! Started logfile: /g0/scr/pima/npcsb_uvs/J1537+8154_X_uvs.log on Sat Oct 5 18:53:39 2013 obs /g0/scr/pima/npcsb_uvs/J1537+8154_X_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1537+8154_X_uva.fits ! AN table 1: 46 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.6 visibilities/baseline/integration-bin. ! Found source: J1537+8154 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 4968 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1537+8154_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.007762Jy sigma=0.985051 ! Fit after self-cal, rms=0.927429Jy sigma=0.853816 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7399 mas, bmaj=2.681 mas, bpa=3.002 degrees ! Estimated noise=24.8016 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0697092 Jy ! Component: 100 - total flux cleaned = 0.0919374 Jy ! Total flux subtracted in 100 components = 0.0919374 Jy ! Clean residual min=-0.009804 max=0.012782 Jy/beam ! Clean residual mean=-0.000018 rms=0.002663 Jy/beam ! Combined flux in latest and established models = 0.0919374 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0919374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085937Jy sigma=0.092603 ! Fit after self-cal, rms=0.084540Jy sigma=0.091529 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.063 mas, bmaj=3.059 mas, bpa=3.894 degrees ! Estimated noise=11.8398 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203066 Jy ! Component: 100 - total flux cleaned = 0.0279646 Jy ! Component: 150 - total flux cleaned = 0.0315409 Jy ! Component: 200 - total flux cleaned = 0.0321191 Jy ! Total flux subtracted in 200 components = 0.0321191 Jy ! Clean residual min=-0.007803 max=0.010188 Jy/beam ! Clean residual mean=-0.000034 rms=0.002709 Jy/beam ! Combined flux in latest and established models = 0.124057 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 28 components and 0.124057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085953Jy sigma=0.082431 ! Fit after self-cal, rms=0.085684Jy sigma=0.082171 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.92 HN 1.02 KP 1.02 ! LA 0.87 MK 1.04 NL 1.00* OV 1.00 ! PT 0.93 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.89 HN 0.96 KP 0.97 ! LA 0.83 MK 1.04 NL 1.00* OV 0.90 ! PT 1.02 SC 0.80 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.85 HN 1.16 KP 0.87 ! LA 0.86 MK 0.80 NL 1.00* OV 0.97 ! PT 1.04 SC 0.63 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 FD 0.90 HN 1.01 KP 0.89 ! LA 0.84 MK 0.81 NL 1.00* OV 0.94 ! PT 1.04 SC 0.74 ! ! ! Fit before self-cal, rms=0.085684Jy sigma=0.082171 ! Fit after self-cal, rms=0.077040Jy sigma=0.078187 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.037 mas, bmaj=3.107 mas, bpa=4.317 degrees ! Estimated noise=9.84158 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0126568 Jy ! Component: 100 - total flux cleaned = -0.0153791 Jy ! Component: 150 - total flux cleaned = -0.0152322 Jy ! Component: 200 - total flux cleaned = -0.0151261 Jy ! Total flux subtracted in 200 components = -0.0151261 Jy ! Clean residual min=-0.005237 max=0.007842 Jy/beam ! Clean residual mean=-0.000023 rms=0.001935 Jy/beam ! Combined flux in latest and established models = 0.10893 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 42 components and 0.10893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071227Jy sigma=0.080294 ! Fit after self-cal, rms=0.071359Jy sigma=0.080207 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071359Jy sigma=0.080207 ! Fit after self-cal, rms=0.065263Jy sigma=0.077994 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.013 mas, bmaj=3.12 mas, bpa=4.503 degrees ! Estimated noise=8.33799 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0106025 Jy ! Component: 100 - total flux cleaned = -0.0135187 Jy ! Component: 150 - total flux cleaned = -0.0137207 Jy ! Component: 200 - total flux cleaned = -0.0136528 Jy ! Total flux subtracted in 200 components = -0.0136528 Jy ! Clean residual min=-0.004361 max=0.006711 Jy/beam ! Clean residual mean=-0.000019 rms=0.001632 Jy/beam ! Combined flux in latest and established models = 0.0952776 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 51 components and 0.0952776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060450Jy sigma=0.080160 ! Fit after self-cal, rms=0.060470Jy sigma=0.080138 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.71758e-05 Jy ! Component: 100 - total flux cleaned = -2.77009e-05 Jy ! Component: 150 - total flux cleaned = 2.33203e-05 Jy ! Component: 200 - total flux cleaned = 2.33552e-05 Jy ! Total flux subtracted in 200 components = 2.33552e-05 Jy ! Clean residual min=-0.004309 max=0.006658 Jy/beam ! Clean residual mean=-0.000019 rms=0.001629 Jy/beam ! Combined flux in latest and established models = 0.095301 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 62 components and 0.095301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060329Jy sigma=0.080259 ! Fit after self-cal, rms=0.060323Jy sigma=0.080248 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060323Jy sigma=0.080248 ! Fit after self-cal, rms=0.055066Jy sigma=0.077912 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9925 mas, bmaj=3.129 mas, bpa=4.647 degrees ! Estimated noise=7.02418 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00882085 Jy ! Component: 100 - total flux cleaned = -0.0113383 Jy ! Component: 150 - total flux cleaned = -0.0120417 Jy ! Component: 200 - total flux cleaned = -0.0122119 Jy ! Total flux subtracted in 200 components = -0.0122119 Jy ! Clean residual min=-0.003540 max=0.005563 Jy/beam ! Clean residual mean=-0.000015 rms=0.001359 Jy/beam ! Combined flux in latest and established models = 0.0830891 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 70 components and 0.0830891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051068Jy sigma=0.080081 ! Fit after self-cal, rms=0.051069Jy sigma=0.080057 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000167809 Jy ! Component: 100 - total flux cleaned = -0.0001436 Jy ! Component: 150 - total flux cleaned = -0.000123753 Jy ! Component: 200 - total flux cleaned = -8.90385e-05 Jy ! Total flux subtracted in 200 components = -8.90385e-05 Jy ! Clean residual min=-0.003549 max=0.005555 Jy/beam ! Clean residual mean=-0.000016 rms=0.001358 Jy/beam ! Combined flux in latest and established models = 0.0830001 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 71 components and 0.0830001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050980Jy sigma=0.080162 ! Fit after self-cal, rms=0.050982Jy sigma=0.080154 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050982Jy sigma=0.080154 ! Fit after self-cal, rms=0.046762Jy sigma=0.077857 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.538 mas, bmaj=4.536 mas, bpa=31.52 degrees ! Estimated noise=6.8867 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00809693 Jy ! Component: 100 - total flux cleaned = -0.00988469 Jy ! Component: 150 - total flux cleaned = -0.00998564 Jy ! Component: 200 - total flux cleaned = -0.0100384 Jy ! Total flux subtracted in 200 components = -0.0100384 Jy ! Clean residual min=-0.004249 max=0.006772 Jy/beam ! Clean residual mean=-0.000021 rms=0.001809 Jy/beam ! Combined flux in latest and established models = 0.0729617 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 79 components and 0.0729617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.043328Jy sigma=0.080279 ! Fit after self-cal, rms=0.043294Jy sigma=0.080174 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.14761e-05 Jy ! Component: 100 - total flux cleaned = 4.32875e-05 Jy ! Component: 150 - total flux cleaned = 6.2383e-05 Jy ! Component: 200 - total flux cleaned = 6.28878e-05 Jy ! Total flux subtracted in 200 components = 6.28878e-05 Jy ! Clean residual min=-0.004194 max=0.006692 Jy/beam ! Clean residual mean=-0.000021 rms=0.001803 Jy/beam ! Combined flux in latest and established models = 0.0730245 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 81 components and 0.0730245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.043271Jy sigma=0.080266 ! Fit after self-cal, rms=0.043252Jy sigma=0.080259 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.9767 mas, bmaj=3.136 mas, bpa=4.7 degrees ! Estimated noise=5.93684 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9767 x 3.136 at 4.7 degrees (North through East) ! Clean map min=-0.0029286 max=0.051936 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6937 mas, bmaj=2.892 mas, bpa=4.031 degrees ! Estimated noise=11.4046 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0316939 Jy ! Component: 100 - total flux cleaned = 0.0450897 Jy ! Component: 150 - total flux cleaned = 0.0528586 Jy ! Component: 200 - total flux cleaned = 0.0575195 Jy ! Total flux subtracted in 200 components = 0.0575195 Jy ! Clean residual min=-0.004483 max=0.004619 Jy/beam ! Clean residual mean=-0.000006 rms=0.001150 Jy/beam ! Combined flux in latest and established models = 0.0575195 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0575195 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9767 mas, bmaj=3.136 mas, bpa=4.7 degrees ! Estimated noise=5.93684 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00693724 Jy ! Component: 100 - total flux cleaned = 0.0101426 Jy ! Component: 150 - total flux cleaned = 0.0119106 Jy ! Component: 200 - total flux cleaned = 0.0125228 Jy ! Total flux subtracted in 200 components = 0.0125228 Jy ! Clean residual min=-0.003300 max=0.005006 Jy/beam ! Clean residual mean=-0.000014 rms=0.001194 Jy/beam ! Combined flux in latest and established models = 0.0700423 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 31 components and 0.0700423 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.538 mas, bmaj=4.536 mas, bpa=31.52 degrees ! Estimated noise=6.8867 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168528 Jy ! Component: 100 - total flux cleaned = 0.0018501 Jy ! Component: 150 - total flux cleaned = 0.00198596 Jy ! Component: 200 - total flux cleaned = 0.0020736 Jy ! Total flux subtracted in 200 components = 0.0020736 Jy ! Clean residual min=-0.004351 max=0.006869 Jy/beam ! Clean residual mean=-0.000022 rms=0.001831 Jy/beam ! Combined flux in latest and established models = 0.0721159 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.63008e-05 Jy ! Component: 100 - total flux cleaned = 0.000119861 Jy ! Component: 150 - total flux cleaned = 0.000140854 Jy ! Component: 200 - total flux cleaned = 0.000161202 Jy ! Total flux subtracted in 200 components = 0.000161202 Jy ! Clean residual min=-0.004309 max=0.006765 Jy/beam ! Clean residual mean=-0.000021 rms=0.001819 Jy/beam ! Combined flux in latest and established models = 0.0722771 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 38 components and 0.0722771 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9767 mas, bmaj=3.136 mas, bpa=4.7 degrees ! Estimated noise=5.93684 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000766564 Jy ! Component: 100 - total flux cleaned = -0.000842358 Jy ! Component: 150 - total flux cleaned = -0.000845924 Jy ! Component: 200 - total flux cleaned = -0.000846401 Jy ! Total flux subtracted in 200 components = -0.000846401 Jy ! Clean residual min=-0.003183 max=0.004755 Jy/beam ! Clean residual mean=-0.000013 rms=0.001148 Jy/beam ! Combined flux in latest and established models = 0.0714307 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 45 components and 0.0714306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.043304Jy sigma=0.080383 ! Fit after self-cal, rms=0.043290Jy sigma=0.080317 wmodel /g0/scr/pima/npcsb_uvs/J1537+8154_X_map.mod ! Writing 45 model components to file: /g0/scr/pima/npcsb_uvs/J1537+8154_X_map.mod wobs /g0/scr/pima/npcsb_uvs/J1537+8154_X_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1537+8154_X_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J1537+8154_X_map.win ! wwins: Wrote 1 windows to /g0/scr/pima/npcsb_uvs/J1537+8154_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00205477 Jy ! Component: 100 - total flux cleaned = 0.00374489 Jy ! Component: 150 - total flux cleaned = 0.00484642 Jy ! Component: 200 - total flux cleaned = 0.00484488 Jy ! Component: 250 - total flux cleaned = 0.00489207 Jy ! Component: 300 - total flux cleaned = 0.00493523 Jy ! Component: 350 - total flux cleaned = 0.00497398 Jy ! Component: 400 - total flux cleaned = 0.00512716 Jy ! Component: 450 - total flux cleaned = 0.00534446 Jy ! Component: 500 - total flux cleaned = 0.00534457 Jy ! Component: 550 - total flux cleaned = 0.00534523 Jy ! Component: 600 - total flux cleaned = 0.00531444 Jy ! Component: 650 - total flux cleaned = 0.0053447 Jy ! Component: 700 - total flux cleaned = 0.00537317 Jy ! Component: 750 - total flux cleaned = 0.00534557 Jy ! Component: 800 - total flux cleaned = 0.00537319 Jy ! Component: 850 - total flux cleaned = 0.00529738 Jy ! Component: 900 - total flux cleaned = 0.00519998 Jy ! Component: 950 - total flux cleaned = 0.0051057 Jy ! Component: 1000 - total flux cleaned = 0.00501412 Jy ! Component: 1050 - total flux cleaned = 0.00483625 Jy ! Component: 1100 - total flux cleaned = 0.00474909 Jy ! Component: 1150 - total flux cleaned = 0.00460175 Jy ! Component: 1200 - total flux cleaned = 0.00451984 Jy ! Component: 1250 - total flux cleaned = 0.0044202 Jy ! Component: 1300 - total flux cleaned = 0.00438152 Jy ! Component: 1350 - total flux cleaned = 0.00436272 Jy ! Component: 1400 - total flux cleaned = 0.00428783 Jy ! Component: 1450 - total flux cleaned = 0.00421401 Jy ! Component: 1500 - total flux cleaned = 0.00412322 Jy ! Component: 1550 - total flux cleaned = 0.00407003 Jy ! Component: 1600 - total flux cleaned = 0.00403518 Jy ! Component: 1650 - total flux cleaned = 0.00391498 Jy ! Component: 1700 - total flux cleaned = 0.00389822 Jy ! Component: 1750 - total flux cleaned = 0.00388156 Jy ! Component: 1800 - total flux cleaned = 0.00389754 Jy ! Component: 1850 - total flux cleaned = 0.00383284 Jy ! Component: 1900 - total flux cleaned = 0.00383279 Jy ! Component: 1950 - total flux cleaned = 0.00378547 Jy ! Component: 2000 - total flux cleaned = 0.0037855 Jy ! Component: 2050 - total flux cleaned = 0.0037551 Jy ! Component: 2100 - total flux cleaned = 0.00377015 Jy ! Component: 2150 - total flux cleaned = 0.00375523 Jy ! Component: 2200 - total flux cleaned = 0.00374054 Jy ! Component: 2250 - total flux cleaned = 0.00369675 Jy ! Component: 2300 - total flux cleaned = 0.0036391 Jy ! Component: 2350 - total flux cleaned = 0.00365357 Jy ! Component: 2400 - total flux cleaned = 0.00359688 Jy ! Component: 2450 - total flux cleaned = 0.00359677 Jy ! Component: 2500 - total flux cleaned = 0.00355475 Jy ! Component: 2550 - total flux cleaned = 0.0034858 Jy ! Component: 2600 - total flux cleaned = 0.00349952 Jy ! Component: 2650 - total flux cleaned = 0.00340452 Jy ! Component: 2700 - total flux cleaned = 0.00339118 Jy ! Component: 2750 - total flux cleaned = 0.00333771 Jy ! Component: 2800 - total flux cleaned = 0.00332444 Jy ! Component: 2850 - total flux cleaned = 0.00325872 Jy ! Component: 2900 - total flux cleaned = 0.00327185 Jy ! Component: 2950 - total flux cleaned = 0.00323283 Jy ! Component: 3000 - total flux cleaned = 0.0032071 Jy ! Component: 3050 - total flux cleaned = 0.00324532 Jy ! Component: 3100 - total flux cleaned = 0.00327069 Jy ! Component: 3150 - total flux cleaned = 0.00329584 Jy ! Component: 3200 - total flux cleaned = 0.00325825 Jy ! Component: 3250 - total flux cleaned = 0.00328322 Jy ! Component: 3300 - total flux cleaned = 0.00333277 Jy ! Component: 3350 - total flux cleaned = 0.00336971 Jy ! Component: 3400 - total flux cleaned = 0.00339391 Jy ! Component: 3450 - total flux cleaned = 0.00338174 Jy ! Component: 3500 - total flux cleaned = 0.00335777 Jy ! Component: 3550 - total flux cleaned = 0.00344161 Jy ! Component: 3600 - total flux cleaned = 0.0034655 Jy ! Component: 3650 - total flux cleaned = 0.00347726 Jy ! Component: 3700 - total flux cleaned = 0.00353606 Jy ! Component: 3750 - total flux cleaned = 0.00353597 Jy ! Component: 3800 - total flux cleaned = 0.00351264 Jy ! Component: 3850 - total flux cleaned = 0.00352427 Jy ! Component: 3900 - total flux cleaned = 0.0035127 Jy ! Component: 3950 - total flux cleaned = 0.00354725 Jy ! Component: 4000 - total flux cleaned = 0.00350151 Jy ! Component: 4050 - total flux cleaned = 0.00353571 Jy ! Total flux subtracted in 4096 components = 0.00354705 Jy ! Clean residual min=-0.000748 max=0.000646 Jy/beam ! Clean residual mean=-0.000002 rms=0.000191 Jy/beam ! Combined flux in latest and established models = 0.0749777 Jy keep ! Adding 303 model components to the UV plane model. ! The established model now contains 348 components and 0.0749777 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J1537+8154_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9767 x 3.136 at 4.7 degrees (North through East) ! Clean map min=-0.0014806 max=0.051013 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1537+8154_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0510129 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000182789 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.07496 1.07496 2.14991 4.29982 8.59964 17.1993 34.3986 68.7971 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.051 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J1537+8154_X_uvs.log closed on Sat Oct 5 18:53:43 2013