! Started logfile: /g0/scr/pima/npcsb_uvs/J1632+8232_X_uvs.log on Sat Oct  5 18:53:59 2013
obs /g0/scr/pima/npcsb_uvs/J1632+8232_X_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1632+8232_X_uva.fits
! AN table 1: 46 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.9 visibilities/baseline/integration-bin.
! Found source: J1632+8232
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1656 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1632+8232_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.003373Jy  sigma=0.730529
! Fit after  self-cal, rms=0.954939Jy  sigma=0.666004
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.718 mas, bmaj=11.89 mas, bpa=13.74 degrees
! Estimated noise=45.2023 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0512587 Jy
! Component: 100  -  total flux cleaned = 0.0639791 Jy
! Total flux subtracted in 100 components = 0.0639791 Jy
! Clean residual min=-0.005826 max=0.005896 Jy/beam
! Clean residual mean=0.000013 rms=0.002330 Jy/beam
! Combined flux in latest and established models = 0.0639791 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.0639791 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064088Jy  sigma=0.050992
! Fit after  self-cal, rms=0.062450Jy  sigma=0.050176
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.987 mas, bmaj=11.17 mas, bpa=17.71 degrees
! Estimated noise=27.0457 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00854087 Jy
! Component: 100  -  total flux cleaned = 0.00919132 Jy
! Component: 150  -  total flux cleaned = 0.00978645 Jy
! Component: 200  -  total flux cleaned = 0.010133 Jy
! Total flux subtracted in 200 components = 0.010133 Jy
! Clean residual min=-0.001725 max=0.001717 Jy/beam
! Clean residual mean=-0.000000 rms=0.000670 Jy/beam
! Combined flux in latest and established models = 0.0741121 Jy
! Performing phase self-cal
! Adding 64 model components to the UV plane model.
! The established model now contains 76 components and 0.0741121 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064071Jy  sigma=0.047361
! Fit after  self-cal, rms=0.063883Jy  sigma=0.047269
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.88     KP        0.99     LA        0.87     OV        0.87     
!   PT        0.82     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     KP        0.88     LA        0.97     OV        0.90     
!   PT        0.84     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.86     KP        0.90     LA        0.77     OV        0.98     
!   PT        0.94     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.92     KP        0.77     LA        0.91     OV        0.88     
!   PT        0.95     
! 
! 
! Fit before self-cal, rms=0.063883Jy  sigma=0.047269
! Fit after  self-cal, rms=0.056438Jy  sigma=0.044621
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.004 mas, bmaj=11.1 mas, bpa=17.6 degrees
! Estimated noise=21.2071 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0107958 Jy
! Component: 100  -  total flux cleaned = -0.0121655 Jy
! Component: 150  -  total flux cleaned = -0.0126944 Jy
! Component: 200  -  total flux cleaned = -0.0129163 Jy
! Total flux subtracted in 200 components = -0.0129163 Jy
! Clean residual min=-0.000836 max=0.000832 Jy/beam
! Clean residual mean=0.000001 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.0611958 Jy
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 127 components and 0.0611958 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050662Jy  sigma=0.046164
! Fit after  self-cal, rms=0.050748Jy  sigma=0.046102
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050748Jy  sigma=0.046102
! Fit after  self-cal, rms=0.045837Jy  sigma=0.044423
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.018 mas, bmaj=11.11 mas, bpa=17.48 degrees
! Estimated noise=17.1814 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00868684 Jy
! Component: 100  -  total flux cleaned = -0.01043 Jy
! Component: 150  -  total flux cleaned = -0.0107952 Jy
! Component: 200  -  total flux cleaned = -0.0109529 Jy
! Total flux subtracted in 200 components = -0.0109529 Jy
! Clean residual min=-0.000602 max=0.000602 Jy/beam
! Clean residual mean=-0.000000 rms=0.000231 Jy/beam
! Combined flux in latest and established models = 0.0502429 Jy
selfcal
! Performing phase self-cal
! Adding 59 model components to the UV plane model.
! The established model now contains 183 components and 0.0502429 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.041223Jy  sigma=0.045986
! Fit after  self-cal, rms=0.041224Jy  sigma=0.045965
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000504348 Jy
! Component: 100  -  total flux cleaned = -0.000619281 Jy
! Component: 150  -  total flux cleaned = -0.000688934 Jy
! Component: 200  -  total flux cleaned = -0.000920142 Jy
! Total flux subtracted in 200 components = -0.000920142 Jy
! Clean residual min=-0.000537 max=0.000536 Jy/beam
! Clean residual mean=-0.000001 rms=0.000199 Jy/beam
! Combined flux in latest and established models = 0.0493228 Jy
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 243 components and 0.0493227 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.041122Jy  sigma=0.045953
! Fit after  self-cal, rms=0.041107Jy  sigma=0.045940
! Inverting map 
! Added new window around map position (29.2, -36.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000145454 Jy
! Component: 100  -  total flux cleaned = -0.000207737 Jy
! Component: 150  -  total flux cleaned = -0.000452915 Jy
! Component: 200  -  total flux cleaned = -0.000497992 Jy
! Total flux subtracted in 200 components = -0.000497992 Jy
! Clean residual min=-0.000869 max=0.000801 Jy/beam
! Clean residual mean=-0.000000 rms=0.000224 Jy/beam
! Combined flux in latest and established models = 0.0488248 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 278 components and 0.0488248 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.041055Jy  sigma=0.045934
! Fit after  self-cal, rms=0.041054Jy  sigma=0.045918
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.041054Jy  sigma=0.045918
! Fit after  self-cal, rms=0.036823Jy  sigma=0.044127
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.022 mas, bmaj=11.15 mas, bpa=17.38 degrees
! Estimated noise=13.7827 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00552828 Jy
! Component: 100  -  total flux cleaned = -0.00753013 Jy
! Component: 150  -  total flux cleaned = -0.00841148 Jy
! Component: 200  -  total flux cleaned = -0.00916224 Jy
! Total flux subtracted in 200 components = -0.00916224 Jy
! Clean residual min=-0.003967 max=0.002989 Jy/beam
! Clean residual mean=0.000008 rms=0.000875 Jy/beam
! Combined flux in latest and established models = 0.0396625 Jy
selfcal
! Performing phase self-cal
! Adding 57 model components to the UV plane model.
! The established model now contains 335 components and 0.0396625 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.034431Jy  sigma=0.045115
! Fit after  self-cal, rms=0.034329Jy  sigma=0.044813
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00179796 Jy
! Component: 100  -  total flux cleaned = -0.00221077 Jy
! Component: 150  -  total flux cleaned = -0.00244447 Jy
! Component: 200  -  total flux cleaned = -0.00269951 Jy
! Total flux subtracted in 200 components = -0.00269951 Jy
! Clean residual min=-0.001960 max=0.001573 Jy/beam
! Clean residual mean=0.000006 rms=0.000529 Jy/beam
! Combined flux in latest and established models = 0.036963 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 384 components and 0.036963 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.033756Jy  sigma=0.045295
! Fit after  self-cal, rms=0.033732Jy  sigma=0.045240
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.033732Jy  sigma=0.045240
! Fit after  self-cal, rms=0.031243Jy  sigma=0.044094
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.207 mas, bmaj=10.99 mas, bpa=17.17 degrees
! Estimated noise=11.644 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0041144 Jy
! Component: 100  -  total flux cleaned = -0.00543899 Jy
! Component: 150  -  total flux cleaned = -0.00620369 Jy
! Component: 200  -  total flux cleaned = -0.00681658 Jy
! Total flux subtracted in 200 components = -0.00681658 Jy
! Clean residual min=-0.003688 max=0.002848 Jy/beam
! Clean residual mean=0.000010 rms=0.000886 Jy/beam
! Combined flux in latest and established models = 0.0301464 Jy
selfcal
! Performing phase self-cal
! Adding 64 model components to the UV plane model.
! The established model now contains 430 components and 0.0301465 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.029672Jy  sigma=0.044930
! Fit after  self-cal, rms=0.029610Jy  sigma=0.044646
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00131833 Jy
! Component: 100  -  total flux cleaned = -0.00170942 Jy
! Component: 150  -  total flux cleaned = -0.00200932 Jy
! Component: 200  -  total flux cleaned = -0.00232665 Jy
! Total flux subtracted in 200 components = -0.00232665 Jy
! Clean residual min=-0.002356 max=0.001991 Jy/beam
! Clean residual mean=0.000008 rms=0.000637 Jy/beam
! Combined flux in latest and established models = 0.0278198 Jy
! Performing phase self-cal
! Adding 75 model components to the UV plane model.
! The established model now contains 480 components and 0.0278198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.029184Jy  sigma=0.045034
! Fit after  self-cal, rms=0.029166Jy  sigma=0.044979
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.059 mas, bmaj=11.11 mas, bpa=17.15 degrees
! Estimated noise=11.6603 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.059 x 11.11 at 17.15 degrees (North through East)
! Clean map  min=-0.01283  max=0.036236 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.813 mas, bmaj=11.83 mas, bpa=13.15 degrees
! Estimated noise=19.0738 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.016214 Jy
! Component: 100  -  total flux cleaned = 0.0232705 Jy
! Component: 150  -  total flux cleaned = 0.0274404 Jy
! Component: 200  -  total flux cleaned = 0.0305538 Jy
! Total flux subtracted in 200 components = 0.0305538 Jy
! Clean residual min=-0.009442 max=0.013031 Jy/beam
! Clean residual mean=-0.000023 rms=0.002983 Jy/beam
! Combined flux in latest and established models = 0.0305538 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 48 model components to the UV plane model.
! The established model now contains 48 components and 0.0305538 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.059 mas, bmaj=11.11 mas, bpa=17.15 degrees
! Estimated noise=11.6603 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-41, -2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00860428 Jy
! Component: 100  -  total flux cleaned = 0.0070265 Jy
! Component: 150  -  total flux cleaned = 0.00567221 Jy
! Component: 200  -  total flux cleaned = 0.00489809 Jy
! Total flux subtracted in 200 components = 0.00489809 Jy
! Clean residual min=-0.004278 max=0.004704 Jy/beam
! Clean residual mean=0.000012 rms=0.001312 Jy/beam
! Combined flux in latest and established models = 0.0354519 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 80 components and 0.0354519 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.207 mas, bmaj=10.99 mas, bpa=17.17 degrees
! Estimated noise=11.644 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00119102 Jy
! Component: 100  -  total flux cleaned = -0.00230101 Jy
! Component: 150  -  total flux cleaned = -0.00327861 Jy
! Component: 200  -  total flux cleaned = -0.00406978 Jy
! Total flux subtracted in 200 components = -0.00406978 Jy
! Clean residual min=-0.003242 max=0.003238 Jy/beam
! Clean residual mean=0.000001 rms=0.000833 Jy/beam
! Combined flux in latest and established models = 0.0313821 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000710594 Jy
! Component: 100  -  total flux cleaned = -0.00115881 Jy
! Component: 150  -  total flux cleaned = -0.00145244 Jy
! Component: 200  -  total flux cleaned = -0.00150952 Jy
! Total flux subtracted in 200 components = -0.00150952 Jy
! Clean residual min=-0.002867 max=0.003104 Jy/beam
! Clean residual mean=-0.000002 rms=0.000660 Jy/beam
! Combined flux in latest and established models = 0.0298725 Jy
! Adding 111 model components to the UV plane model.
! The established model now contains 188 components and 0.0298725 Jy
! Inverting map 
! Added new window around map position (18.2, 49.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000798262 Jy
! Component: 100  -  total flux cleaned = 0.000303291 Jy
! Component: 150  -  total flux cleaned = -0.000138667 Jy
! Component: 200  -  total flux cleaned = -0.000544066 Jy
! Total flux subtracted in 200 components = -0.000544066 Jy
! Clean residual min=-0.001871 max=0.002209 Jy/beam
! Clean residual mean=-0.000002 rms=0.000508 Jy/beam
! Combined flux in latest and established models = 0.0293285 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 220 components and 0.0293285 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.059 mas, bmaj=11.11 mas, bpa=17.15 degrees
! Estimated noise=11.6603 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00093577 Jy
! Component: 100  -  total flux cleaned = -0.0014686 Jy
! Component: 150  -  total flux cleaned = -0.00173942 Jy
! Component: 200  -  total flux cleaned = -0.00199637 Jy
! Total flux subtracted in 200 components = -0.00199637 Jy
! Clean residual min=-0.001675 max=0.001951 Jy/beam
! Clean residual mean=-0.000002 rms=0.000459 Jy/beam
! Combined flux in latest and established models = 0.0273321 Jy
selfcal
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 267 components and 0.0273321 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.028480Jy  sigma=0.047436
! Fit after  self-cal, rms=0.028122Jy  sigma=0.046290
wmodel /g0/scr/pima/npcsb_uvs/J1632+8232_X_map.mod
! Writing 267 model components to file: /g0/scr/pima/npcsb_uvs/J1632+8232_X_map.mod
wobs /g0/scr/pima/npcsb_uvs/J1632+8232_X_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1632+8232_X_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J1632+8232_X_map.win
! wwins: Wrote 3 windows to /g0/scr/pima/npcsb_uvs/J1632+8232_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000450056 Jy
! Component: 100  -  total flux cleaned = 0.000649457 Jy
! Component: 150  -  total flux cleaned = 0.000790001 Jy
! Component: 200  -  total flux cleaned = 0.00084744 Jy
! Component: 250  -  total flux cleaned = 0.000827429 Jy
! Component: 300  -  total flux cleaned = 0.000797605 Jy
! Component: 350  -  total flux cleaned = 0.000759687 Jy
! Component: 400  -  total flux cleaned = 0.000714992 Jy
! Component: 450  -  total flux cleaned = 0.000698543 Jy
! Component: 500  -  total flux cleaned = 0.000714449 Jy
! Component: 550  -  total flux cleaned = 0.000730166 Jy
! Component: 600  -  total flux cleaned = 0.00077637 Jy
! Component: 650  -  total flux cleaned = 0.00082182 Jy
! Component: 700  -  total flux cleaned = 0.000859167 Jy
! Component: 750  -  total flux cleaned = 0.000910856 Jy
! Component: 800  -  total flux cleaned = 0.000954655 Jy
! Component: 850  -  total flux cleaned = 0.000998174 Jy
! Component: 900  -  total flux cleaned = 0.00101979 Jy
! Component: 950  -  total flux cleaned = 0.00101978 Jy
! Component: 1000  -  total flux cleaned = 0.00101987 Jy
! Component: 1050  -  total flux cleaned = 0.00101995 Jy
! Component: 1100  -  total flux cleaned = 0.00102724 Jy
! Component: 1150  -  total flux cleaned = 0.0010199 Jy
! Component: 1200  -  total flux cleaned = 0.00101253 Jy
! Component: 1250  -  total flux cleaned = 0.0010052 Jy
! Component: 1300  -  total flux cleaned = 0.000997724 Jy
! Component: 1350  -  total flux cleaned = 0.000982694 Jy
! Component: 1400  -  total flux cleaned = 0.000975045 Jy
! Component: 1450  -  total flux cleaned = 0.000959642 Jy
! Component: 1500  -  total flux cleaned = 0.000951816 Jy
! Component: 1550  -  total flux cleaned = 0.000951812 Jy
! Component: 1600  -  total flux cleaned = 0.000943797 Jy
! Component: 1650  -  total flux cleaned = 0.000935561 Jy
! Component: 1700  -  total flux cleaned = 0.000935538 Jy
! Component: 1750  -  total flux cleaned = 0.00093551 Jy
! Component: 1800  -  total flux cleaned = 0.000944063 Jy
! Component: 1850  -  total flux cleaned = 0.000952802 Jy
! Component: 1900  -  total flux cleaned = 0.000970449 Jy
! Component: 1950  -  total flux cleaned = 0.000979369 Jy
! Component: 2000  -  total flux cleaned = 0.000997469 Jy
! Component: 2050  -  total flux cleaned = 0.00100676 Jy
! Component: 2100  -  total flux cleaned = 0.00100688 Jy
! Component: 2150  -  total flux cleaned = 0.00100702 Jy
! Component: 2200  -  total flux cleaned = 0.000997004 Jy
! Component: 2250  -  total flux cleaned = 0.00100727 Jy
! Component: 2300  -  total flux cleaned = 0.00101767 Jy
! Component: 2350  -  total flux cleaned = 0.00102837 Jy
! Component: 2400  -  total flux cleaned = 0.00103957 Jy
! Component: 2450  -  total flux cleaned = 0.00103959 Jy
! Component: 2500  -  total flux cleaned = 0.00105141 Jy
! Component: 2550  -  total flux cleaned = 0.00105109 Jy
! Component: 2600  -  total flux cleaned = 0.0010638 Jy
! Component: 2650  -  total flux cleaned = 0.00106381 Jy
! Component: 2700  -  total flux cleaned = 0.0010637 Jy
! Component: 2750  -  total flux cleaned = 0.00106351 Jy
! Component: 2800  -  total flux cleaned = 0.00107759 Jy
! Component: 2850  -  total flux cleaned = 0.0010925 Jy
! Component: 2900  -  total flux cleaned = 0.00109263 Jy
! Component: 2950  -  total flux cleaned = 0.00109271 Jy
! Component: 3000  -  total flux cleaned = 0.00109268 Jy
! Component: 3050  -  total flux cleaned = 0.00109289 Jy
! Component: 3100  -  total flux cleaned = 0.00107553 Jy
! Component: 3150  -  total flux cleaned = 0.00105756 Jy
! Component: 3200  -  total flux cleaned = 0.00103866 Jy
! Component: 3250  -  total flux cleaned = 0.00103877 Jy
! Component: 3300  -  total flux cleaned = 0.00101887 Jy
! Component: 3350  -  total flux cleaned = 0.000998056 Jy
! Component: 3400  -  total flux cleaned = 0.000976472 Jy
! Component: 3450  -  total flux cleaned = 0.000954099 Jy
! Component: 3500  -  total flux cleaned = 0.00093073 Jy
! Component: 3550  -  total flux cleaned = 0.000906273 Jy
! Component: 3600  -  total flux cleaned = 0.000906652 Jy
! Component: 3650  -  total flux cleaned = 0.00090674 Jy
! Component: 3700  -  total flux cleaned = 0.000880083 Jy
! Component: 3750  -  total flux cleaned = 0.000880451 Jy
! Component: 3800  -  total flux cleaned = 0.000880615 Jy
! Component: 3850  -  total flux cleaned = 0.000880975 Jy
! Component: 3900  -  total flux cleaned = 0.000880817 Jy
! Component: 3950  -  total flux cleaned = 0.000881002 Jy
! Component: 4000  -  total flux cleaned = 0.000880666 Jy
! Component: 4050  -  total flux cleaned = 0.000880759 Jy
! Total flux subtracted in 4096 components = 0.000880077 Jy
! Clean residual min=-0.002020 max=0.001969 Jy/beam
! Clean residual mean=0.000002 rms=0.000611 Jy/beam
! Combined flux in latest and established models = 0.0282122 Jy
keep
! Adding 233 model components to the UV plane model.
! The established model now contains 500 components and 0.0282122 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J1632+8232_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.059 x 11.11 at 17.15 degrees (North through East)
! Clean map  min=-0.0063988  max=0.013276 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1632+8232_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.013276 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000594865 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -13.4423 13.4423 26.8845 53.769
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0017 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.013 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J1632+8232_X_uvs.log closed on Sat Oct  5 18:54:04 2013