Jy
! Component: 200  -  total flux cleaned = 0.00132725 Jy
! Total flux subtracted in 200 components = 0.00132725 Jy
! Clean residual min=-0.001740 max=0.001587 Jy/beam
! Clean residual mean=-0.000004 rms=0.000491 Jy/beam
! Combined flux in latest and established models = 0.0327289 Jy
selfcal
! Performing phase self-cal
! Adding 57 model components to the UV plane model.
! The established model now contains 217 components and 0.0327289 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.031513Jy  sigma=0.053172
! Fit after  self-cal, rms=0.031259Jy  sigma=0.052730
wmodel /g0/scr/pima/npcsb_uvs/J1909+7813_X_map.mod
! Writing 217 model components to file: /g0/scr/pima/npcsb_uvs/J1909+7813_X_map.mod
wobs /g0/scr/pima/npcsb_uvs/J1909+7813_X_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1909+7813_X_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J1909+7813_X_map.win
! wwins: Wrote 2 windows to /g0/scr/pima/npcsb_uvs/J1909+7813_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000208747 Jy
! Component: 100  -  total flux cleaned = 0.000482863 Jy
! Component: 150  -  total flux cleaned = 0.000713443 Jy
! Component: 200  -  total flux cleaned = 0.000914748 Jy
! Component: 250  -  total flux cleaned = 0.0011173 Jy
! Component: 300  -  total flux cleaned = 0.00120747 Jy
! Component: 350  -  total flux cleaned = 0.00123285 Jy
! Component: 400  -  total flux cleaned = 0.00127032 Jy
! Component: 450  -  total flux cleaned = 0.00129506 Jy
! Component: 500  -  total flux cleaned = 0.00131961 Jy
! Component: 550  -  total flux cleaned = 0.00136849 Jy
! Component: 600  -  total flux cleaned = 0.00138054 Jy
! Component: 650  -  total flux cleaned = 0.00139281 Jy
! Component: 700  -  total flux cleaned = 0.00141737 Jy
! Component: 750  -  total flux cleaned = 0.00144202 Jy
! Component: 800  -  total flux cleaned = 0.0014671 Jy
! Component: 850  -  total flux cleaned = 0.00149248 Jy
! Component: 900  -  total flux cleaned = 0.0015181 Jy
! Component: 950  -  total flux cleaned = 0.0015311 Jy
! Component: 1000  -  total flux cleaned = 0.00155756 Jy
! Component: 1050  -  total flux cleaned = 0.00154422 Jy
! Component: 1100  -  total flux cleaned = 0.00153021 Jy
! Component: 1150  -  total flux cleaned = 0.00153001 Jy
! Component: 1200  -  total flux cleaned = 0.00151543 Jy
! Component: 1250  -  total flux cleaned = 0.00150044 Jy
! Component: 1300  -  total flux cleaned = 0.00150032 Jy
! Component: 1350  -  total flux cleaned = 0.00148453 Jy
! Component: 1400  -  total flux cleaned = 0.00146828 Jy
! Component: 1450  -  total flux cleaned = 0.00146775 Jy
! Component: 1500  -  total flux cleaned = 0.00148377 Jy
! Component: 1550  -  total flux cleaned = 0.00148347 Jy
! Component: 1600  -  total flux cleaned = 0.00148337 Jy
! Component: 1650  -  total flux cleaned = 0.0014834 Jy
! Component: 1700  -  total flux cleaned = 0.00142807 Jy
! Component: 1750  -  total flux cleaned = 0.00138993 Jy
! Component: 1800  -  total flux cleaned = 0.00135077 Jy
! Component: 1850  -  total flux cleaned = 0.00128958 Jy
! Component: 1900  -  total flux cleaned = 0.00124724 Jy
! Component: 1950  -  total flux cleaned = 0.00118204 Jy
! Component: 2000  -  total flux cleaned = 0.00113693 Jy
! Component: 2050  -  total flux cleaned = 0.00109086 Jy
! Component: 2100  -  total flux cleaned = 0.00101948 Jy
! Component: 2150  -  total flux cleaned = 0.000945245 Jy
! Component: 2200  -  total flux cleaned = 0.000894068 Jy
! Component: 2250  -  total flux cleaned = 0.000814806 Jy
! Component: 2300  -  total flux cleaned = 0.000759763 Jy
! Component: 2350  -  total flux cleaned = 0.000702847 Jy
! Component: 2400  -  total flux cleaned = 0.000644459 Jy
! Component: 2450  -  total flux cleaned = 0.000553193 Jy
! Component: 2500  -  total flux cleaned = 0.000490122 Jy
! Component: 2550  -  total flux cleaned = 0.000425521 Jy
! Component: 2600  -  total flux cleaned = 0.000324735 Jy
! Component: 2650  -  total flux cleaned = 0.00025471 Jy
! Component: 2700  -  total flux cleaned = 0.000182321 Jy
! Component: 2750  -  total flux cleaned = 0.000107743 Jy
! Component: 2800  -  total flux cleaned = 3.05932e-05 Jy
! Component: 2850  -  total flux cleaned = -4.89228e-05 Jy
! Component: 2900  -  total flux cleaned = -0.00013125 Jy
! Component: 2950  -  total flux cleaned = -0.000259737 Jy
! Component: 3000  -  total flux cleaned = -0.000349111 Jy
! Component: 3050  -  total flux cleaned = -0.000441746 Jy
! Component: 3100  -  total flux cleaned = -0.000537403 Jy
! Component: 3150  -  total flux cleaned = -0.000635961 Jy
! Component: 3200  -  total flux cleaned = -0.000738214 Jy
! Component: 3250  -  total flux cleaned = -0.000844225 Jy
! Component: 3300  -  total flux cleaned = -0.00095201 Jy
! Component: 3350  -  total flux cleaned = -0.00112078 Jy
! Component: 3400  -  total flux cleaned = -0.0012966 Jy
! Component: 3450  -  total flux cleaned = -0.00141739 Jy
! Component: 3500  -  total flux cleaned = -0.00160633 Jy
! Component: 3550  -  total flux cleaned = -0.00173635 Jy
! Component: 3600  -  total flux cleaned = -0.00193943 Jy
! Component: 3650  -  total flux cleaned = -0.00214962 Jy
! Component: 3700  -  total flux cleaned = -0.00229558 Jy
! Component: 3750  -  total flux cleaned = -0.00244688 Jy
! Component: 3800  -  total flux cleaned = -0.0026812 Jy
! Component: 3850  -  total flux cleaned = -0.00284229 Jy
! Component: 3900  -  total flux cleaned = -0.00309283 Jy
! Component: 3950  -  total flux cleaned = -0.00335263 Jy
! Component: 4000  -  total flux cleaned = -0.0035325 Jy
! Component: 4050  -  total flux cleaned = -0.00381036 Jy
! Total flux subtracted in 4096 components = -0.00400196 Jy
! Clean residual min=-0.005676 max=0.005363 Jy/beam
! Clean residual mean=0.000008 rms=0.001743 Jy/beam
! Combined flux in latest and established models = 0.0287269 Jy
keep
! Adding 130 model components to the UV plane model.
! The established model now contains 347 components and 0.0287269 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J1909+7813_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.822 x 10.15 at 2.173 degrees (North through East)
! Clean map  min=-0.0084431  max=0.023016 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1909+7813_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0230165 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00204844 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -26.6997 26.6997 53.3993
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0061 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.023 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J1909+7813_X_uvs.log closed on Sat Oct  5 18:54:55 2013