! Started logfile: /g0/scr/pima/npcsb_uvs/J1522+7645_X_uvs.log on Sat Oct  5 18:53:35 2013
obs /g0/scr/pima/npcsb_uvs/J1522+7645_X_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1522+7645_X_uva.fits
! AN table 1: 47 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.666667 visibilities/baseline/integration-bin.
! Found source: J1522+7645
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 4512 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1522+7645_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.004081Jy  sigma=0.730850
! Fit after  self-cal, rms=0.959738Jy  sigma=0.664103
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.096 mas, bmaj=3.226 mas, bpa=-4.963 degrees
! Estimated noise=27.6467 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0525922 Jy
! Component: 100  -  total flux cleaned = 0.0617423 Jy
! Total flux subtracted in 100 components = 0.0617423 Jy
! Clean residual min=-0.008690 max=0.008719 Jy/beam
! Clean residual mean=-0.000011 rms=0.002169 Jy/beam
! Combined flux in latest and established models = 0.0617423 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.0617423 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075408Jy  sigma=0.058028
! Fit after  self-cal, rms=0.073130Jy  sigma=0.056511
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.493 mas, bmaj=3.306 mas, bpa=-5.579 degrees
! Estimated noise=16.518 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00423634 Jy
! Component: 100  -  total flux cleaned = 0.00464115 Jy
! Component: 150  -  total flux cleaned = 0.00483671 Jy
! Component: 200  -  total flux cleaned = 0.00500836 Jy
! Total flux subtracted in 200 components = 0.00500836 Jy
! Clean residual min=-0.005947 max=0.005937 Jy/beam
! Clean residual mean=-0.000003 rms=0.001595 Jy/beam
! Combined flux in latest and established models = 0.0667506 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 13 components and 0.0667506 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074485Jy  sigma=0.055240
! Fit after  self-cal, rms=0.074415Jy  sigma=0.055222
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.86     KP        0.87     
!   LA        0.81     NL        0.92     OV        0.99     PT        0.82     
!   SC        0.76     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.82     KP        0.85     
!   LA        0.81     NL        0.92     OV        1.02     PT        0.89     
!   SC        0.84     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.82     FD        0.99     HN        0.80     KP        0.70     
!   LA        0.88     NL        0.91     OV        0.90     PT        0.95     
!   SC        0.69     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.66     FD        0.85     HN        0.73     KP        0.70     
!   LA        0.88     NL        0.91     OV        0.90     PT        1.21     
!   SC        0.75     
! 
! 
! Fit before self-cal, rms=0.074415Jy  sigma=0.055222
! Fit after  self-cal, rms=0.064085Jy  sigma=0.051799
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.457 mas, bmaj=3.255 mas, bpa=-4.951 degrees
! Estimated noise=12.5977 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0121301 Jy
! Component: 100  -  total flux cleaned = -0.0143247 Jy
! Component: 150  -  total flux cleaned = -0.0142277 Jy
! Component: 200  -  total flux cleaned = -0.0140115 Jy
! Total flux subtracted in 200 components = -0.0140115 Jy
! Clean residual min=-0.002700 max=0.003650 Jy/beam
! Clean residual mean=-0.000004 rms=0.000837 Jy/beam
! Combined flux in latest and established models = 0.0527391 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 19 components and 0.0527391 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057744Jy  sigma=0.053826
! Fit after  self-cal, rms=0.057932Jy  sigma=0.053725
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057932Jy  sigma=0.053725
! Fit after  self-cal, rms=0.050307Jy  sigma=0.051618
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.456 mas, bmaj=3.234 mas, bpa=-4.915 degrees
! Estimated noise=9.81342 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00941156 Jy
! Component: 100  -  total flux cleaned = -0.011223 Jy
! Component: 150  -  total flux cleaned = -0.0111853 Jy
! Component: 200  -  total flux cleaned = -0.0110569 Jy
! Total flux subtracted in 200 components = -0.0110569 Jy
! Clean residual min=-0.002158 max=0.002803 Jy/beam
! Clean residual mean=-0.000002 rms=0.000641 Jy/beam
! Combined flux in latest and established models = 0.0416822 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 22 components and 0.0416822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.045426Jy  sigma=0.053660
! Fit after  self-cal, rms=0.045463Jy  sigma=0.053646
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (9.2, -23.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00162954 Jy
! Component: 100  -  total flux cleaned = 0.00196751 Jy
! Component: 150  -  total flux cleaned = 0.00210563 Jy
! Component: 200  -  total flux cleaned = 0.00222084 Jy
! Total flux subtracted in 200 components = 0.00222084 Jy
! Clean residual min=-0.001956 max=0.002168 Jy/beam
! Clean residual mean=0.000000 rms=0.000499 Jy/beam
! Combined flux in latest and established models = 0.0439031 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 48 components and 0.0439031 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.045331Jy  sigma=0.053425
! Fit after  self-cal, rms=0.045291Jy  sigma=0.053350
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.045291Jy  sigma=0.053350
! Fit after  self-cal, rms=0.039131Jy  sigma=0.051290
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.466 mas, bmaj=3.212 mas, bpa=-4.916 degrees
! Estimated noise=7.70608 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00709094 Jy
! Component: 100  -  total flux cleaned = -0.00832937 Jy
! Component: 150  -  total flux cleaned = -0.00841033 Jy
! Component: 200  -  total flux cleaned = -0.00836793 Jy
! Total flux subtracted in 200 components = -0.00836793 Jy
! Clean residual min=-0.001374 max=0.001546 Jy/beam
! Clean residual mean=0.000001 rms=0.000357 Jy/beam
! Combined flux in latest and established models = 0.0355351 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 52 components and 0.0355351 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.035526Jy  sigma=0.053221
! Fit after  self-cal, rms=0.035482Jy  sigma=0.053157
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000402844 Jy
! Component: 100  -  total flux cleaned = 0.000402751 Jy
! Component: 150  -  total flux cleaned = 0.000419791 Jy
! Component: 200  -  total flux cleaned = 0.000447884 Jy
! Total flux subtracted in 200 components = 0.000447884 Jy
! Clean residual min=-0.001332 max=0.001413 Jy/beam
! Clean residual mean=0.000001 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.035983 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 60 components and 0.035983 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.035428Jy  sigma=0.053153
! Fit after  self-cal, rms=0.035438Jy  sigma=0.053137
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.035438Jy  sigma=0.053137
! Fit after  self-cal, rms=0.030647Jy  sigma=0.051113
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.498 mas, bmaj=3.422 mas, bpa=-1.909 degrees
! Estimated noise=6.67097 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00544808 Jy
! Component: 100  -  total flux cleaned = -0.00665207 Jy
! Component: 150  -  total flux cleaned = -0.00704045 Jy
! Component: 200  -  total flux cleaned = -0.00714626 Jy
! Total flux subtracted in 200 components = -0.00714626 Jy
! Clean residual min=-0.001180 max=0.001104 Jy/beam
! Clean residual mean=0.000002 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.0288367 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 68 components and 0.0288367 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.027891Jy  sigma=0.053056
! Fit after  self-cal, rms=0.027879Jy  sigma=0.053025
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.40614e-05 Jy
! Component: 100  -  total flux cleaned = -2.44813e-05 Jy
! Component: 150  -  total flux cleaned = -1.55989e-05 Jy
! Component: 200  -  total flux cleaned = -7.37321e-06 Jy
! Total flux subtracted in 200 components = -7.37321e-06 Jy
! Clean residual min=-0.001132 max=0.001093 Jy/beam
! Clean residual mean=0.000002 rms=0.000281 Jy/beam
! Combined flux in latest and established models = 0.0288294 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 90 components and 0.0288294 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.027844Jy  sigma=0.053064
! Fit after  self-cal, rms=0.027843Jy  sigma=0.053062
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.478 mas, bmaj=3.197 mas, bpa=-4.959 degrees
! Estimated noise=6.06897 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.478 x 3.197 at -4.959 degrees (North through East)
! Clean map  min=-0.0018686  max=0.025311 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.086 mas, bmaj=3.136 mas, bpa=-4.376 degrees
! Estimated noise=10.0362 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0196577 Jy
! Component: 100  -  total flux cleaned = 0.0236615 Jy
! Component: 150  -  total flux cleaned = 0.023859 Jy
! Component: 200  -  total flux cleaned = 0.0244307 Jy
! Total flux subtracted in 200 components = 0.0244307 Jy
! Clean residual min=-0.002234 max=0.002073 Jy/beam
! Clean residual mean=-0.000003 rms=0.000526 Jy/beam
! Combined flux in latest and established models = 0.0244307 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.0244307 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.478 mas, bmaj=3.197 mas, bpa=-4.959 degrees
! Estimated noise=6.06897 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00181725 Jy
! Component: 100  -  total flux cleaned = 0.00271317 Jy
! Component: 150  -  total flux cleaned = 0.00301076 Jy
! Component: 200  -  total flux cleaned = 0.00320542 Jy
! Total flux subtracted in 200 components = 0.00320542 Jy
! Clean residual min=-0.001302 max=0.001319 Jy/beam
! Clean residual mean=-0.000000 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.0276361 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 45 components and 0.0276361 Jy
! Inverting map 
! Added new window around map position (-6.2, 15).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000782318 Jy
! Component: 100  -  total flux cleaned = 0.000938806 Jy
! Component: 150  -  total flux cleaned = 0.00104879 Jy
! Component: 200  -  total flux cleaned = 0.00110425 Jy
! Total flux subtracted in 200 components = 0.00110425 Jy
! Clean residual min=-0.001017 max=0.000892 Jy/beam
! Clean residual mean=0.000001 rms=0.000246 Jy/beam
! Combined flux in latest and established models = 0.0287404 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 58 components and 0.0287404 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.498 mas, bmaj=3.422 mas, bpa=-1.909 degrees
! Estimated noise=6.67097 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.39041e-05 Jy
! Component: 100  -  total flux cleaned = 5.75595e-05 Jy
! Component: 150  -  total flux cleaned = 9.40368e-05 Jy
! Component: 200  -  total flux cleaned = 9.3759e-05 Jy
! Total flux subtracted in 200 components = 9.3759e-05 Jy
! Clean residual min=-0.000965 max=0.000952 Jy/beam
! Clean residual mean=0.000002 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.0288342 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.06505e-05 Jy
! Component: 100  -  total flux cleaned = 3.02231e-05 Jy
! Component: 150  -  total flux cleaned = 3.93121e-05 Jy
! Component: 200  -  total flux cleaned = 3.95754e-05 Jy
! Total flux subtracted in 200 components = 3.95754e-05 Jy
! Clean residual min=-0.000958 max=0.000960 Jy/beam
! Clean residual mean=0.000002 rms=0.000240 Jy/beam
! Combined flux in latest and established models = 0.0288737 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 89 components and 0.0288737 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.478 mas, bmaj=3.197 mas, bpa=-4.959 degrees
! Estimated noise=6.06897 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.46994e-05 Jy
! Component: 100  -  total flux cleaned = 0.000113148 Jy
! Component: 150  -  total flux cleaned = 0.000121949 Jy
! Component: 200  -  total flux cleaned = 0.000121982 Jy
! Total flux subtracted in 200 components = 0.000121982 Jy
! Clean residual min=-0.000883 max=0.000903 Jy/beam
! Clean residual mean=0.000001 rms=0.000221 Jy/beam
! Combined flux in latest and established models = 0.0289957 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 113 components and 0.0289957 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.027725Jy  sigma=0.053144
! Fit after  self-cal, rms=0.027709Jy  sigma=0.053111
wmodel /g0/scr/pima/npcsb_uvs/J1522+7645_X_map.mod
! Writing 113 model components to file: /g0/scr/pima/npcsb_uvs/J1522+7645_X_map.mod
wobs /g0/scr/pima/npcsb_uvs/J1522+7645_X_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1522+7645_X_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J1522+7645_X_map.win
! wwins: Wrote 3 windows to /g0/scr/pima/npcsb_uvs/J1522+7645_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -5.56221e-06 Jy
! Component: 100  -  total flux cleaned = -5.17877e-05 Jy
! Component: 150  -  total flux cleaned = -0.000153343 Jy
! Component: 200  -  total flux cleaned = -0.000236503 Jy
! Component: 250  -  total flux cleaned = -0.000342744 Jy
! Component: 300  -  total flux cleaned = -0.000419284 Jy
! Component: 350  -  total flux cleaned = -0.000406438 Jy
! Component: 400  -  total flux cleaned = -0.000417797 Jy
! Component: 450  -  total flux cleaned = -0.000393989 Jy
! Component: 500  -  total flux cleaned = -0.000371362 Jy
! Component: 550  -  total flux cleaned = -0.000403962 Jy
! Component: 600  -  total flux cleaned = -0.000424825 Jy
! Component: 650  -  total flux cleaned = -0.00046596 Jy
! Component: 700  -  total flux cleaned = -0.000516957 Jy
! Component: 750  -  total flux cleaned = -0.000586668 Jy
! Component: 800  -  total flux cleaned = -0.000664846 Jy
! Component: 850  -  total flux cleaned = -0.00073184 Jy
! Component: 900  -  total flux cleaned = -0.000807564 Jy
! Component: 950  -  total flux cleaned = -0.000872674 Jy
! Component: 1000  -  total flux cleaned = -0.000927507 Jy
! Component: 1050  -  total flux cleaned = -0.000945497 Jy
! Component: 1100  -  total flux cleaned = -0.000998596 Jy
! Component: 1150  -  total flux cleaned = -0.00102469 Jy
! Component: 1200  -  total flux cleaned = -0.00103318 Jy
! Component: 1250  -  total flux cleaned = -0.00106738 Jy
! Component: 1300  -  total flux cleaned = -0.00108429 Jy
! Component: 1350  -  total flux cleaned = -0.00109266 Jy
! Component: 1400  -  total flux cleaned = -0.00110087 Jy
! Component: 1450  -  total flux cleaned = -0.00111733 Jy
! Component: 1500  -  total flux cleaned = -0.00112539 Jy
! Component: 1550  -  total flux cleaned = -0.00112529 Jy
! Component: 1600  -  total flux cleaned = -0.0011412 Jy
! Component: 1650  -  total flux cleaned = -0.00113338 Jy
! Component: 1700  -  total flux cleaned = -0.001149 Jy
! Component: 1750  -  total flux cleaned = -0.00114893 Jy
! Component: 1800  -  total flux cleaned = -0.00115657 Jy
! Component: 1850  -  total flux cleaned = -0.00114911 Jy
! Component: 1900  -  total flux cleaned = -0.00117164 Jy
! Component: 1950  -  total flux cleaned = -0.00116422 Jy
! Component: 2000  -  total flux cleaned = -0.00117163 Jy
! Component: 2050  -  total flux cleaned = -0.00117898 Jy
! Component: 2100  -  total flux cleaned = -0.00120065 Jy
! Component: 2150  -  total flux cleaned = -0.00121494 Jy
! Component: 2200  -  total flux cleaned = -0.0012149 Jy
! Component: 2250  -  total flux cleaned = -0.001229 Jy
! Component: 2300  -  total flux cleaned = -0.00122203 Jy
! Component: 2350  -  total flux cleaned = -0.00122214 Jy
! Component: 2400  -  total flux cleaned = -0.00121524 Jy
! Component: 2450  -  total flux cleaned = -0.00119476 Jy
! Component: 2500  -  total flux cleaned = -0.00118798 Jy
! Component: 2550  -  total flux cleaned = -0.00118122 Jy
! Component: 2600  -  total flux cleaned = -0.00116108 Jy
! Component: 2650  -  total flux cleaned = -0.0011477 Jy
! Component: 2700  -  total flux cleaned = -0.00111452 Jy
! Component: 2750  -  total flux cleaned = -0.00110132 Jy
! Component: 2800  -  total flux cleaned = -0.00108169 Jy
! Component: 2850  -  total flux cleaned = -0.00109476 Jy
! Component: 2900  -  total flux cleaned = -0.00106869 Jy
! Component: 2950  -  total flux cleaned = -0.00106223 Jy
! Component: 3000  -  total flux cleaned = -0.00104935 Jy
! Component: 3050  -  total flux cleaned = -0.00103004 Jy
! Component: 3100  -  total flux cleaned = -0.0010108 Jy
! Component: 3150  -  total flux cleaned = -0.000985242 Jy
! Component: 3200  -  total flux cleaned = -0.000966126 Jy
! Component: 3250  -  total flux cleaned = -0.000953428 Jy
! Component: 3300  -  total flux cleaned = -0.000947058 Jy
! Component: 3350  -  total flux cleaned = -0.000915329 Jy
! Component: 3400  -  total flux cleaned = -0.000890027 Jy
! Component: 3450  -  total flux cleaned = -0.000871078 Jy
! Component: 3500  -  total flux cleaned = -0.000852148 Jy
! Component: 3550  -  total flux cleaned = -0.000826966 Jy
! Component: 3600  -  total flux cleaned = -0.00082693 Jy
! Component: 3650  -  total flux cleaned = -0.000801812 Jy
! Component: 3700  -  total flux cleaned = -0.000789295 Jy
! Component: 3750  -  total flux cleaned = -0.000770479 Jy
! Component: 3800  -  total flux cleaned = -0.00075792 Jy
! Component: 3850  -  total flux cleaned = -0.000739115 Jy
! Component: 3900  -  total flux cleaned = -0.000732803 Jy
! Component: 3950  -  total flux cleaned = -0.000726541 Jy
! Component: 4000  -  total flux cleaned = -0.000714026 Jy
! Component: 4050  -  total flux cleaned = -0.000701506 Jy
! Total flux subtracted in 4096 components = -0.000676444 Jy
! Clean residual min=-0.000350 max=0.000372 Jy/beam
! Clean residual mean=0.000001 rms=0.000106 Jy/beam
! Combined flux in latest and established models = 0.0283193 Jy
keep
! Adding 245 model components to the UV plane model.
! The established model now contains 358 components and 0.0283193 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J1522+7645_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.478 x 3.197 at -4.959 degrees (North through East)
! Clean map  min=-0.0018458  max=0.024356 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1522+7645_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0243564 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000101159 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.24599 1.24599 2.49198 4.98395 9.9679 19.9358 39.8716 79.7432
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0003 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.024 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J1522+7645_X_uvs.log closed on Sat Oct  5 18:53:39 2013