! Started logfile: /g0/scr/pima/npcsb_uvs/J1705+7756_S_uvs.log on Sat Oct 5 19:00:11 2013 obs /g0/scr/pima/npcsb_uvs/J1705+7756_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1705+7756_S_uva.fits ! AN table 1: 47 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.884161 visibilities/baseline/integration-bin. ! Found source: J1705+7756 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 7480 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1705+7756_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.005503Jy sigma=0.961211 ! Fit after self-cal, rms=0.916461Jy sigma=0.824358 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.893 mas, bmaj=9.484 mas, bpa=6.125 degrees ! Estimated noise=20.4694 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0851084 Jy ! Component: 100 - total flux cleaned = 0.104426 Jy ! Total flux subtracted in 100 components = 0.104426 Jy ! Clean residual min=-0.008671 max=0.010227 Jy/beam ! Clean residual mean=-0.000005 rms=0.002371 Jy/beam ! Combined flux in latest and established models = 0.104426 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.104426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098752Jy sigma=0.098638 ! Fit after self-cal, rms=0.098412Jy sigma=0.098413 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.605 mas, bmaj=10.16 mas, bpa=4.293 degrees ! Estimated noise=9.61552 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0154367 Jy ! Component: 100 - total flux cleaned = 0.0226068 Jy ! Component: 150 - total flux cleaned = 0.0266082 Jy ! Component: 200 - total flux cleaned = 0.0291054 Jy ! Total flux subtracted in 200 components = 0.0291054 Jy ! Clean residual min=-0.006387 max=0.007013 Jy/beam ! Clean residual mean=-0.000001 rms=0.001512 Jy/beam ! Combined flux in latest and established models = 0.133532 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 29 components and 0.133532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099992Jy sigma=0.093078 ! Fit after self-cal, rms=0.099950Jy sigma=0.093025 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.91 HN 0.83 KP 0.93 ! LA 0.98 MK 0.83 NL 1.10 OV 0.92 ! PT 1.00 SC 0.81 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 HN 0.86 KP 0.86 ! LA 0.96 MK 0.90 NL 1.01 OV 1.02 ! PT 0.97 SC 0.83 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.94 HN 0.85 KP 0.89 ! LA 0.75 MK 1.00 NL 1.19 OV 1.00 ! PT 1.02 SC 0.81 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.93 HN 0.73 KP 0.89 ! LA 0.64 MK 0.99 NL 1.05 OV 0.80 ! PT 0.99 SC 0.91 ! ! ! Fit before self-cal, rms=0.099950Jy sigma=0.093025 ! Fit after self-cal, rms=0.088251Jy sigma=0.087737 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.548 mas, bmaj=10.08 mas, bpa=3.667 degrees ! Estimated noise=8.00489 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0144228 Jy ! Component: 100 - total flux cleaned = -0.0168351 Jy ! Component: 150 - total flux cleaned = -0.0168977 Jy ! Component: 200 - total flux cleaned = -0.0168991 Jy ! Total flux subtracted in 200 components = -0.0168991 Jy ! Clean residual min=-0.002861 max=0.003907 Jy/beam ! Clean residual mean=0.000000 rms=0.000738 Jy/beam ! Combined flux in latest and established models = 0.116633 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 32 components and 0.116633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081443Jy sigma=0.090045 ! Fit after self-cal, rms=0.081672Jy sigma=0.089920 ! Inverting map ! Added new window around map position (-21, -13.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0030533 Jy ! Component: 100 - total flux cleaned = 0.00383781 Jy ! Component: 150 - total flux cleaned = 0.00418237 Jy ! Component: 200 - total flux cleaned = 0.00437993 Jy ! Total flux subtracted in 200 components = 0.00437993 Jy ! Clean residual min=-0.002444 max=0.002739 Jy/beam ! Clean residual mean=0.000001 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.121012 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 49 components and 0.121012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081480Jy sigma=0.089740 ! Fit after self-cal, rms=0.081465Jy sigma=0.089712 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081465Jy sigma=0.089712 ! Fit after self-cal, rms=0.074396Jy sigma=0.087338 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.513 mas, bmaj=10.06 mas, bpa=3.562 degrees ! Estimated noise=6.79067 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0119828 Jy ! Component: 100 - total flux cleaned = -0.0139404 Jy ! Component: 150 - total flux cleaned = -0.0136733 Jy ! Component: 200 - total flux cleaned = -0.0135508 Jy ! Total flux subtracted in 200 components = -0.0135508 Jy ! Clean residual min=-0.002098 max=0.002396 Jy/beam ! Clean residual mean=0.000000 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.107462 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 64 components and 0.107462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068858Jy sigma=0.089588 ! Fit after self-cal, rms=0.068866Jy sigma=0.089578 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (58, -68.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010761 Jy ! Component: 100 - total flux cleaned = 0.00158216 Jy ! Component: 150 - total flux cleaned = 0.00200345 Jy ! Component: 200 - total flux cleaned = 0.00208212 Jy ! Total flux subtracted in 200 components = 0.00208212 Jy ! Clean residual min=-0.001898 max=0.001937 Jy/beam ! Clean residual mean=0.000001 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.109544 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 84 components and 0.109544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068777Jy sigma=0.089447 ! Fit after self-cal, rms=0.068771Jy sigma=0.089432 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068771Jy sigma=0.089432 ! Fit after self-cal, rms=0.062926Jy sigma=0.087166 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.489 mas, bmaj=10.04 mas, bpa=3.531 degrees ! Estimated noise=5.77823 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00997878 Jy ! Component: 100 - total flux cleaned = -0.0122649 Jy ! Component: 150 - total flux cleaned = -0.012739 Jy ! Component: 200 - total flux cleaned = -0.012831 Jy ! Total flux subtracted in 200 components = -0.012831 Jy ! Clean residual min=-0.001660 max=0.001692 Jy/beam ! Clean residual mean=0.000000 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.0967128 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 108 components and 0.0967129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058378Jy sigma=0.089373 ! Fit after self-cal, rms=0.058375Jy sigma=0.089365 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.95077e-05 Jy ! Component: 100 - total flux cleaned = 1.66021e-05 Jy ! Component: 150 - total flux cleaned = -3.52645e-05 Jy ! Component: 200 - total flux cleaned = -0.000109249 Jy ! Total flux subtracted in 200 components = -0.000109249 Jy ! Clean residual min=-0.001669 max=0.001683 Jy/beam ! Clean residual mean=0.000000 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.0966036 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 119 components and 0.0966036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058318Jy sigma=0.089369 ! Fit after self-cal, rms=0.058319Jy sigma=0.089368 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058319Jy sigma=0.089368 ! Fit after self-cal, rms=0.053471Jy sigma=0.087146 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.218 mas, bmaj=11.56 mas, bpa=4.553 degrees ! Estimated noise=6.11109 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00897836 Jy ! Component: 100 - total flux cleaned = -0.0109798 Jy ! Component: 150 - total flux cleaned = -0.0115915 Jy ! Component: 200 - total flux cleaned = -0.0118323 Jy ! Total flux subtracted in 200 components = -0.0118323 Jy ! Clean residual min=-0.001765 max=0.001786 Jy/beam ! Clean residual mean=0.000002 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.0847713 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 133 components and 0.0847713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049545Jy sigma=0.089597 ! Fit after self-cal, rms=0.049537Jy sigma=0.089585 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000115317 Jy ! Component: 100 - total flux cleaned = -0.000323783 Jy ! Component: 150 - total flux cleaned = -0.000488587 Jy ! Component: 200 - total flux cleaned = -0.000636419 Jy ! Total flux subtracted in 200 components = -0.000636419 Jy ! Clean residual min=-0.001741 max=0.001651 Jy/beam ! Clean residual mean=0.000001 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.0841349 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 142 components and 0.0841349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049503Jy sigma=0.089623 ! Fit after self-cal, rms=0.049502Jy sigma=0.089620 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.462 mas, bmaj=10.02 mas, bpa=3.612 degrees ! Estimated noise=4.92401 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.462 x 10.02 at 3.612 degrees (North through East) ! Clean map min=-0.0019491 max=0.060842 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.825 mas, bmaj=9.346 mas, bpa=5.563 degrees ! Estimated noise=10.0968 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0417741 Jy ! Component: 100 - total flux cleaned = 0.053001 Jy ! Component: 150 - total flux cleaned = 0.0596844 Jy ! Component: 200 - total flux cleaned = 0.0640264 Jy ! Total flux subtracted in 200 components = 0.0640264 Jy ! Clean residual min=-0.003649 max=0.004663 Jy/beam ! Clean residual mean=-0.000001 rms=0.000989 Jy/beam ! Combined flux in latest and established models = 0.0640264 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0640264 Jy ! Inverting map and beam ! Estimated beam: bmin=3.462 mas, bmaj=10.02 mas, bpa=3.612 degrees ! Estimated noise=4.92401 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00614233 Jy ! Component: 100 - total flux cleaned = 0.00939542 Jy ! Component: 150 - total flux cleaned = 0.0111554 Jy ! Component: 200 - total flux cleaned = 0.0126832 Jy ! Total flux subtracted in 200 components = 0.0126832 Jy ! Clean residual min=-0.001945 max=0.002120 Jy/beam ! Clean residual mean=0.000002 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.0767096 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 55 components and 0.0767095 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.218 mas, bmaj=11.56 mas, bpa=4.553 degrees ! Estimated noise=6.11109 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00285972 Jy ! Component: 100 - total flux cleaned = 0.00440351 Jy ! Component: 150 - total flux cleaned = 0.00492143 Jy ! Component: 200 - total flux cleaned = 0.00515856 Jy ! Total flux subtracted in 200 components = 0.00515856 Jy ! Clean residual min=-0.001915 max=0.001757 Jy/beam ! Clean residual mean=0.000003 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.0818681 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000235751 Jy ! Component: 100 - total flux cleaned = 0.000446732 Jy ! Component: 150 - total flux cleaned = 0.000638225 Jy ! Component: 200 - total flux cleaned = 0.00072688 Jy ! Total flux subtracted in 200 components = 0.00072688 Jy ! Clean residual min=-0.001776 max=0.001745 Jy/beam ! Clean residual mean=0.000002 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.082595 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 111 components and 0.082595 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.462 mas, bmaj=10.02 mas, bpa=3.612 degrees ! Estimated noise=4.92401 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000472855 Jy ! Component: 100 - total flux cleaned = 0.000651669 Jy ! Component: 150 - total flux cleaned = 0.000877334 Jy ! Component: 200 - total flux cleaned = 0.000911462 Jy ! Total flux subtracted in 200 components = 0.000911462 Jy ! Clean residual min=-0.001474 max=0.001475 Jy/beam ! Clean residual mean=0.000000 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.0835065 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 130 components and 0.0835065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049513Jy sigma=0.089786 ! Fit after self-cal, rms=0.049504Jy sigma=0.089769 wmodel /g0/scr/pima/npcsb_uvs/J1705+7756_S_map.mod ! Writing 130 model components to file: /g0/scr/pima/npcsb_uvs/J1705+7756_S_map.mod wobs /g0/scr/pima/npcsb_uvs/J1705+7756_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1705+7756_S_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J1705+7756_S_map.win ! wwins: Wrote 3 windows to /g0/scr/pima/npcsb_uvs/J1705+7756_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000269024 Jy ! Component: 100 - total flux cleaned = -0.000544468 Jy ! Component: 150 - total flux cleaned = -0.000804925 Jy ! Component: 200 - total flux cleaned = -0.0010996 Jy ! Component: 250 - total flux cleaned = -0.0013823 Jy ! Component: 300 - total flux cleaned = -0.00157074 Jy ! Component: 350 - total flux cleaned = -0.00173207 Jy ! Component: 400 - total flux cleaned = -0.00173221 Jy ! Component: 450 - total flux cleaned = -0.00190492 Jy ! Component: 500 - total flux cleaned = -0.0020352 Jy ! Component: 550 - total flux cleaned = -0.00218055 Jy ! Component: 600 - total flux cleaned = -0.00232247 Jy ! Component: 650 - total flux cleaned = -0.00240948 Jy ! Component: 700 - total flux cleaned = -0.00254646 Jy ! Component: 750 - total flux cleaned = -0.0026466 Jy ! Component: 800 - total flux cleaned = -0.0027289 Jy ! Component: 850 - total flux cleaned = -0.00284176 Jy ! Component: 900 - total flux cleaned = -0.00288882 Jy ! Component: 950 - total flux cleaned = -0.00295133 Jy ! Component: 1000 - total flux cleaned = -0.00304336 Jy ! Component: 1050 - total flux cleaned = -0.00310454 Jy ! Component: 1100 - total flux cleaned = -0.00323923 Jy ! Component: 1150 - total flux cleaned = -0.00335694 Jy ! Component: 1200 - total flux cleaned = -0.00345834 Jy ! Component: 1250 - total flux cleaned = -0.00351509 Jy ! Component: 1300 - total flux cleaned = -0.00357124 Jy ! Component: 1350 - total flux cleaned = -0.00358508 Jy ! Component: 1400 - total flux cleaned = -0.00361278 Jy ! Component: 1450 - total flux cleaned = -0.00364027 Jy ! Component: 1500 - total flux cleaned = -0.00369405 Jy ! Component: 1550 - total flux cleaned = -0.00374711 Jy ! Component: 1600 - total flux cleaned = -0.0037339 Jy ! Component: 1650 - total flux cleaned = -0.00378577 Jy ! Component: 1700 - total flux cleaned = -0.00379834 Jy ! Component: 1750 - total flux cleaned = -0.00379826 Jy ! Component: 1800 - total flux cleaned = -0.00377304 Jy ! Component: 1850 - total flux cleaned = -0.00377293 Jy ! Component: 1900 - total flux cleaned = -0.00373592 Jy ! Component: 1950 - total flux cleaned = -0.00372384 Jy ! Component: 2000 - total flux cleaned = -0.0036996 Jy ! Component: 2050 - total flux cleaned = -0.00369961 Jy ! Component: 2100 - total flux cleaned = -0.00368771 Jy ! Component: 2150 - total flux cleaned = -0.00365234 Jy ! Component: 2200 - total flux cleaned = -0.00362886 Jy ! Component: 2250 - total flux cleaned = -0.00362898 Jy ! Component: 2300 - total flux cleaned = -0.00360592 Jy ! Component: 2350 - total flux cleaned = -0.00356023 Jy ! Component: 2400 - total flux cleaned = -0.00352623 Jy ! Component: 2450 - total flux cleaned = -0.00352637 Jy ! Component: 2500 - total flux cleaned = -0.00349256 Jy ! Component: 2550 - total flux cleaned = -0.00344789 Jy ! Component: 2600 - total flux cleaned = -0.00341468 Jy ! Component: 2650 - total flux cleaned = -0.00340362 Jy ! Component: 2700 - total flux cleaned = -0.00335993 Jy ! Component: 2750 - total flux cleaned = -0.00337064 Jy ! Component: 2800 - total flux cleaned = -0.00333834 Jy ! Component: 2850 - total flux cleaned = -0.0032955 Jy ! Component: 2900 - total flux cleaned = -0.00330607 Jy ! Component: 2950 - total flux cleaned = -0.00325329 Jy ! Component: 3000 - total flux cleaned = -0.00323231 Jy ! Component: 3050 - total flux cleaned = -0.00324262 Jy ! Component: 3100 - total flux cleaned = -0.00319073 Jy ! Component: 3150 - total flux cleaned = -0.0031701 Jy ! Component: 3200 - total flux cleaned = -0.00312919 Jy ! Component: 3250 - total flux cleaned = -0.00314948 Jy ! Component: 3300 - total flux cleaned = -0.00307871 Jy ! Component: 3350 - total flux cleaned = -0.00305859 Jy ! Component: 3400 - total flux cleaned = -0.00302872 Jy ! Component: 3450 - total flux cleaned = -0.00298902 Jy ! Component: 3500 - total flux cleaned = -0.00294952 Jy ! Component: 3550 - total flux cleaned = -0.00290052 Jy ! Component: 3600 - total flux cleaned = -0.00286154 Jy ! Component: 3650 - total flux cleaned = -0.00286158 Jy ! Component: 3700 - total flux cleaned = -0.00285185 Jy ! Component: 3750 - total flux cleaned = -0.00281344 Jy ! Component: 3800 - total flux cleaned = -0.00275618 Jy ! Component: 3850 - total flux cleaned = -0.00275621 Jy ! Component: 3900 - total flux cleaned = -0.00276567 Jy ! Component: 3950 - total flux cleaned = -0.0027469 Jy ! Component: 4000 - total flux cleaned = -0.00270946 Jy ! Component: 4050 - total flux cleaned = -0.00270943 Jy ! Total flux subtracted in 4096 components = -0.00267238 Jy ! Clean residual min=-0.000517 max=0.000565 Jy/beam ! Clean residual mean=-0.000000 rms=0.000175 Jy/beam ! Combined flux in latest and established models = 0.0808341 Jy keep ! Adding 300 model components to the UV plane model. ! The established model now contains 430 components and 0.0808341 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J1705+7756_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.462 x 10.02 at 3.612 degrees (North through East) ! Clean map min=-0.0013424 max=0.060283 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1705+7756_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0602832 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000172545 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.858673 0.858673 1.71735 3.43469 6.86939 13.7388 27.4775 54.9551 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.06 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J1705+7756_S_uvs.log closed on Sat Oct 5 19:00:15 2013