! Started logfile: /g0/scr/pima/npcsb_uvs/J1909+7813_S_uvs.log on Sat Oct  5 19:00:54 2013
obs /g0/scr/pima/npcsb_uvs/J1909+7813_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1909+7813_S_uva.fits
! AN table 1: 47 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.844563 visibilities/baseline/integration-bin.
! Found source: J1909+7813
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 5716 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1909+7813_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.014211Jy  sigma=1.297550
! Fit after  self-cal, rms=0.889765Jy  sigma=1.005481
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.012 mas, bmaj=9.127 mas, bpa=-0.07036 degrees
! Estimated noise=21.4462 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.103419 Jy
! Component: 100  -  total flux cleaned = 0.147258 Jy
! Total flux subtracted in 100 components = 0.147258 Jy
! Clean residual min=-0.016086 max=0.021426 Jy/beam
! Clean residual mean=-0.000055 rms=0.005456 Jy/beam
! Combined flux in latest and established models = 0.147258 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.147258 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106166Jy  sigma=0.168537
! Fit after  self-cal, rms=0.105631Jy  sigma=0.168276
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.282 mas, bmaj=10.58 mas, bpa=-0.35 degrees
! Estimated noise=8.62473 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0465989 Jy
! Component: 100  -  total flux cleaned = 0.0709611 Jy
! Component: 150  -  total flux cleaned = 0.0844058 Jy
! Component: 200  -  total flux cleaned = 0.0919293 Jy
! Total flux subtracted in 200 components = 0.0919293 Jy
! Clean residual min=-0.015479 max=0.020536 Jy/beam
! Clean residual mean=-0.000088 rms=0.005811 Jy/beam
! Combined flux in latest and established models = 0.239187 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 62 components and 0.239187 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099324Jy  sigma=0.127370
! Fit after  self-cal, rms=0.099248Jy  sigma=0.127200
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.86     FD        1.02     HN        1.05     KP        0.90     
!   LA        1.11     MK        0.86     OV        1.07     PT        0.97     
!   SC        0.69     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.03     HN        1.01     KP        0.87     
!   LA        0.99     MK        0.90     OV        1.07     PT        0.91     
!   SC        0.73     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        1.04     KP        0.96     
!   LA        0.82     MK        0.86     OV        1.06     PT        1.10     
!   SC        0.79     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.96     HN        0.85     KP        0.84     
!   LA        0.67     MK        0.83     OV        0.98     PT        0.98     
!   SC        0.88     
! 
! 
! Fit before self-cal, rms=0.099248Jy  sigma=0.127200
! Fit after  self-cal, rms=0.089853Jy  sigma=0.114011
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.153 mas, bmaj=10.61 mas, bpa=0.2889 degrees
! Estimated noise=7.51218 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.014029 Jy
! Component: 100  -  total flux cleaned = -0.0175365 Jy
! Component: 150  -  total flux cleaned = -0.0179627 Jy
! Component: 200  -  total flux cleaned = -0.0181311 Jy
! Total flux subtracted in 200 components = -0.0181311 Jy
! Clean residual min=-0.010708 max=0.017383 Jy/beam
! Clean residual mean=-0.000099 rms=0.004395 Jy/beam
! Combined flux in latest and established models = 0.221056 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 72 components and 0.221056 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083986Jy  sigma=0.116712
! Fit after  self-cal, rms=0.084098Jy  sigma=0.116554
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084098Jy  sigma=0.116554
! Fit after  self-cal, rms=0.079029Jy  sigma=0.113747
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.047 mas, bmaj=10.54 mas, bpa=0.5817 degrees
! Estimated noise=6.66752 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0119146 Jy
! Component: 100  -  total flux cleaned = -0.0156393 Jy
! Component: 150  -  total flux cleaned = -0.0171906 Jy
! Component: 200  -  total flux cleaned = -0.0172349 Jy
! Total flux subtracted in 200 components = -0.0172349 Jy
! Clean residual min=-0.009537 max=0.015194 Jy/beam
! Clean residual mean=-0.000084 rms=0.003868 Jy/beam
! Combined flux in latest and established models = 0.203821 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 78 components and 0.203821 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074307Jy  sigma=0.116419
! Fit after  self-cal, rms=0.074283Jy  sigma=0.116387
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000153571 Jy
! Component: 100  -  total flux cleaned = -0.000154792 Jy
! Component: 150  -  total flux cleaned = -0.000116196 Jy
! Component: 200  -  total flux cleaned = -7.94586e-05 Jy
! Total flux subtracted in 200 components = -7.94586e-05 Jy
! Clean residual min=-0.009472 max=0.015132 Jy/beam
! Clean residual mean=-0.000084 rms=0.003859 Jy/beam
! Combined flux in latest and established models = 0.203741 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 85 components and 0.203741 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074164Jy  sigma=0.116427
! Fit after  self-cal, rms=0.074158Jy  sigma=0.116417
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074158Jy  sigma=0.116417
! Fit after  self-cal, rms=0.070128Jy  sigma=0.113535
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.976 mas, bmaj=10.48 mas, bpa=0.765 degrees
! Estimated noise=5.94575 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0102975 Jy
! Component: 100  -  total flux cleaned = -0.0138131 Jy
! Component: 150  -  total flux cleaned = -0.0154002 Jy
! Component: 200  -  total flux cleaned = -0.0159877 Jy
! Total flux subtracted in 200 components = -0.0159877 Jy
! Clean residual min=-0.008423 max=0.013353 Jy/beam
! Clean residual mean=-0.000071 rms=0.003411 Jy/beam
! Combined flux in latest and established models = 0.187754 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 94 components and 0.187754 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066201Jy  sigma=0.116132
! Fit after  self-cal, rms=0.066201Jy  sigma=0.116108
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000265664 Jy
! Component: 100  -  total flux cleaned = -0.000233444 Jy
! Component: 150  -  total flux cleaned = -0.000233677 Jy
! Component: 200  -  total flux cleaned = -0.0002053 Jy
! Total flux subtracted in 200 components = -0.0002053 Jy
! Clean residual min=-0.008359 max=0.013286 Jy/beam
! Clean residual mean=-0.000071 rms=0.003407 Jy/beam
! Combined flux in latest and established models = 0.187548 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 95 components and 0.187548 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066108Jy  sigma=0.116171
! Fit after  self-cal, rms=0.066110Jy  sigma=0.116163
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066110Jy  sigma=0.116163
! Fit after  self-cal, rms=0.062812Jy  sigma=0.113337
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.103 mas, bmaj=13.59 mas, bpa=17.77 degrees
! Estimated noise=5.6077 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0103213 Jy
! Component: 100  -  total flux cleaned = -0.0134127 Jy
! Component: 150  -  total flux cleaned = -0.013744 Jy
! Component: 200  -  total flux cleaned = -0.0138513 Jy
! Total flux subtracted in 200 components = -0.0138513 Jy
! Clean residual min=-0.010444 max=0.018601 Jy/beam
! Clean residual mean=-0.000098 rms=0.004958 Jy/beam
! Combined flux in latest and established models = 0.173697 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 100 components and 0.173697 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059577Jy  sigma=0.115759
! Fit after  self-cal, rms=0.059532Jy  sigma=0.115603
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.42305e-05 Jy
! Component: 100  -  total flux cleaned = -2.22657e-05 Jy
! Component: 150  -  total flux cleaned = 1.87293e-05 Jy
! Component: 200  -  total flux cleaned = 2.2249e-05 Jy
! Total flux subtracted in 200 components = 2.2249e-05 Jy
! Clean residual min=-0.010342 max=0.018545 Jy/beam
! Clean residual mean=-0.000097 rms=0.004941 Jy/beam
! Combined flux in latest and established models = 0.173719 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 102 components and 0.173719 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059562Jy  sigma=0.115709
! Fit after  self-cal, rms=0.059568Jy  sigma=0.115689
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.932 mas, bmaj=10.43 mas, bpa=0.828 degrees
! Estimated noise=5.33452 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.932 x 10.43 at 0.828 degrees (North through East)
! Clean map  min=-0.0071513  max=0.097313 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.856 mas, bmaj=9.279 mas, bpa=1.409 degrees
! Estimated noise=12.1854 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0597634 Jy
! Component: 100  -  total flux cleaned = 0.0892836 Jy
! Component: 150  -  total flux cleaned = 0.106869 Jy
! Component: 200  -  total flux cleaned = 0.1192 Jy
! Total flux subtracted in 200 components = 0.1192 Jy
! Clean residual min=-0.007622 max=0.009205 Jy/beam
! Clean residual mean=-0.000024 rms=0.002312 Jy/beam
! Combined flux in latest and established models = 0.1192 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 48 model components to the UV plane model.
! The established model now contains 48 components and 0.1192 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.932 mas, bmaj=10.43 mas, bpa=0.828 degrees
! Estimated noise=5.33452 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0225013 Jy
! Component: 100  -  total flux cleaned = 0.0355217 Jy
! Component: 150  -  total flux cleaned = 0.0431347 Jy
! Component: 200  -  total flux cleaned = 0.047618 Jy
! Total flux subtracted in 200 components = 0.047618 Jy
! Clean residual min=-0.008171 max=0.011912 Jy/beam
! Clean residual mean=-0.000059 rms=0.003202 Jy/beam
! Combined flux in latest and established models = 0.166818 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 66 components and 0.166818 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.103 mas, bmaj=13.59 mas, bpa=17.77 degrees
! Estimated noise=5.6077 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0048708 Jy
! Component: 100  -  total flux cleaned = 0.00615834 Jy
! Component: 150  -  total flux cleaned = 0.00629038 Jy
! Component: 200  -  total flux cleaned = 0.00629113 Jy
! Total flux subtracted in 200 components = 0.00629113 Jy
! Clean residual min=-0.010847 max=0.018789 Jy/beam
! Clean residual mean=-0.000101 rms=0.005018 Jy/beam
! Combined flux in latest and established models = 0.17311 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.7948e-06 Jy
! Component: 100  -  total flux cleaned = 1.67663e-05 Jy
! Component: 150  -  total flux cleaned = 2.81159e-05 Jy
! Component: 200  -  total flux cleaned = 3.9732e-05 Jy
! Total flux subtracted in 200 components = 3.9732e-05 Jy
! Clean residual min=-0.010601 max=0.018683 Jy/beam
! Clean residual mean=-0.000099 rms=0.004989 Jy/beam
! Combined flux in latest and established models = 0.173149 Jy
! Adding 10 model components to the UV plane model.
! The established model now contains 70 components and 0.173149 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.932 mas, bmaj=10.43 mas, bpa=0.828 degrees
! Estimated noise=5.33452 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000738499 Jy
! Component: 100  -  total flux cleaned = -0.000830334 Jy
! Component: 150  -  total flux cleaned = -0.000893937 Jy
! Component: 200  -  total flux cleaned = -0.000943541 Jy
! Total flux subtracted in 200 components = -0.000943541 Jy
! Clean residual min=-0.007444 max=0.011833 Jy/beam
! Clean residual mean=-0.000060 rms=0.003048 Jy/beam
! Combined flux in latest and established models = 0.172206 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 77 components and 0.172206 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059607Jy  sigma=0.116193
! Fit after  self-cal, rms=0.059602Jy  sigma=0.116113
wmodel /g0/scr/pima/npcsb_uvs/J1909+7813_S_map.mod
! Writing 77 model components to file: /g0/scr/pima/npcsb_uvs/J1909+7813_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J1909+7813_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1909+7813_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J1909+7813_S_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsb_uvs/J1909+7813_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00503923 Jy
! Component: 100  -  total flux cleaned = 0.00913035 Jy
! Component: 150  -  total flux cleaned = 0.0126086 Jy
! Component: 200  -  total flux cleaned = 0.015418 Jy
! Component: 250  -  total flux cleaned = 0.0170638 Jy
! Component: 300  -  total flux cleaned = 0.0186453 Jy
! Component: 350  -  total flux cleaned = 0.019991 Jy
! Component: 400  -  total flux cleaned = 0.021141 Jy
! Component: 450  -  total flux cleaned = 0.0221927 Jy
! Component: 500  -  total flux cleaned = 0.0228195 Jy
! Component: 550  -  total flux cleaned = 0.0230165 Jy
! Component: 600  -  total flux cleaned = 0.0233815 Jy
! Component: 650  -  total flux cleaned = 0.0234401 Jy
! Component: 700  -  total flux cleaned = 0.0237174 Jy
! Component: 750  -  total flux cleaned = 0.0238746 Jy
! Component: 800  -  total flux cleaned = 0.0243245 Jy
! Component: 850  -  total flux cleaned = 0.0247061 Jy
! Component: 900  -  total flux cleaned = 0.0250277 Jy
! Component: 950  -  total flux cleaned = 0.0252491 Jy
! Component: 1000  -  total flux cleaned = 0.0253764 Jy
! Component: 1050  -  total flux cleaned = 0.0254186 Jy
! Component: 1100  -  total flux cleaned = 0.0253796 Jy
! Component: 1150  -  total flux cleaned = 0.0253424 Jy
! Component: 1200  -  total flux cleaned = 0.025192 Jy
! Component: 1250  -  total flux cleaned = 0.0250815 Jy
! Component: 1300  -  total flux cleaned = 0.024901 Jy
! Component: 1350  -  total flux cleaned = 0.024866 Jy
! Component: 1400  -  total flux cleaned = 0.0246932 Jy
! Component: 1450  -  total flux cleaned = 0.0245245 Jy
! Component: 1500  -  total flux cleaned = 0.0244248 Jy
! Component: 1550  -  total flux cleaned = 0.0243263 Jy
! Component: 1600  -  total flux cleaned = 0.02423 Jy
! Component: 1650  -  total flux cleaned = 0.0241042 Jy
! Component: 1700  -  total flux cleaned = 0.0240422 Jy
! Component: 1750  -  total flux cleaned = 0.0238895 Jy
! Component: 1800  -  total flux cleaned = 0.0236794 Jy
! Component: 1850  -  total flux cleaned = 0.0235903 Jy
! Component: 1900  -  total flux cleaned = 0.0234731 Jy
! Component: 1950  -  total flux cleaned = 0.0233006 Jy
! Component: 2000  -  total flux cleaned = 0.0231021 Jy
! Component: 2050  -  total flux cleaned = 0.0229899 Jy
! Component: 2100  -  total flux cleaned = 0.0227966 Jy
! Component: 2150  -  total flux cleaned = 0.0226879 Jy
! Component: 2200  -  total flux cleaned = 0.0226074 Jy
! Component: 2250  -  total flux cleaned = 0.0224747 Jy
! Component: 2300  -  total flux cleaned = 0.0223698 Jy
! Component: 2350  -  total flux cleaned = 0.0222918 Jy
! Component: 2400  -  total flux cleaned = 0.0220607 Jy
! Component: 2450  -  total flux cleaned = 0.0220354 Jy
! Component: 2500  -  total flux cleaned = 0.0219093 Jy
! Component: 2550  -  total flux cleaned = 0.0219095 Jy
! Component: 2600  -  total flux cleaned = 0.0218595 Jy
! Component: 2650  -  total flux cleaned = 0.0218349 Jy
! Component: 2700  -  total flux cleaned = 0.021835 Jy
! Component: 2750  -  total flux cleaned = 0.0218352 Jy
! Component: 2800  -  total flux cleaned = 0.021884 Jy
! Component: 2850  -  total flux cleaned = 0.0219327 Jy
! Component: 2900  -  total flux cleaned = 0.0219328 Jy
! Component: 2950  -  total flux cleaned = 0.0219814 Jy
! Component: 3000  -  total flux cleaned = 0.0220299 Jy
! Component: 3050  -  total flux cleaned = 0.0220783 Jy
! Component: 3100  -  total flux cleaned = 0.0221024 Jy
! Component: 3150  -  total flux cleaned = 0.0221266 Jy
! Component: 3200  -  total flux cleaned = 0.0221267 Jy
! Component: 3250  -  total flux cleaned = 0.0221991 Jy
! Component: 3300  -  total flux cleaned = 0.0222713 Jy
! Component: 3350  -  total flux cleaned = 0.0223192 Jy
! Component: 3400  -  total flux cleaned = 0.0223911 Jy
! Component: 3450  -  total flux cleaned = 0.0223912 Jy
! Component: 3500  -  total flux cleaned = 0.0224873 Jy
! Component: 3550  -  total flux cleaned = 0.0225114 Jy
! Component: 3600  -  total flux cleaned = 0.0225356 Jy
! Component: 3650  -  total flux cleaned = 0.0226078 Jy
! Component: 3700  -  total flux cleaned = 0.0226802 Jy
! Component: 3750  -  total flux cleaned = 0.0227525 Jy
! Component: 3800  -  total flux cleaned = 0.0228249 Jy
! Component: 3850  -  total flux cleaned = 0.0228975 Jy
! Component: 3900  -  total flux cleaned = 0.0229943 Jy
! Component: 3950  -  total flux cleaned = 0.0230185 Jy
! Component: 4000  -  total flux cleaned = 0.0230912 Jy
! Component: 4050  -  total flux cleaned = 0.0231885 Jy
! Total flux subtracted in 4096 components = 0.023286 Jy
! Clean residual min=-0.001699 max=0.001575 Jy/beam
! Clean residual mean=-0.000001 rms=0.000478 Jy/beam
! Combined flux in latest and established models = 0.195492 Jy
keep
! Adding 462 model components to the UV plane model.
! The established model now contains 539 components and 0.195491 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J1909+7813_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.932 x 10.43 at 0.828 degrees (North through East)
! Clean map  min=-0.00282  max=0.096538 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1909+7813_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0965384 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000502843 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.56262 1.56262 3.12524 6.25048 12.501 25.0019 50.0038
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0015 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.096 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J1909+7813_S_uvs.log closed on Sat Oct  5 19:00:58 2013