! Started logfile: /g0/scr/pima/npcsb_uvs/J1422+7704_S_uvs.log on Sat Oct  5 18:59:22 2013
obs /g0/scr/pima/npcsb_uvs/J1422+7704_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1422+7704_S_uva.fits
! AN table 1: 46 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.6 visibilities/baseline/integration-bin.
! Found source: J1422+7704
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 4968 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1422+7704_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.004686Jy  sigma=1.176977
! Fit after  self-cal, rms=0.911774Jy  sigma=0.971286
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.41 mas, bmaj=10.65 mas, bpa=-10.89 degrees
! Estimated noise=23.238 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0985767 Jy
! Component: 100  -  total flux cleaned = 0.133568 Jy
! Total flux subtracted in 100 components = 0.133568 Jy
! Clean residual min=-0.022528 max=0.029289 Jy/beam
! Clean residual mean=0.000222 rms=0.008411 Jy/beam
! Combined flux in latest and established models = 0.133568 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 38 components and 0.133568 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.116438Jy  sigma=0.160463
! Fit after  self-cal, rms=0.115669Jy  sigma=0.159963
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.726 mas, bmaj=11.35 mas, bpa=-11.35 degrees
! Estimated noise=9.86571 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0345175 Jy
! Component: 100  -  total flux cleaned = 0.0561894 Jy
! Component: 150  -  total flux cleaned = 0.070041 Jy
! Component: 200  -  total flux cleaned = 0.0789181 Jy
! Total flux subtracted in 200 components = 0.0789181 Jy
! Clean residual min=-0.029571 max=0.024210 Jy/beam
! Clean residual mean=0.000119 rms=0.008094 Jy/beam
! Combined flux in latest and established models = 0.212486 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 65 components and 0.212486 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113669Jy  sigma=0.134938
! Fit after  self-cal, rms=0.113595Jy  sigma=0.134613
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.72     FD        0.87     HN        0.85     KP        1.13     
!   LA        0.90     MK        0.60     NL        0.97     OV        1.49     
!   PT        0.92     SC        0.58     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.84     FD        0.88     HN        1.09     KP        1.08     
!   LA        0.86     MK        0.59     NL        0.97     OV        1.51     
!   PT        0.93     SC        0.59     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.97     HN        1.02     KP        0.98     
!   LA        0.67     MK        0.63     NL        1.02     OV        1.65     
!   PT        1.10     SC        0.68     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.93     HN        0.92     KP        0.88     
!   LA        0.59     MK        0.79     NL        0.97     OV        1.54     
!   PT        0.98     SC        0.73     
! 
! 
! Fit before self-cal, rms=0.113595Jy  sigma=0.134613
! Fit after  self-cal, rms=0.114899Jy  sigma=0.114603
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.262 mas, bmaj=11.28 mas, bpa=-9.632 degrees
! Estimated noise=8.29601 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0136912 Jy
! Component: 100  -  total flux cleaned = -0.017601 Jy
! Component: 150  -  total flux cleaned = -0.0183009 Jy
! Component: 200  -  total flux cleaned = -0.0188669 Jy
! Total flux subtracted in 200 components = -0.0188669 Jy
! Clean residual min=-0.011790 max=0.015408 Jy/beam
! Clean residual mean=0.000009 rms=0.003944 Jy/beam
! Combined flux in latest and established models = 0.193619 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 82 components and 0.193619 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109565Jy  sigma=0.117335
! Fit after  self-cal, rms=0.110425Jy  sigma=0.116624
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110425Jy  sigma=0.116624
! Fit after  self-cal, rms=0.102985Jy  sigma=0.113804
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.103 mas, bmaj=11.17 mas, bpa=-9.049 degrees
! Estimated noise=7.198 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0115685 Jy
! Component: 100  -  total flux cleaned = -0.0153744 Jy
! Component: 150  -  total flux cleaned = -0.01664 Jy
! Component: 200  -  total flux cleaned = -0.0172395 Jy
! Total flux subtracted in 200 components = -0.0172395 Jy
! Clean residual min=-0.010658 max=0.013493 Jy/beam
! Clean residual mean=0.000014 rms=0.003466 Jy/beam
! Combined flux in latest and established models = 0.17638 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 94 components and 0.17638 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098635Jy  sigma=0.116446
! Fit after  self-cal, rms=0.098673Jy  sigma=0.116385
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000196486 Jy
! Component: 100  -  total flux cleaned = -0.000649701 Jy
! Component: 150  -  total flux cleaned = -0.000761749 Jy
! Component: 200  -  total flux cleaned = -0.000859548 Jy
! Total flux subtracted in 200 components = -0.000859548 Jy
! Clean residual min=-0.010701 max=0.013375 Jy/beam
! Clean residual mean=0.000016 rms=0.003482 Jy/beam
! Combined flux in latest and established models = 0.17552 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 100 components and 0.17552 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098475Jy  sigma=0.116480
! Fit after  self-cal, rms=0.098511Jy  sigma=0.116421
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098511Jy  sigma=0.116421
! Fit after  self-cal, rms=0.090076Jy  sigma=0.113649
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.017 mas, bmaj=11.11 mas, bpa=-8.786 degrees
! Estimated noise=6.27492 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0100068 Jy
! Component: 100  -  total flux cleaned = -0.0135039 Jy
! Component: 150  -  total flux cleaned = -0.0155572 Jy
! Component: 200  -  total flux cleaned = -0.016338 Jy
! Total flux subtracted in 200 components = -0.016338 Jy
! Clean residual min=-0.009369 max=0.011793 Jy/beam
! Clean residual mean=0.000015 rms=0.003030 Jy/beam
! Combined flux in latest and established models = 0.159182 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 107 components and 0.159182 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086317Jy  sigma=0.116351
! Fit after  self-cal, rms=0.086309Jy  sigma=0.116299
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000125258 Jy
! Component: 100  -  total flux cleaned = -0.000306873 Jy
! Component: 150  -  total flux cleaned = -0.000388681 Jy
! Component: 200  -  total flux cleaned = -0.00050135 Jy
! Total flux subtracted in 200 components = -0.00050135 Jy
! Clean residual min=-0.009357 max=0.011700 Jy/beam
! Clean residual mean=0.000016 rms=0.003035 Jy/beam
! Combined flux in latest and established models = 0.158681 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 110 components and 0.158681 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086189Jy  sigma=0.116357
! Fit after  self-cal, rms=0.086215Jy  sigma=0.116320
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086215Jy  sigma=0.116320
! Fit after  self-cal, rms=0.079006Jy  sigma=0.113569
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.437 mas, bmaj=12.37 mas, bpa=-4.928 degrees
! Estimated noise=5.81507 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0097367 Jy
! Component: 100  -  total flux cleaned = -0.0127718 Jy
! Component: 150  -  total flux cleaned = -0.0141916 Jy
! Component: 200  -  total flux cleaned = -0.014577 Jy
! Total flux subtracted in 200 components = -0.014577 Jy
! Clean residual min=-0.010489 max=0.013682 Jy/beam
! Clean residual mean=0.000018 rms=0.003762 Jy/beam
! Combined flux in latest and established models = 0.144104 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 139 components and 0.144104 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075614Jy  sigma=0.116717
! Fit after  self-cal, rms=0.075577Jy  sigma=0.116446
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00015187 Jy
! Component: 100  -  total flux cleaned = -0.000248861 Jy
! Component: 150  -  total flux cleaned = -0.00030543 Jy
! Component: 200  -  total flux cleaned = -0.000329623 Jy
! Total flux subtracted in 200 components = -0.000329623 Jy
! Clean residual min=-0.010575 max=0.013651 Jy/beam
! Clean residual mean=0.000020 rms=0.003762 Jy/beam
! Combined flux in latest and established models = 0.143774 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 141 components and 0.143774 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075528Jy  sigma=0.116443
! Fit after  self-cal, rms=0.075567Jy  sigma=0.116389
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.938 mas, bmaj=11.07 mas, bpa=-8.576 degrees
! Estimated noise=5.48505 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.938 x 11.07 at -8.576 degrees (North through East)
! Clean map  min=-0.0081497  max=0.060399 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.804 mas, bmaj=10.49 mas, bpa=-8.513 degrees
! Estimated noise=12.0504 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0529181 Jy
! Component: 100  -  total flux cleaned = 0.0770352 Jy
! Component: 150  -  total flux cleaned = 0.0935888 Jy
! Component: 200  -  total flux cleaned = 0.105833 Jy
! Total flux subtracted in 200 components = 0.105833 Jy
! Clean residual min=-0.009829 max=0.011058 Jy/beam
! Clean residual mean=0.000085 rms=0.003211 Jy/beam
! Combined flux in latest and established models = 0.105833 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 49 model components to the UV plane model.
! The established model now contains 49 components and 0.105833 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.938 mas, bmaj=11.07 mas, bpa=-8.576 degrees
! Estimated noise=5.48505 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0130884 Jy
! Component: 100  -  total flux cleaned = 0.0212693 Jy
! Component: 150  -  total flux cleaned = 0.0265736 Jy
! Component: 200  -  total flux cleaned = 0.0300259 Jy
! Total flux subtracted in 200 components = 0.0300259 Jy
! Clean residual min=-0.009065 max=0.010528 Jy/beam
! Clean residual mean=0.000034 rms=0.002967 Jy/beam
! Combined flux in latest and established models = 0.135859 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 67 components and 0.135858 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.437 mas, bmaj=12.37 mas, bpa=-4.928 degrees
! Estimated noise=5.81507 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00280378 Jy
! Component: 100  -  total flux cleaned = 0.00348611 Jy
! Component: 150  -  total flux cleaned = 0.00380023 Jy
! Component: 200  -  total flux cleaned = 0.00394703 Jy
! Total flux subtracted in 200 components = 0.00394703 Jy
! Clean residual min=-0.011494 max=0.013941 Jy/beam
! Clean residual mean=0.000038 rms=0.003939 Jy/beam
! Combined flux in latest and established models = 0.139806 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000140432 Jy
! Component: 100  -  total flux cleaned = 0.000277053 Jy
! Component: 150  -  total flux cleaned = 0.000406317 Jy
! Component: 200  -  total flux cleaned = 0.000589364 Jy
! Total flux subtracted in 200 components = 0.000589364 Jy
! Clean residual min=-0.011345 max=0.013926 Jy/beam
! Clean residual mean=0.000035 rms=0.003900 Jy/beam
! Combined flux in latest and established models = 0.140395 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 76 components and 0.140395 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.938 mas, bmaj=11.07 mas, bpa=-8.576 degrees
! Estimated noise=5.48505 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000793055 Jy
! Component: 100  -  total flux cleaned = -0.000547362 Jy
! Component: 150  -  total flux cleaned = -0.000414068 Jy
! Component: 200  -  total flux cleaned = -0.000293294 Jy
! Total flux subtracted in 200 components = -0.000293294 Jy
! Clean residual min=-0.008570 max=0.010858 Jy/beam
! Clean residual mean=0.000024 rms=0.002766 Jy/beam
! Combined flux in latest and established models = 0.140102 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 87 components and 0.140102 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076109Jy  sigma=0.117549
! Fit after  self-cal, rms=0.076023Jy  sigma=0.117172
wmodel /g0/scr/pima/npcsb_uvs/J1422+7704_S_map.mod
! Writing 87 model components to file: /g0/scr/pima/npcsb_uvs/J1422+7704_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J1422+7704_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1422+7704_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J1422+7704_S_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsb_uvs/J1422+7704_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.0042981 Jy
! Component: 100  -  total flux cleaned = 0.00573485 Jy
! Component: 150  -  total flux cleaned = 0.00697422 Jy
! Component: 200  -  total flux cleaned = 0.00811263 Jy
! Component: 250  -  total flux cleaned = 0.00937671 Jy
! Component: 300  -  total flux cleaned = 0.0106543 Jy
! Component: 350  -  total flux cleaned = 0.0118545 Jy
! Component: 400  -  total flux cleaned = 0.0129855 Jy
! Component: 450  -  total flux cleaned = 0.0138915 Jy
! Component: 500  -  total flux cleaned = 0.0147543 Jy
! Component: 550  -  total flux cleaned = 0.0157323 Jy
! Component: 600  -  total flux cleaned = 0.0168133 Jy
! Component: 650  -  total flux cleaned = 0.0179277 Jy
! Component: 700  -  total flux cleaned = 0.0190702 Jy
! Component: 750  -  total flux cleaned = 0.0199161 Jy
! Component: 800  -  total flux cleaned = 0.0206108 Jy
! Component: 850  -  total flux cleaned = 0.0213471 Jy
! Component: 900  -  total flux cleaned = 0.0220016 Jy
! Component: 950  -  total flux cleaned = 0.0225808 Jy
! Component: 1000  -  total flux cleaned = 0.0232602 Jy
! Component: 1050  -  total flux cleaned = 0.0241437 Jy
! Component: 1100  -  total flux cleaned = 0.0249534 Jy
! Component: 1150  -  total flux cleaned = 0.0257987 Jy
! Component: 1200  -  total flux cleaned = 0.026678 Jy
! Component: 1250  -  total flux cleaned = 0.0277424 Jy
! Component: 1300  -  total flux cleaned = 0.0285877 Jy
! Component: 1350  -  total flux cleaned = 0.029419 Jy
! Component: 1400  -  total flux cleaned = 0.0304273 Jy
! Component: 1450  -  total flux cleaned = 0.0311817 Jy
! Component: 1500  -  total flux cleaned = 0.0317389 Jy
! Component: 1550  -  total flux cleaned = 0.0323338 Jy
! Component: 1600  -  total flux cleaned = 0.0328751 Jy
! Component: 1650  -  total flux cleaned = 0.0334083 Jy
! Component: 1700  -  total flux cleaned = 0.0338469 Jy
! Component: 1750  -  total flux cleaned = 0.0343229 Jy
! Component: 1800  -  total flux cleaned = 0.034793 Jy
! Component: 1850  -  total flux cleaned = 0.0352156 Jy
! Component: 1900  -  total flux cleaned = 0.0356327 Jy
! Component: 1950  -  total flux cleaned = 0.0357975 Jy
! Component: 2000  -  total flux cleaned = 0.0359611 Jy
! Component: 2050  -  total flux cleaned = 0.0362045 Jy
! Component: 2100  -  total flux cleaned = 0.0364054 Jy
! Component: 2150  -  total flux cleaned = 0.0364848 Jy
! Component: 2200  -  total flux cleaned = 0.036564 Jy
! Component: 2250  -  total flux cleaned = 0.0366816 Jy
! Component: 2300  -  total flux cleaned = 0.0366424 Jy
! Component: 2350  -  total flux cleaned = 0.0366812 Jy
! Component: 2400  -  total flux cleaned = 0.0366426 Jy
! Component: 2450  -  total flux cleaned = 0.0366426 Jy
! Component: 2500  -  total flux cleaned = 0.0366426 Jy
! Component: 2550  -  total flux cleaned = 0.0366044 Jy
! Component: 2600  -  total flux cleaned = 0.0366043 Jy
! Component: 2650  -  total flux cleaned = 0.0365288 Jy
! Component: 2700  -  total flux cleaned = 0.0364163 Jy
! Component: 2750  -  total flux cleaned = 0.036379 Jy
! Component: 2800  -  total flux cleaned = 0.0363046 Jy
! Component: 2850  -  total flux cleaned = 0.0361563 Jy
! Component: 2900  -  total flux cleaned = 0.0361194 Jy
! Component: 2950  -  total flux cleaned = 0.0360826 Jy
! Component: 3000  -  total flux cleaned = 0.036046 Jy
! Component: 3050  -  total flux cleaned = 0.0360458 Jy
! Component: 3100  -  total flux cleaned = 0.035936 Jy
! Component: 3150  -  total flux cleaned = 0.035936 Jy
! Component: 3200  -  total flux cleaned = 0.0358998 Jy
! Component: 3250  -  total flux cleaned = 0.0358634 Jy
! Component: 3300  -  total flux cleaned = 0.035827 Jy
! Component: 3350  -  total flux cleaned = 0.0357181 Jy
! Component: 3400  -  total flux cleaned = 0.035718 Jy
! Component: 3450  -  total flux cleaned = 0.0356819 Jy
! Component: 3500  -  total flux cleaned = 0.0356097 Jy
! Component: 3550  -  total flux cleaned = 0.0355377 Jy
! Component: 3600  -  total flux cleaned = 0.0355018 Jy
! Component: 3650  -  total flux cleaned = 0.0354656 Jy
! Component: 3700  -  total flux cleaned = 0.0353577 Jy
! Component: 3750  -  total flux cleaned = 0.0353216 Jy
! Component: 3800  -  total flux cleaned = 0.0352852 Jy
! Component: 3850  -  total flux cleaned = 0.0353214 Jy
! Component: 3900  -  total flux cleaned = 0.0352116 Jy
! Component: 3950  -  total flux cleaned = 0.035248 Jy
! Component: 4000  -  total flux cleaned = 0.0351745 Jy
! Component: 4050  -  total flux cleaned = 0.0352114 Jy
! Total flux subtracted in 4096 components = 0.0352111 Jy
! Clean residual min=-0.002014 max=0.002189 Jy/beam
! Clean residual mean=-0.000004 rms=0.000768 Jy/beam
! Combined flux in latest and established models = 0.175313 Jy
keep
! Adding 505 model components to the UV plane model.
! The established model now contains 590 components and 0.175313 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J1422+7704_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.938 x 11.07 at -8.576 degrees (North through East)
! Clean map  min=-0.0039538  max=0.062431 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1422+7704_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0624314 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000762252 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -3.66283 3.66283 7.32566 14.6513 29.3026 58.6053
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0022 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.062 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J1422+7704_S_uvs.log closed on Sat Oct  5 18:59:26 2013