! Started logfile: /g0/scr/pima/npcsb_uvs/J1523+7645_S_uvs.log on Sat Oct  5 18:59:36 2013
obs /g0/scr/pima/npcsb_uvs/J1523+7645_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1523+7645_S_uva.fits
! AN table 1: 47 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.9 visibilities/baseline/integration-bin.
! Found source: J1523+7645
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1692 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1523+7645_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.010722Jy  sigma=0.823182
! Fit after  self-cal, rms=0.939207Jy  sigma=0.716048
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=15.28 mas, bmaj=39.87 mas, bpa=28.12 degrees
! Estimated noise=25.6494 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0701246 Jy
! Component: 100  -  total flux cleaned = 0.0782917 Jy
! Total flux subtracted in 100 components = 0.0782917 Jy
! Clean residual min=-0.009676 max=0.009565 Jy/beam
! Clean residual mean=-0.000006 rms=0.004626 Jy/beam
! Combined flux in latest and established models = 0.0782917 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.0782917 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081622Jy  sigma=0.072477
! Fit after  self-cal, rms=0.080614Jy  sigma=0.071845
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=15.18 mas, bmaj=39.29 mas, bpa=23.58 degrees
! Estimated noise=24.1676 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000386886 Jy
! Component: 100  -  total flux cleaned = -0.000442525 Jy
! Component: 150  -  total flux cleaned = -0.00174622 Jy
! Component: 200  -  total flux cleaned = -0.0028195 Jy
! Total flux subtracted in 200 components = -0.0028195 Jy
! Clean residual min=-0.003967 max=0.003957 Jy/beam
! Clean residual mean=-0.000014 rms=0.001913 Jy/beam
! Combined flux in latest and established models = 0.0754722 Jy
! Performing phase self-cal
! Adding 113 model components to the UV plane model.
! The established model now contains 131 components and 0.0754722 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080778Jy  sigma=0.066291
! Fit after  self-cal, rms=0.079963Jy  sigma=0.066024
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.92     KP        0.91     LA        1.03     OV        1.01     
!   PT        0.88     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     KP        0.76     LA        1.11     OV        0.98     
!   PT        0.76     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.89     KP        0.89     LA        0.81     OV        0.95     
!   PT        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     KP        1.00     LA        0.67     OV        0.90     
!   PT        0.85     
! 
! 
! Fit before self-cal, rms=0.079963Jy  sigma=0.066024
! Fit after  self-cal, rms=0.070992Jy  sigma=0.060154
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=15.33 mas, bmaj=39.16 mas, bpa=23.17 degrees
! Estimated noise=19.3524 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0128601 Jy
! Component: 100  -  total flux cleaned = -0.014766 Jy
! Component: 150  -  total flux cleaned = -0.0145228 Jy
! Component: 200  -  total flux cleaned = -0.0143818 Jy
! Total flux subtracted in 200 components = -0.0143818 Jy
! Clean residual min=-0.001121 max=0.001104 Jy/beam
! Clean residual mean=0.000005 rms=0.000415 Jy/beam
! Combined flux in latest and established models = 0.0610904 Jy
! Performing phase self-cal
! Adding 56 model components to the UV plane model.
! The established model now contains 186 components and 0.0610904 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064332Jy  sigma=0.062141
! Fit after  self-cal, rms=0.064257Jy  sigma=0.061847
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064257Jy  sigma=0.061847
! Fit after  self-cal, rms=0.058655Jy  sigma=0.059644
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=15.27 mas, bmaj=39.08 mas, bpa=23.26 degrees
! Estimated noise=16.0275 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0103409 Jy
! Component: 100  -  total flux cleaned = -0.0130338 Jy
! Component: 150  -  total flux cleaned = -0.0140051 Jy
! Component: 200  -  total flux cleaned = -0.0142729 Jy
! Total flux subtracted in 200 components = -0.0142729 Jy
! Clean residual min=-0.000802 max=0.000796 Jy/beam
! Clean residual mean=0.000005 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.0468175 Jy
selfcal
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 230 components and 0.0468175 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053367Jy  sigma=0.061653
! Fit after  self-cal, rms=0.053371Jy  sigma=0.061608
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.57225e-05 Jy
! Component: 100  -  total flux cleaned = -9.35299e-05 Jy
! Component: 150  -  total flux cleaned = -0.000307176 Jy
! Component: 200  -  total flux cleaned = -0.000348131 Jy
! Total flux subtracted in 200 components = -0.000348131 Jy
! Clean residual min=-0.000698 max=0.000696 Jy/beam
! Clean residual mean=0.000002 rms=0.000238 Jy/beam
! Combined flux in latest and established models = 0.0464694 Jy
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 284 components and 0.0464694 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053271Jy  sigma=0.061562
! Fit after  self-cal, rms=0.053253Jy  sigma=0.061530
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053253Jy  sigma=0.061530
! Fit after  self-cal, rms=0.048200Jy  sigma=0.059328
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=15.17 mas, bmaj=39.02 mas, bpa=23.47 degrees
! Estimated noise=13.3378 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00795002 Jy
! Component: 100  -  total flux cleaned = -0.00894495 Jy
! Component: 150  -  total flux cleaned = -0.00915814 Jy
! Component: 200  -  total flux cleaned = -0.00919357 Jy
! Total flux subtracted in 200 components = -0.00919357 Jy
! Clean residual min=-0.000569 max=0.000563 Jy/beam
! Clean residual mean=0.000004 rms=0.000218 Jy/beam
! Combined flux in latest and established models = 0.0372758 Jy
selfcal
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 339 components and 0.0372759 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.044186Jy  sigma=0.061354
! Fit after  self-cal, rms=0.044176Jy  sigma=0.061326
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000196718 Jy
! Component: 100  -  total flux cleaned = -4.82247e-05 Jy
! Component: 150  -  total flux cleaned = -0.000103173 Jy
! Component: 200  -  total flux cleaned = -0.000103873 Jy
! Total flux subtracted in 200 components = -0.000103873 Jy
! Clean residual min=-0.000422 max=0.000420 Jy/beam
! Clean residual mean=0.000001 rms=0.000159 Jy/beam
! Combined flux in latest and established models = 0.037172 Jy
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 399 components and 0.037172 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.044069Jy  sigma=0.061383
! Fit after  self-cal, rms=0.044062Jy  sigma=0.061375
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.044062Jy  sigma=0.061375
! Fit after  self-cal, rms=0.039900Jy  sigma=0.059103
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=15.57 mas, bmaj=38.61 mas, bpa=23.75 degrees
! Estimated noise=11.0363 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00653666 Jy
! Component: 100  -  total flux cleaned = -0.00684414 Jy
! Component: 150  -  total flux cleaned = -0.00678995 Jy
! Component: 200  -  total flux cleaned = -0.00699002 Jy
! Total flux subtracted in 200 components = -0.00699002 Jy
! Clean residual min=-0.000489 max=0.000484 Jy/beam
! Clean residual mean=0.000003 rms=0.000197 Jy/beam
! Combined flux in latest and established models = 0.030182 Jy
selfcal
! Performing phase self-cal
! Adding 69 model components to the UV plane model.
! The established model now contains 455 components and 0.0301819 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.036628Jy  sigma=0.061056
! Fit after  self-cal, rms=0.036617Jy  sigma=0.061025
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.04711e-05 Jy
! Component: 100  -  total flux cleaned = 0.00017228 Jy
! Component: 150  -  total flux cleaned = 0.000175107 Jy
! Component: 200  -  total flux cleaned = 0.00014322 Jy
! Total flux subtracted in 200 components = 0.00014322 Jy
! Clean residual min=-0.000271 max=0.000270 Jy/beam
! Clean residual mean=0.000001 rms=0.000107 Jy/beam
! Combined flux in latest and established models = 0.0303252 Jy
! Performing phase self-cal
! Adding 74 model components to the UV plane model.
! The established model now contains 514 components and 0.0303252 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.036466Jy  sigma=0.061217
! Fit after  self-cal, rms=0.036463Jy  sigma=0.061212
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=15.09 mas, bmaj=38.95 mas, bpa=23.67 degrees
! Estimated noise=11.0594 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 15.09 x 38.95 at 23.67 degrees (North through East)
! Clean map  min=-0.0060173  max=0.036984 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=15.18 mas, bmaj=39.53 mas, bpa=28.38 degrees
! Estimated noise=11.6692 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.031424 Jy
! Component: 100  -  total flux cleaned = 0.0339533 Jy
! Component: 150  -  total flux cleaned = 0.0324398 Jy
! Component: 200  -  total flux cleaned = 0.0309984 Jy
! Total flux subtracted in 200 components = 0.0309984 Jy
! Clean residual min=-0.003456 max=0.003481 Jy/beam
! Clean residual mean=-0.000012 rms=0.001684 Jy/beam
! Combined flux in latest and established models = 0.0309984 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 70 model components to the UV plane model.
! The established model now contains 70 components and 0.0309984 Jy
! Inverting map and beam 
! Estimated beam: bmin=15.09 mas, bmaj=38.95 mas, bpa=23.67 degrees
! Estimated noise=11.0594 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00199754 Jy
! Component: 100  -  total flux cleaned = -0.00404612 Jy
! Component: 150  -  total flux cleaned = -0.00592791 Jy
! Component: 200  -  total flux cleaned = -0.007192 Jy
! Total flux subtracted in 200 components = -0.007192 Jy
! Clean residual min=-0.001377 max=0.001375 Jy/beam
! Clean residual mean=-0.000005 rms=0.000737 Jy/beam
! Combined flux in latest and established models = 0.0238064 Jy
! Adding 104 model components to the UV plane model.
! The established model now contains 173 components and 0.0238064 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=15.57 mas, bmaj=38.61 mas, bpa=23.75 degrees
! Estimated noise=11.0363 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000135101 Jy
! Component: 100  -  total flux cleaned = -0.000629121 Jy
! Component: 150  -  total flux cleaned = -0.00125041 Jy
! Component: 200  -  total flux cleaned = -0.00183316 Jy
! Total flux subtracted in 200 components = -0.00183316 Jy
! Clean residual min=-0.000708 max=0.000704 Jy/beam
! Clean residual mean=-0.000002 rms=0.000353 Jy/beam
! Combined flux in latest and established models = 0.0219732 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000243148 Jy
! Component: 100  -  total flux cleaned = -0.000352988 Jy
! Component: 150  -  total flux cleaned = -0.000424137 Jy
! Component: 200  -  total flux cleaned = -0.000561906 Jy
! Total flux subtracted in 200 components = -0.000561906 Jy
! Clean residual min=-0.000567 max=0.000563 Jy/beam
! Clean residual mean=-0.000003 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.0214113 Jy
! Adding 179 model components to the UV plane model.
! The established model now contains 340 components and 0.0214113 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=15.09 mas, bmaj=38.95 mas, bpa=23.67 degrees
! Estimated noise=11.0594 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000445225 Jy
! Component: 100  -  total flux cleaned = 0.00061498 Jy
! Component: 150  -  total flux cleaned = 0.000863534 Jy
! Component: 200  -  total flux cleaned = 0.00116064 Jy
! Total flux subtracted in 200 components = 0.00116064 Jy
! Clean residual min=-0.000365 max=0.000368 Jy/beam
! Clean residual mean=0.000000 rms=0.000165 Jy/beam
! Combined flux in latest and established models = 0.022572 Jy
selfcal
! Performing phase self-cal
! Adding 63 model components to the UV plane model.
! The established model now contains 401 components and 0.0225719 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.036437Jy  sigma=0.061507
! Fit after  self-cal, rms=0.036388Jy  sigma=0.061469
wmodel /g0/scr/pima/npcsb_uvs/J1523+7645_S_map.mod
! Writing 401 model components to file: /g0/scr/pima/npcsb_uvs/J1523+7645_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J1523+7645_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1523+7645_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J1523+7645_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/g0/scr/pima/npcsb_uvs/J1523+7645_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 15.09 x 38.95 at 23.67 degrees (North through East)
! Clean map  min=-0.0055276  max=0.033017 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1523+7645_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.033017 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000164286 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.49274 1.49274 2.98548 5.97096 11.9419 23.8838 47.7677 95.5354
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0004 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.033 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J1523+7645_S_uvs.log closed on Sat Oct  5 18:59:40 2013