! Started logfile: /g0/scr/pima/npcsb_uvs/J1522+7645_S_uvs.log on Sat Oct  5 18:59:32 2013
obs /g0/scr/pima/npcsb_uvs/J1522+7645_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1522+7645_S_uva.fits
! AN table 1: 47 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.785714 visibilities/baseline/integration-bin.
! Found source: J1522+7645
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 4136 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1522+7645_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004139Jy  sigma=0.725704
! Fit after  self-cal, rms=0.959222Jy  sigma=0.657909
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.284 mas, bmaj=9.954 mas, bpa=8.308 degrees
! Estimated noise=29.1727 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.050011 Jy
! Component: 100  -  total flux cleaned = 0.0613127 Jy
! Total flux subtracted in 100 components = 0.0613127 Jy
! Clean residual min=-0.007482 max=0.007505 Jy/beam
! Clean residual mean=0.000001 rms=0.002026 Jy/beam
! Combined flux in latest and established models = 0.0613127 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0613127 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079479Jy  sigma=0.064002
! Fit after  self-cal, rms=0.078394Jy  sigma=0.063234
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.497 mas, bmaj=11.66 mas, bpa=16.3 degrees
! Estimated noise=17.7217 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00817666 Jy
! Component: 100  -  total flux cleaned = 0.0130423 Jy
! Component: 150  -  total flux cleaned = 0.016336 Jy
! Component: 200  -  total flux cleaned = 0.0185743 Jy
! Total flux subtracted in 200 components = 0.0185743 Jy
! Clean residual min=-0.007408 max=0.006020 Jy/beam
! Clean residual mean=-0.000007 rms=0.001810 Jy/beam
! Combined flux in latest and established models = 0.0798871 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 37 components and 0.0798871 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079987Jy  sigma=0.061035
! Fit after  self-cal, rms=0.079861Jy  sigma=0.060974
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.91     HN        1.00*    KP        1.00     
!   LA        0.95     NL        0.77     OV        0.97     PT        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.98     HN        1.00*    KP        0.86     
!   LA        0.94     NL        0.96     OV        0.98     PT        0.83     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.78     FD        0.93     HN        1.00*    KP        0.87     
!   LA        0.63     NL        0.88     OV        0.90     PT        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.85     FD        0.93     HN        1.00*    KP        0.93     
!   LA        0.51     NL        1.02     OV        0.79     PT        0.91     
! 
! 
! Fit before self-cal, rms=0.079861Jy  sigma=0.060974
! Fit after  self-cal, rms=0.066738Jy  sigma=0.056686
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.566 mas, bmaj=11.77 mas, bpa=17.77 degrees
! Estimated noise=13.4488 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0123887 Jy
! Component: 100  -  total flux cleaned = -0.0151228 Jy
! Component: 150  -  total flux cleaned = -0.0160438 Jy
! Component: 200  -  total flux cleaned = -0.0163538 Jy
! Total flux subtracted in 200 components = -0.0163538 Jy
! Clean residual min=-0.002696 max=0.003129 Jy/beam
! Clean residual mean=0.000000 rms=0.000771 Jy/beam
! Combined flux in latest and established models = 0.0635333 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 66 components and 0.0635333 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060495Jy  sigma=0.058659
! Fit after  self-cal, rms=0.060781Jy  sigma=0.058407
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060781Jy  sigma=0.058407
! Fit after  self-cal, rms=0.052339Jy  sigma=0.056251
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.547 mas, bmaj=11.77 mas, bpa=18.47 degrees
! Estimated noise=10.4274 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00948215 Jy
! Component: 100  -  total flux cleaned = -0.0115645 Jy
! Component: 150  -  total flux cleaned = -0.0122514 Jy
! Component: 200  -  total flux cleaned = -0.0126555 Jy
! Total flux subtracted in 200 components = -0.0126555 Jy
! Clean residual min=-0.001941 max=0.002305 Jy/beam
! Clean residual mean=0.000000 rms=0.000557 Jy/beam
! Combined flux in latest and established models = 0.0508778 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 88 components and 0.0508778 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047632Jy  sigma=0.058253
! Fit after  self-cal, rms=0.047666Jy  sigma=0.058210
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.79499e-05 Jy
! Component: 100  -  total flux cleaned = -4.29969e-05 Jy
! Component: 150  -  total flux cleaned = -3.13011e-05 Jy
! Component: 200  -  total flux cleaned = -2.05847e-05 Jy
! Total flux subtracted in 200 components = -2.05847e-05 Jy
! Clean residual min=-0.002197 max=0.002275 Jy/beam
! Clean residual mean=-0.000000 rms=0.000578 Jy/beam
! Combined flux in latest and established models = 0.0508572 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 100 components and 0.0508572 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047614Jy  sigma=0.058255
! Fit after  self-cal, rms=0.047602Jy  sigma=0.058251
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047602Jy  sigma=0.058251
! Fit after  self-cal, rms=0.040547Jy  sigma=0.056151
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.502 mas, bmaj=11.74 mas, bpa=18.83 degrees
! Estimated noise=8.0841 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00705415 Jy
! Component: 100  -  total flux cleaned = -0.00862131 Jy
! Component: 150  -  total flux cleaned = -0.00926663 Jy
! Component: 200  -  total flux cleaned = -0.00968957 Jy
! Total flux subtracted in 200 components = -0.00968957 Jy
! Clean residual min=-0.001647 max=0.001746 Jy/beam
! Clean residual mean=-0.000000 rms=0.000446 Jy/beam
! Combined flux in latest and established models = 0.0411676 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 118 components and 0.0411676 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.037108Jy  sigma=0.058100
! Fit after  self-cal, rms=0.037108Jy  sigma=0.058090
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000341199 Jy
! Component: 100  -  total flux cleaned = -0.000386029 Jy
! Component: 150  -  total flux cleaned = -0.00040162 Jy
! Component: 200  -  total flux cleaned = -0.000416636 Jy
! Total flux subtracted in 200 components = -0.000416636 Jy
! Clean residual min=-0.001701 max=0.001750 Jy/beam
! Clean residual mean=0.000000 rms=0.000448 Jy/beam
! Combined flux in latest and established models = 0.040751 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 124 components and 0.040751 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.037050Jy  sigma=0.058169
! Fit after  self-cal, rms=0.037058Jy  sigma=0.058164
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.037058Jy  sigma=0.058164
! Fit after  self-cal, rms=0.031538Jy  sigma=0.056096
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.694 mas, bmaj=12.81 mas, bpa=21.54 degrees
! Estimated noise=6.43956 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00556102 Jy
! Component: 100  -  total flux cleaned = -0.00688279 Jy
! Component: 150  -  total flux cleaned = -0.00752231 Jy
! Component: 200  -  total flux cleaned = -0.00792279 Jy
! Total flux subtracted in 200 components = -0.00792279 Jy
! Clean residual min=-0.001242 max=0.001308 Jy/beam
! Clean residual mean=-0.000000 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.0328282 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 134 components and 0.0328282 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.028878Jy  sigma=0.058039
! Fit after  self-cal, rms=0.028872Jy  sigma=0.058025
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000266166 Jy
! Component: 100  -  total flux cleaned = -0.000300295 Jy
! Component: 150  -  total flux cleaned = -0.000310802 Jy
! Component: 200  -  total flux cleaned = -0.000315306 Jy
! Total flux subtracted in 200 components = -0.000315306 Jy
! Clean residual min=-0.001272 max=0.001303 Jy/beam
! Clean residual mean=0.000000 rms=0.000357 Jy/beam
! Combined flux in latest and established models = 0.0325129 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 142 components and 0.0325129 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.028823Jy  sigma=0.058116
! Fit after  self-cal, rms=0.028827Jy  sigma=0.058114
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=8.454 mas, bmaj=11.72 mas, bpa=18.92 degrees
! Estimated noise=6.26958 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.454 x 11.72 at 18.92 degrees (North through East)
! Clean map  min=-0.001363  max=0.023818 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.288 mas, bmaj=9.995 mas, bpa=10.79 degrees
! Estimated noise=10.5494 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0178943 Jy
! Component: 100  -  total flux cleaned = 0.0226317 Jy
! Component: 150  -  total flux cleaned = 0.0254881 Jy
! Component: 200  -  total flux cleaned = 0.027636 Jy
! Total flux subtracted in 200 components = 0.027636 Jy
! Clean residual min=-0.002355 max=0.002422 Jy/beam
! Clean residual mean=0.000000 rms=0.000710 Jy/beam
! Combined flux in latest and established models = 0.027636 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.027636 Jy
! Inverting map and beam 
! Estimated beam: bmin=8.454 mas, bmaj=11.72 mas, bpa=18.92 degrees
! Estimated noise=6.26958 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00181901 Jy
! Component: 100  -  total flux cleaned = 0.00298705 Jy
! Component: 150  -  total flux cleaned = 0.00378452 Jy
! Component: 200  -  total flux cleaned = 0.00406926 Jy
! Total flux subtracted in 200 components = 0.00406926 Jy
! Clean residual min=-0.001540 max=0.001348 Jy/beam
! Clean residual mean=0.000000 rms=0.000379 Jy/beam
! Combined flux in latest and established models = 0.0317053 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 46 components and 0.0317053 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.694 mas, bmaj=12.81 mas, bpa=21.54 degrees
! Estimated noise=6.43956 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00027704 Jy
! Component: 100  -  total flux cleaned = 0.000392359 Jy
! Component: 150  -  total flux cleaned = 0.000488635 Jy
! Component: 200  -  total flux cleaned = 0.000560991 Jy
! Total flux subtracted in 200 components = 0.000560991 Jy
! Clean residual min=-0.001292 max=0.001245 Jy/beam
! Clean residual mean=0.000000 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.0322662 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.23333e-05 Jy
! Component: 100  -  total flux cleaned = 9.68073e-05 Jy
! Component: 150  -  total flux cleaned = 0.000110115 Jy
! Component: 200  -  total flux cleaned = 0.000129324 Jy
! Total flux subtracted in 200 components = 0.000129324 Jy
! Clean residual min=-0.001278 max=0.001255 Jy/beam
! Clean residual mean=0.000000 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.0323956 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 64 components and 0.0323956 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=8.454 mas, bmaj=11.72 mas, bpa=18.92 degrees
! Estimated noise=6.26958 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.48282e-05 Jy
! Component: 100  -  total flux cleaned = 4.43699e-05 Jy
! Component: 150  -  total flux cleaned = 5.42527e-05 Jy
! Component: 200  -  total flux cleaned = 7.27331e-05 Jy
! Total flux subtracted in 200 components = 7.27331e-05 Jy
! Clean residual min=-0.001386 max=0.001340 Jy/beam
! Clean residual mean=-0.000000 rms=0.000357 Jy/beam
! Combined flux in latest and established models = 0.0324683 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 71 components and 0.0324683 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.028810Jy  sigma=0.058215
! Fit after  self-cal, rms=0.028816Jy  sigma=0.058206
wmodel /g0/scr/pima/npcsb_uvs/J1522+7645_S_map.mod
! Writing 71 model components to file: /g0/scr/pima/npcsb_uvs/J1522+7645_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J1522+7645_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1522+7645_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J1522+7645_S_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsb_uvs/J1522+7645_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000126871 Jy
! Component: 100  -  total flux cleaned = -0.000209929 Jy
! Component: 150  -  total flux cleaned = -0.000322755 Jy
! Component: 200  -  total flux cleaned = -0.000373103 Jy
! Component: 250  -  total flux cleaned = -0.000372777 Jy
! Component: 300  -  total flux cleaned = -0.0003725 Jy
! Component: 350  -  total flux cleaned = -0.000320043 Jy
! Component: 400  -  total flux cleaned = -0.000245172 Jy
! Component: 450  -  total flux cleaned = -0.000173374 Jy
! Component: 500  -  total flux cleaned = -0.000115794 Jy
! Component: 550  -  total flux cleaned = -7.18299e-05 Jy
! Component: 600  -  total flux cleaned = -2.94255e-05 Jy
! Component: 650  -  total flux cleaned = 1.15022e-05 Jy
! Component: 700  -  total flux cleaned = 5.12258e-05 Jy
! Component: 750  -  total flux cleaned = 9.94053e-05 Jy
! Component: 800  -  total flux cleaned = 0.000127486 Jy
! Component: 850  -  total flux cleaned = 0.000118387 Jy
! Component: 900  -  total flux cleaned = 0.000163124 Jy
! Component: 950  -  total flux cleaned = 0.000224161 Jy
! Component: 1000  -  total flux cleaned = 0.000300979 Jy
! Component: 1050  -  total flux cleaned = 0.000342773 Jy
! Component: 1100  -  total flux cleaned = 0.000375802 Jy
! Component: 1150  -  total flux cleaned = 0.000448587 Jy
! Component: 1200  -  total flux cleaned = 0.000496144 Jy
! Component: 1250  -  total flux cleaned = 0.000558486 Jy
! Component: 1300  -  total flux cleaned = 0.000604356 Jy
! Component: 1350  -  total flux cleaned = 0.000664606 Jy
! Component: 1400  -  total flux cleaned = 0.00071635 Jy
! Component: 1450  -  total flux cleaned = 0.000752818 Jy
! Component: 1500  -  total flux cleaned = 0.000788833 Jy
! Component: 1550  -  total flux cleaned = 0.00083135 Jy
! Component: 1600  -  total flux cleaned = 0.0008593 Jy
! Component: 1650  -  total flux cleaned = 0.000873084 Jy
! Component: 1700  -  total flux cleaned = 0.00088663 Jy
! Component: 1750  -  total flux cleaned = 0.000900071 Jy
! Component: 1800  -  total flux cleaned = 0.00090677 Jy
! Component: 1850  -  total flux cleaned = 0.000919894 Jy
! Component: 1900  -  total flux cleaned = 0.000913459 Jy
! Component: 1950  -  total flux cleaned = 0.000945411 Jy
! Component: 2000  -  total flux cleaned = 0.000958078 Jy
! Component: 2050  -  total flux cleaned = 0.00100214 Jy
! Component: 2100  -  total flux cleaned = 0.00102707 Jy
! Component: 2150  -  total flux cleaned = 0.00106413 Jy
! Component: 2200  -  total flux cleaned = 0.00110087 Jy
! Component: 2250  -  total flux cleaned = 0.00110696 Jy
! Component: 2300  -  total flux cleaned = 0.00113112 Jy
! Component: 2350  -  total flux cleaned = 0.0011371 Jy
! Component: 2400  -  total flux cleaned = 0.00116089 Jy
! Component: 2450  -  total flux cleaned = 0.00116091 Jy
! Component: 2500  -  total flux cleaned = 0.0011961 Jy
! Component: 2550  -  total flux cleaned = 0.00120774 Jy
! Component: 2600  -  total flux cleaned = 0.00121928 Jy
! Component: 2650  -  total flux cleaned = 0.00120777 Jy
! Component: 2700  -  total flux cleaned = 0.00121923 Jy
! Component: 2750  -  total flux cleaned = 0.00122497 Jy
! Component: 2800  -  total flux cleaned = 0.00123629 Jy
! Component: 2850  -  total flux cleaned = 0.00125314 Jy
! Component: 2900  -  total flux cleaned = 0.00125869 Jy
! Component: 2950  -  total flux cleaned = 0.00124756 Jy
! Component: 3000  -  total flux cleaned = 0.00126972 Jy
! Component: 3050  -  total flux cleaned = 0.00126425 Jy
! Component: 3100  -  total flux cleaned = 0.00127518 Jy
! Component: 3150  -  total flux cleaned = 0.00126431 Jy
! Component: 3200  -  total flux cleaned = 0.0012806 Jy
! Component: 3250  -  total flux cleaned = 0.00129137 Jy
! Component: 3300  -  total flux cleaned = 0.00129136 Jy
! Component: 3350  -  total flux cleaned = 0.00130203 Jy
! Component: 3400  -  total flux cleaned = 0.00130735 Jy
! Component: 3450  -  total flux cleaned = 0.00131265 Jy
! Component: 3500  -  total flux cleaned = 0.00131264 Jy
! Component: 3550  -  total flux cleaned = 0.00132843 Jy
! Component: 3600  -  total flux cleaned = 0.00133369 Jy
! Component: 3650  -  total flux cleaned = 0.00133891 Jy
! Component: 3700  -  total flux cleaned = 0.0013597 Jy
! Component: 3750  -  total flux cleaned = 0.00135449 Jy
! Component: 3800  -  total flux cleaned = 0.00135965 Jy
! Component: 3850  -  total flux cleaned = 0.00136478 Jy
! Component: 3900  -  total flux cleaned = 0.00136992 Jy
! Component: 3950  -  total flux cleaned = 0.00137506 Jy
! Component: 4000  -  total flux cleaned = 0.00139549 Jy
! Component: 4050  -  total flux cleaned = 0.00141586 Jy
! Total flux subtracted in 4096 components = 0.00143623 Jy
! Clean residual min=-0.000300 max=0.000353 Jy/beam
! Clean residual mean=-0.000001 rms=0.000093 Jy/beam
! Combined flux in latest and established models = 0.0339045 Jy
keep
! Adding 282 model components to the UV plane model.
! The established model now contains 353 components and 0.0339046 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J1522+7645_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.454 x 11.72 at 18.92 degrees (North through East)
! Clean map  min=-0.00086872  max=0.023759 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1522+7645_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0237592 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 9.08993e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.14776 1.14776 2.29552 4.59104 9.18207 18.3641 36.7283 73.4566
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0002 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.023 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J1522+7645_S_uvs.log closed on Sat Oct  5 18:59:36 2013