! Started logfile: /g0/scr/pima/npcsb_uvs/J1233+8054_S_uvs.log on Sat Oct 5 18:59:01 2013 obs /g0/scr/pima/npcsb_uvs/J1233+8054_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1233+8054_S_uva.fits ! AN table 1: 46 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1233+8054 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 8280 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1233+8054_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.178120Jy sigma=3.619559 ! Fit after self-cal, rms=0.877355Jy sigma=3.011548 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.299 mas, bmaj=10.48 mas, bpa=8.925 degrees ! Estimated noise=7.14308 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.25378 Jy ! Component: 100 - total flux cleaned = 0.31371 Jy ! Total flux subtracted in 100 components = 0.31371 Jy ! Clean residual min=-0.035251 max=0.037760 Jy/beam ! Clean residual mean=-0.000005 rms=0.013744 Jy/beam ! Combined flux in latest and established models = 0.31371 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.31371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.536308Jy sigma=2.622449 ! Fit after self-cal, rms=0.536302Jy sigma=2.622435 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.127 mas, bmaj=10.95 mas, bpa=7.076 degrees ! Estimated noise=3.45823 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0309629 Jy ! Component: 100 - total flux cleaned = 0.036392 Jy ! Component: 150 - total flux cleaned = 0.0363937 Jy ! Component: 200 - total flux cleaned = 0.0354061 Jy ! Total flux subtracted in 200 components = 0.0354061 Jy ! Clean residual min=-0.031696 max=0.043213 Jy/beam ! Clean residual mean=-0.000015 rms=0.011666 Jy/beam ! Combined flux in latest and established models = 0.349116 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 23 components and 0.349116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.536191Jy sigma=2.616500 ! Fit after self-cal, rms=0.536170Jy sigma=2.616479 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.92 HN 0.97 KP 0.96 ! LA 1.07 MK 0.95 NL 1.00 OV 1.08 ! PT 1.06 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.95 HN 1.00 KP 0.95 ! LA 1.02 MK 0.98 NL 0.97 OV 1.08 ! PT 0.98 SC 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.45 FD 1.34 HN 1.30 KP 1.32 ! LA 1.14 MK 1.44 NL 1.46 OV 0.50 ! PT 1.49 SC 0.45 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 2.73 FD 2.94 HN 2.49 KP 2.61 ! LA 2.11 MK 2.86 NL 3.00 OV 0.26 ! PT 2.76 SC 0.26 ! ! ! Fit before self-cal, rms=0.536170Jy sigma=2.616479 ! Fit after self-cal, rms=0.889192Jy sigma=2.484815 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.792 mas, bmaj=12.05 mas, bpa=6.504 degrees ! Estimated noise=3.64475 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-19, 49.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0846193 Jy ! Component: 100 - total flux cleaned = 0.132483 Jy ! Component: 150 - total flux cleaned = 0.15569 Jy ! Component: 200 - total flux cleaned = 0.168733 Jy ! Total flux subtracted in 200 components = 0.168733 Jy ! Clean residual min=-0.040366 max=0.054591 Jy/beam ! Clean residual mean=0.000017 rms=0.011290 Jy/beam ! Combined flux in latest and established models = 0.517849 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 66 components and 0.517849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.851371Jy sigma=2.494577 ! Fit after self-cal, rms=0.853024Jy sigma=2.490206 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.853024Jy sigma=2.490206 ! Fit after self-cal, rms=0.668752Jy sigma=2.471518 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.657 mas, bmaj=12.65 mas, bpa=6.494 degrees ! Estimated noise=3.5253 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0606471 Jy ! Component: 100 - total flux cleaned = 0.0974051 Jy ! Component: 150 - total flux cleaned = 0.116882 Jy ! Component: 200 - total flux cleaned = 0.131464 Jy ! Total flux subtracted in 200 components = 0.131464 Jy ! Clean residual min=-0.032775 max=0.050799 Jy/beam ! Clean residual mean=0.000009 rms=0.010652 Jy/beam ! Combined flux in latest and established models = 0.649312 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 86 components and 0.649312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.646751Jy sigma=2.483680 ! Fit after self-cal, rms=0.646140Jy sigma=2.482129 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10.5, -69). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0288279 Jy ! Component: 100 - total flux cleaned = 0.0410919 Jy ! Component: 150 - total flux cleaned = 0.0511751 Jy ! Component: 200 - total flux cleaned = 0.0579286 Jy ! Total flux subtracted in 200 components = 0.0579286 Jy ! Clean residual min=-0.032133 max=0.039845 Jy/beam ! Clean residual mean=0.000021 rms=0.009008 Jy/beam ! Combined flux in latest and established models = 0.707241 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 107 components and 0.707241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.632255Jy sigma=2.464723 ! Fit after self-cal, rms=0.632419Jy sigma=2.463026 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.632419Jy sigma=2.463026 ! Fit after self-cal, rms=0.727617Jy sigma=2.425239 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.517 mas, bmaj=13.67 mas, bpa=6.335 degrees ! Estimated noise=3.18696 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.047458 Jy ! Component: 100 - total flux cleaned = 0.0736881 Jy ! Component: 150 - total flux cleaned = 0.0942132 Jy ! Component: 200 - total flux cleaned = 0.108497 Jy ! Total flux subtracted in 200 components = 0.108497 Jy ! Clean residual min=-0.030546 max=0.051466 Jy/beam ! Clean residual mean=0.000000 rms=0.009079 Jy/beam ! Combined flux in latest and established models = 0.815738 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 125 components and 0.815738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.712184Jy sigma=2.456011 ! Fit after self-cal, rms=0.714136Jy sigma=2.454983 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (19, -49.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0410434 Jy ! Component: 100 - total flux cleaned = 0.0439355 Jy ! Component: 150 - total flux cleaned = 0.04554 Jy ! Component: 200 - total flux cleaned = 0.0484341 Jy ! Total flux subtracted in 200 components = 0.0484341 Jy ! Clean residual min=-0.028432 max=0.035092 Jy/beam ! Clean residual mean=0.000009 rms=0.008049 Jy/beam ! Combined flux in latest and established models = 0.864172 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 146 components and 0.864172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.697293Jy sigma=2.472905 ! Fit after self-cal, rms=0.695894Jy sigma=2.470965 ! Inverting map ! Added new window around map position (38, -97). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0307685 Jy ! Component: 100 - total flux cleaned = 0.0434826 Jy ! Component: 150 - total flux cleaned = 0.048881 Jy ! Component: 200 - total flux cleaned = 0.0501139 Jy ! Total flux subtracted in 200 components = 0.0501139 Jy ! Clean residual min=-0.026570 max=0.031540 Jy/beam ! Clean residual mean=0.000020 rms=0.007355 Jy/beam ! Combined flux in latest and established models = 0.914286 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 169 components and 0.914286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.684427Jy sigma=2.436411 ! Fit after self-cal, rms=0.684153Jy sigma=2.435424 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.684153Jy sigma=2.435424 ! Fit after self-cal, rms=0.727778Jy sigma=2.389312 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.496 mas, bmaj=14.51 mas, bpa=9.965 degrees ! Estimated noise=4.71779 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0586588 Jy ! Component: 100 - total flux cleaned = 0.0950865 Jy ! Component: 150 - total flux cleaned = 0.120372 Jy ! Component: 200 - total flux cleaned = 0.13364 Jy ! Total flux subtracted in 200 components = 0.13364 Jy ! Clean residual min=-0.033508 max=0.043649 Jy/beam ! Clean residual mean=0.000006 rms=0.010451 Jy/beam ! Combined flux in latest and established models = 1.04793 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 192 components and 1.04793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.706392Jy sigma=2.422331 ! Fit after self-cal, rms=0.708072Jy sigma=2.420825 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00908664 Jy ! Component: 100 - total flux cleaned = 0.0120588 Jy ! Component: 150 - total flux cleaned = 0.0134274 Jy ! Component: 200 - total flux cleaned = 0.0153217 Jy ! Total flux subtracted in 200 components = 0.0153217 Jy ! Clean residual min=-0.031950 max=0.040525 Jy/beam ! Clean residual mean=0.000015 rms=0.009620 Jy/beam ! Combined flux in latest and established models = 1.06325 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 209 components and 1.06325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.703130Jy sigma=2.409020 ! Fit after self-cal, rms=0.703590Jy sigma=2.406625 ! Inverting map ! Added new window around map position (-99.5, -108). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0395218 Jy ! Component: 100 - total flux cleaned = 0.0456236 Jy ! Component: 150 - total flux cleaned = 0.0519156 Jy ! Component: 200 - total flux cleaned = 0.0567827 Jy ! Total flux subtracted in 200 components = 0.0567827 Jy ! Clean residual min=-0.027926 max=0.029257 Jy/beam ! Clean residual mean=0.000036 rms=0.008069 Jy/beam ! Combined flux in latest and established models = 1.12003 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 239 components and 1.12003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.694356Jy sigma=2.402907 ! Fit after self-cal, rms=0.693866Jy sigma=2.401589 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.408 mas, bmaj=14.92 mas, bpa=6.079 degrees ! Estimated noise=2.66253 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.408 x 14.92 at 6.079 degrees (North through East) ! Clean map min=-0.033061 max=0.35032 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.015 mas, bmaj=15.41 mas, bpa=7.224 degrees ! Estimated noise=4.38867 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.16077 Jy ! Component: 100 - total flux cleaned = 0.250159 Jy ! Component: 150 - total flux cleaned = 0.323782 Jy ! Component: 200 - total flux cleaned = 0.387858 Jy ! Total flux subtracted in 200 components = 0.387858 Jy ! Clean residual min=-0.043198 max=0.067954 Jy/beam ! Clean residual mean=-0.000001 rms=0.016503 Jy/beam ! Combined flux in latest and established models = 0.387858 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.387858 Jy ! Inverting map and beam ! Estimated beam: bmin=2.408 mas, bmaj=14.92 mas, bpa=6.079 degrees ! Estimated noise=2.66253 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (26.5, -64.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110733 Jy ! Component: 100 - total flux cleaned = 0.194649 Jy ! Component: 150 - total flux cleaned = 0.262781 Jy ! Component: 200 - total flux cleaned = 0.32011 Jy ! Total flux subtracted in 200 components = 0.32011 Jy ! Clean residual min=-0.030648 max=0.056349 Jy/beam ! Clean residual mean=-0.000030 rms=0.010286 Jy/beam ! Combined flux in latest and established models = 0.707968 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 45 components and 0.707968 Jy ! Inverting map ! Added new window around map position (-38, 98). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.056533 Jy ! Component: 100 - total flux cleaned = 0.100264 Jy ! Component: 150 - total flux cleaned = 0.137867 Jy ! Component: 200 - total flux cleaned = 0.170906 Jy ! Total flux subtracted in 200 components = 0.170906 Jy ! Clean residual min=-0.027010 max=0.038211 Jy/beam ! Clean residual mean=-0.000007 rms=0.007469 Jy/beam ! Combined flux in latest and established models = 0.878874 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 74 components and 0.878874 Jy ! Inverting map ! Added new window around map position (9, 21.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0373585 Jy ! Component: 100 - total flux cleaned = 0.0666949 Jy ! Component: 150 - total flux cleaned = 0.0889551 Jy ! Component: 200 - total flux cleaned = 0.105507 Jy ! Total flux subtracted in 200 components = 0.105507 Jy ! Clean residual min=-0.023998 max=0.031605 Jy/beam ! Clean residual mean=0.000000 rms=0.006572 Jy/beam ! Combined flux in latest and established models = 0.984381 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 103 components and 0.984381 Jy ! Inverting map ! Added new window around map position (15, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0296805 Jy ! Component: 100 - total flux cleaned = 0.049941 Jy ! Component: 150 - total flux cleaned = 0.0643687 Jy ! Component: 200 - total flux cleaned = 0.0763211 Jy ! Total flux subtracted in 200 components = 0.0763211 Jy ! Clean residual min=-0.021279 max=0.026211 Jy/beam ! Clean residual mean=0.000006 rms=0.005860 Jy/beam ! Combined flux in latest and established models = 1.0607 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 119 components and 1.0607 Jy ! Inverting map ! Added new window around map position (-8.5, -20.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133878 Jy ! Component: 100 - total flux cleaned = 0.0223921 Jy ! Component: 150 - total flux cleaned = 0.0329001 Jy ! Component: 200 - total flux cleaned = 0.042152 Jy ! Total flux subtracted in 200 components = 0.042152 Jy ! Clean residual min=-0.018835 max=0.024115 Jy/beam ! Clean residual mean=0.000007 rms=0.005416 Jy/beam ! Combined flux in latest and established models = 1.10285 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 148 components and 1.10285 Jy ! Inverting map ! Added new window around map position (101.5, 107). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0200339 Jy ! Component: 100 - total flux cleaned = 0.0275992 Jy ! Component: 150 - total flux cleaned = 0.0327317 Jy ! Component: 200 - total flux cleaned = 0.0400458 Jy ! Total flux subtracted in 200 components = 0.0400458 Jy ! Clean residual min=-0.017731 max=0.018875 Jy/beam ! Clean residual mean=0.000011 rms=0.005037 Jy/beam ! Combined flux in latest and established models = 1.1429 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 170 components and 1.1429 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.496 mas, bmaj=14.51 mas, bpa=9.965 degrees ! Estimated noise=4.71779 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0284419 Jy ! Component: 100 - total flux cleaned = 0.0453592 Jy ! Component: 150 - total flux cleaned = 0.057024 Jy ! Component: 200 - total flux cleaned = 0.0628982 Jy ! Total flux subtracted in 200 components = 0.0628982 Jy ! Clean residual min=-0.027312 max=0.024388 Jy/beam ! Clean residual mean=0.000057 rms=0.007198 Jy/beam ! Combined flux in latest and established models = 1.2058 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00319213 Jy ! Component: 100 - total flux cleaned = 0.00702627 Jy ! Component: 150 - total flux cleaned = 0.00775035 Jy ! Component: 200 - total flux cleaned = 0.00987853 Jy ! Total flux subtracted in 200 components = 0.00987853 Jy ! Clean residual min=-0.024928 max=0.022522 Jy/beam ! Clean residual mean=0.000065 rms=0.006780 Jy/beam ! Combined flux in latest and established models = 1.21568 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 220 components and 1.21568 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.408 mas, bmaj=14.92 mas, bpa=6.079 degrees ! Estimated noise=2.66253 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0016893 Jy ! Component: 100 - total flux cleaned = -0.00111725 Jy ! Component: 150 - total flux cleaned = 0.00112427 Jy ! Component: 200 - total flux cleaned = 0.00268683 Jy ! Total flux subtracted in 200 components = 0.00268683 Jy ! Clean residual min=-0.017704 max=0.018851 Jy/beam ! Clean residual mean=0.000021 rms=0.004724 Jy/beam ! Combined flux in latest and established models = 1.21836 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 264 components and 1.21836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.660533Jy sigma=2.373317 ! Fit after self-cal, rms=0.657742Jy sigma=2.371554 wmodel /g0/scr/pima/npcsb_uvs/J1233+8054_S_map.mod ! Writing 264 model components to file: /g0/scr/pima/npcsb_uvs/J1233+8054_S_map.mod wobs /g0/scr/pima/npcsb_uvs/J1233+8054_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1233+8054_S_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J1233+8054_S_map.win ! wwins: Wrote 12 windows to /g0/scr/pima/npcsb_uvs/J1233+8054_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00793093 Jy ! Component: 100 - total flux cleaned = 0.013349 Jy ! Component: 150 - total flux cleaned = 0.0182446 Jy ! Component: 200 - total flux cleaned = 0.0232867 Jy ! Component: 250 - total flux cleaned = 0.027906 Jy ! Component: 300 - total flux cleaned = 0.0318496 Jy ! Component: 350 - total flux cleaned = 0.0359772 Jy ! Component: 400 - total flux cleaned = 0.0400171 Jy ! Component: 450 - total flux cleaned = 0.0437152 Jy ! Component: 500 - total flux cleaned = 0.0465682 Jy ! Component: 550 - total flux cleaned = 0.0493803 Jy ! Component: 600 - total flux cleaned = 0.0526509 Jy ! Component: 650 - total flux cleaned = 0.0561207 Jy ! Component: 700 - total flux cleaned = 0.0595422 Jy ! Component: 750 - total flux cleaned = 0.0626826 Jy ! Component: 800 - total flux cleaned = 0.0660248 Jy ! Component: 850 - total flux cleaned = 0.0688585 Jy ! Component: 900 - total flux cleaned = 0.0725933 Jy ! Component: 950 - total flux cleaned = 0.0758264 Jy ! Component: 1000 - total flux cleaned = 0.0787963 Jy ! Component: 1050 - total flux cleaned = 0.0824148 Jy ! Component: 1100 - total flux cleaned = 0.0853239 Jy ! Component: 1150 - total flux cleaned = 0.0879836 Jy ! Component: 1200 - total flux cleaned = 0.0908377 Jy ! Component: 1250 - total flux cleaned = 0.0936645 Jy ! Component: 1300 - total flux cleaned = 0.0962506 Jy ! Component: 1350 - total flux cleaned = 0.099241 Jy ! Component: 1400 - total flux cleaned = 0.102203 Jy ! Component: 1450 - total flux cleaned = 0.105349 Jy ! Component: 1500 - total flux cleaned = 0.108469 Jy ! Component: 1550 - total flux cleaned = 0.111357 Jy ! Component: 1600 - total flux cleaned = 0.11402 Jy ! Component: 1650 - total flux cleaned = 0.116258 Jy ! Component: 1700 - total flux cleaned = 0.118482 Jy ! Component: 1750 - total flux cleaned = 0.121291 Jy ! Component: 1800 - total flux cleaned = 0.123482 Jy ! Component: 1850 - total flux cleaned = 0.126056 Jy ! Component: 1900 - total flux cleaned = 0.128416 Jy ! Component: 1950 - total flux cleaned = 0.12998 Jy ! Component: 2000 - total flux cleaned = 0.1327 Jy ! Component: 2050 - total flux cleaned = 0.135014 Jy ! Component: 2100 - total flux cleaned = 0.13693 Jy ! Component: 2150 - total flux cleaned = 0.139028 Jy ! Component: 2200 - total flux cleaned = 0.140543 Jy ! Component: 2250 - total flux cleaned = 0.14224 Jy ! Component: 2300 - total flux cleaned = 0.144112 Jy ! Component: 2350 - total flux cleaned = 0.145972 Jy ! Component: 2400 - total flux cleaned = 0.147081 Jy ! Component: 2450 - total flux cleaned = 0.148552 Jy ! Component: 2500 - total flux cleaned = 0.149651 Jy ! Component: 2550 - total flux cleaned = 0.150926 Jy ! Component: 2600 - total flux cleaned = 0.152555 Jy ! Component: 2650 - total flux cleaned = 0.153995 Jy ! Component: 2700 - total flux cleaned = 0.155248 Jy ! Component: 2750 - total flux cleaned = 0.156673 Jy ! Component: 2800 - total flux cleaned = 0.158267 Jy ! Component: 2850 - total flux cleaned = 0.159324 Jy ! Component: 2900 - total flux cleaned = 0.161077 Jy ! Component: 2950 - total flux cleaned = 0.16195 Jy ! Component: 3000 - total flux cleaned = 0.163514 Jy ! Component: 3050 - total flux cleaned = 0.164207 Jy ! Component: 3100 - total flux cleaned = 0.165757 Jy ! Component: 3150 - total flux cleaned = 0.167299 Jy ! Component: 3200 - total flux cleaned = 0.168152 Jy ! Component: 3250 - total flux cleaned = 0.169002 Jy ! Component: 3300 - total flux cleaned = 0.170188 Jy ! Component: 3350 - total flux cleaned = 0.171704 Jy ! Component: 3400 - total flux cleaned = 0.172877 Jy ! Component: 3450 - total flux cleaned = 0.173878 Jy ! Component: 3500 - total flux cleaned = 0.175207 Jy ! Component: 3550 - total flux cleaned = 0.176532 Jy ! Component: 3600 - total flux cleaned = 0.177519 Jy ! Component: 3650 - total flux cleaned = 0.178668 Jy ! Component: 3700 - total flux cleaned = 0.179484 Jy ! Component: 3750 - total flux cleaned = 0.180623 Jy ! Component: 3800 - total flux cleaned = 0.181757 Jy ! Component: 3850 - total flux cleaned = 0.182726 Jy ! Component: 3900 - total flux cleaned = 0.184011 Jy ! Component: 3950 - total flux cleaned = 0.184652 Jy ! Component: 4000 - total flux cleaned = 0.18545 Jy ! Component: 4050 - total flux cleaned = 0.186722 Jy ! Total flux subtracted in 4096 components = 0.187357 Jy ! Clean residual min=-0.008320 max=0.008691 Jy/beam ! Clean residual mean=0.000018 rms=0.003028 Jy/beam ! Combined flux in latest and established models = 1.40572 Jy keep ! Adding 236 model components to the UV plane model. ! The established model now contains 499 components and 1.40572 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J1233+8054_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.408 x 14.92 at 6.079 degrees (North through East) ! Clean map min=-0.024549 max=0.32059 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1233+8054_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.320587 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00302574 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.83144 2.83144 5.66288 11.3258 22.6515 45.303 90.6061 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.32 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J1233+8054_S_uvs.log closed on Sat Oct 5 18:59:06 2013