! Started logfile: /g0/scr/pima/npcsb_uvs/J1725+7726_S_uvs.log on Sat Oct 5 19:00:16 2013 obs /g0/scr/pima/npcsb_uvs/J1725+7726_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1725+7726_S_uva.fits ! AN table 1: 45 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.835062 visibilities/baseline/integration-bin. ! Found source: J1725+7726 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 6764 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1725+7726_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.012223Jy sigma=1.405522 ! Fit after self-cal, rms=0.915268Jy sigma=0.966936 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.635 mas, bmaj=11.17 mas, bpa=-1.788 degrees ! Estimated noise=18.8654 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.102833 Jy ! Component: 100 - total flux cleaned = 0.149209 Jy ! Total flux subtracted in 100 components = 0.149209 Jy ! Clean residual min=-0.027386 max=0.035776 Jy/beam ! Clean residual mean=0.000417 rms=0.011485 Jy/beam ! Combined flux in latest and established models = 0.149209 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.149209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152513Jy sigma=0.447054 ! Fit after self-cal, rms=0.150336Jy sigma=0.446120 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.588 mas, bmaj=11.84 mas, bpa=-2.852 degrees ! Estimated noise=8.08555 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0967312 Jy ! Component: 100 - total flux cleaned = 0.156265 Jy ! Component: 150 - total flux cleaned = 0.193583 Jy ! Component: 200 - total flux cleaned = 0.216995 Jy ! Total flux subtracted in 200 components = 0.216995 Jy ! Clean residual min=-0.053031 max=0.060733 Jy/beam ! Clean residual mean=0.000877 rms=0.022374 Jy/beam ! Combined flux in latest and established models = 0.366205 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 67 components and 0.366205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151217Jy sigma=0.287495 ! Fit after self-cal, rms=0.149655Jy sigma=0.285888 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.52 FD 1.81 HN 0.65 KP 1.00 ! LA 0.98 MK 0.73 NL 1.43 OV 2.44 ! PT 0.68 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 1.81 HN 0.66 KP 0.98 ! LA 0.90 MK 0.90 NL 1.32 OV 2.38 ! PT 0.67 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.72 HN 0.77 KP 1.07 ! LA 0.78 MK 1.11 NL 1.45 OV 2.38 ! PT 0.74 SC 0.82 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.38 FD 1.61 HN 0.61 KP 1.00 ! LA 0.69 MK 0.72 NL 1.15 OV 1.96 ! PT 0.66 SC 0.88 ! ! ! Fit before self-cal, rms=0.149655Jy sigma=0.285888 ! Fit after self-cal, rms=0.186330Jy sigma=0.158791 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.447 mas, bmaj=12.01 mas, bpa=-4.408 degrees ! Estimated noise=7.73229 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0147171 Jy ! Component: 100 - total flux cleaned = -0.019902 Jy ! Component: 150 - total flux cleaned = -0.0206888 Jy ! Component: 200 - total flux cleaned = -0.0209472 Jy ! Total flux subtracted in 200 components = -0.0209472 Jy ! Clean residual min=-0.018684 max=0.029250 Jy/beam ! Clean residual mean=0.000114 rms=0.006954 Jy/beam ! Combined flux in latest and established models = 0.345257 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 74 components and 0.345257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184190Jy sigma=0.161493 ! Fit after self-cal, rms=0.187709Jy sigma=0.158802 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187709Jy sigma=0.158802 ! Fit after self-cal, rms=0.184398Jy sigma=0.155147 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.454 mas, bmaj=11.97 mas, bpa=-4.46 degrees ! Estimated noise=7.26447 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0123441 Jy ! Component: 100 - total flux cleaned = -0.017789 Jy ! Component: 150 - total flux cleaned = -0.0192116 Jy ! Component: 200 - total flux cleaned = -0.019314 Jy ! Total flux subtracted in 200 components = -0.019314 Jy ! Clean residual min=-0.017193 max=0.024469 Jy/beam ! Clean residual mean=0.000120 rms=0.006370 Jy/beam ! Combined flux in latest and established models = 0.325943 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 86 components and 0.325943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182100Jy sigma=0.158198 ! Fit after self-cal, rms=0.182222Jy sigma=0.158017 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000189509 Jy ! Component: 100 - total flux cleaned = -0.000442854 Jy ! Component: 150 - total flux cleaned = -0.000545258 Jy ! Component: 200 - total flux cleaned = -0.000641658 Jy ! Total flux subtracted in 200 components = -0.000641658 Jy ! Clean residual min=-0.017517 max=0.024384 Jy/beam ! Clean residual mean=0.000126 rms=0.006414 Jy/beam ! Combined flux in latest and established models = 0.325302 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 90 components and 0.325302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181985Jy sigma=0.158237 ! Fit after self-cal, rms=0.181991Jy sigma=0.158153 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181991Jy sigma=0.158153 ! Fit after self-cal, rms=0.173543Jy sigma=0.154552 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.453 mas, bmaj=11.95 mas, bpa=-4.517 degrees ! Estimated noise=6.79713 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0105925 Jy ! Component: 100 - total flux cleaned = -0.0154417 Jy ! Component: 150 - total flux cleaned = -0.0179106 Jy ! Component: 200 - total flux cleaned = -0.018138 Jy ! Total flux subtracted in 200 components = -0.018138 Jy ! Clean residual min=-0.016537 max=0.022715 Jy/beam ! Clean residual mean=0.000116 rms=0.005979 Jy/beam ! Combined flux in latest and established models = 0.307164 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 104 components and 0.307164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171193Jy sigma=0.157940 ! Fit after self-cal, rms=0.171186Jy sigma=0.157829 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.39588e-05 Jy ! Component: 100 - total flux cleaned = -0.000157434 Jy ! Component: 150 - total flux cleaned = -0.000237709 Jy ! Component: 200 - total flux cleaned = -0.000239029 Jy ! Total flux subtracted in 200 components = -0.000239029 Jy ! Clean residual min=-0.016751 max=0.022862 Jy/beam ! Clean residual mean=0.000119 rms=0.005996 Jy/beam ! Combined flux in latest and established models = 0.306925 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 106 components and 0.306925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171003Jy sigma=0.158011 ! Fit after self-cal, rms=0.171021Jy sigma=0.157948 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171021Jy sigma=0.157948 ! Fit after self-cal, rms=0.162050Jy sigma=0.154491 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.824 mas, bmaj=15.34 mas, bpa=-8.699 degrees ! Estimated noise=6.35189 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0112598 Jy ! Component: 100 - total flux cleaned = -0.0135965 Jy ! Component: 150 - total flux cleaned = -0.0138579 Jy ! Component: 200 - total flux cleaned = -0.0140833 Jy ! Total flux subtracted in 200 components = -0.0140833 Jy ! Clean residual min=-0.023845 max=0.035570 Jy/beam ! Clean residual mean=0.000167 rms=0.009426 Jy/beam ! Combined flux in latest and established models = 0.292841 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 119 components and 0.292841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160241Jy sigma=0.157712 ! Fit after self-cal, rms=0.160344Jy sigma=0.157145 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000157883 Jy ! Component: 100 - total flux cleaned = -0.000575658 Jy ! Component: 150 - total flux cleaned = -0.000793727 Jy ! Component: 200 - total flux cleaned = -0.000891783 Jy ! Total flux subtracted in 200 components = -0.000891783 Jy ! Clean residual min=-0.024368 max=0.035852 Jy/beam ! Clean residual mean=0.000175 rms=0.009444 Jy/beam ! Combined flux in latest and established models = 0.29195 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 122 components and 0.29195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160291Jy sigma=0.158190 ! Fit after self-cal, rms=0.160427Jy sigma=0.157885 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.426 mas, bmaj=11.92 mas, bpa=-4.533 degrees ! Estimated noise=6.33859 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.426 x 11.92 at -4.533 degrees (North through East) ! Clean map min=-0.016057 max=0.12971 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.457 mas, bmaj=11.06 mas, bpa=-3.317 degrees ! Estimated noise=15.0874 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0817335 Jy ! Component: 100 - total flux cleaned = 0.126501 Jy ! Component: 150 - total flux cleaned = 0.158646 Jy ! Component: 200 - total flux cleaned = 0.182913 Jy ! Total flux subtracted in 200 components = 0.182913 Jy ! Clean residual min=-0.017903 max=0.019366 Jy/beam ! Clean residual mean=0.000187 rms=0.005725 Jy/beam ! Combined flux in latest and established models = 0.182913 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.182913 Jy ! Inverting map and beam ! Estimated beam: bmin=3.426 mas, bmaj=11.92 mas, bpa=-4.533 degrees ! Estimated noise=6.33859 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0444094 Jy ! Component: 100 - total flux cleaned = 0.0692629 Jy ! Component: 150 - total flux cleaned = 0.0836229 Jy ! Component: 200 - total flux cleaned = 0.0919574 Jy ! Total flux subtracted in 200 components = 0.0919574 Jy ! Clean residual min=-0.018420 max=0.022555 Jy/beam ! Clean residual mean=0.000184 rms=0.006436 Jy/beam ! Combined flux in latest and established models = 0.27487 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 45 components and 0.27487 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.824 mas, bmaj=15.34 mas, bpa=-8.699 degrees ! Estimated noise=6.35189 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105424 Jy ! Component: 100 - total flux cleaned = 0.013471 Jy ! Component: 150 - total flux cleaned = 0.013589 Jy ! Component: 200 - total flux cleaned = 0.0137018 Jy ! Total flux subtracted in 200 components = 0.0137018 Jy ! Clean residual min=-0.025697 max=0.035926 Jy/beam ! Clean residual mean=0.000209 rms=0.009710 Jy/beam ! Combined flux in latest and established models = 0.288572 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109817 Jy ! Component: 100 - total flux cleaned = 0.000212675 Jy ! Component: 150 - total flux cleaned = 0.000315846 Jy ! Component: 200 - total flux cleaned = 0.000411353 Jy ! Total flux subtracted in 200 components = 0.000411353 Jy ! Clean residual min=-0.025561 max=0.036245 Jy/beam ! Clean residual mean=0.000205 rms=0.009694 Jy/beam ! Combined flux in latest and established models = 0.288983 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 50 components and 0.288983 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.426 mas, bmaj=11.92 mas, bpa=-4.533 degrees ! Estimated noise=6.33859 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00300321 Jy ! Component: 100 - total flux cleaned = -0.0029906 Jy ! Component: 150 - total flux cleaned = -0.00330703 Jy ! Component: 200 - total flux cleaned = -0.00339357 Jy ! Total flux subtracted in 200 components = -0.00339357 Jy ! Clean residual min=-0.016589 max=0.023649 Jy/beam ! Clean residual mean=0.000132 rms=0.005812 Jy/beam ! Combined flux in latest and established models = 0.28559 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 61 components and 0.28559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160724Jy sigma=0.160165 ! Fit after self-cal, rms=0.160465Jy sigma=0.159906 wmodel /g0/scr/pima/npcsb_uvs/J1725+7726_S_map.mod ! Writing 61 model components to file: /g0/scr/pima/npcsb_uvs/J1725+7726_S_map.mod wobs /g0/scr/pima/npcsb_uvs/J1725+7726_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1725+7726_S_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J1725+7726_S_map.win ! wwins: Wrote 1 windows to /g0/scr/pima/npcsb_uvs/J1725+7726_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00837133 Jy ! Component: 100 - total flux cleaned = 0.0113295 Jy ! Component: 150 - total flux cleaned = 0.0150888 Jy ! Component: 200 - total flux cleaned = 0.0186312 Jy ! Component: 250 - total flux cleaned = 0.0227039 Jy ! Component: 300 - total flux cleaned = 0.0261287 Jy ! Component: 350 - total flux cleaned = 0.0296321 Jy ! Component: 400 - total flux cleaned = 0.0327937 Jy ! Component: 450 - total flux cleaned = 0.0366534 Jy ! Component: 500 - total flux cleaned = 0.0391941 Jy ! Component: 550 - total flux cleaned = 0.0416613 Jy ! Component: 600 - total flux cleaned = 0.044048 Jy ! Component: 650 - total flux cleaned = 0.0463522 Jy ! Component: 700 - total flux cleaned = 0.0484183 Jy ! Component: 750 - total flux cleaned = 0.0507523 Jy ! Component: 800 - total flux cleaned = 0.0528575 Jy ! Component: 850 - total flux cleaned = 0.0545889 Jy ! Component: 900 - total flux cleaned = 0.0559664 Jy ! Component: 950 - total flux cleaned = 0.0573127 Jy ! Component: 1000 - total flux cleaned = 0.0587696 Jy ! Component: 1050 - total flux cleaned = 0.0597596 Jy ! Component: 1100 - total flux cleaned = 0.0605915 Jy ! Component: 1150 - total flux cleaned = 0.0614047 Jy ! Component: 1200 - total flux cleaned = 0.062067 Jy ! Component: 1250 - total flux cleaned = 0.062843 Jy ! Component: 1300 - total flux cleaned = 0.0633493 Jy ! Component: 1350 - total flux cleaned = 0.0638437 Jy ! Component: 1400 - total flux cleaned = 0.0643247 Jy ! Component: 1450 - total flux cleaned = 0.0651521 Jy ! Component: 1500 - total flux cleaned = 0.0654976 Jy ! Component: 1550 - total flux cleaned = 0.0662866 Jy ! Component: 1600 - total flux cleaned = 0.0669489 Jy ! Component: 1650 - total flux cleaned = 0.0668395 Jy ! Component: 1700 - total flux cleaned = 0.0671587 Jy ! Component: 1750 - total flux cleaned = 0.0673699 Jy ! Component: 1800 - total flux cleaned = 0.0674718 Jy ! Component: 1850 - total flux cleaned = 0.0676746 Jy ! Component: 1900 - total flux cleaned = 0.0682657 Jy ! Component: 1950 - total flux cleaned = 0.0684574 Jy ! Component: 2000 - total flux cleaned = 0.0684585 Jy ! Component: 2050 - total flux cleaned = 0.0690213 Jy ! Component: 2100 - total flux cleaned = 0.0691143 Jy ! Component: 2150 - total flux cleaned = 0.0695672 Jy ! Component: 2200 - total flux cleaned = 0.0699234 Jy ! Component: 2250 - total flux cleaned = 0.0702739 Jy ! Component: 2300 - total flux cleaned = 0.0706197 Jy ! Component: 2350 - total flux cleaned = 0.0711303 Jy ! Component: 2400 - total flux cleaned = 0.0712961 Jy ! Component: 2450 - total flux cleaned = 0.0714617 Jy ! Component: 2500 - total flux cleaned = 0.0713798 Jy ! Component: 2550 - total flux cleaned = 0.0712994 Jy ! Component: 2600 - total flux cleaned = 0.0714571 Jy ! Component: 2650 - total flux cleaned = 0.0714562 Jy ! Component: 2700 - total flux cleaned = 0.0714544 Jy ! Component: 2750 - total flux cleaned = 0.0714535 Jy ! Component: 2800 - total flux cleaned = 0.071078 Jy ! Component: 2850 - total flux cleaned = 0.0711534 Jy ! Component: 2900 - total flux cleaned = 0.0710805 Jy ! Component: 2950 - total flux cleaned = 0.0708637 Jy ! Component: 3000 - total flux cleaned = 0.0710079 Jy ! Component: 3050 - total flux cleaned = 0.0708659 Jy ! Component: 3100 - total flux cleaned = 0.0708665 Jy ! Component: 3150 - total flux cleaned = 0.0705207 Jy ! Component: 3200 - total flux cleaned = 0.0705217 Jy ! Component: 3250 - total flux cleaned = 0.0705223 Jy ! Component: 3300 - total flux cleaned = 0.0704552 Jy ! Component: 3350 - total flux cleaned = 0.0703881 Jy ! Component: 3400 - total flux cleaned = 0.0701911 Jy ! Component: 3450 - total flux cleaned = 0.0701263 Jy ! Component: 3500 - total flux cleaned = 0.070126 Jy ! Component: 3550 - total flux cleaned = 0.0697419 Jy ! Component: 3600 - total flux cleaned = 0.0697425 Jy ! Component: 3650 - total flux cleaned = 0.069617 Jy ! Component: 3700 - total flux cleaned = 0.0694296 Jy ! Component: 3750 - total flux cleaned = 0.0694297 Jy ! Component: 3800 - total flux cleaned = 0.0693069 Jy ! Component: 3850 - total flux cleaned = 0.0694282 Jy ! Component: 3900 - total flux cleaned = 0.0693671 Jy ! Component: 3950 - total flux cleaned = 0.0693068 Jy ! Component: 4000 - total flux cleaned = 0.0693661 Jy ! Component: 4050 - total flux cleaned = 0.0693656 Jy ! Total flux subtracted in 4096 components = 0.0693657 Jy ! Clean residual min=-0.003660 max=0.003039 Jy/beam ! Clean residual mean=0.000017 rms=0.001187 Jy/beam ! Combined flux in latest and established models = 0.354955 Jy keep ! Adding 440 model components to the UV plane model. ! The established model now contains 501 components and 0.354955 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J1725+7726_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.426 x 11.92 at -4.533 degrees (North through East) ! Clean map min=-0.007625 max=0.12975 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1725+7726_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.129754 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00115134 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.66198 2.66198 5.32396 10.6479 21.2958 42.5917 85.1833 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0034 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.129 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J1725+7726_S_uvs.log closed on Sat Oct 5 19:00:20 2013