! Started logfile: /g0/scr/pima/npcsb_uvs/J1540+1447_X_uvs.log on Sat Oct  5 18:53:44 2013
obs /g0/scr/pima/npcsb_uvs/J1540+1447_X_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1540+1447_X_uva.fits
! AN table 1: 7 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.942857 visibilities/baseline/integration-bin.
! Found source: J1540+1447
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1188 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1540+1447_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.347743Jy  sigma=11.467391
! Fit after  self-cal, rms=0.248172Jy  sigma=1.427824
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8215 mas, bmaj=2.004 mas, bpa=-0.3487 degrees
! Estimated noise=3.37398 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.713547 Jy
! Component: 100  -  total flux cleaned = 0.908228 Jy
! Total flux subtracted in 100 components = 0.908228 Jy
! Clean residual min=-0.035496 max=0.075897 Jy/beam
! Clean residual mean=-0.000010 rms=0.010410 Jy/beam
! Combined flux in latest and established models = 0.908228 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.908228 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.174870Jy  sigma=1.453066
! Fit after  self-cal, rms=0.174427Jy  sigma=1.451005
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0782129 Jy
! Component: 100  -  total flux cleaned = 0.116429 Jy
! Total flux subtracted in 100 components = 0.116429 Jy
! Clean residual min=-0.025690 max=0.037234 Jy/beam
! Clean residual mean=-0.000005 rms=0.006103 Jy/beam
! Combined flux in latest and established models = 1.02466 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 20 components and 1.02466 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.137179Jy  sigma=0.982702
! Fit after  self-cal, rms=0.137183Jy  sigma=0.982127
! Inverting map 
! Added new window around map position (-1, 1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0337964 Jy
! Component: 100  -  total flux cleaned = 0.0526855 Jy
! Total flux subtracted in 100 components = 0.0526855 Jy
! Clean residual min=-0.023561 max=0.019184 Jy/beam
! Clean residual mean=-0.000003 rms=0.004933 Jy/beam
! Combined flux in latest and established models = 1.07734 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 31 components and 1.07734 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128233Jy  sigma=0.863211
! Fit after  self-cal, rms=0.127875Jy  sigma=0.860341
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9317 mas, bmaj=2.196 mas, bpa=0.07577 degrees
! Estimated noise=2.64777 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0192652 Jy
! Component: 100  -  total flux cleaned = 0.0319602 Jy
! Component: 150  -  total flux cleaned = 0.0408173 Jy
! Component: 200  -  total flux cleaned = 0.0470587 Jy
! Total flux subtracted in 200 components = 0.0470587 Jy
! Clean residual min=-0.020366 max=0.016140 Jy/beam
! Clean residual mean=-0.000003 rms=0.004557 Jy/beam
! Combined flux in latest and established models = 1.1244 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 54 components and 1.1244 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.125108Jy  sigma=0.817947
! Fit after  self-cal, rms=0.125048Jy  sigma=0.816847
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.07     KP        1.03     
!   LA        1.03     MK        1.01     NL        1.03     OV        1.00     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        1.02     KP        0.95     
!   LA        0.95     MK        0.95     NL        1.00     OV        0.99     
!   PT        1.04     SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.01     HN        1.04     KP        0.86     
!   LA        0.96     MK        0.99     NL        0.98     OV        1.01     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.01     KP        0.91     
!   LA        0.96     MK        1.02     NL        0.98     OV        1.03     
!   PT        1.06     SC        1.05     
! 
! 
! Fit before self-cal, rms=0.125048Jy  sigma=0.816847
! Fit after  self-cal, rms=0.112653Jy  sigma=0.633648
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9331 mas, bmaj=2.202 mas, bpa=0.1477 degrees
! Estimated noise=2.63901 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00451229 Jy
! Component: 100  -  total flux cleaned = -0.00713818 Jy
! Component: 150  -  total flux cleaned = -0.00749734 Jy
! Component: 200  -  total flux cleaned = -0.00775158 Jy
! Total flux subtracted in 200 components = -0.00775158 Jy
! Clean residual min=-0.008061 max=0.008213 Jy/beam
! Clean residual mean=-0.000005 rms=0.002005 Jy/beam
! Combined flux in latest and established models = 1.11665 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 64 components and 1.11665 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112169Jy  sigma=0.632803
! Fit after  self-cal, rms=0.112178Jy  sigma=0.632673
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112178Jy  sigma=0.632673
! Fit after  self-cal, rms=0.112094Jy  sigma=0.631799
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9341 mas, bmaj=2.204 mas, bpa=0.1484 degrees
! Estimated noise=2.63365 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00382544 Jy
! Component: 100  -  total flux cleaned = -0.00598895 Jy
! Component: 150  -  total flux cleaned = -0.00629863 Jy
! Component: 200  -  total flux cleaned = -0.00644203 Jy
! Total flux subtracted in 200 components = -0.00644203 Jy
! Clean residual min=-0.007753 max=0.008279 Jy/beam
! Clean residual mean=-0.000005 rms=0.001964 Jy/beam
! Combined flux in latest and established models = 1.11021 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 67 components and 1.11021 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111723Jy  sigma=0.631428
! Fit after  self-cal, rms=0.111718Jy  sigma=0.631396
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000256294 Jy
! Component: 100  -  total flux cleaned = -0.00032022 Jy
! Component: 150  -  total flux cleaned = -0.00038497 Jy
! Component: 200  -  total flux cleaned = -0.000386256 Jy
! Total flux subtracted in 200 components = -0.000386256 Jy
! Clean residual min=-0.007619 max=0.008259 Jy/beam
! Clean residual mean=-0.000005 rms=0.001956 Jy/beam
! Combined flux in latest and established models = 1.10982 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 70 components and 1.10982 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111557Jy  sigma=0.631059
! Fit after  self-cal, rms=0.111551Jy  sigma=0.631036
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111551Jy  sigma=0.631036
! Fit after  self-cal, rms=0.111430Jy  sigma=0.630235
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9346 mas, bmaj=2.206 mas, bpa=0.173 degrees
! Estimated noise=2.62698 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00333657 Jy
! Component: 100  -  total flux cleaned = -0.00517637 Jy
! Component: 150  -  total flux cleaned = -0.00548955 Jy
! Component: 200  -  total flux cleaned = -0.00572003 Jy
! Total flux subtracted in 200 components = -0.00572003 Jy
! Clean residual min=-0.007494 max=0.008239 Jy/beam
! Clean residual mean=-0.000005 rms=0.001926 Jy/beam
! Combined flux in latest and established models = 1.1041 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 73 components and 1.1041 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111136Jy  sigma=0.630248
! Fit after  self-cal, rms=0.111130Jy  sigma=0.630228
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-29.8, 38.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00568997 Jy
! Component: 100  -  total flux cleaned = 0.0059751 Jy
! Component: 150  -  total flux cleaned = 0.00656663 Jy
! Component: 200  -  total flux cleaned = 0.00682244 Jy
! Total flux subtracted in 200 components = 0.00682244 Jy
! Clean residual min=-0.007262 max=0.006742 Jy/beam
! Clean residual mean=-0.000004 rms=0.001767 Jy/beam
! Combined flux in latest and established models = 1.11092 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 88 components and 1.11092 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110567Jy  sigma=0.625832
! Fit after  self-cal, rms=0.110541Jy  sigma=0.625397
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110541Jy  sigma=0.625397
! Fit after  self-cal, rms=0.110468Jy  sigma=0.624511
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.133 mas, bmaj=3.169 mas, bpa=-7.201 degrees
! Estimated noise=2.9778 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000528511 Jy
! Component: 100  -  total flux cleaned = -0.000516036 Jy
! Component: 150  -  total flux cleaned = -0.000434408 Jy
! Component: 200  -  total flux cleaned = -0.00036808 Jy
! Total flux subtracted in 200 components = -0.00036808 Jy
! Clean residual min=-0.006342 max=0.008824 Jy/beam
! Clean residual mean=-0.000005 rms=0.002122 Jy/beam
! Combined flux in latest and established models = 1.11056 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 102 components and 1.11056 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110401Jy  sigma=0.624414
! Fit after  self-cal, rms=0.110367Jy  sigma=0.624308
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.82466e-05 Jy
! Component: 100  -  total flux cleaned = 0.000318232 Jy
! Component: 150  -  total flux cleaned = 0.000469981 Jy
! Component: 200  -  total flux cleaned = 0.000611592 Jy
! Total flux subtracted in 200 components = 0.000611592 Jy
! Clean residual min=-0.006352 max=0.008764 Jy/beam
! Clean residual mean=-0.000005 rms=0.002069 Jy/beam
! Combined flux in latest and established models = 1.11117 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 110 components and 1.11117 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110379Jy  sigma=0.624385
! Fit after  self-cal, rms=0.110365Jy  sigma=0.624338
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9351 mas, bmaj=2.207 mas, bpa=0.1746 degrees
! Estimated noise=2.61965 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9351 x 2.207 at 0.1746 degrees (North through East)
! Clean map  min=-0.0062237  max=0.91021 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110365Jy  sigma=0.624338
! Fit after  self-cal, rms=0.109190Jy  sigma=0.577638
! Inverting map and beam 
! Estimated beam: bmin=0.9359 mas, bmaj=2.208 mas, bpa=0.1512 degrees
! Estimated noise=2.61603 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00144415 Jy
! Component: 100  -  total flux cleaned = -0.00245654 Jy
! Component: 150  -  total flux cleaned = -0.00289268 Jy
! Component: 200  -  total flux cleaned = -0.00322753 Jy
! Total flux subtracted in 200 components = -0.00322753 Jy
! Clean residual min=-0.006578 max=0.006583 Jy/beam
! Clean residual mean=-0.000003 rms=0.001639 Jy/beam
! Combined flux in latest and established models = 1.10794 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 119 components and 1.10794 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108972Jy  sigma=0.577151
! Fit after  self-cal, rms=0.108964Jy  sigma=0.577126
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000263559 Jy
! Component: 100  -  total flux cleaned = -0.000507703 Jy
! Component: 150  -  total flux cleaned = -0.000742344 Jy
! Component: 200  -  total flux cleaned = -0.000909387 Jy
! Total flux subtracted in 200 components = -0.000909387 Jy
! Clean residual min=-0.006620 max=0.006529 Jy/beam
! Clean residual mean=-0.000003 rms=0.001630 Jy/beam
! Combined flux in latest and established models = 1.10703 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 125 components and 1.10703 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108862Jy  sigma=0.576742
! Fit after  self-cal, rms=0.108858Jy  sigma=0.576735
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108858Jy  sigma=0.576735
! Fit after  self-cal, rms=0.108836Jy  sigma=0.576490
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8245 mas, bmaj=2.013 mas, bpa=-0.2517 degrees
! Estimated noise=3.35704 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.709624 Jy
! Component: 100  -  total flux cleaned = 0.904012 Jy
! Component: 150  -  total flux cleaned = 0.97943 Jy
! Component: 200  -  total flux cleaned = 1.01894 Jy
! Total flux subtracted in 200 components = 1.01894 Jy
! Clean residual min=-0.012834 max=0.019758 Jy/beam
! Clean residual mean=-0.000008 rms=0.003691 Jy/beam
! Combined flux in latest and established models = 1.01894 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 1.01894 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9363 mas, bmaj=2.208 mas, bpa=0.1544 degrees
! Estimated noise=2.61218 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0282843 Jy
! Component: 100  -  total flux cleaned = 0.0441772 Jy
! Component: 150  -  total flux cleaned = 0.054844 Jy
! Component: 200  -  total flux cleaned = 0.0627902 Jy
! Total flux subtracted in 200 components = 0.0627902 Jy
! Clean residual min=-0.008134 max=0.007572 Jy/beam
! Clean residual mean=-0.000006 rms=0.002120 Jy/beam
! Combined flux in latest and established models = 1.08173 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 42 components and 1.08173 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.134 mas, bmaj=3.169 mas, bpa=-7.197 degrees
! Estimated noise=2.96501 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00877507 Jy
! Component: 100  -  total flux cleaned = 0.0119298 Jy
! Component: 150  -  total flux cleaned = 0.0145324 Jy
! Component: 200  -  total flux cleaned = 0.0167324 Jy
! Total flux subtracted in 200 components = 0.0167324 Jy
! Clean residual min=-0.006598 max=0.009216 Jy/beam
! Clean residual mean=-0.000008 rms=0.002264 Jy/beam
! Combined flux in latest and established models = 1.09846 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00165843 Jy
! Component: 100  -  total flux cleaned = 0.00283622 Jy
! Component: 150  -  total flux cleaned = 0.00345158 Jy
! Component: 200  -  total flux cleaned = 0.00393294 Jy
! Total flux subtracted in 200 components = 0.00393294 Jy
! Clean residual min=-0.006334 max=0.008792 Jy/beam
! Clean residual mean=-0.000007 rms=0.002122 Jy/beam
! Combined flux in latest and established models = 1.10239 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 78 components and 1.10239 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9363 mas, bmaj=2.208 mas, bpa=0.1544 degrees
! Estimated noise=2.61218 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00211392 Jy
! Component: 100  -  total flux cleaned = -0.00260803 Jy
! Component: 150  -  total flux cleaned = -0.00293985 Jy
! Component: 200  -  total flux cleaned = -0.00284127 Jy
! Total flux subtracted in 200 components = -0.00284127 Jy
! Clean residual min=-0.006540 max=0.006601 Jy/beam
! Clean residual mean=-0.000003 rms=0.001699 Jy/beam
! Combined flux in latest and established models = 1.09955 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 93 components and 1.09955 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109785Jy  sigma=0.579718
! Fit after  self-cal, rms=0.109724Jy  sigma=0.579306
wmodel /g0/scr/pima/npcsb_uvs/J1540+1447_X_map.mod
! Writing 93 model components to file: /g0/scr/pima/npcsb_uvs/J1540+1447_X_map.mod
wobs /g0/scr/pima/npcsb_uvs/J1540+1447_X_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1540+1447_X_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J1540+1447_X_map.win
! wwins: Wrote 3 windows to /g0/scr/pima/npcsb_uvs/J1540+1447_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000232803 Jy
! Component: 100  -  total flux cleaned = -1.21276e-05 Jy
! Component: 150  -  total flux cleaned = 0.000307464 Jy
! Component: 200  -  total flux cleaned = 0.00020711 Jy
! Component: 250  -  total flux cleaned = 0.000110816 Jy
! Component: 300  -  total flux cleaned = 0.00020464 Jy
! Component: 350  -  total flux cleaned = 0.000292652 Jy
! Component: 400  -  total flux cleaned = 0.000468026 Jy
! Component: 450  -  total flux cleaned = 0.000209969 Jy
! Component: 500  -  total flux cleaned = 0.000130366 Jy
! Component: 550  -  total flux cleaned = 5.06947e-05 Jy
! Component: 600  -  total flux cleaned = 5.19872e-05 Jy
! Component: 650  -  total flux cleaned = 0.000205374 Jy
! Component: 700  -  total flux cleaned = 0.00042891 Jy
! Component: 750  -  total flux cleaned = 0.000576614 Jy
! Component: 800  -  total flux cleaned = 0.000577305 Jy
! Component: 850  -  total flux cleaned = 0.000440667 Jy
! Component: 900  -  total flux cleaned = 0.000576922 Jy
! Component: 950  -  total flux cleaned = 0.000509828 Jy
! Component: 1000  -  total flux cleaned = 0.000442802 Jy
! Component: 1050  -  total flux cleaned = 0.000378474 Jy
! Component: 1100  -  total flux cleaned = 0.000126 Jy
! Component: 1150  -  total flux cleaned = 0.000128168 Jy
! Component: 1200  -  total flux cleaned = 6.72657e-05 Jy
! Component: 1250  -  total flux cleaned = -5.2725e-05 Jy
! Component: 1300  -  total flux cleaned = -0.000288662 Jy
! Component: 1350  -  total flux cleaned = -0.000521461 Jy
! Component: 1400  -  total flux cleaned = -0.000863817 Jy
! Component: 1450  -  total flux cleaned = -0.00108916 Jy
! Component: 1500  -  total flux cleaned = -0.00114395 Jy
! Component: 1550  -  total flux cleaned = -0.00136303 Jy
! Component: 1600  -  total flux cleaned = -0.00152508 Jy
! Component: 1650  -  total flux cleaned = -0.00179028 Jy
! Component: 1700  -  total flux cleaned = -0.00194832 Jy
! Component: 1750  -  total flux cleaned = -0.00215531 Jy
! Component: 1800  -  total flux cleaned = -0.00235935 Jy
! Component: 1850  -  total flux cleaned = -0.00256071 Jy
! Component: 1900  -  total flux cleaned = -0.00266094 Jy
! Component: 1950  -  total flux cleaned = -0.00285763 Jy
! Component: 2000  -  total flux cleaned = -0.00290646 Jy
! Component: 2050  -  total flux cleaned = -0.00309838 Jy
! Component: 2100  -  total flux cleaned = -0.00333496 Jy
! Component: 2150  -  total flux cleaned = -0.00342802 Jy
! Component: 2200  -  total flux cleaned = -0.00352175 Jy
! Component: 2250  -  total flux cleaned = -0.00356815 Jy
! Component: 2300  -  total flux cleaned = -0.00379484 Jy
! Component: 2350  -  total flux cleaned = -0.00383931 Jy
! Component: 2400  -  total flux cleaned = -0.00388415 Jy
! Component: 2450  -  total flux cleaned = -0.00405954 Jy
! Component: 2500  -  total flux cleaned = -0.00405955 Jy
! Component: 2550  -  total flux cleaned = -0.00418872 Jy
! Component: 2600  -  total flux cleaned = -0.00414632 Jy
! Component: 2650  -  total flux cleaned = -0.00427398 Jy
! Component: 2700  -  total flux cleaned = -0.00435888 Jy
! Component: 2750  -  total flux cleaned = -0.00448373 Jy
! Component: 2800  -  total flux cleaned = -0.00468973 Jy
! Component: 2850  -  total flux cleaned = -0.00477137 Jy
! Component: 2900  -  total flux cleaned = -0.00493332 Jy
! Component: 2950  -  total flux cleaned = -0.00505362 Jy
! Component: 3000  -  total flux cleaned = -0.00521281 Jy
! Component: 3050  -  total flux cleaned = -0.00525241 Jy
! Component: 3100  -  total flux cleaned = -0.00552599 Jy
! Component: 3150  -  total flux cleaned = -0.00548731 Jy
! Component: 3200  -  total flux cleaned = -0.00571827 Jy
! Component: 3250  -  total flux cleaned = -0.00575647 Jy
! Component: 3300  -  total flux cleaned = -0.00590799 Jy
! Component: 3350  -  total flux cleaned = -0.00602062 Jy
! Component: 3400  -  total flux cleaned = -0.00602054 Jy
! Component: 3450  -  total flux cleaned = -0.00616884 Jy
! Component: 3500  -  total flux cleaned = -0.00616897 Jy
! Component: 3550  -  total flux cleaned = -0.00631481 Jy
! Component: 3600  -  total flux cleaned = -0.00627873 Jy
! Component: 3650  -  total flux cleaned = -0.00635089 Jy
! Component: 3700  -  total flux cleaned = -0.00638632 Jy
! Component: 3750  -  total flux cleaned = -0.00635096 Jy
! Component: 3800  -  total flux cleaned = -0.00642177 Jy
! Component: 3850  -  total flux cleaned = -0.00635164 Jy
! Component: 3900  -  total flux cleaned = -0.00635173 Jy
! Component: 3950  -  total flux cleaned = -0.00642095 Jy
! Component: 4000  -  total flux cleaned = -0.00648963 Jy
! Component: 4050  -  total flux cleaned = -0.00648923 Jy
! Total flux subtracted in 4096 components = -0.00648912 Jy
! Clean residual min=-0.001826 max=0.002031 Jy/beam
! Clean residual mean=-0.000001 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 1.09306 Jy
keep
! Adding 281 model components to the UV plane model.
! The established model now contains 374 components and 1.09306 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J1540+1447_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9363 x 2.208 at 0.1544 degrees (North through East)
! Clean map  min=-0.0042692  max=0.91045 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1540+1447_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.910451 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000548666 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.180789 0.180789 0.361578 0.723157 1.44631 2.89263 5.78525 11.5705 23.141 46.282 92.564
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0016 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.91 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J1540+1447_X_uvs.log closed on Sat Oct  5 18:53:48 2013