! Started logfile: /g0/scr/pima/npcsb_uvs/J1842+7946_X_uvs.log on Sat Oct  5 18:54:39 2013
obs /g0/scr/pima/npcsb_uvs/J1842+7946_X_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1842+7946_X_uva.fits
! AN table 1: 46 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.706522 visibilities/baseline/integration-bin.
! Found source: J1842+7946
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 3640 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1842+7946_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004737Jy  sigma=0.807103
! Fit after  self-cal, rms=0.952773Jy  sigma=0.717945
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.119 mas, bmaj=2.586 mas, bpa=-17.42 degrees
! Estimated noise=38.2677 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0594914 Jy
! Component: 100  -  total flux cleaned = 0.0731907 Jy
! Total flux subtracted in 100 components = 0.0731907 Jy
! Clean residual min=-0.014874 max=0.016631 Jy/beam
! Clean residual mean=0.000016 rms=0.004852 Jy/beam
! Combined flux in latest and established models = 0.0731907 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.0731907 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094757Jy  sigma=0.087971
! Fit after  self-cal, rms=0.092737Jy  sigma=0.086754
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.612 mas, bmaj=2.758 mas, bpa=-11.85 degrees
! Estimated noise=16.8496 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103515 Jy
! Component: 100  -  total flux cleaned = 0.0149501 Jy
! Component: 150  -  total flux cleaned = 0.0175028 Jy
! Component: 200  -  total flux cleaned = 0.0187362 Jy
! Total flux subtracted in 200 components = 0.0187362 Jy
! Clean residual min=-0.014324 max=0.016880 Jy/beam
! Clean residual mean=0.000053 rms=0.006548 Jy/beam
! Combined flux in latest and established models = 0.0919269 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 0.0919269 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095504Jy  sigma=0.083241
! Fit after  self-cal, rms=0.095417Jy  sigma=0.083168
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.70     HN        0.90     KP        1.10     
!   LA        0.76     OV        1.37     PT        1.13     SC        0.80     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.78     HN        0.84     KP        1.12     
!   LA        0.71     OV        1.32     PT        1.08     SC        0.85     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.73     HN        0.79     KP        0.91     
!   LA        0.69     OV        1.12     PT        1.09     SC        0.77     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.86     FD        0.78     HN        0.78     KP        0.81     
!   LA        0.67     OV        1.15     PT        1.12     SC        0.76     
! 
! 
! Fit before self-cal, rms=0.095417Jy  sigma=0.083168
! Fit after  self-cal, rms=0.088339Jy  sigma=0.076268
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.569 mas, bmaj=2.768 mas, bpa=-12.13 degrees
! Estimated noise=13.2902 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0134353 Jy
! Component: 100  -  total flux cleaned = -0.0167508 Jy
! Component: 150  -  total flux cleaned = -0.017911 Jy
! Component: 200  -  total flux cleaned = -0.0181602 Jy
! Total flux subtracted in 200 components = -0.0181602 Jy
! Clean residual min=-0.007846 max=0.012793 Jy/beam
! Clean residual mean=0.000036 rms=0.003013 Jy/beam
! Combined flux in latest and established models = 0.0737667 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 41 components and 0.0737667 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082450Jy  sigma=0.078340
! Fit after  self-cal, rms=0.083134Jy  sigma=0.078061
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083134Jy  sigma=0.078061
! Fit after  self-cal, rms=0.079584Jy  sigma=0.076599
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.557 mas, bmaj=2.777 mas, bpa=-11.74 degrees
! Estimated noise=11.8249 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00645704 Jy
! Component: 100  -  total flux cleaned = -0.0080503 Jy
! Component: 150  -  total flux cleaned = -0.00809241 Jy
! Component: 200  -  total flux cleaned = -0.00813244 Jy
! Total flux subtracted in 200 components = -0.00813244 Jy
! Clean residual min=-0.006379 max=0.010386 Jy/beam
! Clean residual mean=0.000032 rms=0.002434 Jy/beam
! Combined flux in latest and established models = 0.0656343 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 45 components and 0.0656343 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077294Jy  sigma=0.078084
! Fit after  self-cal, rms=0.077431Jy  sigma=0.078017
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000265674 Jy
! Component: 100  -  total flux cleaned = -0.000265779 Jy
! Component: 150  -  total flux cleaned = -0.000266363 Jy
! Component: 200  -  total flux cleaned = -0.000297135 Jy
! Total flux subtracted in 200 components = -0.000297135 Jy
! Clean residual min=-0.006302 max=0.010148 Jy/beam
! Clean residual mean=0.000032 rms=0.002420 Jy/beam
! Combined flux in latest and established models = 0.0653371 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 46 components and 0.0653371 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077371Jy  sigma=0.078034
! Fit after  self-cal, rms=0.077324Jy  sigma=0.078010
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077324Jy  sigma=0.078010
! Fit after  self-cal, rms=0.070395Jy  sigma=0.076311
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.541 mas, bmaj=2.788 mas, bpa=-11.65 degrees
! Estimated noise=10.398 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00583315 Jy
! Component: 100  -  total flux cleaned = -0.0073095 Jy
! Component: 150  -  total flux cleaned = -0.00755555 Jy
! Component: 200  -  total flux cleaned = -0.00758593 Jy
! Total flux subtracted in 200 components = -0.00758593 Jy
! Clean residual min=-0.005342 max=0.008693 Jy/beam
! Clean residual mean=0.000027 rms=0.002074 Jy/beam
! Combined flux in latest and established models = 0.0577512 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 46 components and 0.0577512 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068298Jy  sigma=0.077859
! Fit after  self-cal, rms=0.068303Jy  sigma=0.077821
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000155545 Jy
! Component: 100  -  total flux cleaned = -9.87685e-05 Jy
! Component: 150  -  total flux cleaned = -9.86765e-05 Jy
! Component: 200  -  total flux cleaned = -9.85037e-05 Jy
! Total flux subtracted in 200 components = -9.85037e-05 Jy
! Clean residual min=-0.005396 max=0.008579 Jy/beam
! Clean residual mean=0.000027 rms=0.002067 Jy/beam
! Combined flux in latest and established models = 0.0576527 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 48 components and 0.0576527 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068276Jy  sigma=0.077817
! Fit after  self-cal, rms=0.068272Jy  sigma=0.077811
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068272Jy  sigma=0.077811
! Fit after  self-cal, rms=0.061672Jy  sigma=0.076075
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.667 mas, bmaj=4.081 mas, bpa=33.37 degrees
! Estimated noise=9.92661 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0052141 Jy
! Component: 100  -  total flux cleaned = -0.00665552 Jy
! Component: 150  -  total flux cleaned = -0.00678529 Jy
! Component: 200  -  total flux cleaned = -0.00678488 Jy
! Total flux subtracted in 200 components = -0.00678488 Jy
! Clean residual min=-0.005351 max=0.008732 Jy/beam
! Clean residual mean=0.000036 rms=0.002370 Jy/beam
! Combined flux in latest and established models = 0.0508678 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 50 components and 0.0508678 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059852Jy  sigma=0.077546
! Fit after  self-cal, rms=0.059839Jy  sigma=0.077512
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.81359e-05 Jy
! Component: 100  -  total flux cleaned = -1.16029e-05 Jy
! Component: 150  -  total flux cleaned = -1.01611e-05 Jy
! Component: 200  -  total flux cleaned = -1.14886e-05 Jy
! Total flux subtracted in 200 components = -1.14886e-05 Jy
! Clean residual min=-0.005411 max=0.008670 Jy/beam
! Clean residual mean=0.000036 rms=0.002359 Jy/beam
! Combined flux in latest and established models = 0.0508563 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 51 components and 0.0508563 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059811Jy  sigma=0.077518
! Fit after  self-cal, rms=0.059805Jy  sigma=0.077513
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.526 mas, bmaj=2.801 mas, bpa=-11.62 degrees
! Estimated noise=9.09469 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.526 x 2.801 at -11.62 degrees (North through East)
! Clean map  min=-0.0045024  max=0.043067 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.082 mas, bmaj=2.609 mas, bpa=-16.66 degrees
! Estimated noise=20.0666 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.032491 Jy
! Component: 100  -  total flux cleaned = 0.041546 Jy
! Component: 150  -  total flux cleaned = 0.0449684 Jy
! Component: 200  -  total flux cleaned = 0.0456209 Jy
! Total flux subtracted in 200 components = 0.0456209 Jy
! Clean residual min=-0.005759 max=0.006576 Jy/beam
! Clean residual mean=0.000009 rms=0.001756 Jy/beam
! Combined flux in latest and established models = 0.0456209 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.0456209 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.526 mas, bmaj=2.801 mas, bpa=-11.62 degrees
! Estimated noise=9.09469 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00293691 Jy
! Component: 100  -  total flux cleaned = 0.00354886 Jy
! Component: 150  -  total flux cleaned = 0.00376319 Jy
! Component: 200  -  total flux cleaned = 0.00390092 Jy
! Total flux subtracted in 200 components = 0.00390092 Jy
! Clean residual min=-0.004719 max=0.007880 Jy/beam
! Clean residual mean=0.000023 rms=0.001894 Jy/beam
! Combined flux in latest and established models = 0.0495218 Jy
! Adding 13 model components to the UV plane model.
! The established model now contains 33 components and 0.0495218 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.667 mas, bmaj=4.081 mas, bpa=33.37 degrees
! Estimated noise=9.92661 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000854216 Jy
! Component: 100  -  total flux cleaned = 0.000855107 Jy
! Component: 150  -  total flux cleaned = 0.000903723 Jy
! Component: 200  -  total flux cleaned = 0.00094681 Jy
! Total flux subtracted in 200 components = 0.00094681 Jy
! Clean residual min=-0.005541 max=0.009126 Jy/beam
! Clean residual mean=0.000036 rms=0.002434 Jy/beam
! Combined flux in latest and established models = 0.0504686 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.63344e-07 Jy
! Component: 100  -  total flux cleaned = 3.88396e-05 Jy
! Component: 150  -  total flux cleaned = 4.18285e-05 Jy
! Component: 200  -  total flux cleaned = 7.8052e-05 Jy
! Total flux subtracted in 200 components = 7.8052e-05 Jy
! Clean residual min=-0.005531 max=0.008901 Jy/beam
! Clean residual mean=0.000036 rms=0.002401 Jy/beam
! Combined flux in latest and established models = 0.0505466 Jy
! Adding 11 model components to the UV plane model.
! The established model now contains 36 components and 0.0505466 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.526 mas, bmaj=2.801 mas, bpa=-11.62 degrees
! Estimated noise=9.09469 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000146266 Jy
! Component: 100  -  total flux cleaned = -0.000145444 Jy
! Component: 150  -  total flux cleaned = -0.000169276 Jy
! Component: 200  -  total flux cleaned = -0.000169212 Jy
! Total flux subtracted in 200 components = -0.000169212 Jy
! Clean residual min=-0.004703 max=0.007401 Jy/beam
! Clean residual mean=0.000024 rms=0.001803 Jy/beam
! Combined flux in latest and established models = 0.0503774 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 50 components and 0.0503774 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059739Jy  sigma=0.077726
! Fit after  self-cal, rms=0.059750Jy  sigma=0.077718
wmodel /g0/scr/pima/npcsb_uvs/J1842+7946_X_map.mod
! Writing 50 model components to file: /g0/scr/pima/npcsb_uvs/J1842+7946_X_map.mod
wobs /g0/scr/pima/npcsb_uvs/J1842+7946_X_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1842+7946_X_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J1842+7946_X_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsb_uvs/J1842+7946_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00316555 Jy
! Component: 100  -  total flux cleaned = 0.00557454 Jy
! Component: 150  -  total flux cleaned = 0.00749708 Jy
! Component: 200  -  total flux cleaned = 0.0084636 Jy
! Component: 250  -  total flux cleaned = 0.00846662 Jy
! Component: 300  -  total flux cleaned = 0.00826307 Jy
! Component: 350  -  total flux cleaned = 0.0081209 Jy
! Component: 400  -  total flux cleaned = 0.00781237 Jy
! Component: 450  -  total flux cleaned = 0.00789438 Jy
! Component: 500  -  total flux cleaned = 0.00785489 Jy
! Component: 550  -  total flux cleaned = 0.00796509 Jy
! Component: 600  -  total flux cleaned = 0.00814155 Jy
! Component: 650  -  total flux cleaned = 0.00844468 Jy
! Component: 700  -  total flux cleaned = 0.00867227 Jy
! Component: 750  -  total flux cleaned = 0.00879874 Jy
! Component: 800  -  total flux cleaned = 0.00892102 Jy
! Component: 850  -  total flux cleaned = 0.0091576 Jy
! Component: 900  -  total flux cleaned = 0.00930085 Jy
! Component: 950  -  total flux cleaned = 0.00949618 Jy
! Component: 1000  -  total flux cleaned = 0.0097128 Jy
! Component: 1050  -  total flux cleaned = 0.00984571 Jy
! Component: 1100  -  total flux cleaned = 0.010131 Jy
! Component: 1150  -  total flux cleaned = 0.0103082 Jy
! Component: 1200  -  total flux cleaned = 0.0105069 Jy
! Component: 1250  -  total flux cleaned = 0.010822 Jy
! Component: 1300  -  total flux cleaned = 0.0110358 Jy
! Component: 1350  -  total flux cleaned = 0.0112928 Jy
! Component: 1400  -  total flux cleaned = 0.0116132 Jy
! Component: 1450  -  total flux cleaned = 0.0117701 Jy
! Component: 1500  -  total flux cleaned = 0.012035 Jy
! Component: 1550  -  total flux cleaned = 0.0122738 Jy
! Component: 1600  -  total flux cleaned = 0.0124873 Jy
! Component: 1650  -  total flux cleaned = 0.0127189 Jy
! Component: 1700  -  total flux cleaned = 0.0129466 Jy
! Component: 1750  -  total flux cleaned = 0.0132119 Jy
! Component: 1800  -  total flux cleaned = 0.0134534 Jy
! Component: 1850  -  total flux cleaned = 0.0136722 Jy
! Component: 1900  -  total flux cleaned = 0.0139863 Jy
! Component: 1950  -  total flux cleaned = 0.0142583 Jy
! Component: 2000  -  total flux cleaned = 0.0145078 Jy
! Component: 2050  -  total flux cleaned = 0.0147358 Jy
! Component: 2100  -  total flux cleaned = 0.0149614 Jy
! Component: 2150  -  total flux cleaned = 0.0152404 Jy
! Component: 2200  -  total flux cleaned = 0.0154061 Jy
! Component: 2250  -  total flux cleaned = 0.0156068 Jy
! Component: 2300  -  total flux cleaned = 0.0157518 Jy
! Component: 2350  -  total flux cleaned = 0.0159495 Jy
! Component: 2400  -  total flux cleaned = 0.0161455 Jy
! Component: 2450  -  total flux cleaned = 0.016322 Jy
! Component: 2500  -  total flux cleaned = 0.0164799 Jy
! Component: 2550  -  total flux cleaned = 0.0166543 Jy
! Component: 2600  -  total flux cleaned = 0.0168103 Jy
! Component: 2650  -  total flux cleaned = 0.0169482 Jy
! Component: 2700  -  total flux cleaned = 0.0171198 Jy
! Component: 2750  -  total flux cleaned = 0.0172734 Jy
! Component: 2800  -  total flux cleaned = 0.0174599 Jy
! Component: 2850  -  total flux cleaned = 0.0175781 Jy
! Component: 2900  -  total flux cleaned = 0.0177458 Jy
! Component: 2950  -  total flux cleaned = 0.0178962 Jy
! Component: 3000  -  total flux cleaned = 0.0180292 Jy
! Component: 3050  -  total flux cleaned = 0.0181783 Jy
! Component: 3100  -  total flux cleaned = 0.0183102 Jy
! Component: 3150  -  total flux cleaned = 0.0184744 Jy
! Component: 3200  -  total flux cleaned = 0.0186218 Jy
! Component: 3250  -  total flux cleaned = 0.0187199 Jy
! Component: 3300  -  total flux cleaned = 0.018785 Jy
! Component: 3350  -  total flux cleaned = 0.0188988 Jy
! Component: 3400  -  total flux cleaned = 0.018996 Jy
! Component: 3450  -  total flux cleaned = 0.019077 Jy
! Component: 3500  -  total flux cleaned = 0.0191901 Jy
! Component: 3550  -  total flux cleaned = 0.0192709 Jy
! Component: 3600  -  total flux cleaned = 0.0193353 Jy
! Component: 3650  -  total flux cleaned = 0.0194319 Jy
! Component: 3700  -  total flux cleaned = 0.0194962 Jy
! Component: 3750  -  total flux cleaned = 0.0195605 Jy
! Component: 3800  -  total flux cleaned = 0.0196569 Jy
! Component: 3850  -  total flux cleaned = 0.0197372 Jy
! Component: 3900  -  total flux cleaned = 0.0198175 Jy
! Component: 3950  -  total flux cleaned = 0.0198817 Jy
! Component: 4000  -  total flux cleaned = 0.0199781 Jy
! Component: 4050  -  total flux cleaned = 0.0200745 Jy
! Total flux subtracted in 4096 components = 0.020187 Jy
! Clean residual min=-0.000937 max=0.000991 Jy/beam
! Clean residual mean=0.000002 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.0705644 Jy
keep
! Adding 292 model components to the UV plane model.
! The established model now contains 342 components and 0.0705643 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J1842+7946_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.526 x 2.801 at -11.62 degrees (North through East)
! Clean map  min=-0.0030887  max=0.044138 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1842+7946_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0441383 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000275704 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.87391 1.87391 3.74782 7.49564 14.9913 29.9826 59.9652
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0008 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.044 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J1842+7946_X_uvs.log closed on Sat Oct  5 18:54:43 2013