! Started logfile: /g0/scr/pima/npcsb_uvs/J1358+8340_S_uvs.log on Sat Oct  5 18:59:17 2013
obs /g0/scr/pima/npcsb_uvs/J1358+8340_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1358+8340_S_uva.fits
! AN table 1: 46 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.986957 visibilities/baseline/integration-bin.
! Found source: J1358+8340
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 8172 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1358+8340_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.022364Jy  sigma=1.394252
! Fit after  self-cal, rms=0.856730Jy  sigma=1.078108
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.458 mas, bmaj=10.21 mas, bpa=2.823 degrees
! Estimated noise=13.0223 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.12709 Jy
! Component: 100  -  total flux cleaned = 0.166669 Jy
! Total flux subtracted in 100 components = 0.166669 Jy
! Clean residual min=-0.009757 max=0.018471 Jy/beam
! Clean residual mean=-0.000008 rms=0.002997 Jy/beam
! Combined flux in latest and established models = 0.166669 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.166669 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103377Jy  sigma=0.147950
! Fit after  self-cal, rms=0.103261Jy  sigma=0.147805
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0206344 Jy
! Component: 100  -  total flux cleaned = 0.0311433 Jy
! Total flux subtracted in 100 components = 0.0311433 Jy
! Clean residual min=-0.008198 max=0.013685 Jy/beam
! Clean residual mean=-0.000000 rms=0.002044 Jy/beam
! Combined flux in latest and established models = 0.197812 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 21 components and 0.197812 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101208Jy  sigma=0.134323
! Fit after  self-cal, rms=0.101140Jy  sigma=0.134209
! Inverting map 
! Added new window around map position (3.5, -0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0125552 Jy
! Component: 100  -  total flux cleaned = 0.0194458 Jy
! Total flux subtracted in 100 components = 0.0194458 Jy
! Clean residual min=-0.007221 max=0.006818 Jy/beam
! Clean residual mean=0.000003 rms=0.001694 Jy/beam
! Combined flux in latest and established models = 0.217258 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 44 components and 0.217258 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100350Jy  sigma=0.130524
! Fit after  self-cal, rms=0.100134Jy  sigma=0.130304
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.416 mas, bmaj=10.87 mas, bpa=1.905 degrees
! Estimated noise=6.39349 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00587157 Jy
! Component: 100  -  total flux cleaned = 0.00890464 Jy
! Component: 150  -  total flux cleaned = 0.0108009 Jy
! Component: 200  -  total flux cleaned = 0.0115843 Jy
! Total flux subtracted in 200 components = 0.0115843 Jy
! Clean residual min=-0.007094 max=0.005117 Jy/beam
! Clean residual mean=0.000006 rms=0.001497 Jy/beam
! Combined flux in latest and established models = 0.228843 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 59 components and 0.228843 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100468Jy  sigma=0.128805
! Fit after  self-cal, rms=0.100417Jy  sigma=0.128769
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.95     HN        0.88     KP        0.98     
!   LA        1.04     MK        0.79     NL        0.94     OV        0.96     
!   PT        1.07     SC        0.79     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        0.89     KP        0.96     
!   LA        1.00     MK        0.86     NL        0.96     OV        0.97     
!   PT        1.03     SC        0.89     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.05     HN        0.95     KP        0.98     
!   LA        0.85     MK        0.96     NL        1.08     OV        0.99     
!   PT        1.10     SC        0.88     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.03     HN        0.88     KP        0.91     
!   LA        0.66     MK        0.95     NL        1.00     OV        0.88     
!   PT        1.00     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.100417Jy  sigma=0.128769
! Fit after  self-cal, rms=0.091370Jy  sigma=0.119412
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.311 mas, bmaj=10.87 mas, bpa=1.969 degrees
! Estimated noise=5.7695 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0127441 Jy
! Component: 100  -  total flux cleaned = -0.0144365 Jy
! Component: 150  -  total flux cleaned = -0.0148424 Jy
! Component: 200  -  total flux cleaned = -0.0150302 Jy
! Total flux subtracted in 200 components = -0.0150302 Jy
! Clean residual min=-0.002775 max=0.002618 Jy/beam
! Clean residual mean=-0.000002 rms=0.000694 Jy/beam
! Combined flux in latest and established models = 0.213812 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 73 components and 0.213812 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086088Jy  sigma=0.121616
! Fit after  self-cal, rms=0.086140Jy  sigma=0.121476
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086140Jy  sigma=0.121476
! Fit after  self-cal, rms=0.082572Jy  sigma=0.119306
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.255 mas, bmaj=10.86 mas, bpa=2.165 degrees
! Estimated noise=5.26384 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.011256 Jy
! Component: 100  -  total flux cleaned = -0.0138223 Jy
! Component: 150  -  total flux cleaned = -0.0142223 Jy
! Component: 200  -  total flux cleaned = -0.0143159 Jy
! Total flux subtracted in 200 components = -0.0143159 Jy
! Clean residual min=-0.002672 max=0.002500 Jy/beam
! Clean residual mean=-0.000002 rms=0.000651 Jy/beam
! Combined flux in latest and established models = 0.199497 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 81 components and 0.199497 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078051Jy  sigma=0.121543
! Fit after  self-cal, rms=0.078031Jy  sigma=0.121520
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000136007 Jy
! Component: 100  -  total flux cleaned = 0.000162751 Jy
! Component: 150  -  total flux cleaned = 0.000184267 Jy
! Component: 200  -  total flux cleaned = 0.000201677 Jy
! Total flux subtracted in 200 components = 0.000201677 Jy
! Clean residual min=-0.002601 max=0.002397 Jy/beam
! Clean residual mean=-0.000002 rms=0.000638 Jy/beam
! Combined flux in latest and established models = 0.199698 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 90 components and 0.199698 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077908Jy  sigma=0.121595
! Fit after  self-cal, rms=0.077904Jy  sigma=0.121591
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077904Jy  sigma=0.121591
! Fit after  self-cal, rms=0.074698Jy  sigma=0.119439
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.198 mas, bmaj=10.85 mas, bpa=2.386 degrees
! Estimated noise=4.79808 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00991363 Jy
! Component: 100  -  total flux cleaned = -0.0123559 Jy
! Component: 150  -  total flux cleaned = -0.0132372 Jy
! Component: 200  -  total flux cleaned = -0.0135242 Jy
! Total flux subtracted in 200 components = -0.0135242 Jy
! Clean residual min=-0.002606 max=0.002367 Jy/beam
! Clean residual mean=-0.000002 rms=0.000624 Jy/beam
! Combined flux in latest and established models = 0.186174 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 99 components and 0.186174 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070833Jy  sigma=0.121640
! Fit after  self-cal, rms=0.070825Jy  sigma=0.121631
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000195676 Jy
! Component: 100  -  total flux cleaned = -0.000161881 Jy
! Component: 150  -  total flux cleaned = -0.000161953 Jy
! Component: 200  -  total flux cleaned = -0.000149685 Jy
! Total flux subtracted in 200 components = -0.000149685 Jy
! Clean residual min=-0.002566 max=0.002294 Jy/beam
! Clean residual mean=-0.000002 rms=0.000618 Jy/beam
! Combined flux in latest and established models = 0.186024 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 116 components and 0.186024 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070761Jy  sigma=0.121699
! Fit after  self-cal, rms=0.070762Jy  sigma=0.121698
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070762Jy  sigma=0.121698
! Fit after  self-cal, rms=0.068068Jy  sigma=0.119609
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.458 mas, bmaj=12.51 mas, bpa=0.07488 degrees
! Estimated noise=5.0785 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00967414 Jy
! Component: 100  -  total flux cleaned = -0.0118591 Jy
! Component: 150  -  total flux cleaned = -0.0126182 Jy
! Component: 200  -  total flux cleaned = -0.0129611 Jy
! Total flux subtracted in 200 components = -0.0129611 Jy
! Clean residual min=-0.003114 max=0.003026 Jy/beam
! Clean residual mean=-0.000003 rms=0.000814 Jy/beam
! Combined flux in latest and established models = 0.173063 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 135 components and 0.173063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064762Jy  sigma=0.121928
! Fit after  self-cal, rms=0.064705Jy  sigma=0.121780
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00017791 Jy
! Component: 100  -  total flux cleaned = -0.000146561 Jy
! Component: 150  -  total flux cleaned = -0.000134909 Jy
! Component: 200  -  total flux cleaned = -0.000115032 Jy
! Total flux subtracted in 200 components = -0.000115032 Jy
! Clean residual min=-0.003120 max=0.003024 Jy/beam
! Clean residual mean=-0.000003 rms=0.000814 Jy/beam
! Combined flux in latest and established models = 0.172948 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 152 components and 0.172948 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064717Jy  sigma=0.121759
! Fit after  self-cal, rms=0.064717Jy  sigma=0.121752
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.153 mas, bmaj=10.85 mas, bpa=2.586 degrees
! Estimated noise=4.38531 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.153 x 10.85 at 2.586 degrees (North through East)
! Clean map  min=-0.0023778  max=0.11866 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.29 mas, bmaj=10.35 mas, bpa=3.38 degrees
! Estimated noise=8.33044 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0826848 Jy
! Component: 100  -  total flux cleaned = 0.114163 Jy
! Component: 150  -  total flux cleaned = 0.132669 Jy
! Component: 200  -  total flux cleaned = 0.144372 Jy
! Total flux subtracted in 200 components = 0.144372 Jy
! Clean residual min=-0.003905 max=0.006584 Jy/beam
! Clean residual mean=-0.000006 rms=0.001256 Jy/beam
! Combined flux in latest and established models = 0.144372 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.144372 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.153 mas, bmaj=10.85 mas, bpa=2.586 degrees
! Estimated noise=4.38531 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0122231 Jy
! Component: 100  -  total flux cleaned = 0.0182725 Jy
! Component: 150  -  total flux cleaned = 0.0217716 Jy
! Component: 200  -  total flux cleaned = 0.0239906 Jy
! Total flux subtracted in 200 components = 0.0239906 Jy
! Clean residual min=-0.002541 max=0.002489 Jy/beam
! Clean residual mean=-0.000003 rms=0.000638 Jy/beam
! Combined flux in latest and established models = 0.168362 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 77 components and 0.168362 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.458 mas, bmaj=12.51 mas, bpa=0.07488 degrees
! Estimated noise=5.0785 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00234038 Jy
! Component: 100  -  total flux cleaned = 0.00359674 Jy
! Component: 150  -  total flux cleaned = 0.00430801 Jy
! Component: 200  -  total flux cleaned = 0.00472159 Jy
! Total flux subtracted in 200 components = 0.00472159 Jy
! Clean residual min=-0.003023 max=0.003144 Jy/beam
! Clean residual mean=-0.000003 rms=0.000807 Jy/beam
! Combined flux in latest and established models = 0.173084 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000122606 Jy
! Component: 100  -  total flux cleaned = 0.000141477 Jy
! Component: 150  -  total flux cleaned = 0.000158067 Jy
! Component: 200  -  total flux cleaned = 0.000166203 Jy
! Total flux subtracted in 200 components = 0.000166203 Jy
! Clean residual min=-0.003022 max=0.003133 Jy/beam
! Clean residual mean=-0.000003 rms=0.000806 Jy/beam
! Combined flux in latest and established models = 0.17325 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 115 components and 0.17325 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.153 mas, bmaj=10.85 mas, bpa=2.586 degrees
! Estimated noise=4.38531 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000168763 Jy
! Component: 100  -  total flux cleaned = 9.38532e-05 Jy
! Component: 150  -  total flux cleaned = 7.90331e-05 Jy
! Component: 200  -  total flux cleaned = 7.98058e-05 Jy
! Total flux subtracted in 200 components = 7.98058e-05 Jy
! Clean residual min=-0.002359 max=0.002214 Jy/beam
! Clean residual mean=-0.000002 rms=0.000590 Jy/beam
! Combined flux in latest and established models = 0.17333 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 127 components and 0.17333 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064616Jy  sigma=0.121840
! Fit after  self-cal, rms=0.064617Jy  sigma=0.121831
wmodel /g0/scr/pima/npcsb_uvs/J1358+8340_S_map.mod
! Writing 127 model components to file: /g0/scr/pima/npcsb_uvs/J1358+8340_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J1358+8340_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1358+8340_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J1358+8340_S_map.win
! wwins: Wrote 2 windows to /g0/scr/pima/npcsb_uvs/J1358+8340_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000141798 Jy
! Component: 100  -  total flux cleaned = 0.000117171 Jy
! Component: 150  -  total flux cleaned = 0.000256819 Jy
! Component: 200  -  total flux cleaned = 0.000455093 Jy
! Component: 250  -  total flux cleaned = 0.000612842 Jy
! Component: 300  -  total flux cleaned = 0.000764068 Jy
! Component: 350  -  total flux cleaned = 0.000967353 Jy
! Component: 400  -  total flux cleaned = 0.0011073 Jy
! Component: 450  -  total flux cleaned = 0.00129551 Jy
! Component: 500  -  total flux cleaned = 0.00137391 Jy
! Component: 550  -  total flux cleaned = 0.00139945 Jy
! Component: 600  -  total flux cleaned = 0.00142415 Jy
! Component: 650  -  total flux cleaned = 0.00147152 Jy
! Component: 700  -  total flux cleaned = 0.00144712 Jy
! Component: 750  -  total flux cleaned = 0.00151608 Jy
! Component: 800  -  total flux cleaned = 0.00156151 Jy
! Component: 850  -  total flux cleaned = 0.00167232 Jy
! Component: 900  -  total flux cleaned = 0.0017807 Jy
! Component: 950  -  total flux cleaned = 0.00186596 Jy
! Component: 1000  -  total flux cleaned = 0.00194996 Jy
! Component: 1050  -  total flux cleaned = 0.00201195 Jy
! Component: 1100  -  total flux cleaned = 0.00207318 Jy
! Component: 1150  -  total flux cleaned = 0.00221344 Jy
! Component: 1200  -  total flux cleaned = 0.00235141 Jy
! Component: 1250  -  total flux cleaned = 0.00250646 Jy
! Component: 1300  -  total flux cleaned = 0.00256365 Jy
! Component: 1350  -  total flux cleaned = 0.00267692 Jy
! Component: 1400  -  total flux cleaned = 0.0027514 Jy
! Component: 1450  -  total flux cleaned = 0.00284364 Jy
! Component: 1500  -  total flux cleaned = 0.00293448 Jy
! Component: 1550  -  total flux cleaned = 0.0029705 Jy
! Component: 1600  -  total flux cleaned = 0.00293492 Jy
! Component: 1650  -  total flux cleaned = 0.003023 Jy
! Component: 1700  -  total flux cleaned = 0.00302282 Jy
! Component: 1750  -  total flux cleaned = 0.00307468 Jy
! Component: 1800  -  total flux cleaned = 0.00305727 Jy
! Component: 1850  -  total flux cleaned = 0.00310782 Jy
! Component: 1900  -  total flux cleaned = 0.00307403 Jy
! Component: 1950  -  total flux cleaned = 0.00305733 Jy
! Component: 2000  -  total flux cleaned = 0.00307401 Jy
! Component: 2050  -  total flux cleaned = 0.00317205 Jy
! Component: 2100  -  total flux cleaned = 0.00325278 Jy
! Component: 2150  -  total flux cleaned = 0.00322054 Jy
! Component: 2200  -  total flux cleaned = 0.00331613 Jy
! Component: 2250  -  total flux cleaned = 0.00336321 Jy
! Component: 2300  -  total flux cleaned = 0.00334775 Jy
! Component: 2350  -  total flux cleaned = 0.00345629 Jy
! Component: 2400  -  total flux cleaned = 0.00344072 Jy
! Component: 2450  -  total flux cleaned = 0.00344083 Jy
! Component: 2500  -  total flux cleaned = 0.00350151 Jy
! Component: 2550  -  total flux cleaned = 0.00351642 Jy
! Component: 2600  -  total flux cleaned = 0.0035015 Jy
! Component: 2650  -  total flux cleaned = 0.00350152 Jy
! Component: 2700  -  total flux cleaned = 0.00347223 Jy
! Component: 2750  -  total flux cleaned = 0.00351591 Jy
! Component: 2800  -  total flux cleaned = 0.00345812 Jy
! Component: 2850  -  total flux cleaned = 0.00347252 Jy
! Component: 2900  -  total flux cleaned = 0.00354398 Jy
! Component: 2950  -  total flux cleaned = 0.00354396 Jy
! Component: 3000  -  total flux cleaned = 0.00352981 Jy
! Component: 3050  -  total flux cleaned = 0.00357181 Jy
! Component: 3100  -  total flux cleaned = 0.00355782 Jy
! Component: 3150  -  total flux cleaned = 0.00355795 Jy
! Component: 3200  -  total flux cleaned = 0.00354413 Jy
! Component: 3250  -  total flux cleaned = 0.0035306 Jy
! Component: 3300  -  total flux cleaned = 0.00359857 Jy
! Component: 3350  -  total flux cleaned = 0.00357148 Jy
! Component: 3400  -  total flux cleaned = 0.00358489 Jy
! Component: 3450  -  total flux cleaned = 0.00363828 Jy
! Component: 3500  -  total flux cleaned = 0.0036248 Jy
! Component: 3550  -  total flux cleaned = 0.0036379 Jy
! Component: 3600  -  total flux cleaned = 0.00363787 Jy
! Component: 3650  -  total flux cleaned = 0.00372941 Jy
! Component: 3700  -  total flux cleaned = 0.00371624 Jy
! Component: 3750  -  total flux cleaned = 0.00378087 Jy
! Component: 3800  -  total flux cleaned = 0.0037165 Jy
! Component: 3850  -  total flux cleaned = 0.00380619 Jy
! Component: 3900  -  total flux cleaned = 0.00375511 Jy
! Component: 3950  -  total flux cleaned = 0.00379314 Jy
! Component: 4000  -  total flux cleaned = 0.00381827 Jy
! Component: 4050  -  total flux cleaned = 0.00378053 Jy
! Total flux subtracted in 4096 components = 0.00383058 Jy
! Clean residual min=-0.000698 max=0.000796 Jy/beam
! Clean residual mean=-0.000000 rms=0.000238 Jy/beam
! Combined flux in latest and established models = 0.177161 Jy
keep
! Adding 363 model components to the UV plane model.
! The established model now contains 490 components and 0.177161 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J1358+8340_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.153 x 10.85 at 2.586 degrees (North through East)
! Clean map  min=-0.0014485  max=0.11889 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1358+8340_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.118888 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000234387 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.591449 0.591449 1.1829 2.36579 4.73159 9.46318 18.9264 37.8527 75.7054
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0007 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.118 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J1358+8340_S_uvs.log closed on Sat Oct  5 18:59:21 2013