! Started logfile: /g0/scr/pima/npcsb_uvs/J1223+8436_S_uvs.log on Sat Oct  5 18:58:56 2013
obs /g0/scr/pima/npcsb_uvs/J1223+8436_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1223+8436_S_uva.fits
! AN table 1: 46 integrations on 45 of 45 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J1223+8436
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 8280 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1223+8436_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.007391Jy  sigma=0.996780
! Fit after  self-cal, rms=0.910724Jy  sigma=0.846578
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.33 mas, bmaj=10.59 mas, bpa=7.462 degrees
! Estimated noise=17.555 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0869173 Jy
! Component: 100  -  total flux cleaned = 0.110803 Jy
! Total flux subtracted in 100 components = 0.110803 Jy
! Clean residual min=-0.007930 max=0.010326 Jy/beam
! Clean residual mean=-0.000005 rms=0.001992 Jy/beam
! Combined flux in latest and established models = 0.110803 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.110803 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097442Jy  sigma=0.107531
! Fit after  self-cal, rms=0.096930Jy  sigma=0.107129
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.106 mas, bmaj=11.07 mas, bpa=6.535 degrees
! Estimated noise=8.77973 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0176359 Jy
! Component: 100  -  total flux cleaned = 0.0261349 Jy
! Component: 150  -  total flux cleaned = 0.0311031 Jy
! Component: 200  -  total flux cleaned = 0.0343189 Jy
! Total flux subtracted in 200 components = 0.0343189 Jy
! Clean residual min=-0.006349 max=0.005047 Jy/beam
! Clean residual mean=0.000005 rms=0.001470 Jy/beam
! Combined flux in latest and established models = 0.145121 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 50 components and 0.145121 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098810Jy  sigma=0.100272
! Fit after  self-cal, rms=0.098762Jy  sigma=0.100182
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.87     HN        0.85     KP        0.89     
!   LA        0.96     MK        0.82     NL        0.99     OV        0.98     
!   PT        1.09     SC        0.81     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        0.91     KP        0.90     
!   LA        0.94     MK        0.81     NL        0.90     OV        1.00     
!   PT        0.94     SC        0.86     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.23     FD        1.02     HN        0.96     KP        0.97     
!   LA        0.74     MK        0.88     NL        1.00     OV        0.96     
!   PT        1.10     SC        0.75     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.92     HN        0.83     KP        0.89     
!   LA        0.60     MK        1.00     NL        0.98     OV        0.82     
!   PT        0.94     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.098762Jy  sigma=0.100182
! Fit after  self-cal, rms=0.087198Jy  sigma=0.093729
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.039 mas, bmaj=11.1 mas, bpa=6.469 degrees
! Estimated noise=7.3462 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0145905 Jy
! Component: 100  -  total flux cleaned = -0.0174684 Jy
! Component: 150  -  total flux cleaned = -0.0175639 Jy
! Component: 200  -  total flux cleaned = -0.017698 Jy
! Total flux subtracted in 200 components = -0.017698 Jy
! Clean residual min=-0.002911 max=0.002932 Jy/beam
! Clean residual mean=0.000001 rms=0.000704 Jy/beam
! Combined flux in latest and established models = 0.127423 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 62 components and 0.127423 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080410Jy  sigma=0.095997
! Fit after  self-cal, rms=0.080618Jy  sigma=0.095861
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080618Jy  sigma=0.095861
! Fit after  self-cal, rms=0.074366Jy  sigma=0.093482
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.995 mas, bmaj=11.09 mas, bpa=6.61 degrees
! Estimated noise=6.2771 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0123405 Jy
! Component: 100  -  total flux cleaned = -0.0154329 Jy
! Component: 150  -  total flux cleaned = -0.0161231 Jy
! Component: 200  -  total flux cleaned = -0.0162124 Jy
! Total flux subtracted in 200 components = -0.0162124 Jy
! Clean residual min=-0.002454 max=0.002480 Jy/beam
! Clean residual mean=0.000001 rms=0.000602 Jy/beam
! Combined flux in latest and established models = 0.111211 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 78 components and 0.111211 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068624Jy  sigma=0.095842
! Fit after  self-cal, rms=0.068631Jy  sigma=0.095837
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.59212e-05 Jy
! Component: 100  -  total flux cleaned = -0.000148863 Jy
! Component: 150  -  total flux cleaned = -0.00023422 Jy
! Component: 200  -  total flux cleaned = -0.000283267 Jy
! Total flux subtracted in 200 components = -0.000283267 Jy
! Clean residual min=-0.002390 max=0.002339 Jy/beam
! Clean residual mean=0.000000 rms=0.000590 Jy/beam
! Combined flux in latest and established models = 0.110928 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 84 components and 0.110928 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068512Jy  sigma=0.095917
! Fit after  self-cal, rms=0.068507Jy  sigma=0.095915
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068507Jy  sigma=0.095915
! Fit after  self-cal, rms=0.063076Jy  sigma=0.093399
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.954 mas, bmaj=11.08 mas, bpa=6.705 degrees
! Estimated noise=5.34898 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0102639 Jy
! Component: 100  -  total flux cleaned = -0.0129346 Jy
! Component: 150  -  total flux cleaned = -0.0140397 Jy
! Component: 200  -  total flux cleaned = -0.0143688 Jy
! Total flux subtracted in 200 components = -0.0143688 Jy
! Clean residual min=-0.002079 max=0.002085 Jy/beam
! Clean residual mean=0.000000 rms=0.000508 Jy/beam
! Combined flux in latest and established models = 0.0965589 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 88 components and 0.0965589 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058254Jy  sigma=0.095882
! Fit after  self-cal, rms=0.058249Jy  sigma=0.095877
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.54191e-05 Jy
! Component: 100  -  total flux cleaned = 2.40014e-05 Jy
! Component: 150  -  total flux cleaned = 2.41605e-05 Jy
! Component: 200  -  total flux cleaned = 5.23105e-05 Jy
! Total flux subtracted in 200 components = 5.23105e-05 Jy
! Clean residual min=-0.002090 max=0.002081 Jy/beam
! Clean residual mean=0.000000 rms=0.000504 Jy/beam
! Combined flux in latest and established models = 0.0966112 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 93 components and 0.0966112 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058218Jy  sigma=0.095901
! Fit after  self-cal, rms=0.058217Jy  sigma=0.095899
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058217Jy  sigma=0.095899
! Fit after  self-cal, rms=0.053704Jy  sigma=0.093381
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.034 mas, bmaj=13.17 mas, bpa=2.932 degrees
! Estimated noise=5.868 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00900083 Jy
! Component: 100  -  total flux cleaned = -0.0111951 Jy
! Component: 150  -  total flux cleaned = -0.0120868 Jy
! Component: 200  -  total flux cleaned = -0.0124981 Jy
! Total flux subtracted in 200 components = -0.0124981 Jy
! Clean residual min=-0.002201 max=0.001887 Jy/beam
! Clean residual mean=-0.000001 rms=0.000530 Jy/beam
! Combined flux in latest and established models = 0.0841131 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 107 components and 0.0841131 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049688Jy  sigma=0.095806
! Fit after  self-cal, rms=0.049669Jy  sigma=0.095790
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000164103 Jy
! Component: 100  -  total flux cleaned = -0.000202963 Jy
! Component: 150  -  total flux cleaned = -0.000215891 Jy
! Component: 200  -  total flux cleaned = -0.000209963 Jy
! Total flux subtracted in 200 components = -0.000209963 Jy
! Clean residual min=-0.002143 max=0.001830 Jy/beam
! Clean residual mean=-0.000001 rms=0.000523 Jy/beam
! Combined flux in latest and established models = 0.0839031 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 110 components and 0.0839031 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049651Jy  sigma=0.095826
! Fit after  self-cal, rms=0.049659Jy  sigma=0.095820
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.921 mas, bmaj=11.08 mas, bpa=6.794 degrees
! Estimated noise=4.55817 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.921 x 11.08 at 6.794 degrees (North through East)
! Clean map  min=-0.0017796  max=0.062432 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.196 mas, bmaj=10.69 mas, bpa=7.766 degrees
! Estimated noise=8.74299 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0433521 Jy
! Component: 100  -  total flux cleaned = 0.0577063 Jy
! Component: 150  -  total flux cleaned = 0.0651826 Jy
! Component: 200  -  total flux cleaned = 0.0698772 Jy
! Total flux subtracted in 200 components = 0.0698772 Jy
! Clean residual min=-0.003113 max=0.003390 Jy/beam
! Clean residual mean=-0.000002 rms=0.000849 Jy/beam
! Combined flux in latest and established models = 0.0698772 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.0698772 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.921 mas, bmaj=11.08 mas, bpa=6.794 degrees
! Estimated noise=4.55817 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00571717 Jy
! Component: 100  -  total flux cleaned = 0.00882177 Jy
! Component: 150  -  total flux cleaned = 0.0108377 Jy
! Component: 200  -  total flux cleaned = 0.0121876 Jy
! Total flux subtracted in 200 components = 0.0121876 Jy
! Clean residual min=-0.001884 max=0.001786 Jy/beam
! Clean residual mean=-0.000001 rms=0.000458 Jy/beam
! Combined flux in latest and established models = 0.0820648 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 52 components and 0.0820648 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.034 mas, bmaj=13.17 mas, bpa=2.932 degrees
! Estimated noise=5.868 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00140476 Jy
! Component: 100  -  total flux cleaned = 0.00184479 Jy
! Component: 150  -  total flux cleaned = 0.00189923 Jy
! Component: 200  -  total flux cleaned = 0.00191515 Jy
! Total flux subtracted in 200 components = 0.00191515 Jy
! Clean residual min=-0.001945 max=0.001963 Jy/beam
! Clean residual mean=-0.000001 rms=0.000525 Jy/beam
! Combined flux in latest and established models = 0.08398 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.36501e-07 Jy
! Component: 100  -  total flux cleaned = 1.43597e-05 Jy
! Component: 150  -  total flux cleaned = 2.80967e-05 Jy
! Component: 200  -  total flux cleaned = 4.07171e-05 Jy
! Total flux subtracted in 200 components = 4.07171e-05 Jy
! Clean residual min=-0.001969 max=0.001901 Jy/beam
! Clean residual mean=-0.000001 rms=0.000521 Jy/beam
! Combined flux in latest and established models = 0.0840207 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 60 components and 0.0840207 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.921 mas, bmaj=11.08 mas, bpa=6.794 degrees
! Estimated noise=4.55817 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000149935 Jy
! Component: 100  -  total flux cleaned = -7.59434e-05 Jy
! Component: 150  -  total flux cleaned = -2.88483e-05 Jy
! Component: 200  -  total flux cleaned = 1.34481e-05 Jy
! Total flux subtracted in 200 components = 1.34481e-05 Jy
! Clean residual min=-0.001856 max=0.001815 Jy/beam
! Clean residual mean=0.000000 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.0840342 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 67 components and 0.0840342 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049504Jy  sigma=0.096038
! Fit after  self-cal, rms=0.049504Jy  sigma=0.096026
wmodel /g0/scr/pima/npcsb_uvs/J1223+8436_S_map.mod
! Writing 67 model components to file: /g0/scr/pima/npcsb_uvs/J1223+8436_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J1223+8436_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1223+8436_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J1223+8436_S_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsb_uvs/J1223+8436_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -7.0398e-05 Jy
! Component: 100  -  total flux cleaned = -0.000101059 Jy
! Component: 150  -  total flux cleaned = -0.000157815 Jy
! Component: 200  -  total flux cleaned = -0.00021216 Jy
! Component: 250  -  total flux cleaned = -0.000289972 Jy
! Component: 300  -  total flux cleaned = -0.000315283 Jy
! Component: 350  -  total flux cleaned = -0.000339542 Jy
! Component: 400  -  total flux cleaned = -0.000363243 Jy
! Component: 450  -  total flux cleaned = -0.000340323 Jy
! Component: 500  -  total flux cleaned = -0.000251408 Jy
! Component: 550  -  total flux cleaned = -0.000208207 Jy
! Component: 600  -  total flux cleaned = -0.000123609 Jy
! Component: 650  -  total flux cleaned = -8.24915e-05 Jy
! Component: 700  -  total flux cleaned = -4.25441e-05 Jy
! Component: 750  -  total flux cleaned = 1.72384e-05 Jy
! Component: 800  -  total flux cleaned = 0.00013418 Jy
! Component: 850  -  total flux cleaned = 0.000211026 Jy
! Component: 900  -  total flux cleaned = 0.000324185 Jy
! Component: 950  -  total flux cleaned = 0.000416629 Jy
! Component: 1000  -  total flux cleaned = 0.00045326 Jy
! Component: 1050  -  total flux cleaned = 0.00050752 Jy
! Component: 1100  -  total flux cleaned = 0.000595996 Jy
! Component: 1150  -  total flux cleaned = 0.000596054 Jy
! Component: 1200  -  total flux cleaned = 0.000630386 Jy
! Component: 1250  -  total flux cleaned = 0.000698775 Jy
! Component: 1300  -  total flux cleaned = 0.000799615 Jy
! Component: 1350  -  total flux cleaned = 0.00086588 Jy
! Component: 1400  -  total flux cleaned = 0.000849245 Jy
! Component: 1450  -  total flux cleaned = 0.000930219 Jy
! Component: 1500  -  total flux cleaned = 0.000994188 Jy
! Component: 1550  -  total flux cleaned = 0.00101012 Jy
! Component: 1600  -  total flux cleaned = 0.00113505 Jy
! Component: 1650  -  total flux cleaned = 0.00119661 Jy
! Component: 1700  -  total flux cleaned = 0.00127284 Jy
! Component: 1750  -  total flux cleaned = 0.00127282 Jy
! Component: 1800  -  total flux cleaned = 0.0013327 Jy
! Component: 1850  -  total flux cleaned = 0.0014068 Jy
! Component: 1900  -  total flux cleaned = 0.00145086 Jy
! Component: 1950  -  total flux cleaned = 0.00153798 Jy
! Component: 2000  -  total flux cleaned = 0.00155222 Jy
! Component: 2050  -  total flux cleaned = 0.00158087 Jy
! Component: 2100  -  total flux cleaned = 0.00167986 Jy
! Component: 2150  -  total flux cleaned = 0.00170773 Jy
! Component: 2200  -  total flux cleaned = 0.0017911 Jy
! Component: 2250  -  total flux cleaned = 0.0018598 Jy
! Component: 2300  -  total flux cleaned = 0.00192806 Jy
! Component: 2350  -  total flux cleaned = 0.0019552 Jy
! Component: 2400  -  total flux cleaned = 0.00198223 Jy
! Component: 2450  -  total flux cleaned = 0.00198244 Jy
! Component: 2500  -  total flux cleaned = 0.00203536 Jy
! Component: 2550  -  total flux cleaned = 0.00203548 Jy
! Component: 2600  -  total flux cleaned = 0.00210052 Jy
! Component: 2650  -  total flux cleaned = 0.00212617 Jy
! Component: 2700  -  total flux cleaned = 0.00212612 Jy
! Component: 2750  -  total flux cleaned = 0.00213877 Jy
! Component: 2800  -  total flux cleaned = 0.00218928 Jy
! Component: 2850  -  total flux cleaned = 0.00223933 Jy
! Component: 2900  -  total flux cleaned = 0.00228897 Jy
! Component: 2950  -  total flux cleaned = 0.00232594 Jy
! Component: 3000  -  total flux cleaned = 0.00235036 Jy
! Component: 3050  -  total flux cleaned = 0.00243545 Jy
! Component: 3100  -  total flux cleaned = 0.00247154 Jy
! Component: 3150  -  total flux cleaned = 0.00251944 Jy
! Component: 3200  -  total flux cleaned = 0.00259086 Jy
! Component: 3250  -  total flux cleaned = 0.00264998 Jy
! Component: 3300  -  total flux cleaned = 0.00263822 Jy
! Component: 3350  -  total flux cleaned = 0.00267325 Jy
! Component: 3400  -  total flux cleaned = 0.0027313 Jy
! Component: 3450  -  total flux cleaned = 0.00280029 Jy
! Component: 3500  -  total flux cleaned = 0.0028002 Jy
! Component: 3550  -  total flux cleaned = 0.00286847 Jy
! Component: 3600  -  total flux cleaned = 0.00285727 Jy
! Component: 3650  -  total flux cleaned = 0.00295857 Jy
! Component: 3700  -  total flux cleaned = 0.00300329 Jy
! Component: 3750  -  total flux cleaned = 0.00301449 Jy
! Component: 3800  -  total flux cleaned = 0.00304763 Jy
! Component: 3850  -  total flux cleaned = 0.00306968 Jy
! Component: 3900  -  total flux cleaned = 0.00310245 Jy
! Component: 3950  -  total flux cleaned = 0.00316767 Jy
! Component: 4000  -  total flux cleaned = 0.00323237 Jy
! Component: 4050  -  total flux cleaned = 0.00327526 Jy
! Total flux subtracted in 4096 components = 0.00322184 Jy
! Clean residual min=-0.000869 max=0.000702 Jy/beam
! Clean residual mean=0.000000 rms=0.000204 Jy/beam
! Combined flux in latest and established models = 0.087256 Jy
keep
! Adding 298 model components to the UV plane model.
! The established model now contains 365 components and 0.0872559 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J1223+8436_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.921 x 11.08 at 6.794 degrees (North through East)
! Clean map  min=-0.0016239  max=0.062312 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1223+8436_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0623123 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00020361 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.98027 0.98027 1.96054 3.92108 7.84216 15.6843 31.3686 62.7373
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0006 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.062 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J1223+8436_S_uvs.log closed on Sat Oct  5 18:59:00 2013