! Started logfile: /g0/scr/pima/npcsb_uvs/J1307+7649_S_uvs.log on Sat Oct 5 18:59:07 2013 obs /g0/scr/pima/npcsb_uvs/J1307+7649_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1307+7649_S_uva.fits ! AN table 1: 45 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.922469 visibilities/baseline/integration-bin. ! Found source: J1307+7649 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 7472 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1307+7649_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.022590Jy sigma=1.548477 ! Fit after self-cal, rms=0.873800Jy sigma=1.152623 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.231 mas, bmaj=10.46 mas, bpa=-4.579 degrees ! Estimated noise=14.5648 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.130812 Jy ! Component: 100 - total flux cleaned = 0.185326 Jy ! Total flux subtracted in 100 components = 0.185326 Jy ! Clean residual min=-0.021323 max=0.028404 Jy/beam ! Clean residual mean=0.000024 rms=0.007366 Jy/beam ! Combined flux in latest and established models = 0.185326 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.185326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113501Jy sigma=0.216330 ! Fit after self-cal, rms=0.112535Jy sigma=0.215780 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.251 mas, bmaj=11.04 mas, bpa=-4.119 degrees ! Estimated noise=6.37297 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0448916 Jy ! Component: 100 - total flux cleaned = 0.0694424 Jy ! Component: 150 - total flux cleaned = 0.0846224 Jy ! Component: 200 - total flux cleaned = 0.0941675 Jy ! Total flux subtracted in 200 components = 0.0941675 Jy ! Clean residual min=-0.022080 max=0.033225 Jy/beam ! Clean residual mean=0.000019 rms=0.007824 Jy/beam ! Combined flux in latest and established models = 0.279494 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 65 components and 0.279494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106671Jy sigma=0.173247 ! Fit after self-cal, rms=0.106398Jy sigma=0.172940 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.98 HN 0.86 KP 0.90 ! LA 0.95 MK 0.77 NL 1.16 OV 1.12 ! PT 0.99 SC 0.84 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.01 HN 0.92 KP 0.90 ! LA 0.90 MK 0.73 NL 1.16 OV 1.16 ! PT 0.98 SC 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 0.85 KP 0.93 ! LA 0.71 MK 0.87 NL 1.28 OV 1.34 ! PT 1.12 SC 0.93 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HN 0.83 KP 0.86 ! LA 0.59 MK 0.80 NL 1.16 OV 1.13 ! PT 1.00 SC 0.88 ! ! ! Fit before self-cal, rms=0.106398Jy sigma=0.172940 ! Fit after self-cal, rms=0.094068Jy sigma=0.143503 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.125 mas, bmaj=10.94 mas, bpa=-3.879 degrees ! Estimated noise=5.72672 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0108346 Jy ! Component: 100 - total flux cleaned = -0.0147231 Jy ! Component: 150 - total flux cleaned = -0.016438 Jy ! Component: 200 - total flux cleaned = -0.0166702 Jy ! Total flux subtracted in 200 components = -0.0166702 Jy ! Clean residual min=-0.014928 max=0.022238 Jy/beam ! Clean residual mean=-0.000043 rms=0.004947 Jy/beam ! Combined flux in latest and established models = 0.262823 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 85 components and 0.262823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090793Jy sigma=0.145285 ! Fit after self-cal, rms=0.091179Jy sigma=0.144826 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091179Jy sigma=0.144826 ! Fit after self-cal, rms=0.088005Jy sigma=0.142837 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.082 mas, bmaj=10.93 mas, bpa=-3.722 degrees ! Estimated noise=5.34249 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0098216 Jy ! Component: 100 - total flux cleaned = -0.0132452 Jy ! Component: 150 - total flux cleaned = -0.0149587 Jy ! Component: 200 - total flux cleaned = -0.0154439 Jy ! Total flux subtracted in 200 components = -0.0154439 Jy ! Clean residual min=-0.013705 max=0.020410 Jy/beam ! Clean residual mean=-0.000040 rms=0.004585 Jy/beam ! Combined flux in latest and established models = 0.247379 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 93 components and 0.247379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085153Jy sigma=0.144672 ! Fit after self-cal, rms=0.085157Jy sigma=0.144620 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (64, -11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0162665 Jy ! Component: 100 - total flux cleaned = 0.0221065 Jy ! Component: 150 - total flux cleaned = 0.0228954 Jy ! Component: 200 - total flux cleaned = 0.0231579 Jy ! Total flux subtracted in 200 components = 0.0231579 Jy ! Clean residual min=-0.011850 max=0.012860 Jy/beam ! Clean residual mean=-0.000018 rms=0.004000 Jy/beam ! Combined flux in latest and established models = 0.270537 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 117 components and 0.270537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082189Jy sigma=0.138321 ! Fit after self-cal, rms=0.081743Jy sigma=0.136830 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081743Jy sigma=0.136830 ! Fit after self-cal, rms=0.078126Jy sigma=0.134589 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.047 mas, bmaj=11.04 mas, bpa=-3.551 degrees ! Estimated noise=5.00062 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00477057 Jy ! Component: 100 - total flux cleaned = -0.00414487 Jy ! Component: 150 - total flux cleaned = -0.00338162 Jy ! Component: 200 - total flux cleaned = -0.0030347 Jy ! Total flux subtracted in 200 components = -0.0030347 Jy ! Clean residual min=-0.010536 max=0.011755 Jy/beam ! Clean residual mean=-0.000020 rms=0.003391 Jy/beam ! Combined flux in latest and established models = 0.267503 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 132 components and 0.267503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075203Jy sigma=0.134476 ! Fit after self-cal, rms=0.075190Jy sigma=0.134132 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00208031 Jy ! Component: 100 - total flux cleaned = 0.00316753 Jy ! Component: 150 - total flux cleaned = 0.00371537 Jy ! Component: 200 - total flux cleaned = 0.0041271 Jy ! Total flux subtracted in 200 components = 0.0041271 Jy ! Clean residual min=-0.010671 max=0.011135 Jy/beam ! Clean residual mean=-0.000012 rms=0.003307 Jy/beam ! Combined flux in latest and established models = 0.27163 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 145 components and 0.27163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074769Jy sigma=0.133884 ! Fit after self-cal, rms=0.074822Jy sigma=0.133797 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074822Jy sigma=0.133797 ! Fit after self-cal, rms=0.072350Jy sigma=0.132227 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.776 mas, bmaj=12.84 mas, bpa=1.702 degrees ! Estimated noise=4.62685 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00826184 Jy ! Component: 100 - total flux cleaned = -0.00788066 Jy ! Component: 150 - total flux cleaned = -0.00823079 Jy ! Component: 200 - total flux cleaned = -0.00853329 Jy ! Total flux subtracted in 200 components = -0.00853329 Jy ! Clean residual min=-0.014691 max=0.013411 Jy/beam ! Clean residual mean=-0.000025 rms=0.004814 Jy/beam ! Combined flux in latest and established models = 0.263097 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 160 components and 0.263097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069987Jy sigma=0.133402 ! Fit after self-cal, rms=0.070006Jy sigma=0.133309 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000759478 Jy ! Component: 100 - total flux cleaned = 0.000833755 Jy ! Component: 150 - total flux cleaned = 0.000834474 Jy ! Component: 200 - total flux cleaned = 0.000773976 Jy ! Total flux subtracted in 200 components = 0.000773976 Jy ! Clean residual min=-0.014589 max=0.013241 Jy/beam ! Clean residual mean=-0.000021 rms=0.004764 Jy/beam ! Combined flux in latest and established models = 0.26387 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 169 components and 0.263871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069910Jy sigma=0.133166 ! Fit after self-cal, rms=0.069924Jy sigma=0.133152 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.039 mas, bmaj=11.06 mas, bpa=-3.587 degrees ! Estimated noise=4.71555 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.039 x 11.06 at -3.587 degrees (North through East) ! Clean map min=-0.009573 max=0.13463 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.092 mas, bmaj=10.42 mas, bpa=-3.783 degrees ! Estimated noise=10.5061 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.09609 Jy ! Component: 100 - total flux cleaned = 0.139851 Jy ! Component: 150 - total flux cleaned = 0.16684 Jy ! Component: 200 - total flux cleaned = 0.185728 Jy ! Total flux subtracted in 200 components = 0.185728 Jy ! Clean residual min=-0.011121 max=0.013090 Jy/beam ! Clean residual mean=0.000005 rms=0.003426 Jy/beam ! Combined flux in latest and established models = 0.185728 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.185728 Jy ! Inverting map and beam ! Estimated beam: bmin=4.039 mas, bmaj=11.06 mas, bpa=-3.587 degrees ! Estimated noise=4.71555 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0200457 Jy ! Component: 100 - total flux cleaned = 0.0336804 Jy ! Component: 150 - total flux cleaned = 0.0438472 Jy ! Component: 200 - total flux cleaned = 0.0515856 Jy ! Total flux subtracted in 200 components = 0.0515856 Jy ! Clean residual min=-0.010408 max=0.012503 Jy/beam ! Clean residual mean=0.000001 rms=0.003444 Jy/beam ! Combined flux in latest and established models = 0.237313 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 89 components and 0.237313 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.776 mas, bmaj=12.84 mas, bpa=1.702 degrees ! Estimated noise=4.62685 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00919807 Jy ! Component: 100 - total flux cleaned = 0.0150362 Jy ! Component: 150 - total flux cleaned = 0.0188206 Jy ! Component: 200 - total flux cleaned = 0.0200011 Jy ! Total flux subtracted in 200 components = 0.0200011 Jy ! Clean residual min=-0.014847 max=0.013409 Jy/beam ! Clean residual mean=-0.000005 rms=0.004787 Jy/beam ! Combined flux in latest and established models = 0.257314 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000705265 Jy ! Component: 100 - total flux cleaned = 0.00125515 Jy ! Component: 150 - total flux cleaned = 0.00159748 Jy ! Component: 200 - total flux cleaned = 0.00175629 Jy ! Total flux subtracted in 200 components = 0.00175629 Jy ! Clean residual min=-0.014988 max=0.012951 Jy/beam ! Clean residual mean=-0.000007 rms=0.004764 Jy/beam ! Combined flux in latest and established models = 0.259071 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 130 components and 0.259071 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.039 mas, bmaj=11.06 mas, bpa=-3.587 degrees ! Estimated noise=4.71555 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000564497 Jy ! Component: 100 - total flux cleaned = -0.000102583 Jy ! Component: 150 - total flux cleaned = 0.000379772 Jy ! Component: 200 - total flux cleaned = 0.00074663 Jy ! Total flux subtracted in 200 components = 0.00074663 Jy ! Clean residual min=-0.010035 max=0.010535 Jy/beam ! Clean residual mean=-0.000005 rms=0.003029 Jy/beam ! Combined flux in latest and established models = 0.259817 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 147 components and 0.259817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070032Jy sigma=0.133431 ! Fit after self-cal, rms=0.070019Jy sigma=0.133336 wmodel /g0/scr/pima/npcsb_uvs/J1307+7649_S_map.mod ! Writing 147 model components to file: /g0/scr/pima/npcsb_uvs/J1307+7649_S_map.mod wobs /g0/scr/pima/npcsb_uvs/J1307+7649_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1307+7649_S_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J1307+7649_S_map.win ! wwins: Wrote 2 windows to /g0/scr/pima/npcsb_uvs/J1307+7649_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000197747 Jy ! Component: 100 - total flux cleaned = 0.000515274 Jy ! Component: 150 - total flux cleaned = 0.00079702 Jy ! Component: 200 - total flux cleaned = 0.00118929 Jy ! Component: 250 - total flux cleaned = 0.00168284 Jy ! Component: 300 - total flux cleaned = 0.00225783 Jy ! Component: 350 - total flux cleaned = 0.00225871 Jy ! Component: 400 - total flux cleaned = 0.00256274 Jy ! Component: 450 - total flux cleaned = 0.00265948 Jy ! Component: 500 - total flux cleaned = 0.00275428 Jy ! Component: 550 - total flux cleaned = 0.00292625 Jy ! Component: 600 - total flux cleaned = 0.00268275 Jy ! Component: 650 - total flux cleaned = 0.00245415 Jy ! Component: 700 - total flux cleaned = 0.00216219 Jy ! Component: 750 - total flux cleaned = 0.00195269 Jy ! Component: 800 - total flux cleaned = 0.00168886 Jy ! Component: 850 - total flux cleaned = 0.00188115 Jy ! Component: 900 - total flux cleaned = 0.00181941 Jy ! Component: 950 - total flux cleaned = 0.00199636 Jy ! Component: 1000 - total flux cleaned = 0.00210848 Jy ! Component: 1050 - total flux cleaned = 0.00199951 Jy ! Component: 1100 - total flux cleaned = 0.00199991 Jy ! Component: 1150 - total flux cleaned = 0.00189929 Jy ! Component: 1200 - total flux cleaned = 0.00185129 Jy ! Component: 1250 - total flux cleaned = 0.00185096 Jy ! Component: 1300 - total flux cleaned = 0.00185148 Jy ! Component: 1350 - total flux cleaned = 0.00185068 Jy ! Component: 1400 - total flux cleaned = 0.00176384 Jy ! Component: 1450 - total flux cleaned = 0.0017226 Jy ! Component: 1500 - total flux cleaned = 0.00172273 Jy ! Component: 1550 - total flux cleaned = 0.00164228 Jy ! Component: 1600 - total flux cleaned = 0.00168191 Jy ! Component: 1650 - total flux cleaned = 0.00171993 Jy ! Component: 1700 - total flux cleaned = 0.00186659 Jy ! Component: 1750 - total flux cleaned = 0.00193769 Jy ! Component: 1800 - total flux cleaned = 0.00211153 Jy ! Component: 1850 - total flux cleaned = 0.00217996 Jy ! Component: 1900 - total flux cleaned = 0.00221234 Jy ! Component: 1950 - total flux cleaned = 0.00214758 Jy ! Component: 2000 - total flux cleaned = 0.00221129 Jy ! Component: 2050 - total flux cleaned = 0.00227415 Jy ! Component: 2100 - total flux cleaned = 0.0023955 Jy ! Component: 2150 - total flux cleaned = 0.00242508 Jy ! Component: 2200 - total flux cleaned = 0.00251325 Jy ! Component: 2250 - total flux cleaned = 0.00262847 Jy ! Component: 2300 - total flux cleaned = 0.00279855 Jy ! Component: 2350 - total flux cleaned = 0.00288299 Jy ! Component: 2400 - total flux cleaned = 0.00304731 Jy ! Component: 2450 - total flux cleaned = 0.00326269 Jy ! Component: 2500 - total flux cleaned = 0.00339604 Jy ! Component: 2550 - total flux cleaned = 0.00360576 Jy ! Component: 2600 - total flux cleaned = 0.00381198 Jy ! Component: 2650 - total flux cleaned = 0.00393892 Jy ! Component: 2700 - total flux cleaned = 0.00406419 Jy ! Component: 2750 - total flux cleaned = 0.00416379 Jy ! Component: 2800 - total flux cleaned = 0.00443337 Jy ! Component: 2850 - total flux cleaned = 0.00455459 Jy ! Component: 2900 - total flux cleaned = 0.00467436 Jy ! Component: 2950 - total flux cleaned = 0.00481653 Jy ! Component: 3000 - total flux cleaned = 0.00505069 Jy ! Component: 3050 - total flux cleaned = 0.00514311 Jy ! Component: 3100 - total flux cleaned = 0.00532634 Jy ! Component: 3150 - total flux cleaned = 0.00548523 Jy ! Component: 3200 - total flux cleaned = 0.00568711 Jy ! Component: 3250 - total flux cleaned = 0.0057537 Jy ! Component: 3300 - total flux cleaned = 0.00590807 Jy ! Component: 3350 - total flux cleaned = 0.00608283 Jy ! Component: 3400 - total flux cleaned = 0.00619102 Jy ! Component: 3450 - total flux cleaned = 0.00629863 Jy ! Component: 3500 - total flux cleaned = 0.00638395 Jy ! Component: 3550 - total flux cleaned = 0.00653179 Jy ! Component: 3600 - total flux cleaned = 0.00663636 Jy ! Component: 3650 - total flux cleaned = 0.0066988 Jy ! Component: 3700 - total flux cleaned = 0.00682262 Jy ! Component: 3750 - total flux cleaned = 0.00690447 Jy ! Component: 3800 - total flux cleaned = 0.00690455 Jy ! Component: 3850 - total flux cleaned = 0.00694516 Jy ! Component: 3900 - total flux cleaned = 0.00700567 Jy ! Component: 3950 - total flux cleaned = 0.00704579 Jy ! Component: 4000 - total flux cleaned = 0.00704566 Jy ! Component: 4050 - total flux cleaned = 0.00704556 Jy ! Total flux subtracted in 4096 components = 0.0070653 Jy ! Clean residual min=-0.001109 max=0.001241 Jy/beam ! Clean residual mean=-0.000002 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.266883 Jy keep ! Adding 422 model components to the UV plane model. ! The established model now contains 569 components and 0.266883 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J1307+7649_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.039 x 11.06 at -3.587 degrees (North through East) ! Clean map min=-0.0044921 max=0.13338 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1307+7649_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.133382 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000353886 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.795954 0.795954 1.59191 3.18382 6.36763 12.7353 25.4705 50.9411 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.133 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J1307+7649_S_uvs.log closed on Sat Oct 5 18:59:11 2013