! Started logfile: /g0/scr/pima/npcsb_uvs/J1307+7649_X_uvs.log on Sat Oct 5 18:53:15 2013 obs /g0/scr/pima/npcsb_uvs/J1307+7649_X_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1307+7649_X_uva.fits ! AN table 1: 45 integrations on 10 of 10 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J1307+7649 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 1440 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1307+7649_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.011596Jy sigma=0.900450 ! Fit after self-cal, rms=0.935740Jy sigma=0.790472 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.7 mas, bmaj=10.41 mas, bpa=15.9 degrees ! Estimated noise=38.7883 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0681491 Jy ! Component: 100 - total flux cleaned = 0.084255 Jy ! Total flux subtracted in 100 components = 0.084255 Jy ! Clean residual min=-0.008506 max=0.008649 Jy/beam ! Clean residual mean=0.000022 rms=0.003769 Jy/beam ! Combined flux in latest and established models = 0.084255 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.084255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065993Jy sigma=0.058514 ! Fit after self-cal, rms=0.063834Jy sigma=0.057502 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.242 mas, bmaj=9.746 mas, bpa=14.12 degrees ! Estimated noise=23.6349 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00521857 Jy ! Component: 100 - total flux cleaned = 0.0066365 Jy ! Component: 150 - total flux cleaned = 0.00767062 Jy ! Component: 200 - total flux cleaned = 0.00798305 Jy ! Total flux subtracted in 200 components = 0.00798305 Jy ! Clean residual min=-0.001655 max=0.001652 Jy/beam ! Clean residual mean=-0.000002 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.0922381 Jy ! Performing phase self-cal ! Adding 78 model components to the UV plane model. ! The established model now contains 103 components and 0.0922381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065645Jy sigma=0.052433 ! Fit after self-cal, rms=0.065333Jy sigma=0.052258 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.90 KP 0.94 LA 0.96 OV 1.02 ! PT 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.93 KP 0.95 LA 0.88 OV 0.82 ! PT 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.86 KP 0.80 LA 0.91 OV 0.90 ! PT 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 0.93 KP 0.93 LA 0.86 OV 0.92 ! PT 1.01 ! ! ! Fit before self-cal, rms=0.065333Jy sigma=0.052258 ! Fit after self-cal, rms=0.061092Jy sigma=0.049236 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.226 mas, bmaj=9.659 mas, bpa=14.09 degrees ! Estimated noise=19.8302 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0109997 Jy ! Component: 100 - total flux cleaned = -0.011393 Jy ! Component: 150 - total flux cleaned = -0.0114513 Jy ! Component: 200 - total flux cleaned = -0.0106756 Jy ! Total flux subtracted in 200 components = -0.0106756 Jy ! Clean residual min=-0.000827 max=0.000837 Jy/beam ! Clean residual mean=0.000001 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 0.0815625 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 166 components and 0.0815625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055083Jy sigma=0.051135 ! Fit after self-cal, rms=0.055082Jy sigma=0.051053 ! Inverting map ! Added new window around map position (49, -33). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00061718 Jy ! Component: 100 - total flux cleaned = 0.00025194 Jy ! Component: 150 - total flux cleaned = -0.000110753 Jy ! Component: 200 - total flux cleaned = -0.000422729 Jy ! Total flux subtracted in 200 components = -0.000422729 Jy ! Clean residual min=-0.001477 max=0.001463 Jy/beam ! Clean residual mean=-0.000001 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.0811398 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 208 components and 0.0811398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055071Jy sigma=0.050954 ! Fit after self-cal, rms=0.055056Jy sigma=0.050928 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055056Jy sigma=0.050928 ! Fit after self-cal, rms=0.051900Jy sigma=0.048852 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.189 mas, bmaj=9.664 mas, bpa=14.09 degrees ! Estimated noise=16.9187 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00190656 Jy ! Component: 100 - total flux cleaned = -0.00078419 Jy ! Component: 150 - total flux cleaned = 0.00018786 Jy ! Component: 200 - total flux cleaned = 0.00105823 Jy ! Total flux subtracted in 200 components = 0.00105823 Jy ! Clean residual min=-0.008487 max=0.005279 Jy/beam ! Clean residual mean=-0.000012 rms=0.002111 Jy/beam ! Combined flux in latest and established models = 0.082198 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 247 components and 0.082198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050392Jy sigma=0.049249 ! Fit after self-cal, rms=0.050336Jy sigma=0.049075 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00185115 Jy ! Component: 100 - total flux cleaned = -0.00119965 Jy ! Component: 150 - total flux cleaned = -0.000598791 Jy ! Component: 200 - total flux cleaned = -0.000194147 Jy ! Total flux subtracted in 200 components = -0.000194147 Jy ! Clean residual min=-0.006631 max=0.004637 Jy/beam ! Clean residual mean=-0.000009 rms=0.001656 Jy/beam ! Combined flux in latest and established models = 0.0820038 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 271 components and 0.0820038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049601Jy sigma=0.049460 ! Fit after self-cal, rms=0.049585Jy sigma=0.049386 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049585Jy sigma=0.049386 ! Fit after self-cal, rms=0.048729Jy sigma=0.048843 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.201 mas, bmaj=9.641 mas, bpa=13.88 degrees ! Estimated noise=15.7986 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00139732 Jy ! Component: 100 - total flux cleaned = -0.000405555 Jy ! Component: 150 - total flux cleaned = 0.000407145 Jy ! Component: 200 - total flux cleaned = 0.0012065 Jy ! Total flux subtracted in 200 components = 0.0012065 Jy ! Clean residual min=-0.008495 max=0.005873 Jy/beam ! Clean residual mean=-0.000011 rms=0.002133 Jy/beam ! Combined flux in latest and established models = 0.0832103 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 279 components and 0.0832103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047682Jy sigma=0.049210 ! Fit after self-cal, rms=0.047662Jy sigma=0.049083 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00128612 Jy ! Component: 100 - total flux cleaned = -0.000708655 Jy ! Component: 150 - total flux cleaned = -0.000119353 Jy ! Component: 200 - total flux cleaned = 0.000612341 Jy ! Total flux subtracted in 200 components = 0.000612341 Jy ! Clean residual min=-0.007188 max=0.005231 Jy/beam ! Clean residual mean=-0.000009 rms=0.001790 Jy/beam ! Combined flux in latest and established models = 0.0838227 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 293 components and 0.0838227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047120Jy sigma=0.049354 ! Fit after self-cal, rms=0.047119Jy sigma=0.049300 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047119Jy sigma=0.049300 ! Fit after self-cal, rms=0.046608Jy sigma=0.048961 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.391 mas, bmaj=9.551 mas, bpa=14.09 degrees ! Estimated noise=14.9484 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000259731 Jy ! Component: 100 - total flux cleaned = 0.000615224 Jy ! Component: 150 - total flux cleaned = 0.00140678 Jy ! Component: 200 - total flux cleaned = 0.0023907 Jy ! Total flux subtracted in 200 components = 0.0023907 Jy ! Clean residual min=-0.008251 max=0.006024 Jy/beam ! Clean residual mean=-0.000010 rms=0.002117 Jy/beam ! Combined flux in latest and established models = 0.0862134 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 303 components and 0.0862134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.045850Jy sigma=0.049261 ! Fit after self-cal, rms=0.045849Jy sigma=0.049178 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000596096 Jy ! Component: 100 - total flux cleaned = -1.10878e-05 Jy ! Component: 150 - total flux cleaned = 0.000885919 Jy ! Component: 200 - total flux cleaned = 0.00168129 Jy ! Total flux subtracted in 200 components = 0.00168129 Jy ! Clean residual min=-0.007259 max=0.005467 Jy/beam ! Clean residual mean=-0.000009 rms=0.001839 Jy/beam ! Combined flux in latest and established models = 0.0878947 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 309 components and 0.0878946 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.045428Jy sigma=0.049372 ! Fit after self-cal, rms=0.045434Jy sigma=0.049339 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.218 mas, bmaj=9.626 mas, bpa=13.79 degrees ! Estimated noise=15.0038 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.218 x 9.626 at 13.79 degrees (North through East) ! Clean map min=-0.017209 max=0.058277 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.678 mas, bmaj=10.3 mas, bpa=15.65 degrees ! Estimated noise=24.6466 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00628817 Jy ! Component: 100 - total flux cleaned = -0.011493 Jy ! Component: 150 - total flux cleaned = -0.0172889 Jy ! Component: 200 - total flux cleaned = -0.0224119 Jy ! Total flux subtracted in 200 components = -0.0224119 Jy ! Clean residual min=-0.030649 max=0.043614 Jy/beam ! Clean residual mean=0.000068 rms=0.011001 Jy/beam ! Combined flux in latest and established models = -0.0224119 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and -0.0224119 Jy ! Inverting map and beam ! Estimated beam: bmin=4.218 mas, bmaj=9.626 mas, bpa=13.79 degrees ! Estimated noise=15.0038 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.01148 Jy ! Component: 100 - total flux cleaned = -0.0184785 Jy ! Component: 150 - total flux cleaned = -0.0248182 Jy ! Component: 200 - total flux cleaned = -0.0302565 Jy ! Total flux subtracted in 200 components = -0.0302565 Jy ! Clean residual min=-0.024343 max=0.040239 Jy/beam ! Clean residual mean=0.000050 rms=0.010024 Jy/beam ! Combined flux in latest and established models = -0.0526684 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 86 components and -0.0526684 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.391 mas, bmaj=9.551 mas, bpa=14.09 degrees ! Estimated noise=14.9484 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00622491 Jy ! Component: 100 - total flux cleaned = -0.0113863 Jy ! Component: 150 - total flux cleaned = -0.0163514 Jy ! Component: 200 - total flux cleaned = -0.0211355 Jy ! Total flux subtracted in 200 components = -0.0211355 Jy ! Clean residual min=-0.022909 max=0.037021 Jy/beam ! Clean residual mean=0.000048 rms=0.009377 Jy/beam ! Combined flux in latest and established models = -0.0738039 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00484313 Jy ! Component: 100 - total flux cleaned = -0.00928765 Jy ! Component: 150 - total flux cleaned = -0.0135813 Jy ! Component: 200 - total flux cleaned = -0.0175274 Jy ! Total flux subtracted in 200 components = -0.0175274 Jy ! Clean residual min=-0.021548 max=0.035082 Jy/beam ! Clean residual mean=0.000044 rms=0.008731 Jy/beam ! Combined flux in latest and established models = -0.0913313 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 110 components and -0.0913313 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.218 mas, bmaj=9.626 mas, bpa=13.79 degrees ! Estimated noise=15.0038 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0028732 Jy ! Component: 100 - total flux cleaned = -0.0064092 Jy ! Component: 150 - total flux cleaned = -0.0094757 Jy ! Component: 200 - total flux cleaned = -0.012623 Jy ! Total flux subtracted in 200 components = -0.012623 Jy ! Clean residual min=-0.021082 max=0.033638 Jy/beam ! Clean residual mean=0.000044 rms=0.008141 Jy/beam ! Combined flux in latest and established models = -0.103954 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 114 components and -0.103954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049827Jy sigma=0.083814 ! Fit after self-cal, rms=0.042995Jy sigma=0.072904 wmodel /g0/scr/pima/npcsb_uvs/J1307+7649_X_map.mod ! Writing 114 model components to file: /g0/scr/pima/npcsb_uvs/J1307+7649_X_map.mod wobs /g0/scr/pima/npcsb_uvs/J1307+7649_X_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1307+7649_X_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J1307+7649_X_map.win ! wwins: Wrote 1 windows to /g0/scr/pima/npcsb_uvs/J1307+7649_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00910406 Jy ! Component: 100 - total flux cleaned = 0.015114 Jy ! Component: 150 - total flux cleaned = 0.0173629 Jy ! Component: 200 - total flux cleaned = 0.0178254 Jy ! Component: 250 - total flux cleaned = 0.0186843 Jy ! Component: 300 - total flux cleaned = 0.0187793 Jy ! Component: 350 - total flux cleaned = 0.0187075 Jy ! Component: 400 - total flux cleaned = 0.0187078 Jy ! Component: 450 - total flux cleaned = 0.0183841 Jy ! Component: 500 - total flux cleaned = 0.0181906 Jy ! Component: 550 - total flux cleaned = 0.0179299 Jy ! Component: 600 - total flux cleaned = 0.0176628 Jy ! Component: 650 - total flux cleaned = 0.0173908 Jy ! Component: 700 - total flux cleaned = 0.0170399 Jy ! Component: 750 - total flux cleaned = 0.0168948 Jy ! Component: 800 - total flux cleaned = 0.0165987 Jy ! Component: 850 - total flux cleaned = 0.0163711 Jy ! Component: 900 - total flux cleaned = 0.0161366 Jy ! Component: 950 - total flux cleaned = 0.0158951 Jy ! Component: 1000 - total flux cleaned = 0.0156464 Jy ! Component: 1050 - total flux cleaned = 0.0154772 Jy ! Component: 1100 - total flux cleaned = 0.0152164 Jy ! Component: 1150 - total flux cleaned = 0.0151235 Jy ! Component: 1200 - total flux cleaned = 0.0150274 Jy ! Component: 1250 - total flux cleaned = 0.0149282 Jy ! Component: 1300 - total flux cleaned = 0.0148245 Jy ! Component: 1350 - total flux cleaned = 0.0148258 Jy ! Component: 1400 - total flux cleaned = 0.0147125 Jy ! Component: 1450 - total flux cleaned = 0.0145913 Jy ! Component: 1500 - total flux cleaned = 0.0145933 Jy ! Component: 1550 - total flux cleaned = 0.0144579 Jy ! Component: 1600 - total flux cleaned = 0.0145962 Jy ! Component: 1650 - total flux cleaned = 0.0147451 Jy ! Component: 1700 - total flux cleaned = 0.0149014 Jy ! Component: 1750 - total flux cleaned = 0.0150707 Jy ! Component: 1800 - total flux cleaned = 0.0150702 Jy ! Component: 1850 - total flux cleaned = 0.0152397 Jy ! Component: 1900 - total flux cleaned = 0.0154288 Jy ! Component: 1950 - total flux cleaned = 0.0154303 Jy ! Component: 2000 - total flux cleaned = 0.0154226 Jy ! Component: 2050 - total flux cleaned = 0.0156367 Jy ! Component: 2100 - total flux cleaned = 0.0156349 Jy ! Component: 2150 - total flux cleaned = 0.0158784 Jy ! Component: 2200 - total flux cleaned = 0.0156268 Jy ! Component: 2250 - total flux cleaned = 0.0158766 Jy ! Component: 2300 - total flux cleaned = 0.0158718 Jy ! Component: 2350 - total flux cleaned = 0.0158738 Jy ! Component: 2400 - total flux cleaned = 0.0161793 Jy ! Component: 2450 - total flux cleaned = 0.0165018 Jy ! Component: 2500 - total flux cleaned = 0.0165019 Jy ! Component: 2550 - total flux cleaned = 0.0168534 Jy ! Component: 2600 - total flux cleaned = 0.0168532 Jy ! Component: 2650 - total flux cleaned = 0.0168495 Jy ! Component: 2700 - total flux cleaned = 0.0168422 Jy ! Component: 2750 - total flux cleaned = 0.0172737 Jy ! Component: 2800 - total flux cleaned = 0.0172769 Jy ! Component: 2850 - total flux cleaned = 0.0177561 Jy ! Component: 2900 - total flux cleaned = 0.0177691 Jy ! Component: 2950 - total flux cleaned = 0.0177742 Jy ! Component: 3000 - total flux cleaned = 0.0183429 Jy ! Component: 3050 - total flux cleaned = 0.0183465 Jy ! Component: 3100 - total flux cleaned = 0.018981 Jy ! Component: 3150 - total flux cleaned = 0.0189939 Jy ! Component: 3200 - total flux cleaned = 0.0190047 Jy ! Component: 3250 - total flux cleaned = 0.0189889 Jy ! Component: 3300 - total flux cleaned = 0.0197327 Jy ! Component: 3350 - total flux cleaned = 0.0197248 Jy ! Component: 3400 - total flux cleaned = 0.0197242 Jy ! Component: 3450 - total flux cleaned = 0.0196899 Jy ! Component: 3500 - total flux cleaned = 0.0206019 Jy ! Component: 3550 - total flux cleaned = 0.0205795 Jy ! Component: 3600 - total flux cleaned = 0.0216035 Jy ! Component: 3650 - total flux cleaned = 0.0216401 Jy ! Component: 3700 - total flux cleaned = 0.0216514 Jy ! Component: 3750 - total flux cleaned = 0.0216773 Jy ! Component: 3800 - total flux cleaned = 0.0229091 Jy ! Component: 3850 - total flux cleaned = 0.0229677 Jy ! Component: 3900 - total flux cleaned = 0.0229665 Jy ! Component: 3950 - total flux cleaned = 0.022945 Jy ! Component: 4000 - total flux cleaned = 0.0244673 Jy ! Component: 4050 - total flux cleaned = 0.0245185 Jy ! Total flux subtracted in 4096 components = 0.024535 Jy ! Clean residual min=-0.097669 max=0.095067 Jy/beam ! Clean residual mean=0.000444 rms=0.029122 Jy/beam ! Combined flux in latest and established models = -0.0794193 Jy keep ! Adding 120 model components to the UV plane model. ! The established model now contains 224 components and -0.0794194 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J1307+7649_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.218 x 9.626 at 13.79 degrees (North through East) ! Clean map min=-0.22359 max=0.12578 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1307+7649_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.125785 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0321015 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -76.5628 76.5628 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0963 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.125 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J1307+7649_X_uvs.log closed on Sat Oct 5 18:53:19 2013