! Started logfile: /g0/scr/pima/npcsb_uvs/J1358+8340_X_uvs.log on Sat Oct 5 18:53:25 2013 obs /g0/scr/pima/npcsb_uvs/J1358+8340_X_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1358+8340_X_uva.fits ! AN table 1: 46 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.738354 visibilities/baseline/integration-bin. ! Found source: J1358+8340 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 3804 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1358+8340_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.005008Jy sigma=0.861040 ! Fit after self-cal, rms=0.942146Jy sigma=0.763403 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.589 mas, bmaj=3.445 mas, bpa=-26.27 degrees ! Estimated noise=38.2156 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0664985 Jy ! Component: 100 - total flux cleaned = 0.0833186 Jy ! Total flux subtracted in 100 components = 0.0833186 Jy ! Clean residual min=-0.013026 max=0.010756 Jy/beam ! Clean residual mean=0.000004 rms=0.003554 Jy/beam ! Combined flux in latest and established models = 0.0833186 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0833186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080004Jy sigma=0.070714 ! Fit after self-cal, rms=0.078933Jy sigma=0.069808 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.044 mas, bmaj=3.689 mas, bpa=-24.08 degrees ! Estimated noise=15.1128 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00821832 Jy ! Component: 100 - total flux cleaned = 0.0126582 Jy ! Component: 150 - total flux cleaned = 0.0154145 Jy ! Component: 200 - total flux cleaned = 0.0169645 Jy ! Total flux subtracted in 200 components = 0.0169645 Jy ! Clean residual min=-0.003950 max=0.004244 Jy/beam ! Clean residual mean=0.000007 rms=0.001092 Jy/beam ! Combined flux in latest and established models = 0.100283 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 43 components and 0.100283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080186Jy sigma=0.067355 ! Fit after self-cal, rms=0.080122Jy sigma=0.067303 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 0.84 HN 0.89 KP 1.02 ! LA 0.91 NL 0.95 OV 0.98 PT 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.92 HN 0.82 KP 0.90 ! LA 0.94 NL 0.91 OV 0.87 PT 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.95 HN 0.86 KP 0.75 ! LA 0.85 NL 0.88 OV 0.88 PT 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.91 HN 0.75 KP 0.81 ! LA 0.88 NL 0.89 OV 0.81 PT 0.91 ! ! ! Fit before self-cal, rms=0.080122Jy sigma=0.067303 ! Fit after self-cal, rms=0.070224Jy sigma=0.064061 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.007 mas, bmaj=3.646 mas, bpa=-24.37 degrees ! Estimated noise=12.0618 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0129896 Jy ! Component: 100 - total flux cleaned = -0.0154277 Jy ! Component: 150 - total flux cleaned = -0.0155314 Jy ! Component: 200 - total flux cleaned = -0.0154284 Jy ! Total flux subtracted in 200 components = -0.0154284 Jy ! Clean residual min=-0.002157 max=0.002593 Jy/beam ! Clean residual mean=-0.000002 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.0848548 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 50 components and 0.0848548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063649Jy sigma=0.066226 ! Fit after self-cal, rms=0.063665Jy sigma=0.066174 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063665Jy sigma=0.066174 ! Fit after self-cal, rms=0.057120Jy sigma=0.063923 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.99 mas, bmaj=3.631 mas, bpa=-24.52 degrees ! Estimated noise=9.83498 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0103215 Jy ! Component: 100 - total flux cleaned = -0.0126651 Jy ! Component: 150 - total flux cleaned = -0.0133587 Jy ! Component: 200 - total flux cleaned = -0.0134703 Jy ! Total flux subtracted in 200 components = -0.0134703 Jy ! Clean residual min=-0.001663 max=0.002021 Jy/beam ! Clean residual mean=-0.000001 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.0713845 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 67 components and 0.0713845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051925Jy sigma=0.066142 ! Fit after self-cal, rms=0.051925Jy sigma=0.066128 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.11975e-05 Jy ! Component: 100 - total flux cleaned = -0.00011263 Jy ! Component: 150 - total flux cleaned = -0.000114417 Jy ! Component: 200 - total flux cleaned = -0.000124714 Jy ! Total flux subtracted in 200 components = -0.000124714 Jy ! Clean residual min=-0.001647 max=0.002050 Jy/beam ! Clean residual mean=-0.000001 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.0712598 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 76 components and 0.0712598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051869Jy sigma=0.066170 ! Fit after self-cal, rms=0.051870Jy sigma=0.066166 ! Inverting map ! Added new window around map position (-47.4, 22.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110818 Jy ! Component: 100 - total flux cleaned = 0.00160651 Jy ! Component: 150 - total flux cleaned = 0.00161113 Jy ! Component: 200 - total flux cleaned = 0.00158556 Jy ! Total flux subtracted in 200 components = 0.00158556 Jy ! Clean residual min=-0.001500 max=0.001472 Jy/beam ! Clean residual mean=0.000002 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.0728453 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 93 components and 0.0728453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051845Jy sigma=0.065993 ! Fit after self-cal, rms=0.051804Jy sigma=0.065962 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051804Jy sigma=0.065962 ! Fit after self-cal, rms=0.046518Jy sigma=0.063738 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.968 mas, bmaj=3.637 mas, bpa=-24.72 degrees ! Estimated noise=8.03609 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00819945 Jy ! Component: 100 - total flux cleaned = -0.0102729 Jy ! Component: 150 - total flux cleaned = -0.0108136 Jy ! Component: 200 - total flux cleaned = -0.0110795 Jy ! Total flux subtracted in 200 components = -0.0110795 Jy ! Clean residual min=-0.001252 max=0.001314 Jy/beam ! Clean residual mean=0.000002 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.0617658 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 113 components and 0.0617658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.042479Jy sigma=0.065815 ! Fit after self-cal, rms=0.042471Jy sigma=0.065801 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.85879e-05 Jy ! Component: 100 - total flux cleaned = 6.27506e-06 Jy ! Component: 150 - total flux cleaned = -0.000130405 Jy ! Component: 200 - total flux cleaned = -0.000267024 Jy ! Total flux subtracted in 200 components = -0.000267024 Jy ! Clean residual min=-0.001181 max=0.001247 Jy/beam ! Clean residual mean=0.000002 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.0614987 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 127 components and 0.0614987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.042415Jy sigma=0.065832 ! Fit after self-cal, rms=0.042408Jy sigma=0.065821 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.042408Jy sigma=0.065821 ! Fit after self-cal, rms=0.038160Jy sigma=0.063673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.671 mas, bmaj=3.76 mas, bpa=-16.5 degrees ! Estimated noise=6.93695 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00683658 Jy ! Component: 100 - total flux cleaned = -0.00873109 Jy ! Component: 150 - total flux cleaned = -0.00966387 Jy ! Component: 200 - total flux cleaned = -0.0101423 Jy ! Total flux subtracted in 200 components = -0.0101423 Jy ! Clean residual min=-0.000951 max=0.000960 Jy/beam ! Clean residual mean=0.000002 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.0513564 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 134 components and 0.0513564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.034905Jy sigma=0.065748 ! Fit after self-cal, rms=0.034894Jy sigma=0.065737 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.6038e-05 Jy ! Component: 100 - total flux cleaned = -0.00015018 Jy ! Component: 150 - total flux cleaned = -0.000219322 Jy ! Component: 200 - total flux cleaned = -0.000280214 Jy ! Total flux subtracted in 200 components = -0.000280214 Jy ! Clean residual min=-0.001020 max=0.000924 Jy/beam ! Clean residual mean=0.000001 rms=0.000264 Jy/beam ! Combined flux in latest and established models = 0.0510762 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 155 components and 0.0510762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.034859Jy sigma=0.065786 ! Fit after self-cal, rms=0.034858Jy sigma=0.065783 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.953 mas, bmaj=3.645 mas, bpa=-24.85 degrees ! Estimated noise=6.59426 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.953 x 3.645 at -24.85 degrees (North through East) ! Clean map min=-0.0014627 max=0.037627 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.526 mas, bmaj=3.455 mas, bpa=-26.64 degrees ! Estimated noise=15.9462 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0277255 Jy ! Component: 100 - total flux cleaned = 0.0362074 Jy ! Component: 150 - total flux cleaned = 0.0418944 Jy ! Component: 200 - total flux cleaned = 0.0459376 Jy ! Total flux subtracted in 200 components = 0.0459376 Jy ! Clean residual min=-0.003991 max=0.004036 Jy/beam ! Clean residual mean=0.000000 rms=0.001191 Jy/beam ! Combined flux in latest and established models = 0.0459376 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0459376 Jy ! Inverting map and beam ! Estimated beam: bmin=1.953 mas, bmaj=3.645 mas, bpa=-24.85 degrees ! Estimated noise=6.59426 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194827 Jy ! Component: 100 - total flux cleaned = 0.00288235 Jy ! Component: 150 - total flux cleaned = 0.00342006 Jy ! Component: 200 - total flux cleaned = 0.00379614 Jy ! Total flux subtracted in 200 components = 0.00379614 Jy ! Clean residual min=-0.001262 max=0.001168 Jy/beam ! Clean residual mean=-0.000001 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.0497337 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 47 components and 0.0497337 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.671 mas, bmaj=3.76 mas, bpa=-16.5 degrees ! Estimated noise=6.93695 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000675926 Jy ! Component: 100 - total flux cleaned = 0.000869023 Jy ! Component: 150 - total flux cleaned = 0.00092808 Jy ! Component: 200 - total flux cleaned = 0.000980323 Jy ! Total flux subtracted in 200 components = 0.000980323 Jy ! Clean residual min=-0.001122 max=0.001008 Jy/beam ! Clean residual mean=0.000001 rms=0.000292 Jy/beam ! Combined flux in latest and established models = 0.050714 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.96127e-05 Jy ! Component: 100 - total flux cleaned = 5.68836e-05 Jy ! Component: 150 - total flux cleaned = 6.87115e-05 Jy ! Component: 200 - total flux cleaned = 7.99824e-05 Jy ! Total flux subtracted in 200 components = 7.99824e-05 Jy ! Clean residual min=-0.001097 max=0.000954 Jy/beam ! Clean residual mean=0.000001 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 0.050794 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 87 components and 0.050794 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.953 mas, bmaj=3.645 mas, bpa=-24.85 degrees ! Estimated noise=6.59426 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000106689 Jy ! Component: 100 - total flux cleaned = -9.30373e-05 Jy ! Component: 150 - total flux cleaned = -4.17848e-05 Jy ! Component: 200 - total flux cleaned = 1.7771e-05 Jy ! Total flux subtracted in 200 components = 1.7771e-05 Jy ! Clean residual min=-0.001010 max=0.000956 Jy/beam ! Clean residual mean=0.000001 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 0.0508118 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 103 components and 0.0508118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.034815Jy sigma=0.065920 ! Fit after self-cal, rms=0.034804Jy sigma=0.065903 wmodel /g0/scr/pima/npcsb_uvs/J1358+8340_X_map.mod ! Writing 103 model components to file: /g0/scr/pima/npcsb_uvs/J1358+8340_X_map.mod wobs /g0/scr/pima/npcsb_uvs/J1358+8340_X_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1358+8340_X_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J1358+8340_X_map.win ! wwins: Wrote 2 windows to /g0/scr/pima/npcsb_uvs/J1358+8340_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000280499 Jy ! Component: 100 - total flux cleaned = -0.00042675 Jy ! Component: 150 - total flux cleaned = -0.000561857 Jy ! Component: 200 - total flux cleaned = -0.000633141 Jy ! Component: 250 - total flux cleaned = -0.000687596 Jy ! Component: 300 - total flux cleaned = -0.000766009 Jy ! Component: 350 - total flux cleaned = -0.00075394 Jy ! Component: 400 - total flux cleaned = -0.000790203 Jy ! Component: 450 - total flux cleaned = -0.000766397 Jy ! Component: 500 - total flux cleaned = -0.000708895 Jy ! Component: 550 - total flux cleaned = -0.000686488 Jy ! Component: 600 - total flux cleaned = -0.000620602 Jy ! Component: 650 - total flux cleaned = -0.000588451 Jy ! Component: 700 - total flux cleaned = -0.000535937 Jy ! Component: 750 - total flux cleaned = -0.000504916 Jy ! Component: 800 - total flux cleaned = -0.000474611 Jy ! Component: 850 - total flux cleaned = -0.000455018 Jy ! Component: 900 - total flux cleaned = -0.000455296 Jy ! Component: 950 - total flux cleaned = -0.000455281 Jy ! Component: 1000 - total flux cleaned = -0.000445829 Jy ! Component: 1050 - total flux cleaned = -0.000445681 Jy ! Component: 1100 - total flux cleaned = -0.000454625 Jy ! Component: 1150 - total flux cleaned = -0.000436753 Jy ! Component: 1200 - total flux cleaned = -0.000428071 Jy ! Component: 1250 - total flux cleaned = -0.000428268 Jy ! Component: 1300 - total flux cleaned = -0.000436918 Jy ! Component: 1350 - total flux cleaned = -0.000445385 Jy ! Component: 1400 - total flux cleaned = -0.000453771 Jy ! Component: 1450 - total flux cleaned = -0.000461945 Jy ! Component: 1500 - total flux cleaned = -0.000502595 Jy ! Component: 1550 - total flux cleaned = -0.000502452 Jy ! Component: 1600 - total flux cleaned = -0.000526298 Jy ! Component: 1650 - total flux cleaned = -0.000526362 Jy ! Component: 1700 - total flux cleaned = -0.000518578 Jy ! Component: 1750 - total flux cleaned = -0.000526214 Jy ! Component: 1800 - total flux cleaned = -0.00052625 Jy ! Component: 1850 - total flux cleaned = -0.00052617 Jy ! Component: 1900 - total flux cleaned = -0.000511164 Jy ! Component: 1950 - total flux cleaned = -0.000526029 Jy ! Component: 2000 - total flux cleaned = -0.000511279 Jy ! Component: 2050 - total flux cleaned = -0.000518659 Jy ! Component: 2100 - total flux cleaned = -0.000504103 Jy ! Component: 2150 - total flux cleaned = -0.000504157 Jy ! Component: 2200 - total flux cleaned = -0.000496999 Jy ! Component: 2250 - total flux cleaned = -0.000504035 Jy ! Component: 2300 - total flux cleaned = -0.000518122 Jy ! Component: 2350 - total flux cleaned = -0.000504079 Jy ! Component: 2400 - total flux cleaned = -0.000511143 Jy ! Component: 2450 - total flux cleaned = -0.000511138 Jy ! Component: 2500 - total flux cleaned = -0.000517993 Jy ! Component: 2550 - total flux cleaned = -0.000497468 Jy ! Component: 2600 - total flux cleaned = -0.00048391 Jy ! Component: 2650 - total flux cleaned = -0.000511003 Jy ! Component: 2700 - total flux cleaned = -0.000517763 Jy ! Component: 2750 - total flux cleaned = -0.000524443 Jy ! Component: 2800 - total flux cleaned = -0.000537819 Jy ! Component: 2850 - total flux cleaned = -0.000531148 Jy ! Component: 2900 - total flux cleaned = -0.000531185 Jy ! Component: 2950 - total flux cleaned = -0.000544347 Jy ! Component: 3000 - total flux cleaned = -0.000544324 Jy ! Component: 3050 - total flux cleaned = -0.00054435 Jy ! Component: 3100 - total flux cleaned = -0.000557429 Jy ! Component: 3150 - total flux cleaned = -0.000570433 Jy ! Component: 3200 - total flux cleaned = -0.000576913 Jy ! Component: 3250 - total flux cleaned = -0.000570423 Jy ! Component: 3300 - total flux cleaned = -0.000589825 Jy ! Component: 3350 - total flux cleaned = -0.000596273 Jy ! Component: 3400 - total flux cleaned = -0.000602703 Jy ! Component: 3450 - total flux cleaned = -0.000609105 Jy ! Component: 3500 - total flux cleaned = -0.000621847 Jy ! Component: 3550 - total flux cleaned = -0.000634634 Jy ! Component: 3600 - total flux cleaned = -0.000634645 Jy ! Component: 3650 - total flux cleaned = -0.00065371 Jy ! Component: 3700 - total flux cleaned = -0.000653697 Jy ! Component: 3750 - total flux cleaned = -0.000672704 Jy ! Component: 3800 - total flux cleaned = -0.00068534 Jy ! Component: 3850 - total flux cleaned = -0.000697948 Jy ! Component: 3900 - total flux cleaned = -0.000704233 Jy ! Component: 3950 - total flux cleaned = -0.000691649 Jy ! Component: 4000 - total flux cleaned = -0.000697944 Jy ! Component: 4050 - total flux cleaned = -0.000691667 Jy ! Total flux subtracted in 4096 components = -0.000704196 Jy ! Clean residual min=-0.000359 max=0.000491 Jy/beam ! Clean residual mean=-0.000001 rms=0.000112 Jy/beam ! Combined flux in latest and established models = 0.0501076 Jy keep ! Adding 240 model components to the UV plane model. ! The established model now contains 343 components and 0.0501076 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J1358+8340_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.953 x 3.645 at -24.85 degrees (North through East) ! Clean map min=-0.0012979 max=0.036851 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1358+8340_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0368509 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000114323 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.930692 0.930692 1.86138 3.72277 7.44553 14.8911 29.7821 59.5643 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.036 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J1358+8340_X_uvs.log closed on Sat Oct 5 18:53:29 2013