! Started logfile: /g0/scr/pima/npcsb_uvs/J1705+7756_X_uvs.log on Sat Oct  5 18:54:09 2013
obs /g0/scr/pima/npcsb_uvs/J1705+7756_X_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1705+7756_X_uva.fits
! AN table 1: 47 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.892435 visibilities/baseline/integration-bin.
! Found source: J1705+7756
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 6040 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1705+7756_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004169Jy  sigma=0.839020
! Fit after  self-cal, rms=0.948820Jy  sigma=0.751499
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7269 mas, bmaj=2.529 mas, bpa=5.015 degrees
! Estimated noise=22.7124 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0579738 Jy
! Component: 100  -  total flux cleaned = 0.0724262 Jy
! Total flux subtracted in 100 components = 0.0724262 Jy
! Clean residual min=-0.007946 max=0.008595 Jy/beam
! Clean residual mean=-0.000009 rms=0.001855 Jy/beam
! Combined flux in latest and established models = 0.0724262 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0724262 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090092Jy  sigma=0.079359
! Fit after  self-cal, rms=0.088917Jy  sigma=0.078496
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9066 mas, bmaj=2.616 mas, bpa=3.867 degrees
! Estimated noise=12.3472 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0128137 Jy
! Component: 100  -  total flux cleaned = 0.0187997 Jy
! Component: 150  -  total flux cleaned = 0.0216308 Jy
! Component: 200  -  total flux cleaned = 0.023089 Jy
! Total flux subtracted in 200 components = 0.023089 Jy
! Clean residual min=-0.004779 max=0.004014 Jy/beam
! Clean residual mean=0.000002 rms=0.000975 Jy/beam
! Combined flux in latest and established models = 0.0955152 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 29 components and 0.0955152 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090321Jy  sigma=0.074739
! Fit after  self-cal, rms=0.090271Jy  sigma=0.074638
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     FD        0.90     HN        0.89     KP        0.94     
!   LA        0.96     MK        0.94     OV        0.92     PT        0.95     
!   SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.83     FD        0.92     HN        0.86     KP        0.85     
!   LA        0.90     MK        1.03     OV        0.92     PT        1.00     
!   SC        0.82     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.87     HN        0.94     KP        0.79     
!   LA        0.95     MK        0.79     OV        0.96     PT        0.90     
!   SC        0.81     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        0.86     HN        0.86     KP        0.86     
!   LA        0.81     MK        0.79     OV        0.86     PT        1.02     
!   SC        0.77     
! 
! 
! Fit before self-cal, rms=0.090271Jy  sigma=0.074638
! Fit after  self-cal, rms=0.076681Jy  sigma=0.072040
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8942 mas, bmaj=2.606 mas, bpa=3.935 degrees
! Estimated noise=9.75109 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0127738 Jy
! Component: 100  -  total flux cleaned = -0.0153516 Jy
! Component: 150  -  total flux cleaned = -0.0151036 Jy
! Component: 200  -  total flux cleaned = -0.0149 Jy
! Total flux subtracted in 200 components = -0.0149 Jy
! Clean residual min=-0.003308 max=0.002876 Jy/beam
! Clean residual mean=-0.000004 rms=0.000727 Jy/beam
! Combined flux in latest and established models = 0.0806152 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 31 components and 0.0806152 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070878Jy  sigma=0.073981
! Fit after  self-cal, rms=0.070899Jy  sigma=0.073921
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070899Jy  sigma=0.073921
! Fit after  self-cal, rms=0.061321Jy  sigma=0.071989
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8794 mas, bmaj=2.602 mas, bpa=4.16 degrees
! Estimated noise=7.81222 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.010044 Jy
! Component: 100  -  total flux cleaned = -0.0123364 Jy
! Component: 150  -  total flux cleaned = -0.0127959 Jy
! Component: 200  -  total flux cleaned = -0.0127702 Jy
! Total flux subtracted in 200 components = -0.0127702 Jy
! Clean residual min=-0.002628 max=0.002288 Jy/beam
! Clean residual mean=-0.000003 rms=0.000579 Jy/beam
! Combined flux in latest and established models = 0.0678449 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 36 components and 0.067845 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056801Jy  sigma=0.073912
! Fit after  self-cal, rms=0.056799Jy  sigma=0.073896
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00029037 Jy
! Component: 100  -  total flux cleaned = 0.000308285 Jy
! Component: 150  -  total flux cleaned = 0.000323028 Jy
! Component: 200  -  total flux cleaned = 0.000324165 Jy
! Total flux subtracted in 200 components = 0.000324165 Jy
! Clean residual min=-0.002558 max=0.002284 Jy/beam
! Clean residual mean=-0.000002 rms=0.000579 Jy/beam
! Combined flux in latest and established models = 0.0681691 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 44 components and 0.0681691 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056734Jy  sigma=0.073954
! Fit after  self-cal, rms=0.056739Jy  sigma=0.073949
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056739Jy  sigma=0.073949
! Fit after  self-cal, rms=0.049115Jy  sigma=0.072012
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8656 mas, bmaj=2.6 mas, bpa=4.435 degrees
! Estimated noise=6.24517 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00787544 Jy
! Component: 100  -  total flux cleaned = -0.00995329 Jy
! Component: 150  -  total flux cleaned = -0.0109079 Jy
! Component: 200  -  total flux cleaned = -0.0112191 Jy
! Total flux subtracted in 200 components = -0.0112191 Jy
! Clean residual min=-0.002040 max=0.001801 Jy/beam
! Clean residual mean=-0.000002 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.05695 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 47 components and 0.05695 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.045553Jy  sigma=0.073923
! Fit after  self-cal, rms=0.045551Jy  sigma=0.073906
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000168199 Jy
! Component: 100  -  total flux cleaned = 0.000180294 Jy
! Component: 150  -  total flux cleaned = 0.000180202 Jy
! Component: 200  -  total flux cleaned = 0.000189138 Jy
! Total flux subtracted in 200 components = 0.000189138 Jy
! Clean residual min=-0.002047 max=0.001785 Jy/beam
! Clean residual mean=-0.000002 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.0571391 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 48 components and 0.0571391 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.045519Jy  sigma=0.073937
! Fit after  self-cal, rms=0.045521Jy  sigma=0.073932
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.045521Jy  sigma=0.073932
! Fit after  self-cal, rms=0.039566Jy  sigma=0.072024
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.178 mas, bmaj=3.256 mas, bpa=20.92 degrees
! Estimated noise=6.88699 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00720507 Jy
! Component: 100  -  total flux cleaned = -0.00880189 Jy
! Component: 150  -  total flux cleaned = -0.00912195 Jy
! Component: 200  -  total flux cleaned = -0.00912994 Jy
! Total flux subtracted in 200 components = -0.00912994 Jy
! Clean residual min=-0.001623 max=0.001956 Jy/beam
! Clean residual mean=-0.000002 rms=0.000529 Jy/beam
! Combined flux in latest and established models = 0.0480092 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 53 components and 0.0480092 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.036579Jy  sigma=0.074363
! Fit after  self-cal, rms=0.036552Jy  sigma=0.074299
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000101924 Jy
! Component: 100  -  total flux cleaned = 0.000102888 Jy
! Component: 150  -  total flux cleaned = 9.48297e-05 Jy
! Component: 200  -  total flux cleaned = 9.15228e-05 Jy
! Total flux subtracted in 200 components = 9.15228e-05 Jy
! Clean residual min=-0.001597 max=0.001887 Jy/beam
! Clean residual mean=-0.000002 rms=0.000525 Jy/beam
! Combined flux in latest and established models = 0.0481007 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 58 components and 0.0481007 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.036544Jy  sigma=0.074326
! Fit after  self-cal, rms=0.036542Jy  sigma=0.074323
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8547 mas, bmaj=2.601 mas, bpa=4.708 degrees
! Estimated noise=5.00499 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8547 x 2.601 at 4.708 degrees (North through East)
! Clean map  min=-0.0014584  max=0.033122 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6985 mas, bmaj=2.573 mas, bpa=5.764 degrees
! Estimated noise=8.69593 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0218701 Jy
! Component: 100  -  total flux cleaned = 0.0300666 Jy
! Component: 150  -  total flux cleaned = 0.0350512 Jy
! Component: 200  -  total flux cleaned = 0.038332 Jy
! Total flux subtracted in 200 components = 0.038332 Jy
! Clean residual min=-0.002862 max=0.002637 Jy/beam
! Clean residual mean=-0.000004 rms=0.000631 Jy/beam
! Combined flux in latest and established models = 0.038332 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.038332 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8547 mas, bmaj=2.601 mas, bpa=4.708 degrees
! Estimated noise=5.00499 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00369757 Jy
! Component: 100  -  total flux cleaned = 0.00559133 Jy
! Component: 150  -  total flux cleaned = 0.00683658 Jy
! Component: 200  -  total flux cleaned = 0.00768579 Jy
! Total flux subtracted in 200 components = 0.00768579 Jy
! Clean residual min=-0.001696 max=0.001576 Jy/beam
! Clean residual mean=-0.000003 rms=0.000394 Jy/beam
! Combined flux in latest and established models = 0.0460178 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 29 components and 0.0460178 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.178 mas, bmaj=3.256 mas, bpa=20.92 degrees
! Estimated noise=6.88699 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122303 Jy
! Component: 100  -  total flux cleaned = 0.00170714 Jy
! Component: 150  -  total flux cleaned = 0.00191168 Jy
! Component: 200  -  total flux cleaned = 0.00194088 Jy
! Total flux subtracted in 200 components = 0.00194088 Jy
! Clean residual min=-0.001577 max=0.001912 Jy/beam
! Clean residual mean=-0.000002 rms=0.000529 Jy/beam
! Combined flux in latest and established models = 0.0479586 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.56974e-05 Jy
! Component: 100  -  total flux cleaned = 2.62822e-05 Jy
! Component: 150  -  total flux cleaned = 3.28634e-05 Jy
! Component: 200  -  total flux cleaned = 3.60321e-05 Jy
! Total flux subtracted in 200 components = 3.60321e-05 Jy
! Clean residual min=-0.001579 max=0.001916 Jy/beam
! Clean residual mean=-0.000002 rms=0.000528 Jy/beam
! Combined flux in latest and established models = 0.0479947 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 37 components and 0.0479947 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8547 mas, bmaj=2.601 mas, bpa=4.708 degrees
! Estimated noise=5.00499 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000264338 Jy
! Component: 100  -  total flux cleaned = -0.00026253 Jy
! Component: 150  -  total flux cleaned = -0.000261979 Jy
! Component: 200  -  total flux cleaned = -0.00027121 Jy
! Total flux subtracted in 200 components = -0.00027121 Jy
! Clean residual min=-0.001577 max=0.001469 Jy/beam
! Clean residual mean=-0.000001 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.0477235 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 53 components and 0.0477235 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.036654Jy  sigma=0.074041
! Fit after  self-cal, rms=0.036676Jy  sigma=0.074030
wmodel /g0/scr/pima/npcsb_uvs/J1705+7756_X_map.mod
! Writing 53 model components to file: /g0/scr/pima/npcsb_uvs/J1705+7756_X_map.mod
wobs /g0/scr/pima/npcsb_uvs/J1705+7756_X_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1705+7756_X_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J1705+7756_X_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsb_uvs/J1705+7756_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000158853 Jy
! Component: 100  -  total flux cleaned = 7.17553e-05 Jy
! Component: 150  -  total flux cleaned = 7.23263e-05 Jy
! Component: 200  -  total flux cleaned = 9.55127e-05 Jy
! Component: 250  -  total flux cleaned = 0.000139899 Jy
! Component: 300  -  total flux cleaned = 0.000182731 Jy
! Component: 350  -  total flux cleaned = 0.000161951 Jy
! Component: 400  -  total flux cleaned = 0.000182596 Jy
! Component: 450  -  total flux cleaned = 0.000143631 Jy
! Component: 500  -  total flux cleaned = 0.000161864 Jy
! Component: 550  -  total flux cleaned = 8.74565e-05 Jy
! Component: 600  -  total flux cleaned = 6.91653e-05 Jy
! Component: 650  -  total flux cleaned = 8.64747e-05 Jy
! Component: 700  -  total flux cleaned = 8.61908e-05 Jy
! Component: 750  -  total flux cleaned = 6.8654e-05 Jy
! Component: 800  -  total flux cleaned = 3.50956e-05 Jy
! Component: 850  -  total flux cleaned = 5.19703e-05 Jy
! Component: 900  -  total flux cleaned = 0.000116626 Jy
! Component: 950  -  total flux cleaned = 0.000148269 Jy
! Component: 1000  -  total flux cleaned = 0.000148346 Jy
! Component: 1050  -  total flux cleaned = 0.000164003 Jy
! Component: 1100  -  total flux cleaned = 0.000194505 Jy
! Component: 1150  -  total flux cleaned = 0.000239634 Jy
! Component: 1200  -  total flux cleaned = 0.000254527 Jy
! Component: 1250  -  total flux cleaned = 0.000239512 Jy
! Component: 1300  -  total flux cleaned = 0.000224722 Jy
! Component: 1350  -  total flux cleaned = 0.000153168 Jy
! Component: 1400  -  total flux cleaned = 0.000167452 Jy
! Component: 1450  -  total flux cleaned = 0.000237667 Jy
! Component: 1500  -  total flux cleaned = 0.000209945 Jy
! Component: 1550  -  total flux cleaned = 0.00026496 Jy
! Component: 1600  -  total flux cleaned = 0.000333169 Jy
! Component: 1650  -  total flux cleaned = 0.000332923 Jy
! Component: 1700  -  total flux cleaned = 0.000279151 Jy
! Component: 1750  -  total flux cleaned = 0.000279156 Jy
! Component: 1800  -  total flux cleaned = 0.00019975 Jy
! Component: 1850  -  total flux cleaned = 0.000199558 Jy
! Component: 1900  -  total flux cleaned = 0.00014767 Jy
! Component: 1950  -  total flux cleaned = 0.000108959 Jy
! Component: 2000  -  total flux cleaned = 8.33537e-05 Jy
! Component: 2050  -  total flux cleaned = 1.97211e-05 Jy
! Component: 2100  -  total flux cleaned = -5.64812e-06 Jy
! Component: 2150  -  total flux cleaned = 1.93252e-05 Jy
! Component: 2200  -  total flux cleaned = -9.25102e-05 Jy
! Component: 2250  -  total flux cleaned = -0.000129542 Jy
! Component: 2300  -  total flux cleaned = -0.000178495 Jy
! Component: 2350  -  total flux cleaned = -0.000190611 Jy
! Component: 2400  -  total flux cleaned = -0.000202551 Jy
! Component: 2450  -  total flux cleaned = -0.000238578 Jy
! Component: 2500  -  total flux cleaned = -0.000286282 Jy
! Component: 2550  -  total flux cleaned = -0.000321776 Jy
! Component: 2600  -  total flux cleaned = -0.000298345 Jy
! Component: 2650  -  total flux cleaned = -0.000321675 Jy
! Component: 2700  -  total flux cleaned = -0.000402889 Jy
! Component: 2750  -  total flux cleaned = -0.000391394 Jy
! Component: 2800  -  total flux cleaned = -0.000448677 Jy
! Component: 2850  -  total flux cleaned = -0.000471492 Jy
! Component: 2900  -  total flux cleaned = -0.000516748 Jy
! Component: 2950  -  total flux cleaned = -0.000550452 Jy
! Component: 3000  -  total flux cleaned = -0.000583884 Jy
! Component: 3050  -  total flux cleaned = -0.000617271 Jy
! Component: 3100  -  total flux cleaned = -0.000672383 Jy
! Component: 3150  -  total flux cleaned = -0.000694259 Jy
! Component: 3200  -  total flux cleaned = -0.000705273 Jy
! Component: 3250  -  total flux cleaned = -0.000748709 Jy
! Component: 3300  -  total flux cleaned = -0.00081351 Jy
! Component: 3350  -  total flux cleaned = -0.000845602 Jy
! Component: 3400  -  total flux cleaned = -0.000877548 Jy
! Component: 3450  -  total flux cleaned = -0.000909422 Jy
! Component: 3500  -  total flux cleaned = -0.000951677 Jy
! Component: 3550  -  total flux cleaned = -0.000972546 Jy
! Component: 3600  -  total flux cleaned = -0.00103518 Jy
! Component: 3650  -  total flux cleaned = -0.00108723 Jy
! Component: 3700  -  total flux cleaned = -0.0011493 Jy
! Component: 3750  -  total flux cleaned = -0.00120076 Jy
! Component: 3800  -  total flux cleaned = -0.00121107 Jy
! Component: 3850  -  total flux cleaned = -0.00124168 Jy
! Component: 3900  -  total flux cleaned = -0.00123153 Jy
! Component: 3950  -  total flux cleaned = -0.0012518 Jy
! Component: 4000  -  total flux cleaned = -0.00132236 Jy
! Component: 4050  -  total flux cleaned = -0.00137254 Jy
! Total flux subtracted in 4096 components = -0.00143253 Jy
! Clean residual min=-0.000661 max=0.000607 Jy/beam
! Clean residual mean=-0.000001 rms=0.000176 Jy/beam
! Combined flux in latest and established models = 0.0462909 Jy
keep
! Adding 296 model components to the UV plane model.
! The established model now contains 349 components and 0.0462909 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J1705+7756_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8547 x 2.601 at 4.708 degrees (North through East)
! Clean map  min=-0.0011117  max=0.032966 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1705+7756_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0329656 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000174266 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.58589 1.58589 3.17178 6.34356 12.6871 25.3742 50.7485
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0005 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.032 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J1705+7756_X_uvs.log closed on Sat Oct  5 18:54:13 2013