! Started logfile: /g0/scr/pima/npcsb_uvs/J1743-0350_X_uvs.log on Sat Oct  5 18:54:20 2013
obs /g0/scr/pima/npcsb_uvs/J1743-0350_X_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1743-0350_X_uva.fits
! AN table 1: 25 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.938667 visibilities/baseline/integration-bin.
! Found source: J1743-0350
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 4224 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1743-0350_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=4.879202Jy  sigma=219.787477
! Fit after  self-cal, rms=3.875578Jy  sigma=180.398999
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7824 mas, bmaj=1.941 mas, bpa=-0.7153 degrees
! Estimated noise=0.50832 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.79662 Jy
! Component: 100  -  total flux cleaned = 4.82748 Jy
! Total flux subtracted in 100 components = 4.82748 Jy
! Clean residual min=-0.266050 max=0.534895 Jy/beam
! Clean residual mean=-0.000069 rms=0.089945 Jy/beam
! Combined flux in latest and established models = 4.82748 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 4.82748 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.289868Jy  sigma=49.330812
! Fit after  self-cal, rms=1.290126Jy  sigma=49.325277
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9244 mas, bmaj=2.203 mas, bpa=0.592 degrees
! Estimated noise=0.309399 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.658331 Jy
! Component: 100  -  total flux cleaned = 0.96737 Jy
! Component: 150  -  total flux cleaned = 1.13624 Jy
! Component: 200  -  total flux cleaned = 1.23319 Jy
! Total flux subtracted in 200 components = 1.23319 Jy
! Clean residual min=-0.170469 max=0.311744 Jy/beam
! Clean residual mean=-0.000131 rms=0.054508 Jy/beam
! Combined flux in latest and established models = 6.06067 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 26 components and 6.06067 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.182540Jy  sigma=25.763056
! Fit after  self-cal, rms=1.182193Jy  sigma=25.753546
! Inverting map 
! Added new window around map position (2, 0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.223005 Jy
! Component: 100  -  total flux cleaned = 0.238629 Jy
! Component: 150  -  total flux cleaned = 0.233046 Jy
! Component: 200  -  total flux cleaned = 0.227908 Jy
! Total flux subtracted in 200 components = 0.227908 Jy
! Clean residual min=-0.204652 max=0.311549 Jy/beam
! Clean residual mean=-0.000050 rms=0.044979 Jy/beam
! Combined flux in latest and established models = 6.28857 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 46 components and 6.28857 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.008002Jy  sigma=22.370241
! Fit after  self-cal, rms=1.001075Jy  sigma=21.309536
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.99     KP        1.02     
!   LA        1.01     MK        1.00     NL        1.62     OV        0.99     
!   PT        1.01     SC        1.03     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        0.97     KP        0.94     
!   LA        0.95     MK        0.95     NL        1.86     OV        0.97     
!   PT        1.03     SC        1.00     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.99     HN        0.99     KP        0.86     
!   LA        0.96     MK        0.98     NL        1.64     OV        0.98     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.97     KP        0.92     
!   LA        0.95     MK        1.02     NL        1.66     OV        0.99     
!   PT        1.08     SC        1.07     
! 
! 
! Fit before self-cal, rms=1.001075Jy  sigma=21.309536
! Fit after  self-cal, rms=0.382808Jy  sigma=6.804233
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9251 mas, bmaj=2.218 mas, bpa=0.2343 degrees
! Estimated noise=0.315566 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0132854 Jy
! Component: 100  -  total flux cleaned = -0.0205403 Jy
! Component: 150  -  total flux cleaned = -0.0176174 Jy
! Component: 200  -  total flux cleaned = -0.0149483 Jy
! Total flux subtracted in 200 components = -0.0149483 Jy
! Clean residual min=-0.046556 max=0.034147 Jy/beam
! Clean residual mean=-0.000020 rms=0.008023 Jy/beam
! Combined flux in latest and established models = 6.27362 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 61 components and 6.27362 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.343133Jy  sigma=6.197612
! Fit after  self-cal, rms=0.342082Jy  sigma=6.166695
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.342082Jy  sigma=6.166695
! Fit after  self-cal, rms=0.339103Jy  sigma=6.097111
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9262 mas, bmaj=2.221 mas, bpa=0.1939 degrees
! Estimated noise=0.315262 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0126894 Jy
! Component: 100  -  total flux cleaned = -0.0101796 Jy
! Component: 150  -  total flux cleaned = -0.00789017 Jy
! Component: 200  -  total flux cleaned = -0.00577851 Jy
! Total flux subtracted in 200 components = -0.00577851 Jy
! Clean residual min=-0.042510 max=0.026225 Jy/beam
! Clean residual mean=-0.000019 rms=0.006976 Jy/beam
! Combined flux in latest and established models = 6.26785 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 65 components and 6.26785 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.316509Jy  sigma=5.868625
! Fit after  self-cal, rms=0.315005Jy  sigma=5.858728
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00117029 Jy
! Component: 100  -  total flux cleaned = 0.00068662 Jy
! Component: 150  -  total flux cleaned = 0.00249622 Jy
! Component: 200  -  total flux cleaned = 0.00417909 Jy
! Total flux subtracted in 200 components = 0.00417909 Jy
! Clean residual min=-0.039207 max=0.024837 Jy/beam
! Clean residual mean=-0.000020 rms=0.006643 Jy/beam
! Combined flux in latest and established models = 6.27202 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 69 components and 6.27203 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.301159Jy  sigma=5.734750
! Fit after  self-cal, rms=0.299970Jy  sigma=5.726611
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.299970Jy  sigma=5.726611
! Fit after  self-cal, rms=0.296985Jy  sigma=5.697880
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9265 mas, bmaj=2.222 mas, bpa=0.1979 degrees
! Estimated noise=0.315239 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00839193 Jy
! Component: 100  -  total flux cleaned = -0.00670185 Jy
! Component: 150  -  total flux cleaned = -0.00589692 Jy
! Component: 200  -  total flux cleaned = -0.00512955 Jy
! Total flux subtracted in 200 components = -0.00512955 Jy
! Clean residual min=-0.037784 max=0.022445 Jy/beam
! Clean residual mean=-0.000019 rms=0.006175 Jy/beam
! Combined flux in latest and established models = 6.2669 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 72 components and 6.2669 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.284013Jy  sigma=5.597025
! Fit after  self-cal, rms=0.282693Jy  sigma=5.583378
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00512553 Jy
! Component: 100  -  total flux cleaned = -0.00370388 Jy
! Component: 150  -  total flux cleaned = -0.00303585 Jy
! Component: 200  -  total flux cleaned = -0.0023712 Jy
! Total flux subtracted in 200 components = -0.0023712 Jy
! Clean residual min=-0.035795 max=0.021007 Jy/beam
! Clean residual mean=-0.000020 rms=0.005867 Jy/beam
! Combined flux in latest and established models = 6.26452 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 72 components and 6.26452 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.273870Jy  sigma=5.503045
! Fit after  self-cal, rms=0.272950Jy  sigma=5.493985
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.272950Jy  sigma=5.493985
! Fit after  self-cal, rms=0.270781Jy  sigma=5.481010
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.484 mas, bmaj=3.759 mas, bpa=9.317 degrees
! Estimated noise=0.343557 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0122782 Jy
! Component: 100  -  total flux cleaned = -0.0126746 Jy
! Component: 150  -  total flux cleaned = -0.012046 Jy
! Component: 200  -  total flux cleaned = -0.0112093 Jy
! Total flux subtracted in 200 components = -0.0112093 Jy
! Clean residual min=-0.033815 max=0.018472 Jy/beam
! Clean residual mean=-0.000042 rms=0.006872 Jy/beam
! Combined flux in latest and established models = 6.25331 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 81 components and 6.25331 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.268992Jy  sigma=5.485331
! Fit after  self-cal, rms=0.267973Jy  sigma=5.476578
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00309166 Jy
! Component: 100  -  total flux cleaned = -0.00309864 Jy
! Component: 150  -  total flux cleaned = -0.00237472 Jy
! Component: 200  -  total flux cleaned = -0.00195187 Jy
! Total flux subtracted in 200 components = -0.00195187 Jy
! Clean residual min=-0.031825 max=0.018040 Jy/beam
! Clean residual mean=-0.000042 rms=0.006608 Jy/beam
! Combined flux in latest and established models = 6.25136 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 87 components and 6.25136 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.267719Jy  sigma=5.467388
! Fit after  self-cal, rms=0.266854Jy  sigma=5.460943
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9263 mas, bmaj=2.221 mas, bpa=0.2095 degrees
! Estimated noise=0.315162 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9263 x 2.221 at 0.2095 degrees (North through East)
! Clean map  min=-0.042801  max=5.0336 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.266854Jy  sigma=5.460943
! Fit after  self-cal, rms=0.249241Jy  sigma=4.672593
! Inverting map and beam 
! Estimated beam: bmin=0.9261 mas, bmaj=2.221 mas, bpa=0.2208 degrees
! Estimated noise=0.314904 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.011081 Jy
! Component: 100  -  total flux cleaned = -0.0110795 Jy
! Component: 150  -  total flux cleaned = -0.0104583 Jy
! Component: 200  -  total flux cleaned = -0.0104738 Jy
! Total flux subtracted in 200 components = -0.0104738 Jy
! Clean residual min=-0.031906 max=0.019529 Jy/beam
! Clean residual mean=-0.000018 rms=0.005217 Jy/beam
! Combined flux in latest and established models = 6.24089 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 91 components and 6.24089 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.240644Jy  sigma=4.579891
! Fit after  self-cal, rms=0.239655Jy  sigma=4.566059
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00492553 Jy
! Component: 100  -  total flux cleaned = -0.00436291 Jy
! Component: 150  -  total flux cleaned = -0.00437452 Jy
! Component: 200  -  total flux cleaned = -0.00387262 Jy
! Total flux subtracted in 200 components = -0.00387262 Jy
! Clean residual min=-0.030118 max=0.018807 Jy/beam
! Clean residual mean=-0.000019 rms=0.004968 Jy/beam
! Combined flux in latest and established models = 6.23701 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 94 components and 6.23701 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.233058Jy  sigma=4.506616
! Fit after  self-cal, rms=0.232315Jy  sigma=4.497879
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.232315Jy  sigma=4.497879
! Fit after  self-cal, rms=0.230168Jy  sigma=4.485790
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7805 mas, bmaj=1.958 mas, bpa=-1.212 degrees
! Estimated noise=0.51815 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.86095 Jy
! Component: 100  -  total flux cleaned = 4.93324 Jy
! Component: 150  -  total flux cleaned = 5.45772 Jy
! Component: 200  -  total flux cleaned = 5.7374 Jy
! Total flux subtracted in 200 components = 5.7374 Jy
! Clean residual min=-0.100595 max=0.142443 Jy/beam
! Clean residual mean=-0.000024 rms=0.025934 Jy/beam
! Combined flux in latest and established models = 5.73741 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 5.73741 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9261 mas, bmaj=2.221 mas, bpa=0.2315 degrees
! Estimated noise=0.31491 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.220894 Jy
! Component: 100  -  total flux cleaned = 0.343586 Jy
! Component: 150  -  total flux cleaned = 0.416257 Jy
! Component: 200  -  total flux cleaned = 0.460509 Jy
! Total flux subtracted in 200 components = 0.460509 Jy
! Clean residual min=-0.057653 max=0.034521 Jy/beam
! Clean residual mean=-0.000030 rms=0.008094 Jy/beam
! Combined flux in latest and established models = 6.19792 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 46 components and 6.19791 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.487 mas, bmaj=3.763 mas, bpa=9.417 degrees
! Estimated noise=0.343116 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0290165 Jy
! Component: 100  -  total flux cleaned = 0.0400122 Jy
! Component: 150  -  total flux cleaned = 0.040028 Jy
! Component: 200  -  total flux cleaned = 0.0400364 Jy
! Total flux subtracted in 200 components = 0.0400364 Jy
! Clean residual min=-0.032130 max=0.019193 Jy/beam
! Clean residual mean=-0.000034 rms=0.006303 Jy/beam
! Combined flux in latest and established models = 6.23795 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000333421 Jy
! Component: 100  -  total flux cleaned = -0.000342081 Jy
! Component: 150  -  total flux cleaned = -0.000663792 Jy
! Component: 200  -  total flux cleaned = -0.000969285 Jy
! Total flux subtracted in 200 components = -0.000969285 Jy
! Clean residual min=-0.031689 max=0.018248 Jy/beam
! Clean residual mean=-0.000035 rms=0.006163 Jy/beam
! Combined flux in latest and established models = 6.23698 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 66 components and 6.23698 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9261 mas, bmaj=2.221 mas, bpa=0.2315 degrees
! Estimated noise=0.31491 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0145318 Jy
! Component: 100  -  total flux cleaned = -0.0171711 Jy
! Component: 150  -  total flux cleaned = -0.0195445 Jy
! Component: 200  -  total flux cleaned = -0.019484 Jy
! Total flux subtracted in 200 components = -0.019484 Jy
! Clean residual min=-0.044363 max=0.025509 Jy/beam
! Clean residual mean=-0.000025 rms=0.006505 Jy/beam
! Combined flux in latest and established models = 6.2175 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 71 components and 6.2175 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.274133Jy  sigma=5.072760
! Fit after  self-cal, rms=0.271315Jy  sigma=5.012511
wmodel /g0/scr/pima/npcsb_uvs/J1743-0350_X_map.mod
! Writing 71 model components to file: /g0/scr/pima/npcsb_uvs/J1743-0350_X_map.mod
wobs /g0/scr/pima/npcsb_uvs/J1743-0350_X_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1743-0350_X_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J1743-0350_X_map.win
! wwins: Wrote 2 windows to /g0/scr/pima/npcsb_uvs/J1743-0350_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.0176015 Jy
! Component: 100  -  total flux cleaned = -0.0320859 Jy
! Component: 150  -  total flux cleaned = -0.0431369 Jy
! Component: 200  -  total flux cleaned = -0.051428 Jy
! Component: 250  -  total flux cleaned = -0.0592318 Jy
! Component: 300  -  total flux cleaned = -0.0674719 Jy
! Component: 350  -  total flux cleaned = -0.0753216 Jy
! Component: 400  -  total flux cleaned = -0.0824443 Jy
! Component: 450  -  total flux cleaned = -0.0889291 Jy
! Component: 500  -  total flux cleaned = -0.0955673 Jy
! Component: 550  -  total flux cleaned = -0.102362 Jy
! Component: 600  -  total flux cleaned = -0.108616 Jy
! Component: 650  -  total flux cleaned = -0.113021 Jy
! Component: 700  -  total flux cleaned = -0.117326 Jy
! Component: 750  -  total flux cleaned = -0.12186 Jy
! Component: 800  -  total flux cleaned = -0.125667 Jy
! Component: 850  -  total flux cleaned = -0.130018 Jy
! Component: 900  -  total flux cleaned = -0.132764 Jy
! Component: 950  -  total flux cleaned = -0.136049 Jy
! Component: 1000  -  total flux cleaned = -0.139271 Jy
! Component: 1050  -  total flux cleaned = -0.141576 Jy
! Component: 1100  -  total flux cleaned = -0.144685 Jy
! Component: 1150  -  total flux cleaned = -0.147462 Jy
! Component: 1200  -  total flux cleaned = -0.15019 Jy
! Component: 1250  -  total flux cleaned = -0.152608 Jy
! Component: 1300  -  total flux cleaned = -0.155246 Jy
! Component: 1350  -  total flux cleaned = -0.158096 Jy
! Component: 1400  -  total flux cleaned = -0.16064 Jy
! Component: 1450  -  total flux cleaned = -0.162644 Jy
! Component: 1500  -  total flux cleaned = -0.164864 Jy
! Component: 1550  -  total flux cleaned = -0.167288 Jy
! Component: 1600  -  total flux cleaned = -0.169434 Jy
! Component: 1650  -  total flux cleaned = -0.171786 Jy
! Component: 1700  -  total flux cleaned = -0.173641 Jy
! Component: 1750  -  total flux cleaned = -0.175927 Jy
! Component: 1800  -  total flux cleaned = -0.177953 Jy
! Component: 1850  -  total flux cleaned = -0.179287 Jy
! Component: 1900  -  total flux cleaned = -0.181702 Jy
! Component: 1950  -  total flux cleaned = -0.183865 Jy
! Component: 2000  -  total flux cleaned = -0.185359 Jy
! Component: 2050  -  total flux cleaned = -0.187259 Jy
! Component: 2100  -  total flux cleaned = -0.189134 Jy
! Component: 2150  -  total flux cleaned = -0.19119 Jy
! Component: 2200  -  total flux cleaned = -0.192815 Jy
! Component: 2250  -  total flux cleaned = -0.194418 Jy
! Component: 2300  -  total flux cleaned = -0.195805 Jy
! Component: 2350  -  total flux cleaned = -0.19737 Jy
! Component: 2400  -  total flux cleaned = -0.198724 Jy
! Component: 2450  -  total flux cleaned = -0.200255 Jy
! Component: 2500  -  total flux cleaned = -0.201391 Jy
! Component: 2550  -  total flux cleaned = -0.202703 Jy
! Component: 2600  -  total flux cleaned = -0.203813 Jy
! Component: 2650  -  total flux cleaned = -0.205278 Jy
! Component: 2700  -  total flux cleaned = -0.206726 Jy
! Component: 2750  -  total flux cleaned = -0.207801 Jy
! Component: 2800  -  total flux cleaned = -0.209042 Jy
! Component: 2850  -  total flux cleaned = -0.209919 Jy
! Component: 2900  -  total flux cleaned = -0.210962 Jy
! Component: 2950  -  total flux cleaned = -0.21182 Jy
! Component: 3000  -  total flux cleaned = -0.21318 Jy
! Component: 3050  -  total flux cleaned = -0.213683 Jy
! Component: 3100  -  total flux cleaned = -0.214515 Jy
! Component: 3150  -  total flux cleaned = -0.21501 Jy
! Component: 3200  -  total flux cleaned = -0.216151 Jy
! Component: 3250  -  total flux cleaned = -0.216636 Jy
! Component: 3300  -  total flux cleaned = -0.217276 Jy
! Component: 3350  -  total flux cleaned = -0.217753 Jy
! Component: 3400  -  total flux cleaned = -0.218855 Jy
! Component: 3450  -  total flux cleaned = -0.219635 Jy
! Component: 3500  -  total flux cleaned = -0.2201 Jy
! Component: 3550  -  total flux cleaned = -0.220868 Jy
! Component: 3600  -  total flux cleaned = -0.221477 Jy
! Component: 3650  -  total flux cleaned = -0.222231 Jy
! Component: 3700  -  total flux cleaned = -0.223277 Jy
! Component: 3750  -  total flux cleaned = -0.224014 Jy
! Component: 3800  -  total flux cleaned = -0.224161 Jy
! Component: 3850  -  total flux cleaned = -0.224888 Jy
! Component: 3900  -  total flux cleaned = -0.225753 Jy
! Component: 3950  -  total flux cleaned = -0.226183 Jy
! Component: 4000  -  total flux cleaned = -0.226892 Jy
! Component: 4050  -  total flux cleaned = -0.227454 Jy
! Total flux subtracted in 4096 components = -0.227873 Jy
! Clean residual min=-0.007754 max=0.006945 Jy/beam
! Clean residual mean=-0.000015 rms=0.002057 Jy/beam
! Combined flux in latest and established models = 5.98962 Jy
keep
! Adding 163 model components to the UV plane model.
! The established model now contains 233 components and 5.98962 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J1743-0350_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9261 x 2.221 at 0.2315 degrees (North through East)
! Clean map  min=-0.022567  max=5.0859 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1743-0350_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 5.08593 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00205522 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.121229 0.121229 0.242459 0.484918 0.969836 1.93967 3.87934 7.75869 15.5174 31.0347 62.0695
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0061 
print "peak=",int(1000*peak_flux)/1000
! peak= 5.085 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J1743-0350_X_uvs.log closed on Sat Oct  5 18:54:24 2013